Materials Science and Engineering Commons^™

A Review Of Gallium And Germanium Recovery From Industrial Solid Residues, Ernest V. Oteng, Marthias Silwamba, Lana Alagha, Alex Luyima

Mining Engineering Faculty Research & Creative Works

The global demand for critical elements such as gallium (Ga) and germanium (Ge), and the shift toward circular mining has accelerated the development of new extraction and recovery processing these metals from industrial solid residues. This transition is driven by a substantial surge in demand for advanced technologies and the depletion of primary ore. Consequently, industrial solid residues, particularly zinc processing residues, smelter slags, flue dusts, and coal fly ash, are emerging as viable alternative sources. These residues incorporate Ga and Ge through isomorphic substitution in phases such as ferrites, silicates, and glassy aluminosilicates, and are enriched by industrial processes, …

Neural Network Driven By Electrochemical Performance Data For Predicting The Discharge Termination Time Of Seawater Electrolyte-Based Metal-Air Batteries, Peng-Peng Shen, Yi-Chi Pan, Yu-Rong Liu, Lu-Dan Zhang, Ning Niu, Guan-Jun Wang, De-Kun Yang, Xin-Long Tian, Peng Rao

Journal of Electrochemistry

Seawater electrolyte-based metal-air batteries exhibit great promise for marine energy supply systems. However, conventional statistical analysis methods, though applicable to seawater metal-air battery lifetime prediction, have inherent limitations of insufficient prediction accuracy and large error. Herein, a deep time-series regression framework based on InceptionTime and incorporating prior-biased attention pooling is proposed to construct a nonlinear mapping between electrochemical performance sequences and the discharge termination time of catalysts. Specifically, chronoamperometric profiles are employed to extract long-term stability features, while prior knowledge derived from linear sweep voltammetry is introduced to strengthen the attention weighting over critical potential regions. Under a nested leave-one-catalyst-out …

In Situ Electrochemical Characterization Techniques For Active Hydrogen In Electrocatalytic Nitrate Reduction To Ammonia, Hong-Mei Li, Mei Yi, Zhao-Yu Jin, Ming-Hao Xie, Khalid M. Omer, Yong Guo, Pan-Pan Li

Journal of Electrochemistry

Electrocatalytic nitrate reduction to ammonia (NitRR) represents a sustainable pathway that integrates environmental remediation with the production of high-value ammonia. However, the activity and selectivity of this process are limited by the generation, consumption, and dynamic equilibrium of the key transient intermediate—active hydrogen (*H). Precise modulation of *H necessitates a comprehensive understanding of its behavior, which relies fundamentally on advanced in situ electrochemical characterization techniques. However, a systematic review dedicated to the rational selection and application of in situ electrochemical techniques for the specific characterization of *H in NitRR, with clear definitions of each technique's "detectable targets, quantitative accuracy, and …

Microwave-Assisted Synthesis Of Core-Shell Structured Pd@Pdptcufe Recessed Truncated Octahedral Nanocrystals For Multifunctional Electrocatalysis, De-Zhong Hu, Wen-Dan Jiang, Wei Keat Ng, Jun Yang, Xiong-Wu Kang

Journal of Electrochemistry

Developing cost-efficient and durable multifunctional electrocatalysts of hydrogen evolution reaction, oxygen reduction reaction and oxygen evolution reaction is crucial for improving energy conversion efficiency in electrolytic water splitting electrolyzer and advancing rechargeable zinc-air batteries. Polyhedral shaped nanocrystals with well-defined crystal facets represent a type of model catalysts that enables the exploration of structure-activity relationships. However, it is still very challenging to prepare alloy nanocrystals with multiple metal components due to their complicated redox potentials and mixing enthalpy. Herein, we report a rapid microwave-assisted polyol reduction method for syntheses of core-shell Pd@PdPtCu, Pd@PdPtCuNi, Pd@PdPtCuCo and Pd@PdPtCuZn octahedral nanocrystals, and recessed truncated-octahedral …

Exploring Red Palm Oil As A Sustainable Plasticizer For Carbon Black-Filled Ssbr/Br Tire Tread Compounds: A Comparative Evaluation Of Commercial Alternatives, Norma Arisanti Kinasih, Mohamad Irfan Fathurrohman, Santi Puspitasari, Dewi Kusuma Arti, Abdulhakim Masa

