Materials Science and Engineering Commons^™

Sustainable Development - Learning Objectives, Jane Qiong Zhang, Linda Vanasupa

Materials Engineering

This document is a list of learning objectives based on the framework of Fink’s taxonomy of significant learning: foundational knowledge, application, integration, human dimension, caring, and learning how to learn. It represents the aspirations for learning that the sustainable development is based on.

Systems Thinking - Assessment, Jane Qiong Zhang, Linda Vanasupa

Materials Engineering

The document contains an assessment activity for an individual or team project in higher education. These assessments are focused on systems thinking issues related to sustainability. It is designed for the general engineering or science audience. Its design is based on the framework of the Fink Taxonomy of Significant Learning. Each assessment consists of a scenario in which the student is an actor who must address some design dilemma. The assessment also includes an estimate of the time investment, a detailed list of learning objectives with respect to the six areas of development within the Fink Taxonomy, and a suggested …

Materials - Learning Objectives, Jane Qiong Zhang, Linda Vanasupa

Materials Engineering

This document is a list of learning objectives based on the framework of Fink’s taxonomy of significant learning: foundational knowledge, application, integration, human dimension, caring, and learning how to learn. It represents the aspirations for learning that the materials is based on.

Sustainable Development - Activities, Jane Qiong Zhang, Linda Vanasupa

Materials Engineering

The document contains activities for students in higher education. These activities are focused on sustainable development issues related to sustainability. It is designed for the general engineering or science audience. Its design is based on the framework of the Fink Taxonomy of Significant Learning. Each activity includes a profile that indicates whether the activity involves direct or indirect information sources, whether the experience is doing or observing and whether it involves individual or group reflection. The profile also includes notes for faculty, an estimate of the time investment, a graphic of the developmental aims with respect to the six areas …

Systems Thinking - Learning Objectives, Jane Qiong Zhang, Linda Vanasupa

Materials Engineering

This document is a list of learning objectives based on the framework of Fink’s taxonomy of significant learning: foundational knowledge, application, integration, human dimension, caring, and learning how to learn. It represents the aspirations for learning that the systems thinking is based on.

Systems Thinking - Activities, Jane Qiong Zhang, Linda Vanasupa

Materials Engineering

The document contains activities for students in higher education. These activities are focused on systems thinking issues related to sustainability. It is designed for the general engineering or science audience. Its design is based on the framework of the Fink Taxonomy of Significant Learning. Each activity includes a profile that indicates whether the activity involves direct or indirect information sources, whether the experience is doing or observing and whether it involves individual or group reflection. The profile also includes notes for faculty, an estimate of the time investment, a graphic of the developmental aims with respect to the six areas …

Energy - Learning Objectives, Jane Qiong Zhang, Linda Vanasupa

Materials Engineering

This document is a list of learning objectives based on the framework of Fink’s taxonomy of significant learning: foundational knowledge, application, integration, human dimension, caring, and learning how to learn. It represents the aspirations for learning that the energy is based on.

Population - Learning Objectives, Jane Qiong Zhang, Linda Vanasupa

Materials Engineering

This document is a list of learning objectives based on the framework of Fink’s taxonomy of significant learning: foundational knowledge, application, integration, human dimension, caring, and learning how to learn. It represents the aspirations for learning that the population is based on.

Materials, Jane Qiong Zhang, Linda Vanasupa

Materials Engineering

This document is a set of learning materials to support the teaching of materials issues particularly related to sustainability in engineering. It is designed for the general engineering or science audience. Its design is based on the framework of the Fink Taxonomy of Significant Learning. The document is a fully-editable set of slides in open source format (pptx) that includes references to targeted learning objectives on each slide and annotations in the notes section of each slide.

Water, Jane Qiong Zhang, Linda Vanasupa

Materials Engineering

This document is a set of learning materials to support the teaching of water issues particularly related to sustainability in engineering. It is designed for the general engineering or science audience. Its design is based on the framework of the Fink Taxonomy of Significant Learning. The document is a fully-editable set of slides in open source format (pptx) that includes references to targeted learning objectives on each slide and annotations in the notes section of each slide.

