Materials Science and Engineering Commons^™

A Comparison On Structural Sensitive Adsorption Of Sb On Au Single Crystalline Electrodes, Jia-Wei Yang, Wang-Huo Shang, Qiong Wu, Bing-Wei Mao

Journal of Electrochemistry

We compare the behaviors of irreversible adsorption of Sb(III) and its reduction, underpotential deposition of Sbon Au(111) and Au(100) as well as mutual interactions of the processes. Based on in-situ scanning tunneling microscopic and cyclic voltammetric results, the substrate structure not only influence anion adsorptionbehavior and thus the Sb adsorption structure, but also the stability of its own structure. On Au(111) surface,the irreversibly adsorbed dense and disordered SbO⁺ film structure remains after reduction of the film; while on Au(100)surface, due to the coadsorption of SO₄^2-, an ordered(2×2)structure is formed after reduction. UPD of Sb on Au(111) …

Preparation And Characterization Of Mcm-41/Pvdf-Hfp Composite Microporous Polymer Electrolytes For Li-Ion Batteries, Zuo-Feng Chen, Yan-Xia Jiang, Quan-Chao Zhuang, Quan-Feng Dong, Shi-Gang Sun

Journal of Electrochemistry

MCM-41/vinylidine fluoride-hexafluropropene copolymer (PVdF-HFP) composite microporous polymer electrolytes were prepared with mixed solvent of N, N-Dimethylformamide (DMF) and acetone. The influence of MCM-41 and nano-SiO₂ on the porous structure of the microporous polymer electrolytes were studied with SEM. The results show that MCM-41 could take the place of the plasticizer in the process of making pores, and bring the preparation of microporous membranes easily. The preliminary electrochemical tests showed that the ion conductivity of composite microporous polymer electrolyte with 10% MCM-41 was about 10^-3 S cm^-1, and the performance of batteries was improved. The mesoporous MCM-41selected …

Electrochemical Stability Of Pva Alkaline Gel Polymer Electrolyte Membranes, Jun-Hong Wang, Jian-Min Liu, Hua-Bin Yang, Zuo-Xiang Zhou

Journal of Electrochemistry

Polyvinyl alcohol (PVA) alkaline polymer gel electrolyte (GPE) membranes were successfully prepared by a solution-casting technique and their electrochemical stabilities were investigated. The electrochemical impedance spectrum (EIS) results showed that the ionic conductivity of the PVA alkaline GPE membranes first increased with the increase of KOH content, then decreased with the further increase of KOH. When the weight percentage of the KOH in the PVA alkaline GPE membrane approached to 42%, it exhibitedthe highest ionic conductivity of 2.01×10^-3 S/cm at room temperature (R.T.). The X-ray diffraction (XRD) results revealed that with the increase of KOH the crystalline of the …

A Preliminary Study Of Electrocrystallization Of Bismuth On Glassy Carbon, Min-Li Yang, Zhan-Jun Zhang

Journal of Electrochemistry

The electrocrystallization of bismuth on glassy carbon electrodes (GCEs) from nitrate solutions was studied by cyclic voltammetry and chronoamperometry. Cyclic voltammograms exhibit a crossover between the cathodic and anodic branches, characteristic of the formation of bismuth nuclei on GCEs, and show that the bismuth electrocrystallization on GCEs is a diffusion-controlled reaction. The current transients were analyzed with the Scharifker and the Heerman equations. With the increaseof Bi³⁺ concentration, the non-dimensional plots leaned to the theoretical curve for 3D instantaneous nucleation and growth. The overpotential dependence of nucleation and growth mechanism was also found. With the increase of overpotential, the …

The Preparation And Performance Of The Aqueous Matrix For Molten Carbonate Fuel Cells, Hua-Xin Lin, Mo-Jie Ceng, Bao-Lian Yi

Journal of Electrochemistry

PVA matrix of MCFC was prepared from the α-LiAlO₂ powder, and polyvinylalcohol(PVA), Compared with the conventional PVB matrix, higher porosity, higher thermal weight loss and smaller maximum pore diameter were achieved for PVA matrix. Single cell was assembled with PVA matrix. At reaction gas pressure of 0.9 MPa, under reaction gas utilization of 20%, at 300 and 428.57 mA·cm^-2, the cell voltage was 0.849 and 0.739 V respectively, and the output power density was 254.7 and 316.7 mW·cm^-2 respectively, which are higher than those of the cell assembled with PVB matrix. During thermal cycles, the cell …

