Open Access. Powered by Scholars. Published by Universities.®

Materials Science and Engineering Commons™

Open Access. Powered by Scholars. Published by Universities.®

Physical Chemistry

Institution
Keyword
Publication Year
Publication
Publication Type

Articles 1621 - 1650 of 1912

Full-Text Articles in Materials Science and Engineering

The Study On Lithiated Titanium Composite Oxides As Negative Electrode For Lithium-Ion Battery, Xiao-Yan Yang, Shou-Nan Hua, Shu-Yong Zhang Aug 2000

The Study On Lithiated Titanium Composite Oxides As Negative Electrode For Lithium-Ion Battery, Xiao-Yan Yang, Shou-Nan Hua, Shu-Yong Zhang

Journal of Electrochemistry

Lithiated titanium composite oxides Li4Ti5O12 were prepared from Li2CO3 and TiO2. The XRD results of this composite oxides indicated that the compound had a spinel structure. The electrochemical behavior of lithiated titanium composite oxides was examined. The results showed that this material had an excellent cyclic capability and reversibility for lithium insertion, and had high specific capacity: the initial discharge capacity was 300 mAh·g-1 , and the reversible capacity was 100 mAh·g-1 . The discharge plateau (about 1.5 V) and the charge plateau (about 1.6 V) were very …

Go to article

Corrosion Behavior Of Reinforcing Steel In Concrete, Rong-Gui Du, Rong-Gang Hu, Zu-De Feng, Jiang-Guang Tan, Chang-Jian Lin Aug 2000

Corrosion Behavior Of Reinforcing Steel In Concrete, Rong-Gui Du, Rong-Gang Hu, Zu-De Feng, Jiang-Guang Tan, Chang-Jian Lin

Journal of Electrochemistry

The corrosion behavior of reinforcing steel in concrete in chloride free and chloride contaminated simulated concrete solutions was studied by electrochemical technique. The results showed that the reinforcing steel exhitibted different corrosion characteristics in the different solutons. In general, the steel in concrete was protected in the test solutions with no salt or the lower concentration of NaCl. When the concentration of NaCl is larger than 70%, however, the corrosion behavior of the steel varied considerably, and the corrosion rate increased as pH fell and the concentration of Cl- increased.

Go to article

The Effect Of Cerium On The Anodic Behavior Of Pb-Ca-Sn Alloy In Sulfuric Acid Solution, Hou-Tian Liu, Jiong Yang, Hai-He Liang, Ji-Hua Zhuang, Wei-Fang Zhou Aug 2000

The Effect Of Cerium On The Anodic Behavior Of Pb-Ca-Sn Alloy In Sulfuric Acid Solution, Hou-Tian Liu, Jiong Yang, Hai-He Liang, Ji-Hua Zhuang, Wei-Fang Zhou

Journal of Electrochemistry

The cyclic voltammograms for Pb - 0.5 at% Ca - 1.5 at% Sn and Pb - 0.5 at% Ca - 1.5 at% Sn containing a certain amount of cerium in 4.5 mol·dm-3 H2SO4 at 20℃ were measured between 0.6 V and 1.4 V(vs. Hg/Hg2SO4). The growth rate of the anodic Pb(Ⅱ) films formed on the mentioned alloy electrodes at 0.9 V in the same sulfuric acid medium was investigated using the Linear Sweep Voltammetry. The variation with electrode potential of the real part of the impedence (Z’) for the anodic Pb(Ⅱ) films …

Go to article

The Lineal Polarization Method For Corrosion Rate Measurement Of Reinforcing Bar Of Concrete In Situ, Ai-Ling Du, Wen-Tao Hou, He-Ming Zhang, Jian-Qun Luo Aug 2000

The Lineal Polarization Method For Corrosion Rate Measurement Of Reinforcing Bar Of Concrete In Situ, Ai-Ling Du, Wen-Tao Hou, He-Ming Zhang, Jian-Qun Luo

Journal of Electrochemistry

A linear polarization method was applied to measure corrosion rate of reinforcing bar of concrete in situ. Generally in the experiment, the area and shape of the reinforcing bar as a working electrode can be changed and adjusted according to our needs. But polarization area cannot be defined when reinforcing bar is polarized in situ, so that a real Rp can't be obtained. Thus the purpose of present work is to improve the measurement system. We used the double-ring auxiliary electrodes made by ourselves. The size of the double-ring auxiliary electrodes was adjusted repeatedly until the real polarization area …

