Materials Science and Engineering Commons^™

2024 World Fuel Cell Conference Held In Ningbo, Zhejiang, Editorial Office Of J.Electrochem.

Journal of Electrochemistry

No abstract provided.

Upcoming Meeting-The 1St Young Investigator Symposium On Electrosynthesis, Chinese Chemical Society, Chinese Society Of Electrochemistry (Cse)

Journal of Electrochemistry

No abstract provided.

Feasibility Study Of Using Energy Extracted From The Process Of Electrochemically Consumed Of Al 2024 For Powering Daily Used Electric Car, Yanuar Mohamad Marda, Rini Riastuti, Muhammad Hamka Ibrahim

Journal of Materials Exploration and Findings

Usage of green energy for transportation has become important due to the contribution of transportation activity to climate change. Electrochemical energy has been used as a source of green energy. The objective of this work is to evaluate sufficiency of energy provided by electrochemically consumed Al 2024 for supplying energy to daily used PHEV electric car. Study of previous articles, observation of typical amount of energy required, electrochemical galvanic cell experiments, and simple calculations have been conducted to determine produced energy feasibility. Electrical energy produced by consuming 340 gr of Al 2024 in galvanic cells has the total lifetime of …

Data-Driven Viewpoint For Developing Next-Generation Mg-Ion Solid-State Electrolytes, Fang-Ling Yang, Ryuhei Sato, Eric Jian-Feng Cheng, Kazuaki Kisu, Qian Wang, Xue Jia, Shin-Ichi Orimo, Hao Li

Journal of Electrochemistry

Magnesium (Mg) is a promising alternative to lithium (Li) in solid-state batteries due to its abundance and high theoretical volumetric capacity. However, the sluggish Mg-ion conduction in the lattice of solid-state electrolytes (SSEs) is one of the key challenges that hamper the development of Mg-ion solid-state batteries. Though various Mg-ion SSEs have been reported in recent years, key insights are hard to be derived from a single literature report. Besides, the structure-performance relationships of Mg-ion SSEs need to be further unraveled to provide a more precise design guideline for SSEs. In this Viewpoints article, we analyze the structural characteristics of …

Professor Yong Yang, The Editorial Board Member Of Journal Of Electrochemistry, Is Elected As A Fellow Of The Electrochemical Society, Editorial Office Of J.Electrochem.

Journal of Electrochemistry

No abstract provided.

Kai Wu, The Editorial Board Member Of Journal Of Electrochemistry And Chief Scientist Of Catl, Receives The National Science And Technology Progress Award, Editorial Office Of J.Electrochem.

Journal of Electrochemistry

No abstract provided.

Sorbitol-Electrolyte-Additive Based Reversible Zinc Electrochemistry, Qiong Sun, Hai-Hui Du, Tian-Jiang Sun, Dian-Tao Li, Min Cheng, Jing Liang, Hai-Xia Li, Zhan-Liang Tao

Journal of Electrochemistry

The unstable zinc (Zn)/electrolyte interfaces formed by undesired dendrites and parasitic side reactions greatly hinder the development of aqueous zinc ion batteries. Herein, the hydroxy-rich sorbitol was used as an additive to reshape the solvation structure and modulate the interface chemistry. The strong interactions among sorbitol and both water molecules and Zn electrode can reduce the free water activity, optimize the solvation shell of water and Zn²⁺ ions, and regulate the formation of local water (H₂O)-poor environment on the surface of Zn electrode, which effectively inhibit the decomposition of water molecules, and thus, achieve the thermodynamically stable …

Series Reports From Professor Wei’S Group Of Chongqing University: Advancements In Electrochemical Energy Conversions (1/4): Report 1: High-Performance Oxygen Reduction Catalysts For Fuel Cells, Fa-Dong Chen, Zhuo-Yang Xie, Meng-Ting Li, Si-Guo Chen, Wei Ding, Li Li, Jing Li, Zi-Dong Wei

Journal of Electrochemistry

Two major challenges, high cost and short lifespan, have been hindering the commercialization process of low-temperature fuel cells. Professor Wei’s group has been focusing on decreasing cathode Pt loadings without losses of activity and durability, and their research advances in this area over the past three decades are briefly reviewed herein. Regarding the Pt-based catalysts and the low Pt usage, they have firstly tried to clarify the degradation mechanism of Pt/C catalysts, and then demonstrated that the activity and stability could be improved by three strategies: regulating the nanostructures of the active sites, enhancing the effects of support materials, and …

First Announcement Of 76th Annual Meeting Of The International Society Of Electrochemistry, International Society Of Electrochemistry (Ise)

Journal of Electrochemistry

No abstract provided.

