Open Access. Powered by Scholars. Published by Universities.®

Materials Science and Engineering Commons™

Open Access. Powered by Scholars. Published by Universities.®

Air Force Institute of Technology

Discipline
Keyword
Publication Year
Publication
Publication Type

Articles 241 - 270 of 329

Full-Text Articles in Materials Science and Engineering

Electrical Activation Studies Of Silicon Implanted Alx Gal-X N And Coimplanted Gan, Elizabeth A. Chitwood Mar 2003

Electrical Activation Studies Of Silicon Implanted Alx Gal-X N And Coimplanted Gan, Elizabeth A. Chitwood

Theses and Dissertations

A comprehensive study of the electrical activation of silicon implanted AlxGa1-xN was performed as a function ion dose, anneal temperature, and aluminum mole fraction, Also, GaN coimplanted with silicon and nitrogen was investigated. Room temperature Hall effect measurements were used to determine carrier concentration and mobility. All the samples had a 500 Å encapsulant of AlN, and were implanted at room temperature with 200 keV silicon ions at doses ranging from 1x1013 to 1x1015 /sq cm. The GaN was also implanted with nitrogen under the same conditions in doses of 9x1012 to 9x10 …

Go to article

Luminescence Studies Of Ion-Implanted Gallium Nitride And Aluminum Gallium Nitride, Erin N. Claunch Mar 2003

Luminescence Studies Of Ion-Implanted Gallium Nitride And Aluminum Gallium Nitride, Erin N. Claunch

Theses and Dissertations

Recently, research on the wide bandgap semiconductors such as GaN and Al(x)Ga(1-x)N became very popular for their applications on various devices. Therefore comprehensive and systematic luminescence studies of Si implanted AlxGa1-xN, Mg doped GaN, and Si+N implanted GaN grown on sapphire substrates by molecular beam epitaxial method have been made as a function of ion dose and anneal temperature.

Go to article

Characterization Of The Optical And Electrical Properties Of Proton-Irradiated 4h-Silicon Carbide, Heather C. Crockett Mar 2002

Characterization Of The Optical And Electrical Properties Of Proton-Irradiated 4h-Silicon Carbide, Heather C. Crockett

Theses and Dissertations

Epitaxial n-type 4H-silicon carbide (SiC) is irradiated with 2 MeV protons to evaluate the dislocation damage effects on the optical and electrical characteristics of the material. Semiconductor materials with a high tolerance to radiation fields have applications in several aerospace power and satellite systems. SiC is under investigation due to its potential for such space material applications. The optical properties of the material are investigated using temperature-dependent photoluminescence (PL) and the effects of proton irradiation on the electrical properties are evaluated using current-voltage measurements and constant-voltage deep level transient spectroscopy (CV-DLTS). Subsequent high-temperature thermal annealing and recovery of the irradiated …

Go to article

Fretting Fatigue Behavior Of A Titanium Alloy Ti-6al-4v At Elevated Temperature, Onder Sahan Mar 2002

Fretting Fatigue Behavior Of A Titanium Alloy Ti-6al-4v At Elevated Temperature, Onder Sahan

Theses and Dissertations

The purpose of this research is to investigate the fretting fatigue behavior of the titanium alloy Ti-6Al-4V at elevated temperature is investigated. Fretting and plain fatigue experiments are conducted at 260 °C. Crack initiation location and crack initiation orientation is measured and fretting and plain fatigue life data of the specimens from these tests are obtained. Fatigue parameters capable of predicting the number of cycles to specimen failure, the crack location and the crack orientation along the contact surface are analyzed. The parameters are calculated by using the computed stresses and strains obtained from the finite element analysis. The mechanisms …

Go to article

Smart Structures For Control Of Optical Surfaces, D. Michael Sobers Jr. Mar 2002

Smart Structures For Control Of Optical Surfaces, D. Michael Sobers Jr.

Theses and Dissertations

The development of lightweight, large-aperture optics is of vital importance to the Department of Defense and the US Air Force for advancing remote sensing applications and improving current capabilities. Synthetic polymer optics offer weight and flexibility advantages over current generation glass mirrors, but require active control to maintain tight surface figure tolerances. This research explores the feasibility of using imbedded piezoelectric materials to control optical surfaces. Membrane-based and stiff piezo-controlled mirrors were constructed to develop and validate control techniques. Test results verified that surface control on the order of tens of wavelengths is possible using these systems.

