Materials Science and Engineering Commons^™

Bio-Binder—Innovative Asphalt Technology, Amir Tabakovic

Articles

The global road network spans 16.3 million km [1], of which 5 million km is in the EU. These road networks fulfil major economic and social goals by facilitating the movement of goods and people throughout the EU, and are therefore of the utmost importance to the economic and social life of the EU [2]. National governments invest heavily in their road networks, e.g., in 2014, EUR 53.33 billion was invested in the development and maintenance of the EU road network [3]. Each year, the world produces 1.6 trillion tonnes of asphalt [4], of which 218 million tonnes is produced …

A Novel Self-Healing System: Towards A Sustainable Porous Asphalt, Shi Xu, Xueyan Liu, Amir Tabakovic, Erik Schlangen

Articles

Self-healing asphalt, aimed to produce a sustainable asphalt pavement using green technology, has been studied in the past two decades. Technologies including encapsulated rejuvenator and induction heating have been proposed, demonstrated in the laboratory, and gradually evaluated in field application. This paper looks into the synergy effect of the above two technologies, where induction heating serves as the asphalt damage repair mechanism, requiring just 2 min heating time and encapsulated rejuvenator will replenish (rejuvenate) aged asphalt binder and reinstate bitumen’s healing ability. Moreover, the increased temperature from induction heating could in turn accelerate the diffusion process of rejuvenator into aged …

A Validation Study For A New Erosion Model To Predict Erosive Airfoil Defouling, Arthur Rudek, David Muckenhaupt, Thomas Zitzmann, Gerald Russ, Barry Duignan

Articles

A new defouling erosion model for Lagrangian particle tracking is used to predict defouling of amor-phous, heterogeneous coatings such as those typically found in aircraft compressors. The main problem description, the mathematical formulation and the underpinning experiment of the model are presented in a previous communication by the authors. In this work, the Ansys CFX implementation of the model is described and an experiment is presented for the validation of the model. Air flows laden with a number of dry-ice particles are observed in an optically accessible stream channel containing a flat plate target. The defouling process of these particles …

Fabrication Of Dielectric Elastomers With Improved Electromechanical Properties Using Silicone Rubber And Walnut Polyphenols Modified Dielectric Particles, Liang Jiang, Yuhao Wang, Shipeng Wen, Yanfen Zhou, Qingdao University, Stephen Jerrams

Articles

In this work, polyphenolic extract from walnut green husks (denoted as walnut polyphenols), which is an abun-dant agroindustrial residue/waste, was used to modify barium titanate (BT) particles in the preparation of sili-cone rubber (SR) based dielectric elastomer (DE) composites with enhanced electromechanical performance.By employing walnut polyphenols modification, the dispersibility of BT particles in the SR matrix and the com-patibility between BT and SR were greatly improved, which resulted in enhanced mechanical performance ofthe DE composites. Dielectric property measurement showed that DE composites containing walnut polyphenolsmodified BT particles (WNBT) had higher dielectric constants and lower dielectric losses than that of DEs …

The Fabrication And Properties Of Magnetorheological Elastomers Employing Bio-Inspired Dopamine Modified Carbonyl Iron Particles, Yanfen Zhou, Lele Li, Wenyue Li, Shipeng Wen, Liang Jiang, Stephen Jerrams, Jianwei Ma, Shaojuan Chen

Articles

To obtain magnetorheological elastomers (MREs) with improved mechanical properties and exhibiting an enhanced magnetorheological (MR) effect, bio-inspired dopamine modification has been used to improve the functionality at the surface of carbonyl iron (CI) particles. Various techniques including x-ray photoelectron spectroscopy (XPS), scanning electron microscopy (SEM) and transmission electron microscopy (TEM) were used to confirm that a polydopamine (PDA) layer of about 27.5 nm had been successfully deposited on the surface of the carbonyl iron particles prior to their inclusion in the MRE composites. The magnetic properties of PDA modified CI particles were shown to be almost the same as those …