Surface Structures And Properties Of High-Voltage Licoo2: Reviews And Prospects, Jian-Jun Fang, Yu-Hao Du, Zi-Jian Li, Wen-Guang Fan, Heng-Yu Ren, Hao-Cong Yi, Qing-He Zhao, Feng Pan

Journal of Electrochemistry

Nowadays, the development of high-voltage LiCoO₂ (lithium cobalt oxide, LCO) cathodes has attracted the widespread attention from both the academic and industry fields. Among the multiple concerns, researches on the surface issues would provide the most effective performance optimization pathway for the synthesis of high-voltage LCO. In this work, the issues of high-voltage LCO, including the phase transitions and crack formation, the oxygen redox related issues and side reactions, as well as the surface structure degradation, have been systematically reviewed. Then, we further clarify the surface modulations, and the interplay between the surface modulation and electrolyte tuning. Finally, we …

In Situ Diffuse Reflectance Spectroelectrochemistry Of Cathode Materials In Lithium-Ion Batteries, Lu-Lu Chen, Hao-Ran Li, Wei-Yi Liu, Wei Wang

Journal of Electrochemistry

Developing in situ spectroelectrochemistry methods, which can provide detailed information about species transformation during electrochemical reactions, is very important for studying electrode reaction mechanisms and improving battery performance. Studying real-time changes in the surface of electrode materials during normal operation can be an effective way to assess and optimize the practical performance of electrode materials, thus, in situ and in operando characterization techniques are particularly important. However, batteries are hard to be studied by in situ characterization measurements due to their hermetically sealed shells, and there is still much room for battery characterizations. In this work, a specially designed battery …

Molybdenum Disulfide And Carbon Nanotubes Composite Electrode For Electrochemical Conversion Of Salinity Gradient Energy, Jia-Jun Li, Wei-Bin Zhang, Xin-Yu Liu, Jing-Lei Yang, Yi Yin, Ze-Qin Yang, Xue-Jing Ma

Journal of Electrochemistry

The ocean accounts for 97% of the total water resources on earth, covering over 70% of the map's surface area. With the continuous consumption of non-renewable energy sources such as fossil fuels and the rapid development of renewable energy, humans are increasingly paying attention to the utilization of ocean resources. Ocean energy includes tidal energy, wave energy, temperature difference energy, and salinity gradient energy. Salinity gradient energy is the energy generated by the interaction of seawater and fresh water, which is the ocean energy existing in the form of chemical energy. This energy is mostly generated in estuaries. The osmotic …

Engineering Composite Gridlines For Improved Solar Module Reliability, Andre Chavez

Electrical and Computer Engineering ETDs

Renewable energy sources, such as solar power, are rapidly expanding worldwide to meet increased energy demands. However, these sources are exposed to challenging environmental stressors, such as extreme wind, heavy snow loads, and hailstorms that can cause irreversible damage to the crystalline semiconductor solar cells. Today, single crystalline silicon solar cells dominate the market, and our work is focused on improving their reliability against environmental stressors. One of the main degradation mechanisms caused by environmental stressors is cell cracks. These microcracks can go virtually undetected and lead to reduced power output from solar modules over time. To solve this engineering …

Surface Treatments' Effects On The Capacitor's Dielectric Performance Under Electro-Thermal Stresses, Haider. M. Umran, Feipeng Wang

Karbala International Journal of Modern Science

Biaxial-oriented polypropylene (BOPP) films are characterized by unfavorable aging behavior because of their poor susceptibility to high temperatures, humidity, and high electric fields. This makes them unqualified to withstand harsh operating conditions, such as in capacitor applications. This study investigates the impact of annealing BOPP samples at 100 °C for five hours after fluorination at different times (15, 30, and 60 minutes) on their electrical and mechanical performance under electro-thermal stresses. Scanning electron microscope (SEM) images confirm that there is an increase in surface roughness and the formation of a dense layer of fluorine-containing groups monotonically with fluorination time. So, …

Recent Advances In Solar Photo(Electro)Catalytic Nitrogen Fixation, Jun-Bo Ma, Sheng Lin, Zhiqun Lin, Lan Sun, Chang-Jian Lin