Initial Process Of Pyrophosphate Copper Electroplating, Shao-Bin Feng, Shi-Bo Shang, Li-Ting Feng

Journal of Electrochemistry

The relationship between the type of on changes of copper electroplating potential time and the adhesion of coating layer was examined by chronopotentiometry. The conception of critical initial current density D_KC was put forward. When the initial working current D_KI was higher than the critical initial current, the iron electrodewas polarized to activation potential of iron surface firstly, then to the activation of the substratesurface, and finally to depositionpotentialof copper ion. The coating deposited on the active surface and had goodadhesion. On the contrary ,when D_KI was lower than D_KC, the coating deposits on the …

Structure And Corrosion Electrochemical Properties Of Self-Assembled (3-Mercaptopropyl) Trimethoxysilane Films On Copper Electrode, Ling Huang, Ke-Fa Lin, Fang-Zu Yang, Shu-Kai Xu, Shao-Min Zhou

Journal of Electrochemistry

A self-assembled monolayer of (3-mercaptopropyl) trimethoxysilane(MPTS) was formed on a electrochemical polished copper surface electrode. The corrosion protection abilities of the monolayer were evaluated in 5% NaCl solution using electrochemical linear polarization. The effects of deposition time and silane concentration on corrosion of copper were also discussed. The surface structure of MPTS films was measured by FT-IR and SEM. It was found that the corrosion resistance of copper was reduced markedly owing to the MPTS monolayers formation on copper. The MPTS monolayer retarded the reduction of dissolved oxygen and inhibited the growth of copper oxide in the NaCl solution. FT-IR …

Ni-Mo-P Alloy By Electroless Deposition And Its Properties, Sen-Lin Wang, Xin-Ren Lan, Ting-Ting Huang, Jun-Mo Jin, Ji-Bei Ling, Zhi-Ming Chen

Journal of Electrochemistry

The electroless Ni-Mo-P alloy has been deposited from the alkaline bath containing boric acid as a buffer agent and sodium citrate as a complexing agent. The effect of deposition parameters, such as pH and concentration of (NH₄)₆Mo₇O₂₄·4H₂O on the plating rate, the composition, the structure and the microhardness of the coating was examined. It was found that the presence of molybdenum has an inhibitory effect on the alloys deposition. As a consequence, the percentage of molybdenumin the Ni-Mo-P coatings never reaches high values, which was lower than 20 at%. It …

Application Of Nickel Foam Electrode For Electroreduction Intermediate Of Purine, Hui-Wen Yang, Xi-En Hu, Xue-Jun Wang

Journal of Electrochemistry

Nickel foam with weight uniformity, good porosity ,pore size and low resistivity as a three-dimensional cathode was used in a filter-press electrochemical reactor. The H₂SO₄ as supporting electrolyte, separator of cation ion exchange membrane, and the lead plate as an anode were used. The cyclic system consisted of electroreduction reactor, pump, store tank and ampere meter. NAU was electroreduced in the cathode chamber of the reactor. Purine intermediate was synthesized with DAU, and the results were compared with those of iron powder reduction process. A peak current in the electroreduction process was detected. The current density of …

The Synthesis, Characteristics And Performance Of Cnt Composites As Anodic Materials In Litium-Ion Battery, Quan-Feng Dong, Ming-Sen Zheng, Zhen-Cai Huang, Ming-Gang Jin, Ya-Ding Zhan, Zu-Geng Lin

Journal of Electrochemistry

As an anodic material for lithium ion battery the carbon nano-tube (CNT) and some compounds based on tin have ever been investigated intensively. The fruited progress has not been made yet, however. In this paper the composites of CNT and Sn/SnO₂ were synthesized employing two methods and characterized by SEM and XRD. And the electrochemical performance of the composites was investigated.

Selective Electroless Copper Plating Micro-Pattern On Ceramics Without Sensitisation And Activation, Zhen-Lin Xu, Qi-Long Guo, Yi-Cheng Shen, Xiong-Chao Zhao, Yan-Ping Hong, Zhi-Jun Gu

Journal of Electrochemistry

The purpose of this article is to provide a new technology of electroless copper plating without palladium activation steps. By combining the technology of laser micro-etching with the new copper-plating bath, copper plating on ceramics was obtained. The experimental results showed that the solution used for copper electroless plating was stable and the copper coating obtained was bright, dense with good electrical conductivity.The line definition was about 40 μm. The electroless Cu films deposited from this system were gentle and required simple operating conditions.