Go to article

The Electrochemical Polymerization Of Erythrosin And The Fluorescence Spectra Of Polyerythrosin, Hong-Ping Zhu, Shao-Lin Mu Aug 2000

The Electrochemical Polymerization Of Erythrosin And The Fluorescence Spectra Of Polyerythrosin, Hong-Ping Zhu, Shao-Lin Mu

Journal of Electrochemistry

The solution used for the electrolysis consisted of 0.03 mol·dm-3 erythrosin, 0.05 mol·dm-3 sodium tetraborate and 0.5 mol·dm-3 KCl with pH 8.50. Polyerythrosin film with red color has been electrochemically synthesized using repeated potential cycling between -0.20 and 1.10 V (vs.SCE). The film growth and the electrochemical property of polyerythrosin are affected by electrolytic conditions. Two main absorption peaks of polyerythrosin at 326 nm and 370 nm appear in the UV-visible spectrum, which are different from that of the monomer. Polyerythrosin in dimethyl sulfoxide or dimethylformamide has a strong fluorescence intensity and the fluorescence intensity of polyerythrosin …

Go to article

The Electro-Catalytic Oxidation Of Hcooh On Electrodeposited Pd Electrode, Quan Zhou, Cun-Zhong Zhang, Xiao-Lin Lu, Zhong-Da Wu Aug 2000

The Electro-Catalytic Oxidation Of Hcooh On Electrodeposited Pd Electrode, Quan Zhou, Cun-Zhong Zhang, Xiao-Lin Lu, Zhong-Da Wu

Journal of Electrochemistry

The coherent electroplates were prepared by electro depositing Pd on supporting materials glassy carbon. The surface morphology of the electrodes was examined by SEM. The electro oxidation of HCOOH in HClO4 solution was investigated by using cyclic voltammetry. The results show that the deposited conditions in the preparation of electrodes by electro depositing Pd affect the electrodes electro catalytic activity to the oxidation of HCOOH. The platinized Pd electrode on GC substrates using large current density is of higher catalytic activity to the oxidation of HCOOH than Pd electrode. The electro catalytic activity of PdO formed on the Pd …

Go to article

Electrochemical Characteristics Of Sb Irreversibly Adsorbed On Pt(100), Pt(110), Pt(111) And Pt(320) Electrodes, Yi-Yun Yang, Zhi-You Zhou, Qi-Hui Wu, Shi-Gang Sun Aug 2000

Electrochemical Characteristics Of Sb Irreversibly Adsorbed On Pt(100), Pt(110), Pt(111) And Pt(320) Electrodes, Yi-Yun Yang, Zhi-You Zhou, Qi-Hui Wu, Shi-Gang Sun

Journal of Electrochemistry

The electrochemical behaviors of irreversibly adsorbed antimony on Pt(100), Pt(110), Pt(111) and Pt(320) were studied by using cyclic voltammetry. The results revealeds that the Sb adatoms are stable on Pt(100), Pt(110), Pt(111) and on Pt(320) when electrode potentials are below 0.45 V(SCE) and 0.40 V, respectively. It was demonstrated that various coverages of Sb ad can be conveniently obtained by controlling the number of potential cycling and varying the upper limit of potential scan. The electrochemical behaviors of irreversibly adsorbed antimony varied with the surface atomic arrangement of Pt single crystal electrodes. Based on quantitative results of the relationship between …

Go to article

A Study On Stochastic Resonance For The Process Of Active-Passive Transition Of Iron In Sulfuric Acid, Hong-Bo Ding, Bao-Yun Xia, Chun-Sheng Yin, Zhong-Xiao Pan, Renato Seeber Aug 2000

A Study On Stochastic Resonance For The Process Of Active-Passive Transition Of Iron In Sulfuric Acid, Hong-Bo Ding, Bao-Yun Xia, Chun-Sheng Yin, Zhong-Xiao Pan, Renato Seeber

Journal of Electrochemistry

The bistable characteristics of the process of active passive transition of iron in sulfuric acid was described and the stochastic resonance phenomenon in the process was simulated.

