Materials Science and Engineering Commons^™

Preparation, Characterization And Photoelectrochemical Activities Of Cu-Tio2/Ito Films, Dong Shu, Chun He, Han-Xia Zhang, Ya Xiong

Journal of Electrochemistry

Cu-TiO₂/ITO films were prepared by direct photo-reduction deposition of Cu²⁺ on TiO₂/ITO films. The nanocomposite films were characterized by UV-vis diffuse reflectance spectra (DRS), XRD spectra, Scanning Electron Microscope (SEM) technology, and photovoltage measurement. The feasibility of improving the photocatalytic activity of TiO₂ film by combining the modification of Cu nanoparticles with the application of anodic bias was investigated. The experimental results showed that the deposited Cu has an apparent enhancement effect with respect to suppressing the recombination between the photogenerated charge carriers and enhancing the photocatalytic oxidation of formic acid. The combination could …

Structures And Redox Activities Of Poly(M-Methoxyaniline), Yun-You He, Yi-Ting Xu, Li-Zong Dai, Jean-Yves Gal, Hui-Huang Wu

Journal of Electrochemistry

Poly(m-methoxyaniline), PmMAn, was prepared in the presence of HCl, p-toluene-sulfonic acid and perchloric acid. By using cyclic voltammetry, the effect of different acid dopant on electrochemical activities of PmMAn was studied. The results showed that perchloric acid is the best acid to prepare PmMAn with good electrochemical activities The FTIR spectra indicate that the acid radical anions have embedded into PmMAn molecularchain as counter-ion during synthetic process, and this great influences the redox activities of PmMAn. SEM and XRD measurements illustrate that PmMAn is characterized by its typical molecular crystalline being monoclinic.

Investigation Of Adsorption And Oxidation Behavior Of Isosafrole On A Smooth Pt, Xiao-Hong Zhang, Xiao-Jing Su, Qi-Ling Zhong, Lei Zhang, De-Sheng Mei, Bin Ren, Zhong-Qun Tian

Journal of Electrochemistry

The electro-oxidation of isosafrole on a smooth platinum electrode was investigated in the non-aqueous solution. The CV curve shows two oxidation peaks and one reduction peak in the potential region between -0.5 V and 1.95 V. The relation between the oxidation and reduction peaks has been determined also by CV. The adsorption behavior of isosafrole on Pt was also investigated.

Study On Reduction Process Of Electrolyic Manganese Dioxide In Situ By Ultraviolet-Visible Absorption Spectroscopy, Li-Cai Zhu, Zhong-Zhi Yuan, Wei-Shan Li

Journal of Electrochemistry

The concentrationsof soluble Mn(Ⅲ) species, during the reduction ofelectrolytic MnO₂ (EMD) in alkaline solution,have been monitored in situ by UV-visible spectroscopy. The concentration of Mn(Ⅲ) ion in solution changes with discharge time. The first electron discharge process of EMD can be described by three different steps: 1) the reduction of Mn⁴⁺ ions on the surface of EMD particles and the structural defect regions within the EMD, 2) the reduction of Mn⁴⁺ ions in ramsdellite, 3)the reduction of Mn⁴⁺ ions in pyrolusite. During the second electron discharge of EMD, the soluble Mn(Ⅲ) is reduced to Mn(Ⅱ) , …

Study On Electrochemical Performance Of Electroless Cobalt Coating For Microencapsution Of Hydrogen Storage Alloys, Tong-Chi Xia, Sheng-Li Zhang, Shu-Xin Wang, Kun Huang, Wen-Zeng Tian

Journal of Electrochemistry

The chemical cobalt plating method is used to treat on the hydrogen storage alloys. Effect of the surface treatment on the electrochemical performance of MH eletrodes was investigated by carrying out experimental methods of CV, AC and charge/discharge cycle tests. The results showed that after microencapsulation with cobalt, the impedance of electrochemical reaction on the surface and polarization during chare/discharge process was markedly decreased; and the electrocatalytic activity on the surface, discharge capacity, charge efficiency was improved. It was also indicated that the anode reaction of MH electrode treated was controlled by diffusion process.

