Materials Science and Engineering Commons^™

The Undergraduate Engineering Mental Health Help-Seeking Instrument (Ue-Mh-Hsi): Development And Validity Evidence, Joseph H. Hammer, Courtney J. Wright, Melanie E. Miller, Sarah A. Wilson

Chemical and Materials Engineering Faculty Publications

Background: Undergraduate engineering students experiencing distress are less likely than peers to ask for professional help. A population-specific instrument to facilitate the identification of factors that influence mental healthcare utilization could guide development and testing of interventions to increase help seeking.

Purpose: We used mixed methods guided by the Integrated Behavioral Model (IBM) to develop and evaluate the Undergraduate Engineering Mental Health Help-Seeking Instrument (UE-MH-HSI).

Method: First, we adapted existing measures of mental health help-seeking intention and mechanisms (i.e., attitudes, perceived norm: injunctive, perceived norm: descriptive, personal agency: autonomy, personal agency: capacity). Second, we coded qualitative interviews (N = 33) …

Analysis Of The Thermal Aging Kinetics Of Tallow, Chicken Oil, Lard, And Sheep Oil, Yun-Chuan Hsieh, Hao Ouyang, Yulin Zhang, Donyau Chiang, Fuqian Yang, Hsin-Lung Chen, Sanboh Lee

Chemical and Materials Engineering Faculty Publications

Understanding the thermal aging kinetics of animal oils is of vital importance in the storage and applications of animal oils. In this work, we use four different techniques, including UV-Vis spectrometry, viscometry, impedance spectroscopy, and acid–base titration, to study the thermal aging kinetics of tallow, chicken oil, lard, and sheep oil in the temperature range from 120 ◦C to 180 ◦C. The evolutions of the UV-Vis absorbance, dynamic viscosity, electric impedance, and acid titration are discussed with the defect kinetics. The evolutions of the color centers, defects for dynamic viscosity, and electric dipoles follow second-order, first-order, and zero-order kinetics, respectively. …

Growth And Faceting Of Tungsten And Oxides In Scandate Cathode Particles During In Situ Heating In The Scanning Electron Microscope, Huanhuan Bai, Thomas John Balk

Chemical and Materials Engineering Faculty Publications

Tungsten-based scandate dispenser cathodes are promising next-generation thermionic electron sources for vacuum electron devices, due to their excellent emission performance at tempera- tures lower than those required for conventional cathodes. There has been a significant recent effort to understand scandate cathode performance and to characterize the tungsten and other materials on the emitting surface, primarily via the study of cathodes before and after emission testing. Moreover, these scandate cathodes have typically been characterized at room temperature only. In situ obser- vations of scandate cathodes is challenging, as these devices are thermionic emitters that operate in a high-vacuum environment, and because …

Effects Of External Pressure On Cycling Performance Of Silicon-Based Lithium-Ion Battery: Modelling And Experimental Validation, Kai Zhang, Yinan He, Junwu Zhou, Xinyang Wang, Yong Li, Fuqian Yang

Chemical and Materials Engineering Faculty Publications

Controlling the stress state of electrodes during electrochemical cycling can have a positive effect on the cycling performance of lithium-ion battery. In this work, we study the cycling performance of silicon-based lithium-ion half cells under the action of pressure in a range of 0.1 to 0.4 MPa. The cycling performance of the silicon-based lithium-ion half cells increases first with increasing the pressure to 0.2 MPa and then decreases with further increasing the pressure. The analysis of the surface morphologies of cycled electrodes reveals that applying a pressure of 0.2 MPa leads to the formation of fine electrode surface with the …

Enhancing Thermal Stability Of Perovskite Solar Cells Through Thermal Transition And Thin Film Crystallization Engineering Of Polymeric Hole Transport Layers, Sanggyun Kim, Sina Sabury, Carlo A. R. Perini, Tareq Hossain, Augustine O. Yusuf, Xiangyu Xiao, Ruipeng Li, Kenneth R. Graham, John R. Reynolds, Juan-Pablo Correa-Baena