Journal of Materials Exploration and Findings

This study investigates the application of red palm oil (RPO) as an alternative vegetable oil resource to substitute petroleum-based plasticizers, which have environmental and health concerns, in carbon black (CB)-filled SSBR/BR tire tread compounds. The plasticizing effects of RPO were thoroughly evaluated by comparing them with a commercial bio-based plasticizer, Epoxidized Soybean Oil (ESBO), and two safer petroleum-based oils, Naphthenic Oil (NYNAS) and Treated Distillate Aromatic Extract (TDAE). The initial investigation shows that fatty acid composition is imposing regarding the plasticizing effect. The higher unsaturated fatty acid content in RPO than in ESBO improved tensile strength and degraded rolling resistance …

Metallurgical Investigation Of A Modified Eye Bolt Failure Caused By Improper Weld Extension, Specification Deviation, And Crevice Corrosion, Dimas Muhammad Fawwaz, Reza Miftahul Ulum, Johny Wahyuadi Soedarsono, Yudha Pratesa

Journal of Materials Exploration and Findings

A modified eye bolt from the David Arm Manhole Storage Tank underwent thorough metallurgical study due to the consequences of the bolt's malfunction during operation. Safety issues arose when the manhole door detached during operation. The mechanical testing and chemical composition analysis of the bolts indicated they were manufactured from an ASTM A193 Grade B7 material used for high-temperature bolting. This material did not conform to the engineering drawing, which mentioned SA 563A, which is about nuts, not bolts. This contradiction clearly shows that the eye bolt which was installed does not conform to the intended design. Welded connections of …

Rejection Of Fe (Iron) And Kmno4 (Organic Substance) Parameters In Peat Water Using Organic Membranes, Muhamad Rafli Sakti Mulia Gonera, Siti Umi Kalsum, Sarah Fiebrina Heraningsih

Journal of Materials Exploration and Findings

Peat water is a surface water source widely used by people in swampy and lowland areas, but it has poor quality characteristics such as high organic matter content, low pH, and dissolved metal levels such as iron that exceed the threshold. These conditions can cause health problems and reduce the quality of clean water so that effective treatment technology is needed. This study aims to analyze the effectiveness of ultrafiltration membranes made from chitosan from shrimp shell waste in rejecting iron (Fe) and organic substances in peat water, and to determine the effect of pressure on separation performance. This study …

Percolation-Induced Thermo-Rheological Transitions In Biobased Graphene Nanoplatelet Nanofluids, Abiodun A. Saka, Tobechukwu K. Abor, Anthony C. Okafor, Monday U. Okoronkwo

Mechanical and Aerospace Engineering Faculty Research & Creative Works

Biobased lubricants with thermally responsive rheology are increasingly needed for high-efficiency mechanical systems. Graphene nanoplatelet (GnP) nanofluids in vegetable oils are promising candidates, yet their percolation-driven thermo-rheological transitions remain insufficiently understood. In particular, the coupled concentration–temperature landscape controlling network-mediated flow transitions has not previously been established. Here, surfactant-free GnP nanofluids were prepared in high-oleic soybean oil (HOSO) at concentrations of 0.025–2.15% v/v (ϕ), and their rheological response was mapped between 25°C and 80 °C under steady-shear and oscillatory conditions. Below the percolation threshold (ɸ ≤ 0.1% v/v), the nanofluids exhibit near-Newtonian behavior, moderate reversible viscosity enhancement, and classical Arrhenius-type temperature …

Synchrotron X-Ray Diffraction Method For Continuous Strain Analysis Across Heterogenous Material Interface Layers, Sierra Damon

Discovery Day - Daytona Beach

Synchrotron X-ray diffraction method for continuous strain analysis across heterogenous material interface layers   The transfer of strain across a material interface is a relevant concept to quantify for numerous aerospace applications that involve coatings applied to substrates of different materials, particularly in the field of high temperature materials. X-ray diffraction (XRD) is a metrology technique capable of resolving strain within an arbitrary material by quantifying the shifts of Bragg peaks with respect to an unstrained sample and has seen increased use due to the capability of XRD to perform in-situ measurements on materials in extreme environments. Since different materials have …

65th Annual Rocky Mountain Conference On Magnetic Resonance

Rocky Mountain Conference on Magnetic Resonance

Conference program, abstracts, and information about the 65th annual meeting of the Rocky Mountain Conference on Magnetic Resonance. Held in the Snowbird Resort and Conference Center, Snowbird, Utah, August 2-6, 2026.