Investigation Of Subcritical Fatigue Crack Growth In Gamma Titanium Aluminides, Blair London

Materials Engineering

Our titanium aluminide alloy was readily heat treated to a fully lamellar state by holding at 1345C for 1.5 hours and furnace cooling resulting in a grain size of 330 muon m. The yield stress, ultimate stress, and total elongation were 315MPa, 465MPa, and 0.46% respectively. The fully lamellar microstructure shows significant work hardening. No long cracks initiated at R=0.1 and variation max=300MPa with up to 1.4 million cycles.

Effect Of Interface Bonding On Spin-Dependent Tunneling From The Oxidized Co Surface, Kirill D. Belashchenko, Evgeny Y. Tsymbal, Mark Van Schilfgaarde, Derek A. Stewart, Ivan I. Oleynik, Sitaram Jaswal

Materials Research Science and Engineering Center: Faculty Publications

We demonstrate that the factorization of the tunneling transmission into the product of two surface transmission functions and a vacuum decay factor allows one to generalize Jullière's formula and explain the meaning of the "tunneling density of states" in some limiting cases. Using this factorization we calculate spin-dependent tunneling from clean and oxidized fcc Co surfaces through vacuum into Al using the principal-layer Green's-function approach. We demonstrate that a monolayer of oxygen on the Co(111) surface creates a spin-filter effect due to the Co-O bonding which produces an additional tunneling barrier in the minority-spin channel. This changes the minority-spin dominated …

Development Of Nanostructure Based Corrosion-Barrier Coatings On Steel For Transmutation Applications, Biswajit Das

Transmutation Sciences Materials (TRP)

The objective of this project is to develop a novel nanostructure based coating technology that will provide significantly improved corrosion resistance for steel in LBE at elevated temperatures (500 - 600^oC), as well as provide long-term reliability under thermal cycling. The nanostructure based coatings will consist of a layer of nanoporous alumina with the pores filled with an oxidizing metal such as Cr, followed by a capping layer of alumina. Alumina, which is a robust anti-corrosion material, provides corrosion resistance at elevated temperatures. The Cr serves two purposes: (1) it acts as a solid filler material for the …

Effect Of Silicon Content On The Corrosion Resistance And Radiation-Induced Embrittlement Of Materials For Advanced Heavy Liquid Metal Nuclear Systems, Ajit K. Roy

Transmutation Sciences Materials (TRP)

The purpose of this collaborative research project involving the University of Nevada Las Vegas (UNLV), Los Alamos National Laboratory (LANL) and Idaho State University (ISU) is to evaluate the effect of silicon (Si) content on the corrosion behavior and radiation-induced embrittlement of martensitic stainless steels having chemical compositions similar to that of the modified 9Cr-1Mo 2 steel. Recent studies at LANL involving Alloy EP-823 of different Si content have demonstrated that increased Si content in this alloy may enhance the corrosion resistance in molten lead-bismuth-eutectic (LBE). Since very little data exists in the open literature on the beneficial effect of …

A Comparison Between Growth Morphology Of "Eutectic" Cells/Dendrites And Single-Phase Cells/Dendrites, Surendra N. Tewari, S. V. Raj, L. E. Locci

Chemical & Biomedical Engineering Faculty Publications

Directionally solidified (DS) intermetallic and ceramicbased eutectic alloys with an in-situ composite microstructure microstructure containing finely distributed, long aspect ratio, fiber, or plate reinforcements are being seriously examined for several advanced aero-propulsion applications. In designing these alloys, additional solutes need to be added to the base eutectic composition in order to improve their high temperature strength, and provide for adequate toughness and resistance to environmental degradation. Solute addition, however, promotes instability at the planar liquid-solid interface resulting in the formation of two-phase eutectic “colonies.”[1–4] Because morphology of eutectic colonies is very similar to the single-phase cells and dendrites, the stability …

Processing And Optimization Of Natural Fiber Reinforced Composites Using Date Palm Fibers, Khalifa Musabbeh Suwaidan Hamad Al-Kaabi

Theses

During the last twenty years, ecological concerns have resulted in a renewed interest in natural materials. Composite materials usually depend on using man-made fibers as the reinforcing element. The possibility of using natural fibers instead of synthetic fibers is gaining acceptance among users. This work aims to investigate the possibility of extracting natural fibers from date palm trees to be used as reinforcement with polymeric materials. The objective was achieved by characterizing fibers through different chemical, physical and mechanical tests and using different treatment methods in order to modify the fiber properties. Date Palm Fibers (DPF) exhibit a cylindrical shape …