Chemical and Materials Engineering Faculty Publications

Organic hole transport layers (HTLs) have been known to be susceptible to thermal stress, leading to poor long- term stability in perovskite solar cells (PSCs). We synthesized three 2,5-dialkoxy-substituted, 1,4-bis(2-thienyl)phenylene (TPT)-based conjugated polymers (CPs) linked with thiophene-based (thiophene (T) and thienothiophene (TT)) comonomers and evaluated them as HTLs in n-i-p PSCs. TPT-T (MB/C6), which has branched 2- methylbutyl and linear hexyl (MB/C6) side chains, emerged as a promising HTL candidate, enabling power conversion efficiencies (PCEs) greater than 15%. In addition, PSCs with this HTL showed an improvement in long-term stability at elevated temperatures of 65 °C when compared to those …

Resolving The Size And Charge Of Small Particles: A Predictive Model Of Nanopore Mechanics, Samuel Bearden, Tigran M. Abramyan, Dmitry Gil, Jessica Johnson, Anton Murashko, Sergei Makaev, David Mai, Alexander Baranchikov, Vladimir Ivanov, Vladimir Reukov, Guigen Zhang

Chemical and Materials Engineering Faculty Publications

The movement of small particles and molecules through nanopore membranes is widespread and has far-reaching implications. Consequently, the development of mathematical models is essential for understanding these processes on a micro level, leading to deeper insights. In this endeavor, we suggested a model based on a set of empirical equations to predict the transport of substances through a solid-state nanopore and the associated signals generated during their translocation. This model establishes analytical relationships between the ionic current and electrical double-layer potential observed during analyte translocation and their size, charge, and mobility in an electrolyte solution. This framework allows for rapid …

Pulsing-Induced Healing Of A Surface Crack Of A Nickel-Based Alloy, Liwei Wang, Mingming Quan, Zhen Tan, Ming Liu, Dianlong Wang, Xiao Yang, Ying Liu, Yaning Mao, Zhimin Liang, Fuqian Yang

Chemical and Materials Engineering Faculty Publications

In this work, we demonstrate the feasibility of applying electric pulses to heal surface cracks on nickel-based alloy GH4169 under compressive load. There exists an incubation time for the onset of the healing of a crack, which is associated with local temperature at the crack tip. The crack size decreases with increasing the pulsing time at a constant healing rate prior to complete healing of the crack. Increasing compressive load accelerates the healing process. The electric pulsing leads to the formation of an influential zone surrounding the crack with the finest grain sizes in the healed crack and the coarsest …

Dual Light Emission Of Cssni3-Based Powders Synthesized Via A Mechanochemical Process, Xuan Huang, Xiaobing Tang, Xiyu Wen, Yuebin Charles Lu, Fuqian Yang

Chemical and Materials Engineering Faculty Publications

Lead toxicity has hindered the wide applications of lead halide perovskites in optoelec- tronics and bioimaging. A significant amount of effort has been made to synthesize lead-free halide perovskites as alternatives to lead halide perovskites. In this work, we demonstrate the feasibility of synthesizing CsSnI3-based powders mechanochemically with dual light emissions under ambi- ent conditions from CsI and SnI2 powders. The formed CsSnI3-based powders are divided into CsSnI3-dominated powders and CsSnI3-contained powders. Under the excitation of ultraviolet light of 365 nm in wavelength, the CsSnI3-dominated powders emit green light with a wavelength centered at 540 nm, and the CsSnI3-contained powders …

Assessing Global Engagement Interventions To Advance Global Engineering Competence For Engineering Formation, Scott Schneider, Erick S. Vasquez-Guardado, Corinne Mowrey, Michael Moulton, Homero Murzi, Matthew A. Witenstein