Go to article

Measurements Of Neutron Induced Surface And Bulk Defects In 4h Silicon Carbide, Kent T. Jones Mar 2002

Measurements Of Neutron Induced Surface And Bulk Defects In 4h Silicon Carbide, Kent T. Jones

Theses and Dissertations

Epitaxial n-type 4H-silicon carbide (SiC) is irradiated with 2 MeV protons to evaluate the dislocation damage effects on the optical and electrical characteristics of the material. The optical properties of the material are investigated using temperature-dependant photoluminescence (PL) and the effects of proton irradiation on the electrical properties are evaluated using current-voltage measurements and constant-voltage deep level transient spectroscopy (CV-DLTS). Subsequent high-temperature thermal annealing and recovery of the irradiated material is investigated over the temperature range of 900-1500°C. Proton-induced irradiation damage is apparent in the 4H-SiC material, affecting both the optical and electrical characteristics of the devices. The radiative behavior …

Go to article

Electrical Activation Studies Of Ion Implanted Gallium Nitride, James A. Fellows Nov 2001

Electrical Activation Studies Of Ion Implanted Gallium Nitride, James A. Fellows

Theses and Dissertations

A comprehensive and systematic electrical activation study of Si-implanted GaN was performed as a function of ion implantation dose, anneal temperature, and implantation temperature. Additionally, Mg-implanted GaN was also investigated. Temperature-dependent Hall effect measurements and photoluminescence (PL) spectra were used to characterize the samples. GaN wafers capped with AlN were implanted with Si ions at doses ranging from 1x1013 to 5x1015 cm-2 and annealed from 1050 to 1350 °C. The optimum anneal temperature for samples implanted with the higher Si doses is around 1350 °C, exhibiting nearly 100% electrical activation efficiency. Exceptional mobilities and carrier concentrations were …

Go to article

Time-Resolved Photoluminescence Of Inas/Gainsb Quantum Well Lasers, Michael R. Mckay Jun 2001

Time-Resolved Photoluminescence Of Inas/Gainsb Quantum Well Lasers, Michael R. Mckay

Theses and Dissertations

In the world of semiconductor photonic device fabrication, one important objective may be to extract as much light as possible from the device. In these devices, photons are created when electrons recombine with holes by transitioning from a high-energy state to a lower one. Unfortunately, electron-hole recombination does not always result in the formation of a photon. There are three basic types of recombination: the first results in the formation of a photon and is called radiative recombination; and the second and third, known as Shockley-Read-Hall and Auger recombination, result in the heating of the device and do not produce …

Go to article

Single-Sided Noninvasive Inspection Of Multielement Sample Using Fan-Beam Multiplexed Compton Scatter Tomography, Matthew A. Lange Jun 2001

Single-Sided Noninvasive Inspection Of Multielement Sample Using Fan-Beam Multiplexed Compton Scatter Tomography, Matthew A. Lange

Theses and Dissertations

As aircraft age, corrosion forms upon unobservable surfaces, particularly at the junction of the sheet aluminum and the steel rivets used to attach the sheets to the airframe, degrading the aircraft s airworthiness. Previous research developed a noninvasive technique for the evaluation of the material composition of aluminum surfaces, utilizing the information encoded in the energy spectra of Compton-scattered gamma emissions. The spectra are gathered by a six-element, high purity germanium detector array. A, first principles, deterministic computer code is used to reconstruct a two-dimensional map of the electron density of aluminum samples. Previous efforts, to image pure aluminum samples, …

Go to article

Photoluminescence Of Single Quantum Well Structures In Gallium Arsenide, Christian A. Bartholomew Mar 2001

Photoluminescence Of Single Quantum Well Structures In Gallium Arsenide, Christian A. Bartholomew

Theses and Dissertations

The continued development of state-of the-art semiconductor technologies and devices by the United States Air Force and the Department of Defense requires accurate and efficient techniques to evaluate and model these new materials. Of particular interest to the Air Force are quantum well structures which can be used for small-scale laser sources in fly-by-light applications, as efficient infrared countermeasures to heat-seeking missiles, or as advanced seekers in optically guided missiles. This thesis provides the initial experimental procedures and data necessary to begin producing accurate yet robust models. Although carrier effective masses could not be evaluated using hot-electron photoluminescence, photoluminescence excitation …