Materials - Activities, Jane Qiong Zhang, Linda Vanasupa

Materials Engineering

The document contains activities for students in higher education. These activities are focused on materials issues related to sustainability. It is designed for the general engineering or science audience. Its design is based on the framework of the Fink Taxonomy of Significant Learning. Each activity includes a profile that indicates whether the activity involves direct or indirect information sources, whether the experience is doing or observing and whether it involves individual or group reflection. The profile also includes notes for faculty, an estimate of the time investment, a graphic of the developmental aims with respect to the six areas of …

Energy, Jane Qiong Zhang, Linda Vanasupa

Materials Engineering

This document is a set of learning materials to support the teaching of energy issues particularly related to sustainability in engineering. It is designed for the general engineering or science audience. Its design is based on the framework of the Fink Taxonomy of Significant Learning. The document is a fully-editable set of slides in open source format (pptx) that includes references to targeted learning objectives on each slide and annotations in the notes section of each slide.

Systems Thinking, Jane Qiong Zhang, Linda Vanasupa

Materials Engineering

This document is a set of learning materials to support the teaching of systems thinking issues particularly related to sustainability in engineering. It is designed for the general engineering or science audience. Its design is based on the framework of the Fink Taxonomy of Significant Learning. The document is a fully-editable set of slides in open source format (pptx) that includes references to targeted learning objectives on each slide and annotations in the notes section of each slide.

Water - Learning Objectives, Jane Qiong Zhang, Linda Vanasupa

Materials Engineering

This document is a list of learning objectives based on the framework of Fink’s taxonomy of significant learning: foundational knowledge, application, integration, human dimension, caring, and learning how to learn. It represents the aspirations for learning that the water is based on.

Population - Activities, Jane Qiong Zhang, Linda Vanasupa

Materials Engineering

The document contains activities for students in higher education. These activities are focused on population issues related to sustainability. It is designed for the general engineering or science audience. Its design is based on the framework of the Fink Taxonomy of Significant Learning. Each activity includes a profile that indicates whether the activity involves direct or indirect information sources, whether the experience is doing or observing and whether it involves individual or group reflection. The profile also includes notes for faculty, an estimate of the time investment, a graphic of the developmental aims with respect to the six areas of …

Design, Fabrication, And Characterization Of A Thin-Film Nickel-Titanium Shape Memory Alloy Diaphragm For Use In Micro-Electro-Mechanical Systems, Brian Joel Alvarez

Master's Theses

Previous work done at Cal Poly has shown that thin-film nickel-titanium (NiTi) can be easily sputtered onto silicon wafers and annealed to create a crystallized shape memory alloy (SMA) film. Initial work on creating devices yielded cantilevers that were highly warped due to thin-film stress created during the sputtering process. The objective of this work was to create a thin-film NiTi SMA device that could be better characterized. A membrane was selected due to the simplicity of fabrication and testing which would also oppose the thin-film stress due to the increase in attachment points to the substrate.

Silicon wafers were …

Quantitative Characterization Of Microstructure Features For 1st Generation Advanced High Strength Steels, Margarita Vidrio, Ellen Liu, Donsheng Li, Kyoo Sil Choi, Xin Sun

STAR Program Research Presentations

The role of Advanced High Strength Steels (AHSS) in the automotive industry is important because of its affordability and excellent mechanical properties. The 1st generation of AHSS achieves its preferred combination of strength and ductility by embedding harder martensite grains into softer ferritic matrix. Ductility and strength of these steels are important to safety, formability, application, and life. However, a noticeable degree of inconsistent forming behaviors has been observed in the 1st generation AHSS in production, which seems to be related to the microstructure-level inhomogeneity. The objective of this project is to grain fundamental understandings on how different microstructure level …

Effect Of Au Content On Microstructural Evolution Of Snagcu Solder Joints That Undergo Isothermal Aging And Reliability Testing, Patrick J. Hyland

Master's Theses

Electronics, especially, printed circuit boards (PCBs) are a widespread technology. Metal coatings or “surface finishes” are often added to PCB board pads and component leads during manufacturing to improve their performance. Electroplated nickel/gold over copper is a popular surface finish for printed circuit boards and component leads. The presence of gold in solder joints, however, is known to have detrimental effects referred to as gold embrittlement. It is generally understood that tin-lead solder joints with less than 3 weight percent (wt%) of gold will not experience reliability issues. The acceptable level of gold in lead-free solder joints, however, is less …

Morphology Changes In Pcpdtbt:Pcbm And P3ht:Pcpdtbt:Pcbm And Its Effect On Polymer Solar Cell Performance, Galen David Cauble