Chemical and Materials Engineering Faculty Publications

This paper summarizes the work performed during the first year of a collaborative Research Initiation in Engineering Formation (RIEF) project focused on assessing the formation of a global learner mindset in engineering students through the use of different types of global engagement interventions without extended international travel. During this year the global engagement interventions have been developed, piloted, and assessed using the Global Engagement Survey (GES) and Global Engineering Competency Scale (GECS) instruments in a pre and post format. The assessment results helped the research team update the interventions and refine the assessment strategy, including the addition of new qualitative …

Work In Progress: Exploring The Impact Of International Experiences On The Development Of Students’ Entrepreneurial Mindset, Olgha Bassam Qaqish, Marcia Poole, William Pennock, Erick S. Vasquez-Guardado, Fahmidah Ummul Ashraf

Chemical and Materials Engineering Faculty Publications

International experiences, including collaborative online international learning (COIL) experiences that naturally increase accessibility, are of interest to many undergraduate students. These experiences provide educators a unique opportunity to develop a student's entrepreneurial mindset (EM). Additionally, hands-on experiences aligned with the National Academy of Engineering’s (NAE) grand challenge themes (Sustainability, Security, Health, and Joy of Living) support connections between the experience, disciplinary knowledge, multicultural awareness, and EM. Through this Work-in-Progress (WiP) study, we seek to answer: 1) How do international experiences influence undergraduate science and engineering students’ EM, and 2) How does the international experience modality (i.e., study abroad or COIL) …

Enhancing Entrepreneurial Minded Learning Of Process Control And Heat Transfer Concepts Using Micromoments And Concept Maps, Erick S. Vasquez-Guardado, Ricardo Gomez Gonzalez, Jean M. Andino, Nilza D. Aples, Xiaojing Yuan

Chemical and Materials Engineering Faculty Publications

The Entrepreneurially Minded Learning (EML) Framework seeks to infuse an Entrepreneurial Mindset in engineering students. The EML framework is founded on the 3 C’s principles of curiosity, connections, and creating value. Assessing EML efforts, however, is a well-known challenge for many engineering courses that do not have a design component. Through concept maps and micromoment activities, this work seeks to answer the following questions: Does implementing micromoment activities enhance students’ EML in two core areas of chemical engineering, i.e., heat transfer and process controls? A secondary research question is whether introducing a physical device in lectures enhances students’ EML. The …

Using Micromoments And Concept Maps To Enhance Entrepreneurially Minded Learning Of Indoor Air Pollution Control, Jean M. Andino, Erick Salvador Vasquez-Guardado, Ricardo Gomez Gonzalez, Xiaojing Yuan, Nilza D. Aples

Chemical and Materials Engineering Faculty Publications

Micromoments targeted toward indoor air quality were introduced to students in an Air Quality Engineering course to enhance their entrepreneurial mindset. Three micromoment activities, i.e., “Question Frenzy”, “Make It Relevant”, and “How Do We Make It Better?” that are linked, respectively, to the curiosity, connections, and creating value elements of EM were deployed in the class in the context of the use of a Corsi Rosenthal cube (a do-it-yourself structure that has recently become popular as an inexpensive way to reduce indoor particle pollution). Students generated concept maps pre-and post- micromoment intervention using the freely available CMap Tools software. The …

Effects Of Ferrite And Graphite Phases On Scratch Characteristics Of Nodular Cast Iron, Zhitong Xu, Ming Liu, Chenghui Gao, Fuqian Yang

Chemical and Materials Engineering Faculty Publications

In this work, we conduct micro-scratch tests of nodular cast iron with Vickers indenter under constant normal load and investigate the effects of individual phases (i.e., ferrite and graphite phases) on the scratch charac- teristics of nodular cast iron. Using a bimodal Gaussian model to fit the experimental data of penetration depth, residual depth, elastic recovery rate, and scratch hardness, we calculate the contribution percentages of indi- vidual phases to scratch variables. The scratch variables are independent of the scratch speed used in this work, while the penetration depth increases linearly with increasing the normal load. There exists a large …