Go to article

Numerical Study Of Optical Delay In Semiconductor Multilayer Distributed Bragg Reflector And Tunable Microcavity Structures, Michael I. K. Etan Mar 2001

Numerical Study Of Optical Delay In Semiconductor Multilayer Distributed Bragg Reflector And Tunable Microcavity Structures, Michael I. K. Etan

Theses and Dissertations

The Air Force has a growing need for the greater bandwidth, speed, and flexibility offered by optical communication links. Future space systems and airborne platforms will most likely use optical signals for efficient power transmission and to minimize the possibility of spoofing and eavesdropping. Tunable optical delays play an important role in the implementation of free space optical communication links. The primary challenge in implementing these systems is the active maintenance of coherent wave fronts across the system's optical aperture. For space applications, this aperture may he hundreds of meters in diameter. Spatial segmentation of a large aperture into smaller …

Go to article

Optical And Etching Studies Of Native Aluminum Oxide Layers For Use In Microcavity Photonic Devices, William L. Bernhard Mar 2001

Optical And Etching Studies Of Native Aluminum Oxide Layers For Use In Microcavity Photonic Devices, William L. Bernhard

Theses and Dissertations

Optical communication and computing systems are required to meet future information transfer and processing needs. Microcavity devices serve as an enabling technology to implement and integrate optoelectronic systems. It is important to understand the optical and mechanical properties of materials utilize within microcavity devices. Only then is it possible to accurately model and analyze structures. Microcavity structures incorporating a high aluminum content AlGaAs layers are designed, grown, processed, and measured. The processing of these devices includes the conversion of high aluminum-content AlGaAs layers to native aluminum oxide (AlO) layers through the process of thermal oxidation. This selective conversion of microcavity …

Go to article

Fatigue Response Of Thin Stiffened Aluminum Cracked Panels Repaired With Bonded Composite Patches, Jason B. Avram Mar 2001

Fatigue Response Of Thin Stiffened Aluminum Cracked Panels Repaired With Bonded Composite Patches, Jason B. Avram

Theses and Dissertations

This research investigated the fatigue response of precracked and patched 2024-T3 Aluminum panels with stiffeners. Patches were single-sided, unidirectional three ply boron/epoxy. Stiffeners were 2024-T3 aluminum and were riveted and bonded on. Disbonds were introduced into the repair bondline by inserting teflon strips. Three disbond configurations were investigated rack tip disbond (CTD) located at the edge of the patch in the path of crack propagation, full-width disbond (FWD) covering the entire crack, and end disbond (ED) located at each end of the patch and covering the full width. Each repaired panel was subjected to tension/tension cyclic fatigue with a maximum …

Go to article

Mechanics Of A Functionally-Graded Titanium Matrix Composite, G. Brandt Miller Mar 2000

Mechanics Of A Functionally-Graded Titanium Matrix Composite, G. Brandt Miller

Theses and Dissertations

Functionally-graded Titanium Matrix Composites, (F/G TMCs) combine the ideal properties of titanium matrix composites with the more practical machining qualities of monolithic (unreinforced) alloy. This material shows great promise in application to aerospace structural components - even in parts whose design requirements have defied the use of composite materials in the past. Successful implementation of such a material would lead to enhanced aircraft performance. However, the basic properties of a functionally-graded titanium matrix composite need to be investigated. The composite/alloy transition region, or joint area, may be less strong than its constituents and therefore determine the overall performance of the …

Go to article

Optical Investigation Of Molecular Beam Epitaxy AlXGa1-XN To Determine Material Quality, Judith L. Mcfall Mar 2000

Optical Investigation Of Molecular Beam Epitaxy AlXGa1-XN To Determine Material Quality, Judith L. Mcfall

Theses and Dissertations

The purpose of this research was to determine the quality of AIGaN samples with various mole fractions of aluminum doped with silicon. The samples utilized for this study were composed of an AIN buffer layer sandwiched between the sapphire substrate and AIGaN epilayer grown by molecular beam epitaxy (MBE). Cathodoluminescence (CL) and photoluminescence (PL) were employed to determine the mole fraction of aluminum in each sample. These techniques also gave insight into the material's nonuniformity, defects, and impurities. CL was run at 4 different beam energies (2,5,10, & 15 keV) with four different currents (1,10,50, & 90 µA) for the …

