Materials Science and Engineering Commons^™

Substrate Interference And Strain In The Second-Harmonic Generation From Mose2 Monolayers, Sudeep Puri, Sneha Patel, Jose Luis Cabellos, Luis Enrique Rosas-Hernandez, Kaitlin Reynolds, Hugh O.H. Churchill, Salvador Barraza-Lopez, Bernardo S. Mendoza, Hiroyuki Nakamura

Physics Faculty Publications and Presentations

Nonlinear optical materials of atomic thickness, such as non-centrosymmetric 2H transition metal dichalcogenide monolayers, have a second-order nonlinear susceptibility (χ⁽²⁾) whose intensity can be tuned by strain. However, whether χ⁽²⁾ is enhanced or reduced by tensile strain is a subject of conflicting reports. Here, we grow high-quality MoSe₂ monolayers under controlled biaxial strain created by two different substrates and study their linear and nonlinear optical responses with a combination of experimental and theoretical approaches. Up to a 15-fold overall enhancement in second-harmonic generation (SHG) intensity is observed from MoSe₂ monolayers grown on SiO₂ when …

Luminescent Coupling In Perovskite Tandem Solar Cells: The Advantages Of Perovskite And Luminescent Coupling In Photovoltaics, Briana Dokken

Senior Seminars and Capstones

Multijunction or tandem solar cells are made of multiple semiconductor light absorbing layers. Having multiple absorber layers in a solar cell allows it to absorb a larger range of the solar spectrum. When electrons recombine (relax to a lower energy state) in the top layer of a tandem solar cell, they can emit luminescent photons that are absorbed by the bottom layer of the cell. This process is called luminescent coupling, and it can be used to enhance the performance of photovoltaic cells. Another strategy to increase solar cell performance is to use perovskite as the absorber layer material. Currently, …

63rd Annual Rocky Mountain Conference On Magnetic Resonance

Rocky Mountain Conference on Magnetic Resonance

Final program, abstracts, and information about the 63rd annual meeting of the Rocky Mountain Conference on Magnetic Resonance, co-endorsed by the Colorado Section of the American Chemical Society and the Society for Applied Spectroscopy. Held in the Copper Conference Center, Copper Mountain, Colorado, August 4-8, 2024.

Surface Patterning On Zirconia Dental Implants Via Laser-Induced Shockwave Imprinting, Inomjon Majidov

Masters Theses & Specialist Projects

Zirconia is rapidly becoming a preferred alternative to titanium in dental applications, primarily due to its aesthetic resemblance to natural teeth. This material’s tooth-like color avoids the aesthetic issues associated with the grey metal tint of titanium implants. Additionally, zirconia is hypoallergenic, making it an ideal choice for patients with metal sensitivities or allergies. Despite these advantages, zirconia generally exhibits lower biocompatibility and osseointegration compared to titanium implants. This study investigates laser-assisted, controlled imprinting technique on zirconia surfaces to enhance these properties. Our research used zirconia pellets, produced from powdered monoclinic zirconia pressed in a pellet press machine. Two methods …

Settingsorder Article Reprints Open Accessarticle A Model To Account For The Effects Of Load Ratio And Hydrogen Pressure On The Fatigue Crack Growth Behavior Of Pressure Vessel Steels, Ashok Saxena, Kip O. Findley

Mechanical Engineering Faculty Publications and Presentations

A phenomenological model for estimating the effects of load ratio R and hydrogen pressure P_H2 on the hydrogen-assisted fatigue crack growth rate (HA-FCGR) behavior in the transient and steady-state regimes of pressure vessel steels is described. The "transient regime" is identified with crack growth within a severely embrittled zone of intense plasticity at the crack tip. The "steady-state" behavior is associated with the crack growing into a region of comparatively lower hydrogen concentration located further away from the crack tip. The model treats the effects of R and P_H2 as being functionally separable. In the transient …