A Mechanical Model For Stress Relaxation Of Polylactic Acid/Thermoplastic Polyurethane Blends, Yi-Sheng Jhao, Hao Ouyang, Chien-Chao Huang, Fuqian Yang, Sanboh Lee

Chemical and Materials Engineering Faculty Publications

Polylactic acid (PLA) is considered a promising biodegradable polymer alternative. Due to its high brittleness, composite materials made by melt blending thermoplastic polyurethane (TPU) with PLA can enhance the toughness of PLA. To understand the forced aging caused by stress relaxation in polymer materials, this study explains the stress relaxation experiments of PLA/TPU blends with different mass ratios under applied strain through mechanical model simulations. The Kelvin representation of the standard linear solid model (SLSM) is used to analyze the stress relaxation data of TPU/PLA blends, successfully explaining that the Young’s moduli (E1 and E2) of springs decrease with increasing …

Shorting At Long Duration: Impact Of Extended Discharge Capacity On Battery Solid Electrolytes, Ryan C. Hill, Amanda S. Peretti, Leo J. Small, Erik D. Spoerke, Yang-Tse Cheng

Chemical and Materials Engineering Faculty Publications

Long-duration energy storage (LDES) is critical to a stable, resilient, and decarbonized electric grid. While batteries are emerging as important LDES devices, extended, high-power discharges necessary for cost-competitive LDES present new materials challenges. Focusing on a new generation of low-temperature molten sodium batteries, we explore here unique phenomena related to long-duration discharge through a well-known solid electrolyte, NaSICON. Specifically, molten sodium symmetric cells at 110 ° C were cycled at 0.1 A cm−2 for 1–23 h discharges. Longer discharges led to unstable overpotentials, reduced resistances, and decreased electrolyte strength, caused by massive sodium penetration not observed in shorter duration discharges. …

Local Strain Quantification Of A Porous Carbon Fiber Network Material, Robert N Quammen, Paul F. Rottmann

Chemical and Materials Engineering Faculty Publications

While porous materials’ wide range of attractive functional properties have led to their development for a variety of applications, their intrinsically stochastic microstructures prevent straightforward approaches to predicting their mechanical behavior. This is attributed to the mechanisms that govern the macroscale behavior of these materials operating on multiple microstructure-specific length scales spanning several orders of magnitude. The goal of this work was to experimentally observe these operative deformation mechanisms to better improve the development of mechanism-informed models that more accurately predict the behavior of these materials. In this study compression tests were conducted on a porous carbon fiber network material. …

The Janssen Effect And The Chini Ordinary Differential Equation, Adam Rogers, George Dyck, Jitendra Paliwal, Kurt Hildebrand, Michael D. Montross, Aaron P. Turner

Chemical and Materials Engineering Faculty Publications

The Janssen effect describes the increase in pressure with depth in granular materials. However, the original Janssen formulation treats the density as constant. In this work, we examine parametric density models that depend on both pressure and moisture content and allow for temperature dependence to be easily included. We focus on physically-motivated empirical models that are built on power-law terms. These power-law terms correspond to thermodynamic equations of state, such as the ideal gas law, and polytropic processes. When coupled with the Janssen ordinary differential equation (ODE), these power-law models have the form of a Chini ODE. We study the …

Protocol For Modeling And Simulating Lithiation-Induced Stress In Largely Deformed Spherical Nanoparticles Using Comsol, Yong Li, Yungpeng Guo, Yunhao Wu, Yin Rao, Kai Zhang, Dashun Liu, Fuqian Yang

Chemical and Materials Engineering Faculty Publications

Here, we present a finite element method-based scheme for solving coupled par- tial differential equations (PDEs) for the analysis of lithiation-induced stress in largely deformed spherical nanoparticles via the PDE module in COMSOL. We describe steps for software installation and setting PDEs, initial/boundary condi- tions, and mesh parameters. We then detail procedures for dividing the mesh and analyzing lithium trapping during electrochemical cycling. This protocol can also be extended to analyze a wide range of problems involving diffusion-induced stress. For complete details on the use and execution of this protocol, please refer to Li et al.

