Materials Science and Engineering Commons^™

Key Construction Technologies For Single-Tower Rotating-Cable Suspension Bridges With Steel Truss Girders In Mountainous Regions, Gao Shuangjian, Zhang Weichao, Fu Lihong, Zhu Shuo

Journal of China & Foreign Highway

Given the problems of narrow construction sites, difficult construction organization, and high safety and quality risks faced in the construction of bridges in steep canyon regions of mountainous areas, this paper carried out research on key technologies for bridge construction in mountainous areas based on the Yellow River Three Gorges Bridge of the Jiyuan‒Xin’an Expressway. For the excavation of deep and large anchorage foundation pits in mountainous areas, a technical scheme of “loosening controlled blasting combined mainly with mechanical excavation and supplemented by manual excavation” was adopted. As this project is a single-tower single-span ground-anchored rotating-cable suspension bridge, the technologies …

Mix Proportion Design Of Tunnel Shotcrete Based On Diorite Manufactured Sand, Song Funing, Wang Zegang, Liu Naifei, Song Zhanping

Journal of China & Foreign Highway

Tunnel construction produces a large amount of waste slag, which cannot be effectively utilized due to various factors. By using tunnel slag to prepare manufactured sand to replace natural sand, resources can be saved; costs can be reduced, and the environment can be protected. Based on the Xi’an‒Shiyan high-speed railway project, the physical and mechanical properties of diorite along the tunnel were tested; the physical properties and concrete performance of manufactured sand and natural sand were comparatively studied, and the effects of water-binder ratio and sand ratio on the performance of shotcrete were analyzed by designing multiple sets of mix …

Surface Deep Well Dewatering Methods For Tertiary Water-Rich Semi-Diagenetic Section Of Wangjiazhai Tunnel, Liu Chengwen, Liu Gang, Xu Hua, Wei Meng

Journal of China & Foreign Highway

The tertiary semi-diagenetic sandstone of the Wangjiazhai Tunnel on the Yunnan Linqing Expressway is characterized by loose structure, low diagenetic strength, and poor cementation. The geological disasters such as collapse, water gushing, and mud bursting are very easy to happen when the tunnel passes through the water-rich section. With the surface deep well dewatering of the tertiary water-rich semi-diagenetic section of Wangjiazhai Tunnel as an example, the surface deep well dewatering methods and key parameters for tunnel crossing the tertiary water-rich semi-diagenetic section were discussed. Based on the single well surface dewatering test, the groundwater level and strata permeability of …

Ventilation Design And On-Site Effect Testing For Construction Of Multiple Working Faces In Tianshan Shengli Tunnel, Xiong Ziyi, Jia Haiyang, Suo Feiyu, Liu Weiwei, Chen Jianxun, Yang Ziyao, Wang Heqi

Journal of China & Foreign Highway

To explore the ventilation optimization and energy saving issues in the construction of multiple working faces in extra-long highway tunnels, the air volumes required for a single working face under drilling and blasting construction conditions and TBM tunneling conditions were determined respectively based on theoretical calculations. Combined with the tunnel construction organization scheme, two ventilation schemes were proposed, and they were compared and selected according to the configured power of axial fans. Based on the recommended scheme, the layout scheme of pollutant-discharging jet fans was designed, and its feasibility was finally verified by on-site measurements of pollutant concentrations. The research …

A Prediction Method For Scale Of Karst Cave Water Inrush And Mud Outburst Based On Comprehensive Advanced Geological Prediction, Yang Weilin, Xiao Huabo, Meng Lubo, Zhang Caihong, Chen Weidong, Wang Hao

Journal of China & Foreign Highway

To improve the accuracy of water inrush and mud outburst disaster prediction during tunnel construction through karst caves, a method of first forecasting the unfavorable geological conditions of karst caves and subsequently predicting water inrush and mud outburst geological disasters was proposed in this paper. First, a karst cave advanced prediction model based on the polynomial naive Bayes algorithm was established to predict the scale grade of karst caves. Secondly, taking the scale prediction results of karst caves as the input condition for water inrush and mud outburst, a support vector machine (SVM) grade prediction model for karst cave water …