Go to article

Synthesis Of Li1+XMn2O4 Cathode Material For Lithium-Ion Batteries With Solution Method, Pei-Song Liu, Sing-Quarn Liu, Qing Li, Zhao-Yong Chen, Bai-Lan Zhang, Zuo-Long Yu Aug 2000

Synthesis Of Li1+XMn2O4 Cathode Material For Lithium-Ion Batteries With Solution Method, Pei-Song Liu, Sing-Quarn Liu, Qing Li, Zhao-Yong Chen, Bai-Lan Zhang, Zuo-Long Yu

Journal of Electrochemistry

The cathode materials Li1+xMn2O4 were prepared with citric acid complexing and solution impregnating methods. Structure characterization and specific surface area test were performed by means of XRD, BET methods, the influences of calcination temperature, Li/Mn molar ratio and raw materials on the structure and electrochemical capacity of samples have beem examined. The results showed that the Li/Mn molar ratio and calcimation temperature were the key factors affecting the electrochemical capacity of cathode materias. The optimum conditions for synthesis of  Li1+xMn2O4 cathode material were 0≤x≤0.05 and calcined at 750°C. The initial …

Go to article

The Effect Of Anode Thickness In Sofcs With Anode Supported Ysz Film, Yi-Huang Zhang, Yi Jiang, Zi-Gui Lu, Yong-Lai Dong, Jing-Wang Yan Aug 2000

The Effect Of Anode Thickness In Sofcs With Anode Supported Ysz Film, Yi-Huang Zhang, Yi Jiang, Zi-Gui Lu, Yong-Lai Dong, Jing-Wang Yan

Journal of Electrochemistry

Solid oxide fuel cells with supported yttria stabilized zirconia electrolyte films on anode substrates of various thickness have been fabricated. The electrochemical performances of the SOFCs have been examined. The results showed that the cell performance was limited by the anodic overpotential, which is caused mainly by a concentration polarization when the anode substrate is thick. The anodic overpotential was reduced obviously as the thickness of anode substrate was decreased. As a result, the performance of the SOFC cell was improved. With a 0.5 mm anode substrate, a SOFC cell produced a power density about 0.19 W/cm2 at 800 …

Go to article

A New Method For The Preparation Of The Electrodes With Very Low Platinum Loading Used In Proton Exchange Membrane Fuel Cell, Zhi-Gang Shao, Bao-Lian Yi, Ming Han, Ya-Guang Qiao, Hao Liu, Jing-Rong Yu Aug 2000

A New Method For The Preparation Of The Electrodes With Very Low Platinum Loading Used In Proton Exchange Membrane Fuel Cell, Zhi-Gang Shao, Bao-Lian Yi, Ming Han, Ya-Guang Qiao, Hao Liu, Jing-Rong Yu

Journal of Electrochemistry

Research and development on low platinum loading electrode is very important in reducing the cost of proton exchange membrane fuel cell(PEMFC) stack. This paper has put forward a new method to prepare the electrode of PEMFC. The pore forming substances were used in this methd. The low platinum loading electrodes (0.02 mgPt⋅cm-2) have already been prepared with the method. Compared with the traditional method, the new method is simple, cheep, and easy to scale up. The superior composition of the electrodes is catalyst: pore forming substance: Nafion= 3:3:1. The performance of a single cell using this …

Go to article

Technical Investigaton Of Thin-Film Plasticizing Lithium Ion Battery, Xin-Ping Ai, Xin-Lin Hong, Quan-Feng Dong, Sheng-Xian Li, Han-Xi Yang May 2000

Technical Investigaton Of Thin-Film Plasticizing Lithium Ion Battery, Xin-Ping Ai, Xin-Lin Hong, Quan-Feng Dong, Sheng-Xian Li, Han-Xi Yang

Journal of Electrochemistry

A number of polymer materials as candidates of host matrix of plastic polymer electrolyte were examined and techniques for preparation of thin-film electrolyte were reported. The results showed that the polymer electrolyte prepared with P(VDF-HFP) copolymer as host matrix and DBP as plasticizer exhibit the satisfactory mechanical strength and ionic conductivity. In comprison with liquid electrolyte systems, thin-film lithium ion battery has almost similar charge-discharge capacity and cycleability. The manufacture methods and the technical factors in making plasticizing lithium ion battery were also described in details.

Go to article

The Studies On Nanosized Materials For Lithium Ion Batteries, Hong Li, Jing-Ze Li, Li-Hong Shi, Guang-Yan Zhu, Qing Chen, Wei Lu, Xue-Jie Huang, Li-Quan Chen May 2000

The Studies On Nanosized Materials For Lithium Ion Batteries, Hong Li, Jing-Ze Li, Li-Hong Shi, Guang-Yan Zhu, Qing Chen, Wei Lu, Xue-Jie Huang, Li-Quan Chen