Spontaneous Alignment Of Myotubes Through Myogenic Progenitor Cell Migration, Lauren E. Mehanna, Adrianna R. Osborne, Charlotte A. Peterson, Brad J. Berron

Chemical and Materials Engineering Faculty Publications

In large-volume muscle injuries, widespread damage to muscle fibers and the surrounding connective tissue prevents myogenic progenitor cells (MPCs) from initiating repair. There is a clinical need to rapidly fabricate large muscle tissue constructs for integration at the site of large volume muscle injuries. Most strategies for myotube alignment require microfabricated structures or prolonged orientation times. We utilize the MPC’s natural propensity to close gaps across an injury site to guide alignment on collagen I. When MPCs are exposed to an open boundary free of cells, they migrate unidirectionally into the cell-free region and align perpendicular to the original boundary …

Experimental Thermal Conductivity Studies Of Agar-Based Aqueous Suspensions With Lignin Magnetic Nanocomposites, Bishal Gautam, Saja M. Nabat Al-Ajrash, Mohammad Jahid Hasan, Abhishek Saini, Sarah J. Watzman, Esteban Ureña-Benavides, Erick S. Vasquez-Guardado

Chemical and Materials Engineering Faculty Publications

Nanoparticle additives increase the thermal conductivity of conventional heat transfer fluids at low concentrations, which leads to improved heat transfer fluids and processes. This study investigates lignin-coated magnetic nanocomposites (lignin@Fe₃O₄) as a novel bio-based magnetic nanoparticle additive to enhance the thermal conductivity of aqueous-based fluids. Kraft lignin was used to encapsulate the Fe₃O₄ nanoparticles to prevent agglomeration and oxidation of the magnetic nanoparticles. Lignin@Fe₃O₄ nanoparticles were prepared using a pH-driven co-precipitation method with a 3:1 lignin to magnetite ratio and characterized by X-ray diffraction, FT-IR, thermogravimetric analysis, and transmission electron …

Inhibited Surface Diffusion In Nanoporous Multi-Principal Element Alloy Thin Films Prepared By Vacuum Thermal Dealloying, Tibra Das Gupta, Thomas John Balk

Chemical and Materials Engineering Faculty Publications

Nanoporous structures with 3D interconnected networks are traditionally made by dealloy- ing a binary precursor. Certain approaches for fabricating these materials have been applied to refrac- tory multi-principal element alloys (RMPEAs), which can be suitable candidates for high-temperature applications. In this study, nanoporous refractory multi-principal element alloys (np-RMPEAs) were fabricated from magnesium-based thin films (VMoNbTaMg) that had been prepared by magnetron sputtering. Vacuum thermal dealloying (VTD), which involves sublimation of a higher vapor pres- sure element, is a novel technique for synthesizing nanoporous refractory elements that are prone to oxidation. When VMoNbTaMg was heated under vacuum, a nanoporous structure was …

The Roles Of Carbonaceous Wastes For Catalysis, Energy, And Environmental Remediation, Chi Huey Ng, Mohd Aizzan Mistoh, Siow Hwa Teo, Andrea Galassi, Hin Taufiq-Yap, Nancy Julius Siambun, Jurry Foo, Coswald Stephen Sipaut, Jeffrey Seay, Jidon Janaun

Chemical and Materials Engineering Faculty Publications

This article reviews recent studies about various generations of the carbon materials for their applications in energy and environmental remediation. The synthesis routes of the carbon materials including the condition parameters, interaction of precursors, dopants and carbon materials, as well as their physical/chemical properties are explicated first. Then, the application and mechanism of metal-free/metal-doped/non-metal-doped carbon materials are discussed in detail. Lastly, this review is ended with a summary and invigorating perspectives on the challenges and future directions at the forefront of the catalysis platform to take a step further for real application.