Influence Of Graphene Oxide And Carbon Nanotubes On The Fatigue Properties Of Silica/Styrene-Butadiene Rubber Composites Under Uniaxial And Multiaxial Cyclic Loading, Zongchao Xu, Stephen Jerrams, Hao Guo, Yanfen Zhou, Liang Jiang, Yangyang Gao, Liqun Zhang, Li Liu, Shipeng Wen

Articles

The influence of equivalent replacement of silica (SiO2) by carbon nanotubes (CNT) or graphene oxide (GO) on the microstructure, mechanical and fatigue behaviors of SiO2/styrene-butadiene rubber (SBR) composites was investigated. Results showed that the synergistic effect between CNT (or GO) and SiO2 was beneficial for the filler network and improved the mechanical properties of SBR composites. Furthermore, the introduction of CNT (or GO) led to low crack growth rates and the crack propagation tips were easy to deflection. Under multiaxial fatigue conditions, the maximum engineering stress was determined to be a reliable fatigue life predictor for SBR composites.

Enhanced Fatigue And Durability Of Carbon Black/Natural Rubber Composites Reinforced With Graphene Oxide And Carbon Nanotubes, Hao Guo, Stephen Jerrams, Zongchao Xu, Yanfen Shou, Liang Jiang, Liqun Zhang, Li Liu, Shipeng Wen

Articles

Graphene oxide (GO) sheets and carbon nanotubes (CNTs) are of nanometer size and offer large shape factors which are beneficial in reducing crack propagation rates of composites when used in carbon black (CB) reinforced natural rubber (NR), thereby prolonging the service lives of rubber composites. In this research, CNT-CB/NR and GO-CB/NR composites were prepared by partially replacing CB with one-dimensional CNTs and two-dimensional flaky graphene oxide GO, respectively. The results showed that the complex filler dispersion in NR matrices was improved due to the isolation effect between the different fillers. The strain-induced crystallization (SIC) ability of CB/NR was effectively enhanced …

Enhanced Gas Barrier Properties Of Graphene Oxide/Rubber Composites With Strong Interfaces Constructed By Graphene Oxide And Sulfur, Long Zheng, Stephen Jerrams, Zongchao Xu, Liqun Zhang, Li Liu, Shipeng Wen

Articles

Constructing strong interfacial interactions and complex filler networks is crucial to establishing high gas barrier properties in rubber composites. In this research, sulfur-graphene oxide (S-GO) hybrids were prepared by in situ growth of sulfur on the surfaces of GO sheets. The S-GO hybrids were also introduced into butadiene styrene rubber (SBR) using a green method of latex compounding. Results showed that sulfur could melt and spread on the surface of the GO during the crosslinking process at high temperatures. This process prevented the aggregation of GO and resulted in a fine dispersion of GO and complex filler networks in S-GO/SBR …

Enhanced Covalent Interface, Crosslinked Network And Gas Barrier Property Of Functionalized Graphene Oxide/Styrene-Butadiene Rubber Composites Triggered By Thiol-Ene Click Reaction, Long Zheng, Stephen Jerrams, Tian Su, Zongchao Xu, Liqun Zhang, Li Liu, Shipeng Wen

Articles

The high gas barrier property of a rubber composite is of great significance for reducing the exhaust gas emissions due to tire rolling resistance and hence the contribution this factor makes to environmental protection. Enhanced covalent interfaces and crosslinked networks are crucial to the gas barrier property of rubber composites. In this research, γ-mercaptopropyltriethoxysilane (MPS) modified GO (MGO)/styrene-butadiene rubber (SBR) composites were prepared by a synergetic strategy of latex compounding method and thiol-ene click reaction. It was found that the mercapto groups in MGO reacted with the vinyl groups in SBR molecules through thiol-ene click reaction during the crosslinking process …

Classification And Biological Identity Of Complex Nano Shapes, Luca Boselli, Hender Lopez, Wei Zhang, Qi Cai, Valeria A. Giannone, Jingji Li, Alirio Moura, João M. De Araujo, Jennifer Cookman, Valentina Castagnola, Yan Yan, Kenneth A. Dawson