Journal of Electrochemistry

Ammonia (NH₃) is an essential chemical in modern society. It is currently produced in industry by the Haber-Bosch process using H₂ and N₂ as reactants in the presence of iron-based catalysts at high-temperature (400–600 ^oC) and extremely highpressure (20–40 MPa) conditions. However, its efficiency is limited to 10% to 15%. At the same time, a large amount of energy is consumed, and CO₂ emission is inevitably. The development of a sustainable, clean, and environmentally friendly energy system represents a key strategy to address energy crisis and environmental pollution, ultimately aiming to achieve carbon neutrality. …

Joint Time-Frequency Analysis: Taking Charge Penetration Depth And Current Spatial Distribution In The Single Pore As An Example, Nan Wang, Qiu-An Huang, Wei-Heng Li, Yu-Xuan Bai, Jiu-Jun Zhang

Journal of Electrochemistry

In recent years, joint time-frequency analysis has once again become a research hotspot. Supercapacitors have high power density and long service life, however, in order to balance between power density and energy density, two key factors need to be considered: (i) the specific surface area of the porous matrix; (ii) the electrolyte accessibility to the intra-pore space of porous carbon matrix. Electrochemical impedance spectra are extensively used to investigate charge penetration ratio and charge storage mechanism in the porous electrode for capacitance energy storage. Furthermore, similar results could be obtained by different methods such as stable-state analysis in the frequency …

Automated Workflow For Redox Potentials And Acidity Constants Calculations From Machine Learning Molecular Dynamics, Feng Wang, Jun Cheng

Journal of Electrochemistry

Redox potentials and acidity constants are key properties for evaluating the performance of energy materials. To achieve computational design of new generation of energy materials with higher performances, computing redox potentials and acidity constants with computational chemistry have attracted lots of attention. However, many works are done by using implicit solvation models, which is difficult to be applied to complex solvation environments due to hard parameterization. Recently, ab initio molecular dynamics (AIMD) has been applied to investigate real electrolytes with complex solvation. Furthermore, AIMD based free energy calculation methods have been established to calculate these physical chemical properties accurately. However, …

Rational Design Of Heterostructured Nanomaterials For Accelerating Electrocatalytic Hydrogen Evolution Reaction Kinetics In Alkaline Media, Hai-Bin Ma, Xiao-Yan Zhou, Jia-Yi Li, Hong-Fei Cheng, Ji-Wei Ma

Journal of Electrochemistry

Owing to the merits of high energy density, as well as clean and sustainable properties, hydrogen has been deemed to be a prominent alternative energy to traditional fossil fuels. Electrocatalytic hydrogen evolution reaction (HER) has been considered to be mostly promising for achieving green hydrogen production, and has been widely studied in acidic and alkaline solutions. In particular, HER in alkaline media has high potential to achieve large-scale hydrogen production because of the increased durability of electrode materials. However, for the currently most prominent catalyst Pt, its HER kinetics in an alkaline solution is generally 2–3 orders lower than that …

Stability Of A Solid Oxide Cell Stack Under Direct Internal-Reforming Of Hydrogen-Blended Methane, Ya-Fei Tang, An-Qi Wu, Bei-Bei Han, Hua Liu, Shan-Jun Bao, Wang-Lin Lin, Ming Chen, Wan-Bing Guan, Subhash C. Singhal

Journal of Electrochemistry

In this work, the long-term stability and degradation mechanism of a direct internal-reforming solid oxide fuel cell stack (IR-SOFC stack) using hydrogen-blended methane steam reforming were investigated. An overall degradation rate of 2.3%·kh^–1 was found after the stack was operated for 3000 hours, indicating a good long-term stability. However, the voltages of the two cells in the stack were increased at the rates of 3.38 mV·kh^–1 and 3.78 mV·kh^–1, while the area specific resistances of the three metal interconnects in the stack were increased to 0.276 Ω·cm², 0.254 Ω·cm² and 0.249 Ω·cm^{2 …}

A Comprehensive Review Of Piezoelectric Ultrasonic Motors: Classifications, Characterization, Fabrication, Applications, And Future Challenges, Sidra Naz, Tian-Bing Xu

Mechanical & Aerospace Engineering Faculty Publications

Piezoelectric ultrasonic motors (USMs) are actuators that use ultrasonic frequency piezoelectric vibration-generated waves to transform electrical energy into rotary or translating motion. USMs receive more attention because they offer distinct qualities over traditional magnet-coil-based motors, such as miniaturization, great accuracy, speed, non-magnetic nature, silent operation, straightforward construction, broad temperature operations, and adaptability. This review study focuses on the principle of USMs and their classifications, characterization, fabrication methods, applications, and future challenges. Firstly, the classifications of USMs, especially, standing-wave, traveling-wave, hybrid-mode, and multi-degree-of-freedom USMs, are summarized, and their respective functioning principles are explained. Secondly, finite element modeling analysis for design and …