Synthesis And Characterization Of Polyaniline And Poly (3-Methylthiophene) As Conducting Polymers, Fatma Khalifa Obaid Dalmouk

Theses

The performance of materials in general depends on their properties. There is a continuous need of new materials to meet the technological revolution that was witnessed by the end of last century. In this work, a new class of materials was synthesized. The host matrix is an Organic Conducting Polymer (OCP) of either poly(3-methylthiophene) (PMT) or poly(aniline) (PAN). The synthesis of OCP is achieved using electrochemical methods of applying constant potential or cyclic voltammetry at a platinum or graphite substrate in an acetonitrile containing tetra-alkyl-ammonium salt. The set up is three-electrode system of a platinum counter electrode and a silver/silver …

Bulk Polymerization And Structure-Property Relationship Of Medical Grade Polyurethane, Mariam Nasser Al-Saedi

Theses

Polyurethanes as biomaterials have been used in the augmentation and repair of the human body with great success. The choice of material for a particular application often hinges on the body's response to the polymer, the mechanical and thermal properties of the polymer and the stoichiometric ratio of active ingredients used in the synthesis.

A large number of polyurethanes used in medical applications are polyester-based and cannot be used in long-term implant applications because they are very susceptible to hydrolysis. Other medical-grade polyurethanes, which are suitable for implants are polyether-based which might to some extent, suffer from environmental stress cracking …

Modeling, Optimization, And Flow Visualization Of Chemical Etching Process In Niobium Cavities, Sathish K. Subramanian

UNLV Theses, Dissertations, Professional Papers, and Capstones

Niobium cavities are important component of the linear accelerators. Researchers have concluded that buffered chemical polishing on the inner surface of the cavity improves its performance. However the mechanism of chemical polishing is not well understood. A finite element computational fluid dynamics (CFD) model was developed to simulate the fluid flow characteristics of chemical etching process inside the cavity. The CFD model is then used to optimize the baffle design. The analysis confirmed the observation of other researchers that the iris section of the cavity received more etching than the equator regions. The baffle, which directs flow towards the walls …

Theoretical Modeling Of Protective Oxide Layer Growth In Non-Isothermal Lead-Alloys Coolant Systems, Yitung Chen, Jinsuo Zhang, Jichun Li

Transmutation Sciences Materials (TRP)

The goal of the proposed research project is to provide basic understanding of the protective oxide layer behaviors and to develop oxide layer growth models of steels in non-isothermal leadalloys (lead or lead-bismuth eutectic) coolant systems. It is widely recognized that the corrosiveness of the lead-alloys is a critical obstacle and challenge for which it can be safely used or applied in the nuclear coolant systems. Active oxygen control technique can promote the formation of the “self-healing” oxide films on the structural material surface, drastically reducing steel corrosion and coolant contamination. Many experiments of steels exposed to flowing leadalloys have …

Use Of Positron Annihilation Spectroscopy For Stress-Strain Measurements, Ajit K. Roy

Transmutation Sciences Materials (TRP)

The purpose of this collaborative research project involving the University of Nevada Las Vegas (UNLV) and Idaho State University (ISU) is to evaluate the feasibility of determining residual stresses of welded, bent (three-point-bend), and cold-worked engineering materials using a new nondestructive technique based on positron annihilation spectroscopy (PAS). The proposed technique is to use γ-rays from a small MeV electron linear accelerator (Linac) to generate positrons inside the test sample via 2 pair production. This method can be used for materials characterization and investigation of defects in thick samples that usually cannot be accomplished by conventional positron technique or other …

Corrosion Research On Rock Bolts And Steel Sets For Sub-Surface Reinforcement Of The Yucca Mountain Repository, Dhanesh Chandra, Jaak J.K. Daemen, Amy J. Smiecinski

Publications (YM)