Smart Automatic Modal Hammer Predictor–Corrector Approach For Accurate Excitation Of Dynamical Systems, Mohammad Nasr

Department of Mechanical and Materials Engineering: Dissertations, Theses, and Student Research

This research introduces an innovative solution that revolutionizes the study of linear and nonlinear dynamical systems—a smart automatic modal hammer. With its affordability and intelligent capabilities, this automatic modal hammer becomes an invaluable tool for research and industry, enabling repeatable strikes with precise force control. This system's significance becomes particularly evident when studying nonlinear systems, which heavily rely on the excitation level for their dynamics. By offering a cost-effective design this proposed system proves to be robust in accelerating research on nonlinear dynamics, providing researchers with an efficient and accessible means to delve deeper into these complex systems. The proposed …

Studies Of Exotic Electronic, Optical, And Electrochemical Properties In Nanoparticle Assembly And Graphene, Jay Min Lim

Department of Mechanical and Materials Engineering: Dissertations, Theses, and Student Research

It is well known that exotic properties and phenomena emerge as structural dimensions shrink to nanoscales. We self-assembled one-dimensional chains of gold nanoparticles in solution and quantified the growth process by monitoring the redshift of localized surface plasmon resonance (LSPR). Curiously, the redshift stopped while the chains continued to rearrange as manifested by gradual reduction in the LSPR peak. Using electromagnetic simulations, we quantitatively explained the phenomena as a rapid “addition-polymerization” followed by a sharp transition to “condensation-process.” Next, recognizing the significant electric field enhancement in the interparticle gap, a photoluminescent-active Eu³⁺ ion was used to probe Surface-Enhanced Photoluminescence …

Understanding And Tuning Magnetism In Van Der Waals-Type Metal Thiophosphates, Rabindra Basnet, Jin Hu

Physics Faculty Publications and Presentations

Over the past two decades, significant progress in two-dimensional (2D) materials has invigorated research in condensed matter and material physics in low dimensions. While traditionally studied in three-dimensional systems, magnetism has now been extended to the 2D realm. Recent breakthroughs in 2D magnetism have attracted substantial interest from the scientific community, owing to the stable magnetic order achievable in atomically thin layers of the van der Waals (vdW)-type layered magnetic materials. These advances offer an exciting platform for investigating related phenomena in low dimensions and hold promise for spintronic applications. Consequently, vdW magnetic materials with tunable magnetism have attracted significant …

Modeling Study Of Si3N4 Waveguides On A Sapphire Platform For Photonic Integration Applications, Diandian Zhang, Shui-Qing Yu, Gregory J. Salamo, Richard A. Soref, Wei Du

Electrical Engineering and Computer Science Faculty Publications and Presentations

Sapphire has various applications in photonics due to its broadband transparency, high-contrast index, and chemical and physical stability. Photonics integration on the sapphire platform has been proposed, along with potentially high-performance lasers made of group III–V materials. In parallel with developing active devices for photonics integration applications, in this work, silicon nitride optical waveguides on a sapphire substrate were analyzed using the commercial software Comsol Multiphysics in a spectral window of 800~2400 nm, covering the operating wavelengths of III–V lasers, which could be monolithically or hybridly integrated on the same substrate. A high confinement factor of ~90% near the single-mode …

Laser 3d Printing Of Diamond-Based Composite Materials For Thermal Management Applications, Nada Kraiem

Dissertations and Doctoral Documents, University of Nebraska-Lincoln, 2023–

With the trend towards miniaturization of electrical equipment and the constant increase in power density in semiconductor devices, efficient heat management has become a major concern for researchers. Indeed, this technological evolution imposes increasingly strict constraints in terms of thermal dissipation, necessitating innovative solutions to ensure better durability and reliability of components. In this context, the use of composite materials offering high thermal conductivity (TC) and low coefficient of thermal expansion (CTE) compared to pure metals has become essential to address overheating issues in electronic components.