Research On Recognition Of Highway Toll Vehicles Based On Dual-View Feature Fusion Network, Xiao Qiang, Chen Xinjia, Chen Jing, Zhao Bin, Yan Kaifeng, Ding Hongwei

Journal of China & Foreign Highway

To solve the practical problems in vehicle type classification on toll roads, a deep learning network based on dual-view feature fusion, named ETCLNet, was proposed in this paper. A dual-branch architecture was adopted by the network to extract the features of vehicle head and side body images, respectively, and combined with an innovatively designed multi-scale feature extraction module, namely IPFE, and an adaptive weighting-based bilinear feature fusion (AWBF) mechanism, efficient and fine-grained vehicle feature representation was achieved. Through the design of parallel multi-scale convolutions and residual connections, the problem of gradient vanishing was effectively alleviated, and the adaptability to complex …

Analysis Of Traffic Congestion Patterns In Continuous Bottleneck Construction Zones Of Highways Under Mixed Traffic Of Passenger And Freight Vehicles, Han Hailong, Song Tailong, Ma Tianyong, Fan Zhaodong, Chen Zhexin, Chen Liang

Journal of China & Foreign Highway

To investigate the traffic congestion pattern changes in continuous bottleneck sections of highway construction zones under mixed passenger and freight traffic conditions, the spatio-temporal evolution laws of vehicle speed and lane-changing trajectory distribution in construction sections with successive lane-narrowing bottlenecks were studied. Based on measured highway data, traffic flow simulation parameters were calibrated using a genetic algorithm. By taking traffic volume and the proportion of passenger and freight vehicles as entry points, a traffic simulation experiment for continuous bottleneck construction zones under multi-factor coupling effects was constructed, and the spatio-temporal variation characteristics of speed and lane-changing trajectory distribution in the …

Analysis Of Temperature Field Of Steel Box Girders During Steam Curing Construction Process Of Steel-Uhpc Composite Bridge Decks, Wu Shang, Zhang Yongjian

Journal of China & Foreign Highway

To clarify the influence of high-temperature steam curing of steel-ultra-high performance concrete (UHPC) lightweight composite bridge deck paving on the temperature field of the steel box girder, taking a certain bridge in Hunan Province as an example, finite element numerical simulation and actual bridge testing were conducted on the temperature field of the steel box girder during the high-temperature steam curing process of the bridge deck paving. The numerical calculations were generally consistent with the test results. The analysis results indicate that under the superimposed effect of solar radiation heating and high-temperature steam curing heating, the maximum temperature of the …

Road Design Methods For Brt Projects Based On French Standard System : A Case Study Of A Project In West Africa, Wang Meng, Wu Cheng

Journal of China & Foreign Highway

With the continuous advancement of China ’s “Belt and Road Initiative”, Chinese enterprises have become increasingly involved in international engineering markets, undertaking numerous transportation infrastructure projects, particularly in Africa and Southeast Asia. However, international engineering projects commonly face the challenge of inconsistent design standard systems across different countries, posing significant difficulties for Chinese enterprises during project implementation. To address this issue, the differences in BRT road design under Chinese and French standards were focused on in this study, and their respective design philosophies and methods were analyzed. Taking a BRT project in a West African country as an example, field …

Material Point Method Simulation Of Soil Landslide Considering Interface Friction Effect, Zuo Zhipeng, Hu Shengliang, Li Maowen, Tong Chenxi, Li Haichao

Journal of China & Foreign Highway

During the high-speed and long-runout sliding failure process of large landslides, severe friction and heat generation in the sliding zone induce an interface friction effect between the debris flow and the bedrock, influencing the final accumulation morphology of the landslide. In this paper, a two-dimensional landslide model of the Yangbaodi landslide in Shenzhen was established using the material point method. A contact algorithm was introduced through a multi-background grid method to conduct numerical simulations on the initiation, sliding, and accumulation processes of the landslide. The results show that after initiation, the landslide moves over a long distance in a flow-like …