Corrosion resistance of Yucca Mountain (YM) carbon steel rock bolt (0.44%C) and I-beam steel sets (0.08%C) towards electrochemical/general corrosion, stress corrosion cracking (SCC), and hydrogen embrittlement (HE) susceptibility has been determined using simulated YM waters in this Task 18 for YM site underground repository tunnel support. These findings show the corrosion behavior of these structural support members with and without applied stresses in simulated YM environments. The simulated YM waters were increased in nominal concentrations from Ix to lOOx (three different levels) for electrochemical and other corrosion studies. The effect of temperature, of significance to YM repository, on the corrosion …

Polarized Neutron Measurement Of Magnetic Order In Yba2⁢Cu3⁢O6.45, Herbert A. Mook, Pengcheng Dai, Stephen M. Hayden, Arno Hiess, Sh Lee, Fatih Dogan

Materials Science and Engineering Faculty Research & Creative Works

Orbital current order of the d-density-wave type has been postulated to explain the pseudo gap in high temperature superconductors. We have performed neutron scattering experiments to search for this order and show here the results obtained on an YBa_2⁢Cu₃⁢O_6.45 sample using the best neutron spectrometers available. We argue that the data are consistent with a small, largely c-axis-directed moment, found below about 200 K.

Anisotropy Of Exchange Stiffness And Its Effect On The Properties Of Magnets, K. D. Belashchenko

Kirill Belashchenko Publications

Using the spin-spiral formulation of the tight-binding linear muffin-tin orbital method, the principal components of the exchange stiffness tensor are calculated for typical hard magnets including tetragonal CoPt-type and hexagonal YCo₅ alloys. The exchange stiffness is strongly anisotropic in all studied alloys. This anisotropy makes the domain wall surface tension anisotropic. Competition between this anisotropic surface tension and magnetostatic energy controls the formation and dynamics of nanoscale domain structures in hard magnets. Anisotropic domain wall bending is described in detail from the general point of view and with application to cellular Sm–Co magnets. It is shown that the repulsive …

Teaching Corporate Culture: An Engineer's Survival Guide, Richard N. Savage

Materials Engineering

The transition from new engineering graduate to successful member of corporate America is a difficult journey. Often the skills required are not part of a student’s traditional undergraduate education. At Cal Poly, we have integrated a new course into our existing Senior Project curriculum which enables students to develop the professional skills necessary to become an effective member of any corporation. Key skills such as communication, problem solving and project management are practiced through active learning techniques. These as well as other topics studied are required for ABET certification. The new course investigates the mission and values that are at …

Studies On Yba2nbo6 And Yba2cu3-Xnbxoy Buffer Layers, S. Sathiraju, R. Wheeler, Paul N. Barnes, T. L. Peterson, Iman Maartense, A. L. Campbell, N. A. Yust, T. J. Haugan, Q. Jia, Paul Arendt, Sharmila M. Mukhopadhyay, S. Vemulakonda

Mechanical and Materials Engineering Faculty Publications

No abstract provided.

Superplasticity In Cast A356 Induced Via Friction Stir Processing, Z. Y. Ma, Rajiv S. Mishra, M. W. Mahoney

Materials Science and Engineering Faculty Research & Creative Works

Super plasticity was investigated in friction stir processed A356 alloy at temperatures of 470-570 °C and initial strain rates of 3x10 -4-1x10-1 s-1. Maximum superplastic elongation of 650% was obtained at 530 °C and an initial strain rate of 1x10-3 s-1 where a maximum strain rate sensitivity of 0.45 was observed. © 2004 Acta Materialia Inc. Published by Elsevier Ltd. All rights reserved.

Analysis Of Kancil's Car Knuckle Prototype, Tresna P. Soemardi, Aida Mahmudah

Makara Journal of Technology

Analysis of Kancil’s Knuckle Prototype. The objective of this work is to execute strength analysis of knuckle, which is made from FCD 50, by using static analysis on maximum loading. This maximum loading is obtained from front axle loading calculation on particular operating condition. That is, vehicle is braking while cornering in down hill. From previous vehicle loading calculation, we get a number of loading values on different speed and deceleration. At the end, we get a value of speed and deceleration that guarantee the vehicle safety if it is braking while cornering in down hill. As comparison, loading calculation …

Pid Fuzzy Logic Controller System For Dc Motor Speed Control, H. Samsul Bachri M.