The utilization of advanced materials such as diamond (D), with exceptional TC and hardness …

Dual Light Emission Of Cssni3-Based Powders Synthesized Via A Mechanochemical Process, Xuan Huang, Xiaobing Tang, Xiyu Wen, Yuebin Charles Lu, Fuqian Yang

Chemical and Materials Engineering Faculty Publications

Lead toxicity has hindered the wide applications of lead halide perovskites in optoelec- tronics and bioimaging. A significant amount of effort has been made to synthesize lead-free halide perovskites as alternatives to lead halide perovskites. In this work, we demonstrate the feasibility of synthesizing CsSnI3-based powders mechanochemically with dual light emissions under ambi- ent conditions from CsI and SnI2 powders. The formed CsSnI3-based powders are divided into CsSnI3-dominated powders and CsSnI3-contained powders. Under the excitation of ultraviolet light of 365 nm in wavelength, the CsSnI3-dominated powders emit green light with a wavelength centered at 540 nm, and the CsSnI3-contained powders …

Mesostructure Reconstruction Of Prepreg Platelet Molded Composite With Artificial Intelligence, Richard Larson

Mechanical & Aerospace Engineering Theses & Dissertations

Prepreg platelet molded composites (PPMC) are long, discontinuous fiber reinforced polymer materials. PPMC are an important subcategory of composite materials as they are processible into geometrically complex structures and can be produced via high-throughput manufacturing processes, however they have higher stiffness and strength as compared to traditional discontinuous fiber reinforced polymers. However, there is inherent randomness in the structure of PPMCs and as such, PPMC parts frequently require per part testing that is cost prohibitive.

Herein, a method using artificial intelligence is proposed as a more cost-effective method of inspecting PPMC parts. Different artificial intelligence (AI) architectures are explored to …

Understanding And Tuning Magnetism In Layered Ising-Type Antiferromagnet Fepse3 For Potential 2d Magnet, Rabindra Basnet, Taksh Patel, Jian Wang, Dinesh Upreti, Santosh Karki Chhetri, Gokul Acharya, Md Rafique Un Nabi, Joshua Sakon, Jin Hu

Chemistry & Biochemistry Faculty Publications and Presentations

Recent developments in 2D magnetic materials have motivated the search for new van der Waals magnetic materials, especially Ising-type magnets with strong magnetic anisotropy. Fe-based MPX₃ (M = transition metal, X = chalcogen) compounds such as FePS₃ and FePSe₃ both exhibit an Ising-type magnetic order, but FePSe₃ receives much less attention compared to FePS₃. This work focuses on establishing the strategy to engineer magnetic anisotropy and exchange interactions in this less-explored compound. Through chalcogen and metal substitutions, the magnetic anisotropy is found to be immune against S substitution for Se whereas …

Spin And Charge Transport In Metallic Ferrimagnets And Disordered Magnetic Oxides, Leopoldo A. Hernandez

Electronic Theses and Dissertations

Recent efforts have been exploring the use of thin film synthetic ferrimagnets and disordered magnetic oxides for applications in spintronic devices. Due to the antiferromagnetic exchange interaction, ferrimagnetic materials offer the ultrafast dynamics of the antiferromagnetic exchange, with a net magnetization that can be influenced externally. With two, or more, competing ferromagnet sublattices, interesting properties arise that depend on the final magnetic landscape after growth of the material and it’s inherent magnetic anisotropy energies. Properties such as magnetic compensation temperatures, and perpendicular magnetic anisotropy are attractive for applications in spintronic memory and logic devices, some already being implemented in MRAM …

A Novel Method May Reveal Bulk Metallic Glass Compressive Ductility Trends In High Data Rate Nanoindentation, Jordan J. Sickle, Wesley H. Higgins, Wendelin Wright, George M. Pharr, Karin A. Dahmen