Stratified Multi-Well Pumping Tests And Back-Analysis Of Hydraulic Conductivity In Ultra-Deep Circular Foundation Pits, Luo Renkun, Wang Jie

Journal of China & Foreign Highway

Dewatering prior to foundation pit excavation is a critical measure to prevent engineering hazards such as slope instability at the pit top, seepage around the pit, and bottom heave. As a key parameter in dewatering design, hydraulic conductivity directly influences the risk control in foundation pit engineering. Based on the east anchor foundation pit project of the Shiziyang Passageway, single-well pumping tests and stratified multi-well pumping tests were conducted. The water level variations in the internal dewatering wells and the external observation wells were monitored in stages. Accordingly, a finite difference numerical model for the pumping tests was established. The …

Research On Mechanical Properties And Particle Breakage Of Construction Solid Waste Concrete Under Cyclic Loading, Li Xuejian, Song Yang, Dong Chenxi, Li Shengkai, Li Wangyuan

Journal of China & Foreign Highway

To investigate the mechanical properties and particle breakage effect of construction solid waste, a series of static and dynamic direct shear tests were carried out using a dynamic interface shear tester. Different coarse particle contents (40%, 50%, and 60%), amplitudes (45 kPa, 60 kPa, and 75 kPa), and frequencies (0.5 Hz, 1 Hz, and 2 Hz) were used as variables, and the variation rules of shear stress‒shear displacement curves, shear strength parameters, and particle breakage under three normal stresses (50 kPa, 100 kPa, and 150 kPa) were analyzed. The results indicate that under the same initial normal stress, with the …

Study On Mechanical Properties Of Ultra-High Performance Concrete With Granite Manufactured Sand After Heating And Cooling Treatment, Li Gang, Zhou Feilong, Lu Qiuju, Du Kun, Liu Kai

Journal of China & Foreign Highway

Due to the frequent occurrence of building fires, the mechanical properties of concrete, as the most widely used construction material, are severely challenged under high temperatures. To explore the effect of granite manufactured sand content on the performance of ultra-high performance concrete (UHPC) after heating and cooling treatment, three types of UHPC specimens with different manufactured sand contents (0, 50%, and 100%) were prepared in this study. Then, the effects of manufactured sand content, heating temperature, and cooling regime on the P-wave velocity and uniaxial compressive strength of UHPC were obtained through experiments. The results indicate that the P-wave velocity …

Characteristic Analysis Of Detection Profiles For Internal Moisture Content Of Asphalt Pavements Based On Ground Penetrating Radar, Yang Li, He Pingping, Liu Weizhen, Fu An

Journal of China & Foreign Highway

As a novel non-destructive testing method for roads, ground penetrating radar (GPR) can effectively prevent road water damage by regularly detecting the internal moisture condition of roads. However, when the moisture data of GPR are analyzed, the moisture conditions obtained by relying solely on the analysis of a single profile characteristic may be misjudged. To improve the accuracy and reliability of GPR in detecting the internal moisture content of pavements, focus was placed on the time-frequency domain analysis of GPR moisture content detection profiles in this paper. Simulation tests were conducted, and the influencing factors and results of moisture detection …

Research On Mechanical Properties Of Concrete At High Temperatures Based On Machine Learning, Liu Junhua, Liu Bin, Cao Haifeng, Liu Zhiguang, Li Zhiyong

Journal of China & Foreign Highway

Structural safety is directly affected by the mechanical properties of concrete at high temperatures. Firstly, based on the existing compression and tension test data of concrete at high temperatures, the Abaqus finite element software was adopted for numerical simulation reproduction, and the reliability of the simulation method was verified. Secondly, by simulating the uniaxial tension-compression and confining pressure tests of normal concrete with different strength grades under high temperatures of 20‒800 ℃, the influence rules of temperature on the compressive strength, splitting tensile strength, elastic modulus, and stress ‒ strain relationship of concrete were elucidated. Finally, based on three commonly …

Research On Dic Monitoring Of Dynamic Deflection And Damage Identification Method For Small And Medium-Span Bridges, Wang Yong, Li Derui, Tang Haotian, Yan Xingfei, Cheng Bin