Investigation On Ru-Ti-Ir-Sn Oxide Anode Coatings For Electrolyzing Seawater, Ke Wang, Yan Han, Lei-Yuan Wang, Xiao-Ling Zhang, Yu-Pu Sun

Journal of Electrochemistry

The anode coatings of Ru-Ti-Ir-Sn oxide with various compositions were prepared by thermal decomposition. The physical and electrochemical properties of the coatings were characterized by scanning electron microscope (SEM), energy dispersive X-ray detector (EDX), accelerated life, current efficiency, anti-Mn²⁺ contamination, polarization curveandcyclic voltammetry tests. The results showed thatthe anode coating with optimized formula possessed excellent overall properties for electrolyzing seawater.

Potential Fluctuations Of 7075 Aluminum Alloy Under Thin Electrolyte Layers, Su-Jing Chen, Qing-Ming Yuan, Jian-Ping He, Xiao-Lei Liu

Journal of Electrochemistry

Lens tissues adsorbing 3.5% sodium chloride solution were used to simulate thin electrolyte layers. The 7075 aluminum alloy was immersed under the thin electrolyte layers for 0, 4, 6, 8 and 12 h respectively. Then the fluctuations of natural-corrosion potentials of the alloy were monitored. The fluctuations of natural-corrosion potential were observed rather small in the initial corrosion stages after 6h immersion, and the positive peaks of potential appeared. However the amplitudes reached 20mV after 4h and 12h immersion. The RMS of natural-corrosion potentials decreased with corrosion time at first and then increased. It reached a minimum at 4 h. …

Preparation, Characterization And Electrochemical Properties Of Nano Tio2-Cnt-Pt On Ti Substrate Complex Electrode, Dao-Bao Chu, De-Xiang Feng, Jin-Hua Zhang, Xiao-Hua Li

Journal of Electrochemistry

The nanoTiO₂-CNT-Pt on Ti substrate complex electrodes were prepared from precursor of (Ti(OEt)₄) directly hydrolyzed and by cyclic voltammograms electroplating method . The XRD and SEM results showed that the nano TiO₂ (anatase) particle sizes ranged 5~10 nm and the Pt nanoparticle (average size 9nm) dispersed uniformly on nanoTiO₂-CNT film surface. The electrocatalytic activity of Ti/nanoTiO₂-CNT-Pt electrode was investigated by cyclic voltammetry and chronopotentiogram. The results indicated that the Ti/nanoTiO₂-CNT-Pt electrode exhibited very high electrocatalytic activity and stability for the electro-oxidation of methanol at room temperature. When Pt loading …

Using Electrodeposition To Fabricate Mould For Polymer Microfluidic Chip, Yi Luo, De-Nan Chu, Zhi-Feng Lou, Chong Liu, Li-Ding Wang

Journal of Electrochemistry

Many researches have been focused on polymer microfluidic chip in recent years and the mould plays an important role in its fabrication process. Using electrodepositingmethod to fabricate a metal mould for polymer microfluidic chip has been presented in this paper. An ultra-thick photoresist SU-8 was coated on a pretreated metal plate, after photolithography, nickel was electrodeposited in the patterned SU-8, then was removed the SU-8 to obtain a final metal mould. This methodreduces workload of electrodeposit largely. Applying counter current before deposit, adding additive to solution and vacuum anneal after demould have been used to improve the binding force between …

The Effect Of Oxidant On Structure And Properties Of Pan/Ptfe Conducting Composite Membrane, Chang-Yuan Tao, Jing Chen, Jun Du, Cai-Xin Sun

Journal of Electrochemistry

The PAn/PTFE conducting composite membrane was prepared by means of in-situ permeating chemical polymerization, with (NH₄)₂S₂O₈ and Na₃VO₄ being used as an oxidant respectively. The polymerization-growth behavior of the aniline by using different oxidant was compared. In addition, the oxidant effect on the structure and properties of conducting composite membrane was discussed. The results of SEM micrographs, pore size distribution and electrochemical methods suggested that using either oxidants could also induce the product with small pore size and dense pore structure. Compared with (NH₄)₂S₂O …

Possible Side Reactions Due To Water In Emulsion Polymerization By Late Transition Metal Complexes Ii: Deactivation Of The Catalyst By A Wacker-Type Reaction, Roger L. Dekock, Iordan H. Hristov, Grant D. W. Anderson, Inigo Göttker-Schnetmann