A Semantic Data Management Framework For Uncertainty Quantification In Synchrotron Diffraction Pattern Analysis, Ayorinde E. Olatunde, Ozan Dernek, Erika I. Barcelos, Roger H. French, Anirban Mondal

Student Scholarship

Advancements in technology have enabled scientists and engineers in the synchrotron science domain to generate high-dimensional data. To conduct a machine learning study on these data, an analyst undergoes multiple analytical stages, including dimensionality reduction, predictive modelling, and uncertainty quantification (UQ).

To ensure reproducibility in science, it is necessary to document the semantic relationships among the stages of the analysis to enable provenance, interoperability, and knowledge reuse. In this work, we present a Semantic Data Management (SDM) framework rooted in FAIR principles that provides ontologies for UQ workflows. We illustrate the application of UQ ontology in synchrotron diffraction pattern analyses …

Synthesis And Characterization Of Carbon Quantum Dots And Gold Nanoparticles For Norovirus Biosensing Applications In Water Systems, Breanne Evans

Master's Theses

Rapid, reliable detection of viral pathogens remains a significant challenge across water-treatment and environmental monitoring systems, including drinking-water, wastewater, water reuse, and environmental surveillance applications. Waterborne viral contamination can pose substantial public-health risks, making early detection essential for protecting water quality and responding quickly to treatment failures or contamination events. Direct potable reuse (DPR) is one particularly demanding example because it requires continuous verification of treatment performance and the broader need for rapid virus monitoring extends across many water-treatment and environmental surveillance applications. Norovirus is a priority target because of its widespread occurrence in wastewater, environmental persistence, and exceptionally low …

In-Situ Stm Visualization Of Molecular Structural Evolution During Electrochemical Oxidation Coupling Of Para-Aminothiophenol On Au(111), Zi-Wei Ma, Tai-Rui Wu, An-Ni Zheng, Lai-Ke Chen, Yuan-Hui Xiao, Zhao-Bin Chen, Qing-Na Zheng, Jian-Zhang Zhou, Jia-Wei Yan, De-Yin Wu

Journal of Electrochemistry

Para-aminothiophenol (PATP) is not only a widely-used probe molecule in the field of surface-enhanced Raman spectroscopy (SERS), but also an important model molecule for interfacial reactions, exhibiting distinct photo- and electro-oxidation pathways, so that PATP is selectively activated under different external fields. The evolution of products and intermediates during electrochemical oxidative coupling remains unknown. In this study, we have investigated the dynamic electrochemical oxidation process of PATP on the Au(111) surface using cyclic voltammetry, electrochemical (EC)-SERS, and in situ electrochemical scanning tunneling microscopy (EC-STM). The results showed that PATP forms an unsaturated adsorption coverage on Au(111) in an acidic solution. …

Dynamic Reconstruction Engineering Of Anti-Corrosion Ni-Based Anodes For Alkaline Seawater Electrolysis, Yi-Gang Zhang, Wen-Wen Xu, Tian-Yu Zhang, Zhi-Yi Lu

Journal of Electrochemistry

Green hydrogen production via alkaline seawater electrolysis offers an environmentally sustainable and potentially cost-effective route to address both energy and climate challenges. Achieving long-term anode stability under complex ionic environments and industrial current densities remains a central bottleneck. Specifically, Ni-based anodes exhibit intense surface reconstruction during the oxygen evolution reaction, necessitating dynamic anti-corrosion strategies. This mini review systematically summarizes reconstruction engineering approaches to develop anti-corrosion Ni-based anodes of alkaline seawater electrolysis across increasingly complex ionic environments from simulated seawater to real seawater: (i) Cl^– dominated; (ii) Cl^– with co-existing oxyanions, and (iii) Cl^–  with co-existing Br^{– …}

Preparation And Performance Study Of In-Situ Self-Assembled Biphasic Smmn2O5-Nimn2O4 Composite Cathode, Neng-Chu Xia, Yu Zhou, Qin Wang, Jia-You Zhang, Chun Yu, Yang Zhang, Wan-Bing Guan, Jian-Xin Wang

Journal of Electrochemistry

Mullite-structured oxides exhibit excellent oxygen reduction reaction activity, possess a low thermal expansion coefficient due to their unique crystal structure, and can eliminate the need for a barrier layer and simplify the preparation process as they contain no alkaline earth elements. Thus, they hold great promise as novel cathode materials for solid oxide fuel cells. In this work, a mullite-spinel-structured SmMn₂O₅-NiMn₂O₄ (SMO-NMO) composite cathode was one-step synthesized via a solid-liquid composite route, and its in-situ self-assembly enabled good compatibility with the electrolyte without any barrier layer. Characterization results showed that the SMO:NMO = …