Journal of China & Foreign Highway

A large number of built small and medium-span bridges in China are facing the problem of increasingly degrading structural performance. Therefore, it is of great significance to carry out lightweight intelligent monitoring and realize damage identification and early warning, so as to ensure the safe operation of these bridges. For typical small and medium-span simply supported beam bridges, a damage analysis method based on measured dynamic deflection data was established by combining the influence line theory and mechanical constitutive equations. Furthermore, based on the high-precision monitoring algorithm and instruments of digital image correlation (DIC), the real-time dynamic deflection data of …

Comparative Study On Pouring Timing Of Sealing Hinge Concrete For Concrete-Filled Steel Tube Arch Bridge, Wang Xiaoliang, Fu Kaige, Zhang Song, Wang Zhongqiang, Chen Zhuoyi

Journal of China & Foreign Highway

The pouring timing of sealing hinge concrete for concrete-filled steel tube arch bridges directly affects the construction duration and the stress state of arch ribs. To clarify the structural response differences at different pouring timings, the Beiliuhe Extra-large Bridge on the Pingxi ‒ Cenxi Expressway in Guangxi Province was taken as the engineering background in this paper. A finite element model was established using Midas Civil, and the following four pouring timings of sealing hinge concrete were comparatively analyzed: immediately after the butt welding of sealing hinge steel pipes; after the closure of arch ribs and before the pouring of …

Study On Calculation Method For Incremental Launching Based On Nonlinear Analysis, Mo Shanfeng, Huang Cailiang, Qin Hui

Journal of China & Foreign Highway

In view of the shortcomings of traditional incremental launching calculation methods and the assembly construction control of incremental launching beams, an incremental launching calculation method based on nonlinear analysis was proposed in this paper. This method could truly simulate the running state where the incremental launching pier remains stationary, and the beam moves forward. The assembly alignment of all segments of the beam and the real alignment of the beam under specified working conditions could be directly output. The prefabricated alignment of the main beam (i.e., unstressed alignment) did not need to be consistent with the slide alignment. When the …

Summary And Prospect Of Typical Diseases In Energy Transport Channels In Winter Cold Regions Over Past 20 Years, Jia Qinlong, Hou Zhongfei, Yin Yanping

Journal of China & Foreign Highway

To investigate the typical disease characteristics of energy transport channels in winter cold regions and guide the design for extending road service life, the causes of diseases such as pavement reflective cracks, continuous potholes on bridge decks, and failures of bridge drainage systems were analyzed based on the 20-year operation data of a 531 km in-service expressway in the coal energy region of northern Shaanxi. The research results indicate that when the asphalt pavement thickness reaches 22 cm, the reflective crack spacing of the expressway operated for 15 years can be controlled to over 50 m. Basically, no base layer …

Lafe0.925ti0.075o3 Perovskite Coated With Ethyl Cellulose: A High-Stability, Low-Hysteresis Platform For Advanced Humidity Sensing, Akhmad Futukhillah Fataba Alaih, Djoko Triyono, Rifqi Almusawi Rafsanjani

Makara Journal of Science

Humidity sensors are pivotal in numerous sectors, such as environmental monitoring, industrial automation, and health-care. This study presents the fabrication and detailed evaluation of an advanced humidity sensor using ethyl cellulose (EC)-coated LaFe_0.925Ti_0.075O₃ (LFTO) perovskite nanoparticles synthesized via the sol-gel method. The LFTO nanopar-ticles exhibited a mesoporous structure with an enhanced surface area, which significantly improved their moisture adsorption capabilities. The innovative application of EC coating addresses critical substrate adhesion issues, enhancing mechanical stability without compromising sensor sensitivity. Comprehensive performance evaluations revealed minimal hysteresis (

Rheological Protocol To Assess And Optimize Latex Coagulation Dynamics For The Thin Glove Coagulant Dipping Process, Monday U. Okoronkwo, Kok Kong Ng, Wolfram Franke, Gaurav Sant