Journal of Electrochemistry

Our recent works about nanosized materials for lithium ion batteries are reported, including the synthesis of nanosized Sb, SnSb, CuSnx, Si and CuS, their electrochemical performance as anode or cathode active materials, the variation of crystal structure and morphology during discharge and charge cycling. In addition, the self-plasticization of lithium salt with nanosized anion ion in polymer electrolyte, the influence of the electrochemical Li-doping on the Raman spectra and photoluminescence of nano-Si are also introduced. Furthermore, the relationship between intrinsic properties of nanosized materials and their electrochemical behaviors are discussed. The prospect of nanosized materials for lithium ion …

Go to article

Determination Of Kinetic Parameters Of Enzyme-Immunoelectrode For Sec Assay, Sa-Ying Dong, Xin-Miao Liu, Yuan-Zhi Wang, Guang-Zhang Chen, Ming-Xiang Lv, Bo-Yi Tian May 2000

Determination Of Kinetic Parameters Of Enzyme-Immunoelectrode For Sec Assay, Sa-Ying Dong, Xin-Miao Liu, Yuan-Zhi Wang, Guang-Zhang Chen, Ming-Xiang Lv, Bo-Yi Tian

Journal of Electrochemistry

Reaction mechanism of enzyme immunoelectrode is studied by potentiostatic. Rotating disk electrode is used to determine the controlling step of bioelectrode. Under different potentials and different modifying conditions, kinetic parameters of bioelectrodes were measured on the base of electrochemical impendance spectra. At the same time, these parameters are compared and discussed.

Go to article

The Influence Of Surface Diffusion Of Adsorbed Intermediate On Hydrogen Evolution Reaction At Pt/Nafion Composite Electrodes, Wei-Yi Tu, Lei Su, Wen-Jun Liu, Bing-Liang Wu May 2000

The Influence Of Surface Diffusion Of Adsorbed Intermediate On Hydrogen Evolution Reaction At Pt/Nafion Composite Electrodes, Wei-Yi Tu, Lei Su, Wen-Jun Liu, Bing-Liang Wu

Journal of Electrochemistry

The decrease of over-potential of hydrogen evolution reaction at Pt black powder/Nafion microelectrode, comparing that of the Pt microdisk/Nafion electrode, was evident from the polarization curves of the Pt microdisk/Nafion electrode, platinized Pt micrdisk/Nafion electrode and Pt black powder/Nafion microelectrode. It is also evidenced by a plane Pt electrode with an additional free Pt surface. The surface diffusion and the surface recombination reaction of the adsorbed intermediate at the free surface of the Pt particles were supposed. It is an additional reaction path that induced the decrease of the concentration of the adsorbed intermediate. Thereby, the over-potential decreased.

Go to article

Powder Microelectrode Modified With Nafion-Os(Bpy)3Â 2+ And Pvp Composite And Its Catalysis For No2- Reduction, Pei-Fang Liu, Jia-Wei Yan May 2000

Powder Microelectrode Modified With Nafion-Os(Bpy)3Â 2+ And Pvp Composite And Its Catalysis For No2- Reduction, Pei-Fang Liu, Jia-Wei Yan

Journal of Electrochemistry

The modified powder microelectrode was prepared by etching a Pt (0.1 mm diameter) disk microelectrode and filling in thus formed cavity with Nation-Os(bpy)32+/PVP composite modified carbon powder. The composite modified powder microelectrode showed cyclic voltammetric behaviors changing with the mole ratio (denoted X) of SO3- to Os(bpy)32+ in Nafion. When X=3, a single pair of current peaks appeared near 0.6V (vs. SCE) due to Os(bpy)32+/3+ redox couple. In contrast, for X=20, a pair of additional current peaks occurred near 0.4V. Both X=3 and X=20 modified powder microelectrodes strongly catalyzed the first …

Go to article

Electrocrystallization Mechanism And Grain Sizes Of Ni-W-B Alloy Eletrodeposits, Fang-Zu Yang, Gang-Min Cao, Xiao Hu, Shu-Kai Xu, Shao-Min Zhou May 2000

Electrocrystallization Mechanism And Grain Sizes Of Ni-W-B Alloy Eletrodeposits, Fang-Zu Yang, Gang-Min Cao, Xiao Hu, Shu-Kai Xu, Shao-Min Zhou

Journal of Electrochemistry

The electrodeposition characteristics and grain sizes of Ni-W-B alloy have been studied by cyclic voltammetry, potentiostatic step and X-ray diffraction (XRD). The results showed that Ni-W-B alloy electrodeposit obtained from the solution containing ammonium citrate as a complexing agent was presented in the lower electrochemical activity compared with Ni-W alloy. Based upon the i～t curves of potentiostatic step, it was revealed that electrocrystallization of Ni-W-B alloy on glassy carbon followed the mechanism of instantaneous nucleation and three dimensional growth with diffusion controlled. The crystal nucleus number on the surface of electrode was raised by the increase of overpotential. According to …