Physics

Polymer solar cell morphology is sensitive to both heat and time. By thermally annealing polymer solar cells the morphology of the devices can be altered causing immediate changes in device performance. Blending PCPDTBT:PCBM with P3HT:PCPDTBT combines the absorption characteristics of each to create a more even absorption spectrum. Subjecting PCPDTBT:PCBM, and P3HT:PCPDTBT:PCBM polymer solar cells to thermal annealing as well as recording device performance through time has shown that P3HT:PCPDTBT:PCBM devices react positively to thermal annealing (increasing from 0.8% to 1.4%) while PCPDTBT:PCBM devices have varied reactions. Furthermore, the P3HT:PCPDTBT:PCBM devices have achieved efficiencies of 1.6% in AM 1.5 compared …

Synthesis And Characterization Of Cdse-Zns Core-Shell Quantum Dots For Increased Quantum Yield, Joshua James Angell

Master's Theses

Quantum dots are semiconductor nanocrystals that have tunable emission through changes in their size. Producing bright, efficient quantum dots with stable fluorescence is important for using them in applications in lighting, photovoltaics, and biological imaging. This study aimed to optimize the process for coating CdSe quantum dots (which are colloidally suspended in octadecene) with a ZnS shell through the pyrolysis of organometallic precursors to increase their fluorescence and stability. This process was optimized by determining the ZnS shell thickness between 0.53 and 5.47 monolayers and the Zn:S ratio in the precursor solution between 0.23:1 and 1.6:1 that maximized the relative …

The Human Dimension Of Systemic Department-Level Change: A Change Agent’S Retrospective On A Case Of Reform, Linda Vanasupa

Materials Engineering

This paper represents a narrative of the process of department-level reform through the eyes of the initiating agent of change. Over the course of reform, our program has grown by 40%, primarily through retaining students. We exhibit a 10% net important rate of engineering students in the first two years of the curriculum relative to the college’s 5% mean export rate. Student freshmen SAT scores also indicate that we are attracting students with more balanced learning interests. The design of our Department Level Reform grant was to advance the knowledge of how to design engineering learning experiences that accomplish two …

The Effects Of Damage Arrestment Devices In Composite Plate Sandwiches With Fastener Holes, Mark Anderson, Nancy Hung Choy, Lacey Jones, Rita Kourskaya

Aerospace Engineering

Composite materials such as a carbon fiber are used in a variety of new technologies including aircraft, spacecraft, and motor vehicles. Carbon fiber has a high strength to weight ratio, a key advantage over other material options. This report discusses the use of composite damage arrestment devices (DADs) in composite sandwich panels with a foam core. There are three different curing cycles tested for the DADs: pressure only, vacuum only, and vacuum with 1000 lbs of pressure. Using a Tetrahedron Heat Press to cure the composite specimen and an Instron Machine to perform tensile testing, data was collected for each …

The Effects Of Cure Schedule On Properties Of Glass-Fiber Reinforced Epoxy Matrix Composites, Trevor J. Lee

Materials Engineering

Two different two-component resin systems were cured, via Differential Scanning Calorimetry, for the times recommended by their respective manufacturers. The resin cure schedules were designed to simulate typical and attainable processing conditions; they were cured at 120°F, 140°F, and 160°F, and in-mold post-cured at 200°F, 230°F, and 260°F. The resulting scans were then compared to a baseline cure for each resin system, consisting of two heating-cooling cycles at a constant rate of temperature change. These baseline cures were then used to determine the percent cure of each sample and the shift in glass transition temperature between the baseline cure and …

Final Design Review: Design Of An Integrated Solar Cell Array To Power A Solar Ear Hearing Aid Battery Recharger, Christina (Chrissa) Blattner, Scott Carey, Jared Myren, Faye Siao

Materials Engineering

As the energy of fossil fuel supplies are fast depleting due to high consumptions of energy by human beings, the need for other sources of energy, such as solar energy, has become a viable option. By creating solar cell arrays the desired voltage can be generated. The overall goal of the Solar Ear project is to create an array of photovoltaic cells connected with aluminum tracings to recharge batteries that are specifically used for hearing aids. The goal embodies two main areas: the design of a processing method to connect the cells during a micro-fabrication process and the creation of …

Dissimilar Metal Weld Variability Due To Lot Differences In Nitinol/ Stainless Steel Interface, Matthew R. Rudow