Chemical and Biochemical Engineering Faculty Research & Creative Works

Many products that directly impact the quality of human life today — gloves, catheters, condoms, and baby bottle teats — are made through the latex-dipping technology. While a variety of methods have been developed – e.g., particle counting, turbidimetry, microscopy, and light scattering – which are suitable for studying the coagulation of latex at very low concentrations, much less work has focused on methods suitable for in-situ characterization of latex coagulation in concentrated solutions (e.g., as relevant to the dipping process). This paper presents a process-relevant rheological protocol for assessing and optimizing latex coagulation dynamics for the thin glove coagulant …

Tuning Ion Mobility And Molecular Confinement In High-Performance Polymer Electrolytes For Energy Storage, Ezzeldien Yousef Muhammed Yousef

Theses and Dissertations

This research addresses the critical energy density limitations of aqueous supercapacitors, which are traditionally constrained by the narrow electrochemical stability window (ESW) of water 1.23 V. By employing two distinct molecular engineering strategies, this study developed high-performance electrolyte systems that significantly extend voltage stability and thermal resilience.

The first system, CsBr@PAM/HA, utilizes a polyacrylamide and hyaluronic acid hydrogel matrix. This system exploits the chaotropic nature of Cs⁺ ions to disrupt the aqueous hydrogen-bonding network, enhancing ionic conductivity to 104 mS cm^-1. Through systematic salt screening, CsBr was identified as the optimal electrolyte, enabling a stable 2.0 V …

Engineering Nanoelectrocatalytic Systems For Co2 And Nitrate Conversion Into Value-Added Chemicals, Abdelrahman Mohamed Abdelmohsen

Theses and Dissertations

The thesis addresses two major related environmental crises: nitrate pollution of water systems and the ever-increasing levels of atmospheric carbon dioxide. Both challenges are closely linked to anthropogenic disturbance of nitrogen and carbon cycles and require sustainable, energy efficient mitigation techniques. In this study, we investigate electrochemical conversion routes as a unified approach to convert these pollutants into value-added compounds: ammonia (NH3) via nitrate reduction (NO3-RR) and ethylene (C2H4) via carbon dioxide reduction (CO2RR). The first half of this work deals with the design and engineering of Cu-Zn alloy electrocatalysts for efficient NO3-RR. Tuning the alloy composition and surface nanostructure …

Rapid-Prototyping Nanofabrication: Lcd-Based Projection Lithography And Physical Vapor Deposition, Sabeel Saleem Mohammmed

University Honors Theses

The semiconductor industry's continued growth, driven in large part by demand for artificial intelligence hardware, has highlighted the need for greater workforce development in regions adjacent to major fabrication centers like Oregon's Silicon Forest. This capstone project lays the groundwork for a small scale and student led semiconductor fabrication lab at Portland State University by demonstrating two of the core steps in chip manufacturing: photolithography and thin film deposition. Rather than relying on conventional fixed reticles, this work explores a unique, low cost approach to patterning that uses an ultraviolet-compatible liquid crystal display (LCD) as a programmable reticle, allowing arbitrary …

Investigation Of Portland Limestone Cement Blended With Biochar From Downdraft Gasification: Hydration Kinetics, Microstructure, Rheology, And Performance Mechanisms, Ugochukwu Ewuzie, Paul C. Ani, Abdulkareem O. Yusuf, Joseph D. Smith, Monday Uchenna Okoronkwo

Chemical and Biochemical Engineering Faculty Research & Creative Works

The widespread adoption of Portland Limestone Cement (PLC) in U.S. concrete production has necessitated research into commercially available supplementary cementitious materials (SCMs) for formulating high-performance, low-carbon blended binders with PLC. This study investigated the influence of biochar (BC) in biochar-PLC composites (CBCs), focusing on hydration kinetics, microstructure, rheology, pore-solution chemistry, compressive strength, and the underlying mechanisms. Biochar was produced via downdraft gasification at 850 °C and incorporated into PLC at 5, 7, and 10% substitution by mass. Isothermal calorimetry and hydration data modeled using the Knudsen equation revealed that BC retarded early hydration but improved hydration degree and later-age heat …