Articles

Everywhere in our surroundings we increasingly come in contact with nanostructures that have distinctive complex shape features on a scale comparable to the particle itself. Such shape ensembles can be made by modern nano-synthetic methods and many industrial processes. With the ever growing universe of nanoscale shapes, names such as “nanoflowers” and “nanostars” no longer precisely describe or characterise the distinct nature of the particles. Here we capture and digitise particle shape information on the relevant size scale and create a condensed representation in which the essential shape features can be captured, recognized and correlated. We find the natural emergence …

Confinement Of Monolithic Stationary Phases In Targeted Regions Of 3d-Printed Titanium Devices Using Thermal Polymerization, Marta Passamonti, Ischa L. Bremer, Suhas H. Nawada, Sinead A. Currivan, Andrea F.G. Gargano, Peter J. Schoenmakers

Articles

Abstract

In this study, we have prepared thermally initiated polymeric monolithic stationary phases within discrete regions of 3D-printed titanium devices. The devices were created with controllable hot and cold regions. The monolithic stationary phases were first locally created in capillaries inserted into the channels of the titanium devices. The homogeneity of the monolith structure and the interface length were studied by scanning a capacitively coupled conductivity contactless detector (C4D) along the length of the capillary. Homogeneous monolithic structures could be obtained within a titanium device equipped with a hot and cold jacket connected to two water baths. The confinement method …

Optimizing The Valorization Of Industrial By-Products For The Induction Healing Of Asphalt Mixtures, Amir Tabakovic, Marta Vila-Cortavitarte, Daniel Jato-Espino, Daniel Castro-Fresno

Articles

Self-healing within asphalt pavements is the process whereby road cracks can be repaired automatically when thermal and mechanical conditions are met. To accelerate and improve this healing process, metal particles are added to asphalt mixtures. However, thisapproach is costly both in economic and environmental terms due to the use of virgin metallic particles. So, even though the self-healing of asphalt mixtures has been widely addressed in experimental terms over the years, there is a lack of research aimed at modelling this phenomenon, especially with the purpose of optimizing the use of metal particles through the valorization of industrial by-products. As …

Hydcem: A New Cement Hydration Model, Niall Holmes, Denis Kelliher, Mark Tyrer

Conference papers

Hydration models are useful to predict, understand and describe the behaviour of different cementitious-based systems. They are indispensable for undertaking long-term performance and service life predictions for existing and new products for generating quantitative data in the move towards more sustainable cements while optimising natural resources. One such application is the development of cement-based thermoelectric applications.

HYDCEM is a new model to predict the phase assemblage, degree of hydration, heat release and changes in pore solution chemistry over time for cements undergoing hydration for any w/c ratio and curing temperatures up to 450C. HYDCEM, written in MATLAB, is aimed at …

Microwave Self-Healing Technology As Airfield Porous Asphalt Friction Course Repair And Maintenance System, Amir Tabakovic, Declan O'Prey, Drew Mckenna, David Woodward

Research and Innovation - Articles

A problem increasingly faced by airport authorities is the maintenance of runways. Due to their large aircraft loadings associated with take-off and landing operations, runways experience surface deterioration. Poor quality runway surfaces cannot be tolerated in such an environment. Maintenance issues must be carried out to maximise safety and minimise the risk of aircraft damage. A recent development has been the introduction of self-healing technologies such as rejuvenator encapsulation, induction and microwave heating to address these issues. This paper summarises a laboratory investigation to determine the effectiveness of microwave self-healing for crack repair of Porous Friction Course (PFC) used for …

The Influence Of Asphalt Ageing On Induction Healing Effect On Porous Asphalt Concrete, Shi Xu, Xueyan Liu, Amir Tabakovic, Erik Schlangen