Electrospun Pt-Tio₂ Nanofibers Doped With Hpa For Catalytic Hydrodeoxygenation, Amos Taiswa, Randy L. Maglinao, Jessica M. Andriolo, Sandeep Kumar, Jack L. Skinner

Civil & Environmental Engineering Faculty Publications

Electrospinning is utilized to fabricate catalytic nanofiber scaffold for biocrude upgrading in hydrodeoxygenation (HDO) following computational studies suggesting the need for nano-catalysts for efficient HDO conversion and selectivity. Here, Pt-TiO₂ nanofibers are fabricated through electrospinning, followed by wet impregnation with a heteropoly acid (HPA), tungstosilicic acid. Intensive heat treatments were incorporated during and after processes to obtain a HPA doped Pt-TiO₂ nano-catalyst. Catalytic HDO was performed in a batch reactor with phenol as the raw biocrude dissolved in hexadecane. The HPA doped Pt-TiO₂ catalyst demonstrated promising HDO performance of 37.2% conversion and a 78.9% selectivity to oxygen …

Schaeffler Icvd Coating Machine, Louis Mcgrath

Williams Honors College, Honors Research Projects

Chemical Vapor Deposition (CVD) is mutual technology used to deposit thin film through a gaseous phase by vaporizing the solid materials. This conventional process usually requires high thermal stability of the materials, which is not applicable for most of the polymeric materials. Therefore, a novel process, initiated Chemical Vapor Deposition (iCVD) is developed by introducing the gaseous monument and initiator to form the thin film in-situ. By adjusting the free-radical polymerization in the vapor phase, a variety of thin and uniform polymer films can be achieved. Depending on the chemistry, iCVD has many categories. This report explains the design …

Extending Trailer, Alex Grove

Williams Honors College, Honors Research Projects

The goal of this research project is to revolutionize the convenience in towable transportation. This innovative design aims to enhance the versatility of pull-behind trailers by incorporating an extendable feature, allowing users to effortlessly adjust the length according to their specific needs. Whether navigating tight spaces or accommodating extra cargo, our trailer adapts to diverse situations, providing unmatched flexibility. In addition to its adjustable length, the trailer is engineered to be compactable, addressing the storage constraints often faced by users with limited space. The collapsible design ensures easy storage without compromising on functionality, making it an ideal solution for individuals …

Machine-Learning-Assisted Design Of Deep Eutectic Solvents Based On Uncovered Hydrogen Bond Patterns, Usman Lame Abbas, Yuxuan Zhang, Joseph Tapia, Md Selim, Jin Chen, Jian Shi, Qing Shao

Markey Cancer Center Faculty Publications

Non-ionic deep eutectic solvents (DESs) are non-ionic designer solvents with various applications in catalysis, extraction, carbon capture, and pharmaceuticals. However, discovering new DES candidates is challenging due to a lack of efficient tools that accurately predict DES formation. The search for DES relies heavily on intuition or trial-and-error processes, leading to low success rates or missed opportuni- ties. Recognizing that hydrogen bonds (HBs) play a central role in DES formation, we aim to identify HB features that distinguish DES from non-DES systems and use them to develop machine learning (ML) models to discover new DES systems. We first analyze the …

Electrochemical Performance Of Porous Ceramic Supported Tubular Solid Oxide Electrolysis Cell, Heng-Ji Wang, Wen-Guo Chen, Zhou-Yi Quan, Kai Zhao, Yi-Fei Sun, Min Chen, Ogenko Volodymyr

Journal of Electrochemistry

Solid oxide electrolysis cell (SOEC) is an efficient and clean energy conversion technology that can utilize electricity obtained from renewable resources, such as solar, wind, and geothermal energy to electrolyze water and produce hydrogen. The conversion of abundant intermittent energy to hydrogen energy would facilitate the efficient utilization of energy resources. SOEC is an all-ceramic electrochemical cell that operates in the intermediate to high temperature range of 500–750 ℃. Compared with traditional low temperature electrolysis technology (e.g., alkaline or proton exchange membrane cells operating at ~100 ℃), the high-temperature SOEC can increase the electrolysis efficiency from 80% to ~100%, providing …