Go to article

Chemical Mechanical Polishing Optimization For 4h-Sic, Craig L. Neslen Mar 2000

Chemical Mechanical Polishing Optimization For 4h-Sic, Craig L. Neslen

Theses and Dissertations

Scratch free surfaces are required for substrates used in epitaxial growth. Silicon carbide (SiC) is a substrate material that is used in the epitaxial growth of SiC, GaN, and InGaN electronic devices. Preliminary chemical mechanical polishing (CMP) studies of 1 3/8" 4H-SiC wafers were performed in an attempt to identify the polishing parameter values that result in a maximum material removal rate and thus reduce substrate polishing time. Previous studies reported increased material removal rates associated with increasing polishing temperature, slurry pH, pressure, and polishing pad speed. In the current study, the effects of temperature, slurry pH, polishing pressure, and …

Go to article

Effects Of Foreign Object Damage From Small Hard Particles On The High-Cycle Fatigue Life Of Ti-6a1-4v, Joseph L. Hamrick Ii Dec 1999

Effects Of Foreign Object Damage From Small Hard Particles On The High-Cycle Fatigue Life Of Ti-6a1-4v, Joseph L. Hamrick Ii

Theses and Dissertations

Thin rectangular samples of Ti-6Al-4V were damaged by four methods to represent foreign object damage found in turbine engine blades: 1) impact with 2 mm and 5 mm diameter glass spheres at 305 m/s, 2) impact with 2 mm and 4 mm diameter steel spheres at 305 m/s, 3) quasi-static displacement controlled indentation using steel chisels with 1 mm, 2 mm and 5 mm diameter tips and 4) shearing notches with a 2 mm diameter chisel point under a quasi-static loading condition. Finite element analysis was used to study the relationship between the stress state created by the plastic damage …

Go to article

Electrical And Optical Characterization Of Intrinsic And Ion-Implantation Induced Defects In 6h- And 4h-Sic, Michael B. Scott Dec 1999

Electrical And Optical Characterization Of Intrinsic And Ion-Implantation Induced Defects In 6h- And 4h-Sic, Michael B. Scott

Theses and Dissertations

Deep level transient spectroscopy (DLTS), Hall effect, and cathodolummescence (CL) measurements are used to characterize the intrinsic and ion-implantation induced defects in high-temperature (475 and 500 °C) ion-implanted epitaxial n-type 6H- and 4H-SiC, ion-implanted with Cr, Mg, Ar, N, and P atoms. Comparison of room-temperature and high-temperature ion-implanted 6H-SiC:Mg and :Cr indicate the significance of high-temperature ion implantation on the activation of the ion-implanted atoms and damage-recovery of the crystalline lattice. The effects of high-temperature annealing on both damage-recovery and implanted ion activation are detected and analyzed, from 1200 to 1800 °C. Trap parameters of both damage-related and species-related defects …

Go to article

Output Control Of Vertical Microcavity Light Emitting Device, James A. Lott Apr 1999

Output Control Of Vertical Microcavity Light Emitting Device, James A. Lott

AFIT Patents

An improved intracavity sensor based output power control for microcavity light emitting devices. An improved phototransistor transducer is both configured and physically disposed so that it passively transmits the spurious optical energy output of the microcavity light emitting device while simultaneously generating a light determined electrical signal of easily used large magnitude that is nearly free of error. The base-collector region of the transistor is disposed with a quantum well absorbing layer and produces a signal responsive to a selected emission wavelength. The configuration of the optical energy communicating transducer is arranged so that it is improved in sensitivity and …

Go to article

Electrical Characterization Of Ion-Implanted 4h-Silicon Carbide, Christian P. Morath Mar 1999

Electrical Characterization Of Ion-Implanted 4h-Silicon Carbide, Christian P. Morath

Theses and Dissertations

Electrical characterization has been performed on ion-implanted p-type 4H-SiC to assess the activation efficiency and implantation-related damage recrystallization with the intention of developing an implantation/annealing scheme. Low doped (Na - Nd = 5x10(exp 15)/cu cm) epitaxial p-type layers grown by MOCVD were implanted with Al or B at doses ranging from 1x10(exp 13) to 1x10(exp 14)/sq cm at room temperature or 500 deg. C. The electrical technique of Temperature Dependent Hall Effect (TDHE) indicated that Al and B act as shallow acceptors 4H-SiC with ionization energies of ^252 and ^285 meV, respectively. The highest activation efficiency for Al and B …