The Role Of Zinc Precursor Concentration In Modulating The Structural, Optical, And Electrical Properties Of Sol-Gel Derived Czts Thin Films, Justine John Tibaijuka

Tanzania Journal of Science

This study reports on CZTS thin films fabricated by sol–gel spin coating using zinc acetate dihydrate, copper acetate dihydrate, tin chloride, and thiourea dissolved in methanol with monoethylamine as a stabilizer. The films were annealed rapidly at 540 °C by using an RTP furnace. Results show the significant influence of zinc concentration on films’ properties with band gap evolution between 1.46 and 1.7 eV, along with high absorption coefficients exceeding 10⁴ cm⁻¹ in the visible range. Structurally, the films evolved from poorly crystalline at low Zn content to well- crystallized, (112)-oriented kesterite near stoichiometry. However, excessive Zn caused slight degradation …

Li+/Na+ Hybrid Ion Conduction Mechanism In The Superionic Conductor Li3–XNaXZr2Si2Po12, Yi-Hong Wu, Xia Xie, Lei Zhu, Mu-Ran Yu, Guo-Tai Zhang, Jun-Chao Chen, Shu-Ying Sun, You-Wei Wang, Wei-Ping Tang

Journal of Electrochemistry

Hybrid ion conductors that transport multiple ionic conductive species provide a useful platform for understanding how mixed-ion transport governs ionic conductivity within a single phase. However, the controlled introduction of multiple mobile ions into solid-state electrolytes and a mechanistic understanding of their migration within the framework remain challenging. Herein, a skeleton-retained Li⁺↔Na⁺ cationic exchange was used to simultaneously induce Li⁺ and Na⁺ cations into the NASICON-type framework of Li_3–xNa_xZr₂Si₂PO₁₂ (0 < x < 3). We show that the interpenetration of NaO₆ and NaO₈ coordination polyhedra significantly influences the ionic conductivity of hybrid ion conductors. Computational …

Distinct Co2 Electroreduction Behaviors Over Planar And Non-Planar Cobalt Molecular Catalysts, Ru Jia, Cheng-Biao Zhu, Zi-Mo Zhang, Tuo Wang, Kai-Cong Yang, Guang-Zhe Wang, Yang Hu, Ting-Ting Zhang, Zhen-Wei Wei, Li Xiao, Gong-Wei Wang, Lin Zhuang

Journal of Electrochemistry

Molecular catalysts serve as ideal platforms for studying electrocatalytic reaction mechanisms. While current research mainly focuses on modulating central metals or surrounding ligands, the influence of molecular spatial configuration remains largely unexplored. Herein, we synthesized two cobalt complexes with similar ligand environments but distinct spatial geometries, a planar cobalt hexaazamacrocyclic complex (CoHAM) and a non-planar acyclic Co(phen)₂Cl₂, and evaluated their performance in CO₂ reduction reaction (CO₂RR). The planar CoHAM exhibited dramatically superior CO₂RR performance compared to the non-planar Co(phen)₂Cl₂. Through a series of combined analyses using in-situ …

Distribution And Transport Of Lithium Ions At Interfaces Between Graphite And Carboxymethyl Celluloses, Zi-Jun Huang, Zhen-Ying Zheng, Hua-Wei Cao, Jian Wang, Qing-Feng Zhang, Sheng-Li Chen

Journal of Electrochemistry

Carboxymethyl cellulose (CMC) is a water-processable binder widely used for graphite anodes. However, a microscopic understanding of why the identity of CMC counterions (Li⁺/Na⁺/K⁺) strongly affects electrode performance remains limited. Here, molecular dynamics (MD) simulations are used to track Li⁺ transport accessibility across electrolyte/CMC/graphite three-phase interfaces, comparing pure CMC-Li, CMC-Na, CMC-K, and mixed-counterion CMC binders. We find that CMC-Li sustains a continuous Li⁺ transport pathway from the electrolyte through the binder phase toward graphite. In contrast, in CMC-Na and CMC-K, Na⁺/K⁺ ions preferentially enrich at the graphite/binder interface, forming …

Study On Deformation Characteristics Of Kaolin Under Dry-Wet And Freeze-Thaw Cycles, Yang Shang, Xiao Dingyuan