Faculty Journal Articles

Recent methods allow novel amorphous alloy compositions to be rapidly manufactured at small scale; however, obtaining materials properties such as compressive ductility from these smaller specimens has remained a challenge. Here, we suggest a potential high-throughput nanoindentation method that may be able to rapidly characterize the relative compressive ductility between these alloys based on their serration characteristics. The properties of emergent serrations, when interpreted in a simple micromechanical stress relaxation model, may order these materials by their compressive plastic strain to failure. These results are consistent with the ordering obtained from compressed specimens as well as with model simulations, suggesting …

Photodegradation Of Microplastics Through Nanomaterials: Insights Into Photocatalysts Modification And Detailed Mechanisms, Yiting Xiao, Yang Tian, Wenbo Xu, Jun Zhu

Biological and Agricultural Engineering Faculty Publications and Presentations

Microplastics (MPs) pose a profound environmental challenge, impacting ecosystems and human health through mechanisms such as bioaccumulation and ecosystem contamination. While traditional water treatment methods can partially remove microplastics, their limitations highlight the need for innovative green approaches like photodegradation to ensure more effective and sustainable removal. This review explores the potential of nanomaterial-enhanced photocatalysts in addressing this issue. Utilizing their unique properties like large surface area and tunable bandgap, nanomaterials significantly improve degradation efficiency. Different strategies for photocatalyst modification to improve photocatalytic performance are thoroughly summarized, with a particular emphasis on element doping and heterojunction construction. Furthermore, this review …

Settingsorder Article Reprints Open Accesseditor’S Choicearticle Exploring The Impact Of Spray Process Parameters On Graphite Coatings: Morphology, Thickness, And Tribological Properties, Adedoyin Abe, Josue A. Goss, Min Zou

Mechanical Engineering Faculty Publications and Presentations

This study explores, through a full factorial experimental design, the effects of graphite concentration and spray flow rate on the morphology, thickness, and tribological performance of graphite coatings for potential tribological applications. Coatings were applied to rough substrates using varying concentrations and flow rates, followed by analysis of their morphological characteristics, roughness, thickness, coefficient of friction (COF), and wear behavior. The results revealed distinct differences in the coating morphology based on flow rate, with low-flow-rate coatings exhibiting a porous structure and higher roughness, while high-flow-rate coatings displayed denser structures with lower roughness. A COF as low as 0.09 was achieved, …

Combinatorial Studies Of Noble Metal Catalysts For Carbon Utilization, Natalie Leong Page

Theses and Dissertations

Electrocatalysts demonstrate significant promise for sustainable processes like carbon capture and generating recycled carbon fuels which are needed to achieve net zero carbon emissions. However, the commercialization of these processes is limited by several factors, one of which is the high cost of catalysts. The discovery and development of cheaper alternatives has been difficult due to constraints in experimental methodologies, scalability limitations, and a lack of understanding of reaction mechanisms. Within this dissertation is the development of a novel scanning electrochemical system and its implementation for high-throughput data generation from combinatorially sputtered material libraries. Combinatorial Pd-Au alloys were investigated for …

A Computational Investigation Of Wood Selection For Acoustic Guitar, Jonah Osterhus

Senior Honors Theses

The acoustic guitar is a stringed instrument, often made of wood, that transduces vibrational energy of steel strings into coupled vibrations of the wood and acoustic pressure waves in the air. Variations in wood selection and instrument geometry have been shown to affect the timbre of the acoustic guitar. Computational methods were utilized to investigate the impact of material properties on acoustic performance. Sitka spruce was deemed the most suitable wood for guitar soundboards due to its acoustic characteristics, strength, and uniform aesthetic. Mahogany was deemed to be the best wood for the back and sides of the guitar body …

Effects Of Ti Addition On The Characteristics Of Al-10zn-6mg-2si/Zro2 Composites Produced By Squeeze Casting, Qesha Diva Prameshvara, Pipin Indah Lestari, Bondan Tiara Sofyan