Articles

Induction healing is a proven technology which is able to improve the self‐healing capacity of asphalt concrete. Healing is achieved via electromagnetic current produced by passing induction machine, where steel asphalt constituents heat up which in turn soften the bitumen in the asphalt layer, allowing it to flow and close cracks, repairing the damage. This paper reports on the study which investigated the influence of ageing on the healing capacity of Porous Asphalt (PA) concrete. Porous Asphalt concrete mix was prepared first, then subjected to an accelerated (laboratory) ageing process using a ventilated oven. In order to further evaluate the …

Optimization Of The Calcium Alginate Capsules For Self-Healing Asphalt, Shi Xu, Amir Tabakovic, Xueyan Liu, Damian Palin, Erik Schlangen

Research and Innovation - Articles

Featured Application: This self-healing technology for asphalt pavements has the potential to greatly disrupt asphalt production methods (which have been stable over the past 100 years).This paper presents a development process of ‘calcium-alginate microcapsules encapsulating an asphalt bitumen rejuvenator’. The encapsulated rejuvenator is released when required (on demand) which rejuvenates the aged binder. Once crack is initiated and starts propagating it encounters a microcapsule, energy at tip of the crack opens the microcapsule, releasing the rejuvenator (healing agent). The rejuvenator will infuse into the aged binder soften it, allowing to flow, two broken edges to get into a contact and …

Rapid Fabrication Of Silver Nanoparticle/Polydopamine Functionalized Polyester Fibers, Yanfen Zhou, Liang Jiang, Ya Guo, Zhenhua Sun, Zhiqing Jiang, Shaojuan Chen, Jianwei Ma, Stephen Jerrams

Articles

In this paper, silver nanoparticles functionalized poly(ethylene terephthalate) (PET) fibers with antimicrobial activity, electrical conductivity and good coating stability are reported. Firstly, silver plated PET fibers were fabricated by rapid polydopamine (PDA) modification followed by electroless plating. Secondly, the surface morphologies and compositions of PDA modified and silver coated PET fibers were characterized by employing scanning electron microscopy, atomic force microscopy, X-ray diffraction and energy dispersive spectrometry. Finally, the antimicrobial properties and electrical conductivity of the silver plated PET fibers were investigated. The results showed that the silver coated PET fibers exhibited excellent antimicrobial activity to both Escherichia coli and …

Study On Spinnability Of Pp/Pu Blends And Preparation Of Pp/Pu Bi-Component Melt Blown Nonwovens, Yanfen Zhou, Liang Jiang, Huiying Jia, Xiaolu Xing, Zhenhua Sun, Shaojuan Chen, Jianwei Ma, Stephen Jerrams

Articles

Melt blown polymer blends offers a good way to combine two polymers in the same fiber generating nonwovens with new and novel properties. In this study, polypropylene (PP) and polyurethane (PU) were blended to prepare PP/PU bicomponent melt blown nonwovens. The spinnability of PP/PU composites was investigated and PP/PU bi-component nonwovens with compositions of 95/5, 90/10, 80/20 and 70/30 were prepared by using the melt blowing technique. The melt blown fibers exhibited a ‘sea-island’ structure with PP as the continuous phase and PU as the dispersed phase. When the content of PU in the blend was above 40 %, PP/PU …

A Multiscale Model Of Protein Adsorption On A Nanoparticle Surface, David Power, Ian Rouse, Stefano Poggio, Erik Brandt, Hender Lopez, Alexander Lyubartsev, Vladimir Lobaskin

Articles

We present a methodology to quantify the essential interactions at the interface between inorganic solid nanoparticles (NPs) and biological molecules. Our model is based on pre-calculation of the repetitive contributions to the interaction from molecular segments, which allows us to efficiently scan a multitude of molecules and rank them by their adsorption affinity. The interaction between the biomolecular fragments and the nanomaterial are evaluated using a systematic coarse-graining scheme starting from all-atom molecular dynamics simulations. The NPs are modelled using a two-layer representation, where the outer layer is parameterized at the atomistic level and the core is treated at the …

The Effect Of Curing And Zirconium Content On The Wettability And Structure Of A Silicate Hybrid Sol-Gel Material, Emma Machugh, Maikki Cullen, Alicja Kaworek, Brendan Duffy, Mohamed Oubaha