Journal of China & Foreign Highway

In seasonally frozen areas, surface soil is subjected to prolonged and drastic fluctuations in temperature and humidity, causing excessive deformation and resulting in engineering issues such as subgrade settlement and building deformation. The deformation characteristics of kaolin in seasonally frozen areas under the combined influence of freeze-thaw and dry-wet cycles were studied. Through a self-designed experimental setup, experiments with interleaved dry-wet and freeze-thaw cycles were conducted on compacted specimens, and wetting-freezing-thawing-drying cycle experiments were performed to explore the swelling-shrinkage deformation characteristics of kaolin under the combined action of different freeze-thaw and dry-wet cycles. The results indicate that intermittent freeze-thaw cycles …

Influence Of Geocell Technical Parameters On Bearing Characteristics Of Highway Subgrades In Oasis Areas, Zhu Chunsheng, Shu Xingyu, Lu Huiyu, Yang Xiaohua

Journal of China & Foreign Highway

To study the effects of technical parameters, such as geocell specifications and laying types, on the bearing capacity and deformation of highway subgrades in oasis flood irrigation areas, the shear properties of plain soil and geocell-reinforced layers with different specifications were studied through large-scale direct shear tests. Based on indoor compression tests and field load tests, numerical simulation parameters, such as the deformation modulus of different foundation soil layers, were calibrated. A numerical model of the geocell-reinforced highway subgrade was established using, and the effects of geocell specifications and laying types on the vertical settlement of the subgrade, the displacement …

Study On Effects Of Phase Change Materials On Thermal Erosion Resistance Of Airport Pavement, Li Ping, Li Yunlong, Zheng Zhipeng, Wang Zhijian, Yi Chengxi

Journal of China & Foreign Highway

To investigate the effect of phase change materials (PCMs ) on improving the thermal erosion resistance of airport pavements and to provide recommendations for selecting optimal PCMs to obtain airport pavements with longer service lives, three PCMs, PCM-G- 98 (A), LB- 2 (B), and TH-HC- 120 (C), were purchased based on literature summaries and market research. Based on microscopic test results and the actual preparation conditions of modified asphalt, PCMs A and B were selected. Subsequently, based on a self-made high-content SBS modified asphalt (S), four groups of composite modified asphalts (S-A- 5, S-A- 10, S-B- 5, and S-B- 10) …

Study On Influence Of Elastic Modulus Of Fiber On Compaction Characteristics Of Asphalt Mixtures, Zou Zexi, Luo Kaiyan, Lin Zhiming, Qiu Xiang, Lu Xudong, Yao Xiaoyang, Wang Yaolong

Journal of China & Foreign Highway

To investigate the influence mechanism of fiber incorporation on the compaction characteristics of asphalt mixtures, six types of typical road fibers (polyester fiber, polyacrylonitrile fiber, aramid fiber, basalt fiber, polypropylene fiber, and polyvinyl alcohol fiber) were selected in this paper, and gyratory compaction tests were conducted based on AC- 20 graded mixtures. The compaction coefficient (a larger compaction coefficient indicates easier compaction) was used as the core evaluation index. The results indicate that the elastic modulus of the fiber is the key influencing factor. When the fiber modulus is 50% lower than the aggregate modulus (such as polyester fiber and …

Angularity Evaluation Of Coarse Aggregates Based On Local Feature Extraction Of Point Clouds, Ma Quanzhuo, Feng Ponan, Feng Zezhong, Lei Mingyu, Wang Zhenfeng, Li Jiange

Journal of China & Foreign Highway

The morphological characteristics of coarse aggregates significantly affect the mechanical properties of asphalt mixtures and thus directly influence their road performance and durability. This paper aims to innovatively propose an evaluation method for the angularity of coarse aggregates. A three-dimensional (3D) scanner was used to acquire the surface profile information of coarse aggregates, and local angularity features were extracted through point cloud data analysis. Subsequently, a comprehensive 3D angularity evaluation index for coarse aggregates (A3D) was proposed by combining local normal vectors and curvature characteristics. The results indicate that A3D can be more accurately and independently used for angularity evaluation. …

Optimization Design And Experimental Study On Strength Of Ternary Industrial Solid Waste Mixtures, Yang Shu, Ai Yi, Sheng Shanwang, Li Chuangmin