Investigating The Structure And Performance Of Electrodes Made By Dry And Wet Slurry Processes, Kubra Uzun, Bhamiti Sharma, Bradley R. Frieberg, Ming Wang, Jiazhi Hu, Anita Li, Xiaosong Huang, Yang-Tse Cheng

Chemical and Materials Engineering Faculty Publications

Performance, cost, and safety are vital factors in producing and handling lithium-ion batteries. Using a dry process reduces the cost and environmental impact of producing large-scale lithium-ion battery electrodes significantly as solvents are eliminated. Thus, in this study, solvent-free dry electrostatic spray deposition (ESD) and conventional slurry processes were compared to uncover the influence of the manufacturing process on thick LiNi 0.8Mn0.1Co 0.1O 2 (NMC 811) positive electrodes. More pressure during calendering was found necessary for the dry-made (dry) electrodes to have the same porosity, leading to more cracks within the NMC particles and better adhesion. At slower discharge rates, …

Development Of Synthetically Accessible Glycolated Polythiophenes For High-Performance Organic Electrochemical Transistors, Bowen Ding, Vianna N. Le, Hang Yu, Guanchen Wu, Adam V. Marsh, Edgar Gutiérrez-Fernández, Nicolás Ramos, Martina Rimmele, Jaime Martín, Jenny Nelson, Alexandra F. Paterson, Martin Heeney

Chemical and Materials Engineering Faculty Publications

Four glycolated polythiophene-based organic mixed ionic-electronic conductors (OMIECs), PE2gTT, PE2gT, PT2gTT, and PT2gT are prepared by atom-efficient direct arylation polymerization, avoiding the need for toxic organometallic pre- cursors. PE2gT, PT2gTT, and PT2gT are operable in p-type accumulation mode organic electrochemical transistors (OECTs), with PT2gT displaying the best device performance with a μC* product figure-of-merit of 290 F cm−1 V−1 s−1 . A record volumetric capacitance among p-type glycolated polythiophene OMIECs of 313 F cm−3 is observed for PE2gT, ascribed to the high proportion- ality of polar components in its materials design. The good OECT performance of PE2gT with μC* = …

The Integrated Behavioral Model Of Mental Health Help Seeking (Ibm-Hs): A Health Services Utilization Theory Of Planned Behavior For Accessing Care, Joseph H. Hammer, David L. Vogel, Patrick R. Grzanka, Nayeon Kim, Brian T. Keum, Claire Adams, Sarah A. Wilson

Chemical and Materials Engineering Faculty Publications

This article introduces the integrated behavioral model of mental health help seeking (IBM-HS), a theoretical model for understanding the constructs (e.g., systemic, predisposing, and enabling factors; mental health literacy; illness perceptions; perceived need; stigma; shame; perceived benefits, motivation) that influence people’s decision making around seeking professional mental health care and their ultimate access to formal treatment. The IBM-HS is a help-seeking-specific adaptation of the empirically supported integrated behavioral model and integrative model, which are themselves evolutions of the theory of planned behavior and theory of reasoned action. The IBM-HS posits that help-seeking determinants (e.g., structural forces; cultural influences; past help-seeking …

Solvent-Free Manufacturing Of Lithium-Ion Battery Electrodes Via Cold Plasma, Zhiming Liang, Tianyi Li, Holden Chi, Joseph Ziegelbauer, Kai Sun, Ming Wang, Wei Zhang, Tuo Liu, Yang-Tse Cheng, Zonghai Chen, Xiaohong Gayden, Chunmei Ban