Articles

Functional hybrid sol-gel coatings have been developed for numerous applications with a wide range of wettabilities. This study proposes to investigate the relationship between the structure and the wetting properties of a zirconium modified silicate hybrid sol-gel coating. The structures of the coatings were altered by varying the content of zirconium, and the curing process, while keeping the sol-gel preparation conditions identical. The structure of the materials was characterized by FTIR, 29Si NMR and SEM. The thermal properties and the wettability are identified by DSC and contact angle measurements, respectively. By corroborating the structural and wettability analyses, it is shown …

Influence Of Atmospheric Clearness On Pdlc Switchable Glazing Transmission, Aritra Ghosh, Brian Norton, Tapas K. Mallick

Articles

Electrically activated switchable polymer dispersed liquid crystal (PDLC) is suitable for adaptive windows. A particular type requires 20V to become 71% transparent while in the absence of power it is 27% transparent. Glazing transmission changes with light incident angle. As the clearness of a sky changes the fraction changes alter of direct insolation (that has an azimuthally changing incident) and diffuse insolation (that has a largely constant incident). Thus, the effective overall incident angle determining the glazing transmittance also changes. In this work for the first time, the variation of PDLC glazing transmission with clearness index has been investigated.

An Energy-Based Approach To Assess And Predict Erosive Airfoil Defouling, Arthur Rudek, Thomas-Alexander Zitzmann, Geral Russ, Barry Duignan

Articles

A dynamic indentation experiment is presented for assessment of the adhesive behavior of a range of coatings in erosive defouling of commercial aircraft engines using CO2 dry-ice. A series of experiments is presented in which particles made from a reference material (polyoxymethylene – POM) and from CO2 dry-ice are made to impact compressor airfoils under a range of impact angle and velocity conditions. The airfoils investigated are coated with an indicator material (PTFE), which is typically used to visualise the defouling effect in large scale compressor defouling experiments. In addition, fouled compressor airfoils taken from service and coated with a …

Effect Of High- And Low-Molecular-Weight Hyaluronic-Acid-Functionalized-Az31 Mg And Ti Alloys On Proliferation And Differentiation Of Osteoblast Cells, Sankalp Agarwal, Brendan Duffy, James Curtin, Swarna Jaiswal

Articles

The quality of patient care has increased dramatically in recent years because of the development of lightweight orthopedic metal implants. The success of these orthopedic implants may be compromised by impaired cytocompatibility and osteointegration. Biomimetic surface engineering of metal implants using biomacromolecules including hyaluronic acid (HA) has been used an effective approach to provide conditions favorable for the growth of bone forming cells. To date, there have been limited studies on osteoblasts functions in response to metal substrates modified with the hyaluronic acid of different molecular weight for orthopedic applications. In this study, we evaluated the osteoblasts functions such as …

An Evaluation Of The Efficiency Of Compartmented Alginate Fibres Encapsulating Rejuvenator As Asphalt Pavement Healing System, Amir Tabakovic, Luke Schuyffel, Aleksandar Karac, Erik Schlangen

Articles

This paper explores the potential methods for evaluating a healing system for asphalt pavements. The healing system under investigation involves compartmented calcium-alginate fibres encapsulating an asphalt binder healing agent (rejuvenator). This system presents a novel method of incorporating rejuvenators into asphalt pavement mixtures. The compartmented fibres are used to distribute the rejuvenator throughout the pavement mixture, thereby overcoming some of the problems associated with alternate asphalt pavement healing methods, i.e., spherical capsules and hollow fibres. The asphalt healing efficiency methods to be evaluated in this paper include: (i) standard test methods for asphalt pavements, such as the Indirect Tensile Strength …

Development Of Magnetorheological Elastomers (Mres) For Strength And Fatigue Resistance, J. Mcintyre, Stephen Jerrams