Journal of China & Foreign Highway

This paper aims to explore whether fly ash, lithium slag, and slag powder (ternary industrial solid wastes) can effectively replace cement as cementitious materials for interlocking large-particle crushed stone bases. A uniform design table U9(94) was used to design the test scheme for the mixing ratios of ternary industrial solid waste mixtures; the correlation between the mortar strength and the ternary industrial solid waste mixtures was analyzed by Pearson correlation; with the help of the mathematical statistical software SPSS 26.0, mathematical models for the flexural strength and compressive strength of the ternary industrial solid waste mixture mortar specimens were established. …

Calculation Of Tensile Force For Cable-Stayed Buckling Bracket Combined With Temporary Tie Rod Structure Of V-Shaped Pier, Zhao Xiaolu, Yang Guang, Liu Junle, Qiu Zhiwei, Meng Lingxin, Peng Weibing

Journal of China & Foreign Highway

To solve the problem of excessive tensile stress of the cross-section during the cantilever casting process of high piers with inclined legs, a determination method of tensile force based on the linear programming theory and unstressed state control was proposed. Based on the internal force equilibrium method and the principle of influence matrix, the method optimized the tensile force with “stress control as the primary and alignment control as the auxiliary”. The unstressed state control method was adopted for forward iteration, and the effect of tangential displacement between segments was considered to verify the alignment of the inclined legs. Finally, …

Analysis Of Influence Of Cable Clamp Slippage On Internal Force And Alignment Of Main Cable, Zhu Kun, Liao Dinghui, Hu Chengze, Shen Heshun, Cao Hongyou

Journal of China & Foreign Highway

To investigate the influence of cable clamp slippage on alignment and internal force of the main cable, a theoretical analysis method based on node coordinates of the main cable after cable clamp slippage was proposed in this paper. Based on segmented catenary theory, the influence of hanger inclination caused by hanger slippage on the horizontal force of the main cable was considered. The segmental cable element of the main cable was equivalently expressed as expressions of hanger tension and unstressed length. With total unstressed length kept constant as a control condition, the horizontal force of the main cable was iteratively …

Study On Structural Design And Load Transfer Performance Of 6-Hole Flat Anchor Plate, Liao Yuanyuan, Ling Lihua, Wu Qibin, Cheng Bin, Dai Dongming

Journal of China & Foreign Highway

For negative bending moment prestressed tendons in simply supported-to-structurally-continuous bridges, the flat anchorage method of flange plate is more reasonable, but its widespread application is limited due to the anchoring capacity restrictions of flat anchor plates. To improve the anchoring capacity of a single anchorage zone, reduce the number of prestressed ducts, save concrete, and improve construction efficiency, a novel 6-hole flat anchor plate was developed, designed, and manufactured in this paper. By combining finite element analysis and experimental methods, a finite element analysis model of the concrete load transfer specimen beneath the novel 6-hole flat anchor plate was established, …

Analysis Of Shear Bearing Mechanism And Influencing Factors Of Mcl-Shaped Composite Dowel Connector, Zeng Zhuo, Zhou Baicheng, Cheng Xianjie, Cao Zhengxing, Gao Rongxiong, Wang Zichao

Journal of China & Foreign Highway

To investigate the bearing mechanism of modified clothoid (MCL)-shaped composite dowel shear connectors and the influence laws of various factors on their shear bearing capacity, the stress states and failure modes of the steel dowel, concrete dowel, and transverse through-reinforcement that constitute the MCL-shaped shear connector were deeply analyzed in this paper based on an experimentally validated finite element model. Furthermore, the influence laws of transverse through-reinforcement, steel dowel thickness, and concrete strength on the shear bearing capacity of the MCL-shaped composite dowel were explored. The research results indicate that the bearing process of the MCL-shaped composite dowel exhibits elastic, …

Research On Improving Bearing Capacity Of Full-Scale Prestressed Concrete Small Box Girders, Huang Jianyun, Gao Linli, Liu Zufeng, Ma Jinku, Ma Ming, Wang Xiaoguang

Journal of China & Foreign Highway

To solve the problems of lacking comparative research on the improvement effects of different reinforcement methods when formulating reinforcement schemes for prestressed concrete small box girders and that existing bearing capacity improvement tests mostly focus on scale models with insufficient reliability of results, full-scale model tests and numerical simulation analysis of five 30 m span prestressed concrete small box girders with different joint reinforcement measures were conducted in this paper. Finite element models for two single reinforcement measures were established, and the improvement effects of different reinforcement methods on the bearing capacity of prestressed concrete small box girders were studied. …