Chemical and Materials Engineering Faculty Publications

Slurry casting has been used to fabricate lithium-ion battery electrodes for decades, which involves toxic and expensive organic solvents followed by high-cost vacuum drying and electrode calendering. This work presents a new manufacturing method using a nonthermal plasma to create inter- particle binding without using any polymeric binding materials, enabling solvent-free manufacturing electrodes with any electrochemistry of choice. The cold-plasma-coating technique enables fabricating electrodes with thickness (>200 lm), high mass loading (>30 mg cm^-2), high peel strength, and the ability to print lithium-ion batteries in an arbitrary geometry. This crosscutting, chemistry agnostic, platform technology would increase energy density, …

Calculation Of Elastic Constants Of Bulk Metallic Glasses From Indentation Tests, Zhitong Xu, Ming Liu, Fuqian Yang

Chemical and Materials Engineering Faculty Publications

One of the challenges in the applications of instrumented indentation is to simultaneously measure elastic modulus and Poisson’s ratio of homogeneous, isotropic materials. This work proposes empirical equations for simultaneous calculation of elastic modulus and Poisson’s ratio of bulk metallic glasses (BMGs) from the ratio of the short diagonal length to the long diagonal length and the area of the Knoop imprint. The parameters pre- sented in the empirical equations are determined first by Knoop microhardness tests of 24 BMGs, whose elastic moduli and Poisson’s ratios are measured by resonant ultrasound spectroscopy. These empirical equations are further validated by the …

“Zero” Porosity High Loading Nmc622 Positive Electrodes For Li-Ion Batteries, Haidar Y. Alolaywi, Kubra Uzun, Yang-Tse Cheng

Chemical and Materials Engineering Faculty Publications

LiNi0.6 Mn0.2Co0.2 O 2 (NMC622) is a widely used positive electrode material for lithium-ion batteries, including electric vehicles. In this work, we investigated the effects of porosity, ranging from “zero” to the typical 35%, on the electrochemical behavior of high- loading NMC622 electrodes. Although it is well known that the energy density of the electrode increases with increasing areal capacity and decreasing porosity, NMC-positive electrodes with exceedingly low porosity (e.g., near zero) and high loading (e.g., 4 mAh cm−2 ) have not been investigated. Here, we report an intriguing observation that the “zero porosity” NMC electrode can have higher capacity …

Molecular Control Of Triplet-Pair Spin Polarization And Its Optoelectronic Magnetic Resonance Probes, Obadiah G. Reid, Justin C. Johnson, Joel D. Eaves, Niels H. Damrauer, John E. Anthony

Chemical and Materials Engineering Faculty Publications

Preparing and manipulating pure magnetic states in molecular systems are the key initial requirements for harnessing the power of synthetic chemistry to drive practical quantum sensing and computing technologies. One route for achieving the requisite higher spin states in organic systems exploits the phenomenon of singlet fission, which produces pairs of triplet excited states from initially photoexcited singlets in molecular assemblies with multiple chromophores. The resulting spin states are characterized by total spin (quintet, triplet, or singlet) and its projection onto a specified molecular or magnetic field axis. These excited states are typically highly polarized but exhibit an impure spin …

Novel Castor Oil/Water/Ethanol Pickering Emulsions Stabilized By Magnetic Nanoparticles And Magnetically Controllable Demulsification, Mohammad J. Hasan, Peng Chen, Neithan Dominick, Erick S. Vasquez, Esteban E. Ureña-Benavides

Chemical and Materials Engineering Faculty Publications

A novel castor oil/water/ethanol Pickering emulsion, stabilized by magnetic nanoparticles (NPs), was developed to allow on-demand demulsification by an external magnetic field for the extraction of ethanol from aqueous solution using the castor oil. The emulsion was stabilized by Fe3O4-coated cellulose nanocrystals (CNC@Fe3O4) and lignin-coated Fe3O4 NPs (lignin@Fe3O4). The stability of the emulsions was investigated at various castor oil to ethanol-water ratios (50/50 and 70/30), various NP concentrations, and ethanol concentrations in the aqueous phase. The magnetically controlled demulsification ability of the emulsions was investigated by using a permanent magnet. The results showed that the 70/30 emulsions were more stable …