Books/Book Chapters

Natural rubber (NR)-based magnetorheological elastomers (MREs) exhibiting a reasonable switching effect were fabricated and tested. They were strong enough for use in automotive applications but still needed protection against ageing. Ethylene–propylene–diene rubber (EPDM) is a cost-effective material that is frequently used in the automotive industry because of its advantageous range of properties. With these applications in mind, it was a logical progression to the development of EPDM-based MREs. Unlike strain-crystallising NR, EPDM requires reinforcement to render its tensile and fatigue strength suitable for use in most applications. While small amounts of carbon black were sufficient for the NR-based MREs, a …

Compact Facility For Testing Steady And Transient Thermal Performance Of Building Walls, Aimee Byrne, Gerard Byrne, Anthony Robinson

Articles

Energy efficiency retrofit of buildings represents a key effort in reducing EU energy demand by 20% by 2020. However, predictions tend to overestimate savings by large percentages. The shortfall in savings can be attributed to incorrect predictive techniques, comfort takeback along with other behavioural and workmanship variables. Common predictive techniques related to heat loss tend to be based on the U-value of the building envelope. This paper presents the design of a more straightforward and compact version of the traditional Hot-Box apparatus (measures U-value) which instead determines the thermal resistance of samples of building envelope. U-value includes the need to …

Optimising The Performance Of Cement-Based Batteries, Aimee Byrne, Shane Barry, Niall Holmes Dr., Brian Norton

Articles

The development of a battery using different cement-based electrolytes to provide a low but potentially sustainable source of electricity is described. The current, voltage, and lifespan of batteries produced using different electrolyte additives, copper plate cathodes, and (usually) aluminium plate anodes were compared to identify the optimum design, components, and proportions to increase power output and longevity. Parameters examined include water/cement ratio, anode to cathode surface area ratio, electrode material, electrode spacing, and the effect of sand, aggregate, salts, carbon black, silica fume, and sodium silicate on the electrolyte. The results indicate that the greatest and longest lasting power can …

Application Of Phase Shifting Electronic Speckle Pattern Interferometry In Studies Of Photoinduced Shrinkage Of Photopolymer Layers, Mohesh Moothanchery, Viswanath Bavigadda, Manojit Pramanik, Vincent Toal, Izabela Naydenova

Articles

Photoinduced shrinkage occurring in photopolymer layers during holographic recording was determined by Phase Shifting Electronic Speckle Pattern Interferometry. Phase maps were calculated from the changes in intensity at each pixel due to the phase differences introduced between object and reference beams. Shrinkage was then obtained from the changes in phase as recording proceeded. The technique allows for whole field measurement of the dimensional changes in photopolymers during holographic recording.

Daylighting And Thermo-Electrical Performance Of An Autonomous Suspended Particle Device Evacuated Glazing, Aritra Ghosh

Doctoral

Suspended particle device (SPD) glazing is an AC powered switchable glazing. PV powered SPD evacuated (vacuum) glazing was proposed with the potential of reducing the heating demand, cooling demand and artificial lighting demand of a building. To achieve an autonomous SPD vacuum glazing, semi empirical simulation and outdoor characterisation was explored in this thesis. Transmission of SPD glazing (area 0.058 m2) varied from 5% when opaque to 55% when transparent in the presence of 110 V, 0.07 W AC supply was characterised in outdoor test cell in Dublin. The SPD glazing has variable spectral transmission in the presence of variable …

State-Of-The-Art Review Of Cathodic Protection For Reinforced Concrete Structures, Aimee Byrne, Niall Holmes, Brian Norton

Articles

Cathodic protection (CP) limits the corrosion of a metal surface by making it the cathode of an electrochemical cell. This can be achieved either by using a more active sacrificial anode to create a driving current, or by using inert anodes and impressing a current onto the cathode surface using an external direct current (DC) source. Impressed current cathodic protection (ICCP) is preferred where widespread protection is required, particularly in reinforced concrete structures. ICCP needs a constant DC power supply that is usually provided through a grid connection or independent generators. This paper presents the currently available CP systems for …