University Faculty Publications and Creative Works

The transition metal catalyzed ethylene polymerization in water suspensions has been increasingly successful in the last couple of years. Water, however, adversely affects the polymerization process by deactivating the catalyst in a Wacker-type reaction. The cationic Pd(II)-diimine Brookhart catalyst 1 is studied here by a combination of quantum mechanics and molecular mechanics to determine the nature of the decomposition reaction. The study considers the decomposition process to take place in two stages. In the first stage, a coordinated olefin is attacked by a hydroxide group to ultimately produce a β-hydroxy-ethyl complex 2. The second step represents a decomposition to acetaldehyde …

Method Of Reducing Internal Stress In Materials, Maher S. Amer, John F. Maguire

Mechanical and Materials Engineering Faculty Publications

Methods are provided for adjusting and controlling the stress between layers of material in a multilayer structure. A first stress is configured in a region of stress on the substrate material. A second material is then deposited over the substrate. A second stress results between the substrate and the second material such that a net stress results where the net stress is a function of said first and second stresses. As such, the first stress can be configured to achieve a predetermined, desired net stress. For example, the first stress can be configured to cancel out the second stress such …

Nanocomposite Nickel Ceria Cermet With Low Nickel Content For Anode-Supported Sofcs, Piotr Z. Jasinski, Toshio Suzuki, Vladimir Petrovsky, Harlan U. Anderson

Materials Science and Engineering Faculty Research & Creative Works

Ni-ceria cermet's with 7.5, 11, and 14 vol % of Ni manufactured by a novel method, called net-shape technology, are presented and evaluated. the method is a combination of conventional ceramic sintering and a polymer precursor impregnation technique. Ceria powder with a carbon pore former is sintered, constructing a rigid and stable oxide skeleton, which is next backfilled with Ni polymer precursor. the electrical conductivity of the cermet's as a function of Ni content has been investigated. © 2005 the Electrochemical Society. All rights reserved.

Role Of Interface Bonding In Spin-Dependent Tunneling (Invited), Evgeny Y. Tsymbal, Kirill D. Belashchenko

Materials Research Science and Engineering Center: Faculty Publications

Measured positive values of the spin polarization of the tunneling current from 3d ferromagnetic metals are commonly explained by the dominant s-electron contribution based on symmetry considerations for bulk materials, ignoring the influence of the interfaces. In this work, three different models are considered which suggest that the spin polarization is primarily determined by the electronic and atomic structures of the ferromagnet/insulator interfaces rather than by the bulk properties. A simple tight-binding model demonstrates that the existence of interface states and their contribution to the tunneling current depend on the degree of hybridization between the orbitals on metal …

Synthesis And Solution Characterization Of Water-Soluble Polyacrylamide And Its Applications In Oil Industries, Ghuwaya Humaid Alnuaimi

Theses

No abstract provided.

The Wettability Of Titanium Diboride By Molten Aluminum Drops, D. A. Weirauch, W. J. Krafick, G. Ackart, P. D. Ownby

Materials Science and Engineering Faculty Research & Creative Works

Titanium diboride is widely accepted to be completely wet by liquid aluminum, yet few published wetting studies demonstrate this behavior, and reported contact angles vary widely. Sessile drop substrates from four different sources were selected and their microstructures and chemistries characterized. the results of sessile drop experiments using four techniques to modify oxide film behavior were compared. the Al-TiB2 interfaces were examined in metallographic sections or after chemical removal of the Al drop. Al wets a material containing 5.5 wt% Ni in vacuum experiments before the hold temperature of 1025°C is reached. the other TiB2 substrates are completely wet by …

Friction And Adhesion In Rigid Surface Indentation Of Nitrile Rubber, Stephen Jerrams

Articles

When a rigid body in the form of a plane strain indentor is forced into an elastomer, the asperities on the surface of the indentor are filled by the softer material. As depth of ingress increases, the rubber displaced into the indentor asperities exhibits stick-slip behaviour. The rubber adheres to the rigid body and if the depth of ingress is held at a maximum, the level of adhesion remains constant despite short-term load relaxation occurring in the rubber.

This text describes the influence of a range of factors on indentation forces and adhesion in rigid indentation of hydrogenated nitrile rubbers. …

A Symmetric Green Function For The Non-Collinear Magnetic Multilayer, Mikhail Ye Zhuravlev, John D. Burton, A. V. Vedyayev, Evgeny Y. Tsymbal

Materials Research Science and Engineering Center: Faculty Publications

Symmetry properties of the Green function in magnetic multilayers with noncollinear magnetization of the layers are investigated on the basis of the transfer matrix method. The Green function symmetric with respect to permutation of its arguments is constructed. It is shown how the boundary conditions can be imposed on this Green function.