Materials Engineering

Abstract

An experiment was conducted to determine and reduce the causes of variation between a 304 Stainless Steel and super elastic Nickel Titanium dissimilar metal weld. Six factors were established to understand the cause of variation: perpendicularity, final grind, surface finish, weld force, weld pulse duration, and alignment. Using a rotational test with an air piston break pressures were established and charted in Minitab to identify trends. It was shown that weld force and weld pulse duration were the two factors that had the most influence on break strength. This data also showed that higher strength groups had less variability. …

Flexi-Focus Lens: Pdms Variable Focal Length Lens, Patrick Angulo, Alex Doyle, Dylan Mcdaniel, Michael Olivarez

Industrial and Manufacturing Engineering

The design of a variable focal length, or flexi-focus, polydimethylsiloxane (PDMS) lens incorporating a light emitting diode (LED) source is intended for future use on board commercial aircraft. Specifically, the design is intended for the Boeing 787 Dreamliner aircraft, serving as a personal reading light for the passengers seated in the cabin. Most current reading lights on board aircraft are rigid, incandescent, and have very limited freedom in terms of adjusting the emitted light. Incandescent lamps are also inefficient with respect to energy consumption and light output as well as a high heat output. In an economy of increasing demand …

Determining A Method For Rendering Low Cost Cdse(Zns) Core(Shell) Quantum Dots Aqueous Soluble Via Amphiphilic Polymer Wrapping, Patrick Mcbride

Materials Engineering

Herein is described the procedure of two amphiphilic polymer wrapping techniques that may be employed for obtaining aqueous soluble quantum dots (QDs) for use in biological fluorescent imaging applications. The advent of QDs has led to new nanoscale fluorescent materials that exhibit unparalleled quantum yields (QYs), high resistance to photobleaching, tunable emissions, and
absorption over a large optical range. However, the QD synthesis employed here at Cal Poly to obtain bright, photostable CdSe(ZnS) core(shell) QDs involves the use of organic solvents and surfactants, leading to hydrophobic QDs. Since all of biology relies on aqueous solubility, this hydrophobicity creates a major …

Artificial Muscle Project: Process Development Of Polydimethyl Siloxane Thin Films For Use In Dielectric Electroactive Polymer Artificial Muscle Actuators, Vincent J. Gayotin, Richard W. Morrison, Paul A. Preisser

Materials Engineering

An artificial muscle design was created founded on the principles of a dielectric electroactive polymer (DEAP), which is fundamentally similar to a capacitor. A polydimethyl siloxane (PDMS)-based elastomer, Sylgard 184 from Dow Corning, was chosen for the design and spun coat onto polystyrene (PS) Petri dishes at varying speeds to create a thin film, using speeds of 2000 rpm, 3000 rpm, 4000 rpm, 5000 rpm, and 6000 rpm. The film thicknesses were measured optically through use of a microscope with coupled computer imaging software to generate a characteristic curve of film thickness to spin speed, achieving a minimum film thickness …

Design And Characterization Of A Process For Bulk Synthesis Of Cadmium Selenide Quantum Dots, Susan Harada

Materials Engineering

The objective of the process is to synthesize quantum dots that will fluoresce over the visible spectrum of 450 to 650nm; then to mix the quantum dots together in a polymer matrix so that when illuminated with a blue LED the mixture yields “white” light. The current quantum dot synthesis is a chemical process that involves adding a room temperature Se-TOP precursor to a 225°C Cd precursor solution to cause nucleation and growth of nanoparticles. This method, however, only yields quantum dots that fluoresce in the 520 to 600nm range. In order to create the “white” light phosphor replacement, red …

Materials Characterization Of Bamboo And Analysis Of Bonding Strength And Internal Strength As A Structural Member In Reinforced Concrete, Nithi Plangsriskul, Nicholas Dorsano

Materials Engineering

This study evaluates the potential to utilize bamboo as reinforcement in concrete structural members.  In this project, the mechanical properties of bamboo were tested, specifically force required to embed a 0.5” diameter ball 0.016” into the bamboo samples and its bonding strength with concrete.  One type of bamboo, Bambusa Oldhamii, was cut into eight sections, approximately 2.54 cm wide, along the length of the culm.  The compression test recorded the bamboo’s strength at eight points along the length of the internode and at three points along the transverse direction of each specimen.  Bambusa Oldhamii’s specimen base 1 data for inner, …