Go to article

Measurement Of Ultrafast Carrier Recombination Dynamics In Mid-Infrared Semiconductor Laser Material, William T. Cooley Dec 1997

Measurement Of Ultrafast Carrier Recombination Dynamics In Mid-Infrared Semiconductor Laser Material, William T. Cooley

Theses and Dissertations

Shockley-Read-Hall, radiative, and Auger recombination rates in mid-infrared laser structures are measured and reported using time resolved photoluminescence (TRPL) frequency upconversion. The mid-IR lasers studied were actual InAsSb/InAlAsSb multiple-quantum-well (MQW) diode lasers emitting near 3.3 micrometers which were previously characterized for laser performance. This effort extends the initial studies and reports on the carrier recombination dynamics. Shockley-Read-Hall, radiative and Auger recombination rates at low temperature (77 K) were measured and found to be ASRH ≈ 10 x 107sec-1, Brad ≈ 2 x 10-10 cm3sec-1 and CAuger < 10-29 cm6 …

Go to article

Experimental Investigation Of Nonlinear Dynamics In Single Mode Semiconductor Laser Diodes With Phase Conjugate Feedback, Gordon T. Hengst Aug 1997

Experimental Investigation Of Nonlinear Dynamics In Single Mode Semiconductor Laser Diodes With Phase Conjugate Feedback, Gordon T. Hengst

Theses and Dissertations

The semiconductor laser diode offers a unique system to investigate nonlinear dynamics when optical feedback is applied. Although there is extensive research of laser diodes with optical feedback from normal dielectric mirrors, very little has been done experimentally to analyze the effects of degenerate phase conjugate feedback from a BaTiO3 crystal. This research experimentally investigated the dynamics of a single-mode laser diode with weak phase conjugate feedback using both the self-pumped and double phase conjugate geometries. The experimental results validated a mathematical model which numerically evaluates the Lang-Kobayahsi coupled differential equations. The model simulated the nonlinear behavior of a …

Go to article

Thickness Effects On A Cracked Aluminum Plate With Composite Patch Repair, Joel J. Schubbe Jun 1997

Thickness Effects On A Cracked Aluminum Plate With Composite Patch Repair, Joel J. Schubbe

Theses and Dissertations

Post-repair fatigue crack growth was investigated in 3.175, 4.826, and 6.35 mm thick aluminum panels asymmetrically repaired with boron/epoxy composite patches bonded to the plates with FM73 sheet adhesive. Patches were uniaxial with patch to panel stiffness ratios ranging from 0.46 to 1.3. Experimental fatigue tests were carried out at 120 MPa, R=0.1, and 10 Hz (sinusoidal) to measure patched and unpatched face crack lengths, center crack opening displacements, and selected strains. Crack growth data was acquired using optical, eddy current, and post-test analysis methods. Crack growth rates were calculated using the incremental polynomial method. A three-layer Mindlin plate finite …

Go to article

Investigation Of The Optical Properties Of Ordered Semiconductor Materials, Jack E. Mccrae Jr. Jan 1997

Investigation Of The Optical Properties Of Ordered Semiconductor Materials, Jack E. Mccrae Jr.

Theses and Dissertations

Optical studies have been conducted upon CdGeAs2 and ZnGeP2, two of the most promising semiconductors being developed for mid-infrared non-linear optics applications. These experiments included photoluminescence (PL) studies of both compounds as well as photoreflectance (PR) measurements upon CdGeAs2. In addition, Hall effect measurements were carried out upon CdGeAs2, to aid in interpretation of the optical data. PL was measured as a function of laser power, sample temperature, and crystal orientation for CdGeAs2. One broad weak peak near 0.38 eV, and another somewhat narrower and often far brighter peak near 0.57 …

Go to article

Residual Strength And Fatigue Characterization Of Scs-6/Ti-6-4, Sang-Myung Lee Dec 1996