We have proposed a constructive way to build a symmetric one-electron GF for the magnetic multilayer with magnetization in the plane of the layers. To build this GF we solved the following problems: finding the solution of the systems of differential equations of general form; matching the solutions …

High-Temperature Monitoring Of Refractory Wall Recession Using Frequency-Modulated Continuous-Wave (Fm-Cw) Radar Techniques, Bivin Varghese, C. Deconick, G. Cartee, M. Velez, Robert E. Moore, R. Zoughi

Electrical and Computer Engineering Faculty Research & Creative Works

Furnaces are among the most crucial components in the glass and metallurgical industry. Nowadays, furnaces are being operated at higher temperatures and for longer periods of time thus increasing the rate of wear on the furnace refractory lining. Consequently, there is a great need for a nondestructive tool that can accurately measure refractory wall thickness at high temperatures. In this paper the utility of a frequency-modulated continuous-wave (FM-CW) radar is investigated for this purpose.

Applying Particle Swarm Optimization To Dynamic Lot Sizing With Batch Ordering, Ahmad Hassan Sayed Aly

Archived Theses and Dissertations

No abstract provided.

Instrumentation Of Ysz Oxygen Sensor Calibration In Liquid Lead-Bismuth Eutectic, X. Wu, Jian Ma, Yingtao Jiang, B. Fu, W. Hang, J. Zhang, N. Li

Mechanical Engineering Faculty Research

Liquid lead-bismuth eutectic (LBE), a good candidate for the coolant in the subcritical transmutation blanket, is known to be very corrosive to the stainless steel that transports it. Such a corrosion problem can be prevented by producing and maintaining a protective oxide layer on the exposed surface of the stainless steel. Proper formation of the oxide layer critically depends on the accurate measurement and control of the oxygen concentration in liquid LBE. An oxygen sensor calibration/measurement apparatus has been designed and built to deliberately calibrate an yttria stabilized zirconia (YSZ) oxygen sensor. A detailed description of this system with its …

Nonlinear Model For Reinforced Concrete Under Cyclic Loading, Aly Said, M. Elmorsi, M. Nehdi

Civil and Environmental Engineering and Construction Faculty Research

Most of the available shear models for reinforced concrete rely on empirical formulations. In this study, a rational shear stress function is used to define the shear stress–strain envelope for reinforced concrete. Cyclic rules are proposed to define the loading, unloading and reloading relationships for reinforced concrete under shear stress reversals. A normal stress function describing the cyclic relationship of concrete under axial stress is also introduced. The proposed functions are verified using experimental data of reinforced concrete panels tested under monotonic and cyclic loading. Subsequently, the normal and shear stress functions along with their cyclic rules are integrated in …

Slip Behavior In Liquid Films On Surfaces Of Patterned Wettability: Comparison Between Continuum And Molecular Dynamics Simulations, Nikolai V. Priezjev, Anton A. Darhuber, Sandra M. Troian

Mechanical and Materials Engineering Faculty Publications

We investigate the behavior of the slip length in Newtonian liquids subject to planar shear bounded by substrates with mixed boundary conditions. The upper wall, consisting of a homogenous surface of finite or vanishing slip, moves at a constant speed parallel to a lower stationary wall, whose surface is patterned with an array of stripes representing alternating regions of no shear and finite or no slip. Velocity fields and effective slip lengths are computed both from molecular dynamics (MD) simulations and solution of the Stokes equation for flow configurations either parallel or perpendicular to the stripes. Excellent agreement between the …

Use Of Positron Annihilation Spectroscopy For Stress-Strain Measurements: Quarterly Progress Report (December 01, 2004 – February 28, 2005), Ajit K. Roy

Transmutation Sciences Materials (TRP)

The purpose of this collaborative research project involving the University of Nevada Las Vegas (UNLV), the Idaho State University (ISU), and the Los Alamos National Laboratory (LANL) is to evaluate the feasibility of determining residual stresses in cold-worked, plastically-deformed (bent), and welded materials using a nondestructive method based on positron annihilation spectroscopy (PAS). This technique uses γ-rays from a small MeV electron Linac to generate positrons inside the sample via pair production. This method is known to have capabilities of characterizing defects in thick specimens that could not be accomplished by conventional positron technique or other nondestructive methods. The data …