Journal of Materials Exploration and Findings

Metal matrix composite (MMC) with 7xxx aluminum matrix is potential for ballistic applications due to the combination of strength, toughness, and light weight. Previous study successfully produced aluminum-based composites with SiC particles which were able to stop type III bullet, however cracks remained on back of the plate. Therefore, in this research, SiC was replaced by zirconia (ZrO₂) due to its high fracture toughness. Ti-B grain refiner was added to further improve toughness through grain boundary strengthening mechanism. This research developed 5 vol.% ZrO₂ strengthened Al-10Zn-6Mg-2Si composite with addition of Al-5Ti-1B grain refiner produced through squeeze casting …

Integration Of The Ashby Technique And Pahl-Beitz Quantitative Ranking For Railway Axle Material Selection, Helya Chafshoh Nafisah, Jaka Fajar Fatriansyah, Siti Norasmah Surip

Journal of Materials Exploration and Findings

Railway axle serves as a vital connection between the train's wheels and its body. However, cyclic loading and high speed can induce fatigue in railway axle, which potentially leads to damage human safety. Therefore, it is important to find materials that have good mechanical properties with the lowest weight and cost. In this paper, a comprehensive method using Ashby chart has been performed to select candidate materials of railway axle. The methods begin with analyzing function by determining the problem, objective function, and constraints. After that, the results obtained are ranked using Pahl and Beitz quantitative weighting method. The results …

Analysis Of The Effect Of Different Surface Preparation Methods On Corrosion Resistance And Adhesion Strength Of Astm A36 Steel Substrate With Surface Tolerant Epoxy Paint As Coating Material, Irwan Wijaya Santoso, Daffa Aqila, Rini Riastuti, Rizal Tresna Ramadhani

Journal of Materials Exploration and Findings

In the industrial world, to extend the service life of materials, protection methods are carried out to slow down the material's corrosion rate. The protection method that is often used is the coating method. The coating method is a protection method by coating the substrate material using a coating material to prevent contact between the substrate material and the environment. In this research, the substrate material used is ASTM A36 steel and the coating material used is Surface Tolerant Epoxy paint. The independent variable used in this study lies in the surface preparation method which consists of: solvent cleaning, hand …

A Comprehensive Investigation Of The Influence Of Geometric Structure On The Shape Memory Performance Of Nafion, Jade Thomas

Physics Undergraduate Honors Theses

While perfluorosulfonic acid (PFSA) membranes have primarily been used in fuel cells due to their chemical, thermal, and mechanical stability, one PFSA, Nafion, boasts two unique characteristics: a broad glass transition (~55 °C to 130 °C) and a temperature-persistent electrostatic network. The combination of these two characteristics endows Nafion with exceptional shape memory properties – the ability of a material to morph and transform into pre-programmed shapes when exposed to an external stimulus – with enhanced permanent shape memorization, and a potentially near-infinite number of temporary shape memorization. This study focused on expanding the base of knowledge surrounding Nafion’s shape …

The Analysis Of Mechanical Exfoliation Of Graphene For Various Fabrication And Automation Techniques, Lance Yarbrough

Physics Undergraduate Honors Theses

Mechanical Exfoliation

A Comprehensive Investigation Of The Influence Of Geometric Structure On The Shape Memory Performance Of Nafion, Jade Thomas

Mechanical Engineering Undergraduate Honors Theses

While perfluorosulfonic acid (PFSA) membranes have primarily been used in fuel cells due to their chemical, thermal, and mechanical stability, one PFSA, Nafion, boasts two unique characteristics: a broad glass transition (~55 °C to 130 °C) and a temperature-persistent electrostatic network. The combination of these two characteristics endows Nafion with exceptional shape memory properties – the ability of a material to morph and transform into pre-programmed shapes when exposed to an external stimulus – with enhanced permanent shape memorization, and a potentially near-infinite number of temporary shape memorization. This study focused on expanding the base of knowledge surrounding Nafion’s shape …