Residual Strength And Fatigue Characterization Of Scs-6/Ti-6-4, Sang-Myung Lee

Theses and Dissertations

Metal matrix composite have potential in a variety of aerospace applications, but they should be better understood before they can be employed. Despite the many studies that have contributed to characterizing the fatigue response of titanium alloy MMCs, few have researched the residual strength. The purpose of this study was to investigate the residual strength and the frequency effects on the residual strength of an unidirectional laminate of SCS-6/Ti-6-4, a titanium alloy matrix based composite under tension-tension, load-controlled conditions at elevated temperatures and different frequencies. Specimens were fatigued at frequencies of 1 and 0.01Hz, and at maximum stress of 900MPa …

Go to article

Optical Detection Properties Of Silicon-Germanium Quantum Well Structures, Michael R. Gregg Oct 1996

Optical Detection Properties Of Silicon-Germanium Quantum Well Structures, Michael R. Gregg

Theses and Dissertations

A study has been carried out on Si/SiGe multi quantum well structures to determine their applicability as normal incidence infrared detectors in the spectral range of 2-12 micrometers. The research effort was primarily experimental; however, extensive calculations were performed to initially explain the experimental data and then used to design subsequent structures. Multiple quantum well structures grown on both Si[001] and Si[110] substrates via molecular beam epitaxy were studied by photoluminescence, absorption, and photoresponse measurements over a wide parameter space. Variables included quantum well depth and width, well doping, number of wells and growth temperature. Well widths were varied from …

Go to article

Low-Velocity Impact On Composite Sandwich Plates, Eric J. Herup Jul 1996

Low-Velocity Impact On Composite Sandwich Plates, Eric J. Herup

Theses and Dissertations

The objective of the research is to analytically model the response of composite sandwich plates to low velocity impact. A displacement based, plane stress, finite element code is modified for this purpose. Major new algorithms include 5th order Hermitian interpolation, three dimensional equilibrium integration for transverse stress calculations, sandwich core modeling as an elastic plastic foundation, loading by simulated contact with a spherical indentor, adaptive mesh, damage prediction, damage progression via stiffness reduction, and local-global analysis for displacement. An experimental effort is also included in which composite sandwich plates with graphite epoxy facesheets and Nomex honeycomb core are subjected to …

Go to article

Design Of Gradient Index Optical Thin Films, Jeffrey J. Druessel Jun 1996

Design Of Gradient Index Optical Thin Films, Jeffrey J. Druessel

Theses and Dissertations

Gradient index thin films provide greater flexibility for the design of optical coatings than the more conventional 'layer' films. In addition, gradient index films have higher damage thresholds and better adhesion properties. This dissertation presents an enhancement to the existing inverse Fourier transform gradient index design method, and develops a new optimal design method for gradient index films using a generalized Fourier series approach. The inverse Fourier transform method is modified to include use of the phase of the index profile as a variable in rugate filter design. Use of an optimal phase function in Fourier-based filter designs reduces the …

Go to article

Structural Damage Identification From Limited Measurement Data, Richard G. Cobb Mar 1996

Structural Damage Identification From Limited Measurement Data, Richard G. Cobb

Theses and Dissertations

The research focused on the development of a new method to identify damaged structural elements from a large flexible space structure on-orbit, using limited measured modal data. Limited measured modal data is loosely defined as measured data containing only a few modal frequencies and less than 10% of the total structural degrees-of-freedom. This effort was decomposed into four specific tasks. The first is the identification of partial modal properties from measured data of the nominal space structure. Second, the finite element model must be adjusted to match the measured nominal partial data. The third task is an analysis of the …

Go to article

Evaluation Of The Sensitivity Of Radar Cross Section Predictions To Uncertainties In Material Characteristics, Greg A. Barnhart Dec 1995

Evaluation Of The Sensitivity Of Radar Cross Section Predictions To Uncertainties In Material Characteristics, Greg A. Barnhart

Theses and Dissertations

The purpose of this study was to evaluate the effects of material characteristics uncertainties on Radar Cross Section (RCS) predictions. Many methods have been developed to predict the RCS of metal objects, but for material coated objects, these methods depend on the accuracy of measured material characteristics. Material characteristics of three dielectrics were measured by two separate X-band waveguide set-ups. RCS measurements were then made to evaluate the accuracy of RCS predictions using these measured material characteristics. A six inch square slab of each material was measured with and without a metal plate backing. A six inch square flat metal …

Go to article

First Prev Next Last