Makara Journal of Technology

PID Fuzzy Logic Controller System for DC Motor Speed Control. A good controller system must have resilience to disturbance and must be able to response quickly and accurately. Problem usually appears when PID controller system was built sensitively hence the system’s respon to the disturbance will yield big overshot/undershot then the possibility of oscillation to be happened is excelsior. When the controller system was built insensitively, the overshot/undershot will be small but the recovery time will be longer. Hybrid controller system could overcome those problems by combining PID control system with fuzzy logic. The main control of this system is …

Quarternair Cugasete And Cuga0.5in 0.5te2 Thin Films Fabrication Using Flash Evaporation, A. Harsono Soepardjo

Makara Journal of Technology

Quarternair CuGaSeTe and CuGa0.5In 0.5Te2 Thin Films Fabrication Using Flash Evaporation. Quarternair materials CuGaSeTe and CuGa0.5In 0.5Te2 are the basic materials to solar cell fabrication. These materials have high absorption coefficients around 103 – 105 cm-1 and band gap energy in the range of 1-5 eV. In this research, the films were made by flash evaporation method using quarternair powder materials of CuGaSeTe and CuGa0.5In 0.5Te2 to adhere in a glass substrate. After the films were obtained, the properties of these films will be characterized optically and electrically. The lattice parameter of the films and the crystalline film structure were …

Graded Channel Mosfet Simulation With S-Pisces 2b, Hartono Siswono

Makara Journal of Technology

Graded Channel MOSFET simulation with S-Pisces 2B. Graded-Channel Metal-Oxide-Semiconductor Field-effect- Transistor or GCMOSFET is being discussed in this paper. GCMOSFET technology has been developed to meet the growing demand for low power and high performance application. In this paper, it will be shown that, compared to ungraded MOSFET, the GCMOSFET device offers the advantage of significantly higher drive current. The higher drive current is achieved because the effecctive channel length of GCMOSFET is shorter than the ungraded MOSFET’s. From the simulation result with S-PISCES 2B and MATLAB, it can been shown that the ID from GCMOSFET is higher than the …

Construction Of Depth-Structure Shelf-Edge Map For Case Study Of Kujung Formation, East Java Sea, Saifatur Rusli, Suparto Suparto

Makara Journal of Technology

Construction of Depth-Structure Shelf-edge Map for Case Study of Kujung Formation, East Java Sea. In general, reflection seismic method has capability to represent sub-surface in time domain. Seismic cross-section that depicts the formation of sub-surface usually use time domain in the format of TWT (Two Way Times). This due to in the process of seismic data acquisition, seismic wave propagates in down-going and up-going manner so that the obtained results from data processing are in the format of TWT seismic vs. shot points. This paper will describe the construction of depth-structure map for case study of Kujung Formation, East Java …

High Temperature Heat Exchanger Project: Quarterly Progress Report January 1, 2004 Through March 31, 2004, University Of Nevada, Las Vegas. Research Foundation, Robert F. D. Perret

Publications (NSTD)

Mutually satisfactory language has been developed to permit signing of a subcontract between the General Atomics Corporation and the UNLV Research Foundation. The contract is signed.

Metal Superplasticity Enhancement And Forming Process, Rajiv S. Mishra, Murray W. Mahoney

Materials Science and Engineering Faculty Research & Creative Works

A shaped metallic component is formed by friction stirring at least a segment of a single piece of bulk metal to impart superplasticity thereto and thereby yield a single superplastic metal blank from the single piece of bulk metal. The metal blank is then deformed by a metal deformation process such as forging, rolling, drawing, bending, extruding, gas forming, punching, and stamping.

Modeling, Fabrication, And Optimization Of Niobium Cavities: Phase Iii Third Quarterly Report, Robert A. Schill Jr., Mohamed Trabia

Transmutation Sciences Materials (TRP)

Niobium cavities are important parts of the integrated NC/SC high-power linacs. Over the years, researchers in several countries have tested various cavity shapes. They concluded that elliptically shaped cells are the most appropriate shape for superconducting cavities. The need for very clean surfaces lead to the use of a buffered chemical polishing produce for surface cleaning to get good performance of the cavities. The third phase concludes the experimental a fluid flow study and optimization study. The first quarter and second quarter of phase three also begins the experimental set-up of secondary emission studies from niobium in superconducting mode. This …