Nitrogen-Doped Graphite Felt On The Performance Of Aqueous Quinone-Based Redox Flow Batteries, Heng Zhang, Li-Xing Xia, Shan Jiang, Fu-Zhi Wang, Zhan-Ao Tan

Journal of Electrochemistry

Modification of electrode is vitally important for achieving high energy efficiency in aqueous quinone-based redox flow batteries (AQRFBs). The modification of graphite felt (GF) was carried out by means of urea hydrothermal reaction, and simultaneously, the effects of hydrothermal reaction time on the functional groups and surface structure of nitrogen-doped graphite felt were studied. The surface morphology and defect, element content and surface chemical state of the modified electrode were characterized by scanning electron microscopy (SEM), Brunauer-Emmett-Teller (BET) test, Raman spectroscopy, and X-ray photoelectron spectroscopy (XPS). The electrochemical performance of the modified electrodes was evaluated by cyclic voltammetry, electrochemical impedance …

An In-Situ Raman Spectroscopic Study On The Interfacial Process Of Carbonate-Based Electrolyte On Nanostructured Silver Electrode, Yu Gu, Yuan-Fei Hu, Wei-Wei Wang, En-Ming You, Shuai Tang, Jian-Jia Su, Jun Yi, Jia-Wei Yan, Zhong-Qun Tian, Bing-Wei Mao

Journal of Electrochemistry

The solid-electrolyte interphase (SEI) plays a key role in anodes for rechargeable lithium-based battery technologies. However, a thorough understanding in the mechanisms of SEI formation and evolution remains a major challenge, hindering the rapid development and wide applications of Li-based batteries. Here, we devise a borrowing surface-enhanced Raman scattering (SERS) activity strategy by utilizing a size optimized Ag nanosubstrate to in-situ monitor the formation and evolution of SEI, as well as its structure and chemistry in an ethylene carbonate-based electrolyte. To ensure a reliable in-situ SERS investigation, we designed a strict air-tight Raman cell with a three-electrode configuration. Based on …

Design, Fabrication And Characterization Of Zero Power Sensor/Harvester For Smart Grid Applications, Zeynel Guler

Mechanical Engineering ETDs

This study presents a flexible sensor/harvester device to be used in both electromagnetic sensing and energy harvesting applications for smart grids. When a current passes through a wire, the sensor detects the magnetic field created by that current. The sensor magnet interacts with the wire magnetic field resulting in a transfer of energy through the piezoelectric cantilever. Piezoelectric, conductive, magnetic, and magnetostrictive composite thin films were prepared to fabricate this device.

Initially, the magnet of the cantilever was optimized considering its shape, thickness, length, taper angle etc. via both simulations and experiments. Peak to peak voltage versus cantilever position graph …

Lif-Sn Composite Modification Layer To Modify Garnet/Lithium Metal Interface, Wu Yang, Xue-Fan Zheng, Yu-Qi Wu, Zheng-Liang Gong

Journal of Electrochemistry

The growing demands for electric vehicles and consumer electronics; as well as the expanding renewable energy storage market; have promoted extensive research on energy storage technologies with low costhigh energy density and safety. Lithium (Li) metal and solid-state electrolytes are considered as important components for next-generation batteries because of their great potential for improvements in energy density and safety performance. Inorganic garnet-type solid electrolytes with high Li-ion conductivity (about 10^-3 S·cm^-1) and high shear modulus (55 GPa) are considered to be ideal solid-state electrolytes; however; the issue of Li dendrite growth still obstructs their practical application. Herein; …

Constructing Carbon-Encapsulated Nifev-Based Electrocatalysts By Alkoxide-Based Self-Template Method For Oxygen Evolution Reaction, En-Hui Ma, Xu-Po Liu, Tao Shen, De-Li Wang

Journal of Electrochemistry

The development of green and sustainable water-splitting hydrogen production technology is beneficial to reducing the over-reliance on fossil fuels and realizing the strategic goal of "carbon neutral". As one of the half reactions for water splitting, oxygen evolution reaction has suffered the problems of sluggish four-electron transfer process and relatively slow reaction kinetics. Therefore, exploring efficient and stable catalysts for oxygen evolution reaction is of critical importance for water-splitting technology. Metal alkoxides are a series of compounds formed by the coordination function of metal ions with alcohol molecules. Metal alkoxides possess the double advantages of organic materials and inorganic materials, …