Encapsulated 2d Materials And The Potential For 1d Electrical Contacts, Sarah Wittenburg

Physics Undergraduate Honors Theses

The utilization of two-dimensional materials and heterostructures, particularly graphene and hexagonal boron nitride, have garnered significant attention in the realm of nanoelectronics due to their unique properties and versatile functionalities. This study focuses on the synthesis and fabrication processes of monolayer graphene encapsulated between layers of hBN, aiming to explore the potential of these heterostructures for various electronic applications. The encapsulation of graphene within hBN layers not only enhances device performance but also shields graphene from environmental contaminants, ensuring long-term stability. Experimental techniques, including mechanical exfoliation and stamp-assisted transfer, are employed to construct three-layer stacks comprising hBN-graphene-hBN. The fabrication process …

Investigation Of Domain Formation During Phase Separation In A Mixture Of Flexible And Rigid Biopolymers, Steven Huntley

All Theses

Complex fluids and heterogenous mixtures composed of multiple types of polymers are found throughout industrial and biological fluid systems. For example, extrusion based additive manufacturing systems pass dense mixtures of polymers through the extrusion heads to deposit composite polymeric materials. In cells, active and complex mixtures of biopolymers self-organize into assemblies that perform critical physiological functions.

Polymers in dense solutions undergo phase separation as a result of differences in physiochemical properties. A few examples of these properties include charge, structure, rigidity, and hydrophobicity. We observe the formation of polymer domains composed of rigid and a flexible biopolymer species that phase …

The Analysis Of Mechanical Exfoliation Of Graphene For Various Fabrication And Automation Techniques, Lance Yarbrough

Mechanical Engineering Undergraduate Honors Theses

Mechanical Exfoliation of Graphene is an often-overlooked portion of the fabrication of quantum devices, and to create more devices quickly, optimizing this process to generate better flakes is critical. In addition, it would be valuable to simulate test pulls quickly, to gain insight on flake quality of various materials and exfoliation conditions. Physical pulls of graphene at various temperatures, pull forces, and pull repetitions were analyzed and compared to the results of ANSYS simulations, solved for similar results. Using ANSYS’ ability to predict trends in exfoliations, flake thickness and coverage using stress and deflection analyses were investigated. Generally, both strongly …

Numerical Simulation Of Laser Induced Elastic Waves In Response To Short And Ultrashort Laser Pulses., Alireza Zarei

All Dissertations

In an era of intensified market competition, the demand for cost-effective, high-quality, high-performance, and reliable products continues to rise. Meeting this demand necessitates the mass production of premium products through the integration of cutting-edge technologies and advanced materials while ensuring their integrity and safety. In this context, Nondestructive Testing (NDT) techniques emerge as indispensable tools for guaranteeing the integrity, reliability, and safety of products across diverse industries.

Various NDT techniques, including ultrasonic testing, computed tomography, thermography, and acoustic emissions, have long served as cornerstones for inspecting materials and structures. Among these, ultrasonic testing stands out as the most prevalent method, …

Drag Reduction In Channel Flow Configurations For Laminar And Turbulent Flow Past Superhydrophobic Surfaces, Henry Louis Ems

Dissertations and Doctoral Documents, University of Nebraska-Lincoln, 2023–

In this work, we present friction drag reduction in minichannel laminar flow past superhydrophobic metallic surfaces. Femtosecond laser surface processing (FLSP), a one-step scalable method, was used to create permanent microscale and nanoscale structures on 316 stainless steel plates. The resulting superhydrophilic plates were covered by tall (215 μm) or short (27 μm) structures. The FLSP plates were then transitioned to superhydrophobic by evaporative deposition of a fluorinated silane, a low surface energy coating. Using purified water, the friction factor was obtained by measuring pressure drop along a minichannel with a rectangular cross section for flow rates corresponding …