Characterization Of The Thermally Driven Red Hue Effect In Coated And Uncoated Concrete Systems: Implications For Post-Fire Assessment In Wildland Urban Interface Communities, Juan C. Palominos Jr

Master's Theses

The increasing frequency and intensity of Wildland-Urban Interface (WUI) wildfires, such as the destructive 2025 Pacific Palisades Fire that destroyed over 6,000 structures, have underscored the urgent need for rapid post-fire safety assessment methodologies. This study sought to quantitatively characterize the Thermally Driven Red Hue Effect (TRHE), a unique, irreversible color shift observed in architectural coatings and concrete substrates, to determine its reliability as a permanent visual record of thermal exposure. Concrete substrates were formulated with three distinct coarse aggregates: gold granite (14.7% Fe), red cinder (22.4% Fe), and green rock (33.6% Fe) and coated with a 20 PVC waterborne …

Fairlinked: Data Fairification Tools For Materials Data Science, Van D. Tran, Brandon Lee, Ritika Lamba, Henry Dirks, Quynh D. Tran, Balashanmuga Priyan Rajamohan, Ozan Dernek, Laura S. Bruckman, Yinghui Wu, Erika I. Barcelos, Roger H. French

Student Scholarship

FAIRLinked is a software package created to support the FAIRification of materials science data, ensuring proper alignment with FAIR principles: Findable, Accessible, Interoperable, and Reusable. It is built to be compatible with MDS-Onto, an ontology designed to capture the semantics of various types of materials data, enabling integration and sharing across different research workflows. The package is subdivided into three subpackages: InterfaceMDS, RDFTableConversion, and QBWorkflow. The first subpackage, InterfaceMDS allows users to search for terms using either string search or various filters, explore different domains and subdomains, and add terms to MDS-Onto. RDFTableConversion is used for serialization and deserialization of …

Quantum And Conventional Informatics Studies Of Synthesis Energetics And Defect Formation In Nitride Crystal Epitaxy, Andrew Steven Messecar

Dissertations

Machine learning is a valuable approach for the processing and analysis of complex information. By estimating relationships from recorded data, machine learning methodologies can be effective strategies for pattern recognition, enabling investigations and technological applications based thereon. The potential for improved understanding of high-dimensional data has drawn interest towards machine learning from across the sciences, including the research and development of new and improved material systems. In the context of experimental materials research, much of the reported efforts to incorporate machine learning into conventional practice have been primarily focused on either the enhanced analysis of characterization experiment data or the …

Thermally Induced Color Changes In Iron Oxide Pigments Used In Architectural Coatings, Han Diep

Master's Theses

The 2025 Palisades Fire was one of the most destructive wildfires in the history of Los Angeles, destroying thousands of structures and severely impacting the communities after. This widespread destruction demonstrated an urgent need for more effective wildfire prevention strategies. Architectural coatings do not only provide aesthetics and protection against environmental conditions but can also function as a thermal indicator when a fire breaks out. This study examines the thermally induced color transformation of iron oxide pigments, commonly used in earthtone paint, to provide information relevant to CAL FIRE for improved analysis of wildland-urban interface (WUI) fire behavior and mitigation …

A Generative Ai-Driven Computational Framework For Industry-Scale Discovery Of Novel Battery Materials, Joy Datta

Dissertations

The growing demand for sustainable, high-energy-density electrochemical storage has motivated the exploration of multivalent-ion batteries based on earth-abundant elements such as aluminum, calcium, magnesium, and zinc. While multivalent charge carriers offer higher theoretical energy density than lithium, their practical deployment is hindered by sluggish ion transport, strong ion-host interactions, and structural degradation of electrode materials. Identifying host materials that can reversibly accommodate multivalent ions while maintaining structural integrity remains a fundamental challenge. The dissertation develops a scalable, end-to-end computational framework that integrates density functional theory (DFT), machine learning (ML), and generative artificial intelligence (GenAI) to accelerate the discovery of next-generation …