Go to article

Study On Carbon From Pyrolyzing Phenol-Formaldehyde Resin For The Negative Electrode Of Li-Ion Secondary Battery, Zhi-Yuan Tang, Xin-Guo Zhuang, Yu-Mei Zhai, Jian-Gang Li, Jian-Jun Xue, Chun-Yan Liu May 2000

Study On Carbon From Pyrolyzing Phenol-Formaldehyde Resin For The Negative Electrode Of Li-Ion Secondary Battery, Zhi-Yuan Tang, Xin-Guo Zhuang, Yu-Mei Zhai, Jian-Gang Li, Jian-Jun Xue, Chun-Yan Liu

Journal of Electrochemistry

Li-ion secondary batteries negative electrodes were prepared by low temperature (<1 000 ℃) pyrolysis of commercial phenol-formaldhyde resin. A thermogravimetric analysis (TGA) and an X-ray diffraction (XRD) studies were peoformed for the pyrolytic carbonaceous materials. The results indicated that these samples are amorphous polyacenic structure materials. With increasing pyrolytic temperature, these materials become structurally order, and the first charge-discharge special capacities reduce. The specific capacities base on pyrolytic temperature, involving lithium storage nanometer cavities.

Go to article

Preparation And Characteristics Of A Enzyme Electrode Based On Immobilization Of Tyrosinase In Electropolymerized Polypyrrole Film, Liu-Shui Yan, Qia Wei, Cheng-Yi Wang, Rong-Rong Shi, Xiao-Tong Ma May 2000

Preparation And Characteristics Of A Enzyme Electrode Based On Immobilization Of Tyrosinase In Electropolymerized Polypyrrole Film, Liu-Shui Yan, Qia Wei, Cheng-Yi Wang, Rong-Rong Shi, Xiao-Tong Ma

Journal of Electrochemistry

A sensitive and stable amperometric enzyme electrode was constructed, based on the immobilization of tyrosinase in potentiostatically electropolymerized polypyrrole film at a platinum electrode. The influence of pH and potential on immbilization was discussed. SEM micrographs and CV curves of films obtained before and after incorparation of tyrosinase molecular were analyzed and compared each other. The enzyme electrode responds linearly to p-cresol over a concentration range of 5×10 -8 ～1×10-6 mol/L with an optimum pH of 6.6, It exhibited kinetic characteristics of the typical enzyme-catalyzed reaction with an apparent Michaelis constant of 2.2 ×10-5 mol/L.

Go to article

An Investigation On The Corrosion Potential Imaging At The Interface Of Concrete/Reinforcing Bar In Corrosion Media, Rong-Zong Hu, Chang-Jian Lin, Xiang Zhou, Jian-Guang Tan, Xiong-Chao Zhao May 2000

An Investigation On The Corrosion Potential Imaging At The Interface Of Concrete/Reinforcing Bar In Corrosion Media, Rong-Zong Hu, Chang-Jian Lin, Xiang Zhou, Jian-Guang Tan, Xiong-Chao Zhao

Journal of Electrochemistry

The iron array electrode covered with concrete as a new electrochemical technique is applied to map the potential imaging and to investigate on the iron electrode corrosion process under concrete: In Cl- solution the corrosion of the iron array electrode covered with concrete had been prevented for a short term since the concrete protection, but the corrosion still occurreed and developed after immersed for a long time. In SO42- solution although the sample had being immersed for a long time and the concrete was possibly broken, the corrosion did not develop. In Cl- solution the corrosion …

Go to article

Template Synthesis And Uv-Vis Absorption Spectra Of The Nanowire Arrays Of Cadmium Chalcogenides, Shi-Min Xu, Kuan-Hong Xue, Jing-Lin Kong, Dong-Mei Sun, Yu-Ying Feng, Hai-Yan Lu, Guang-Hou Wang May 2000

Template Synthesis And Uv-Vis Absorption Spectra Of The Nanowire Arrays Of Cadmium Chalcogenides, Shi-Min Xu, Kuan-Hong Xue, Jing-Lin Kong, Dong-Mei Sun, Yu-Ying Feng, Hai-Yan Lu, Guang-Hou Wang

Journal of Electrochemistry

The porous alumina membrane formed in the anodic oxidation of highly pure aluminum foil has attracted a great deal of attention in recent years. It can be served as a desired template to prepare nanometer scale materials due to its unique structure of discrete and cylindrical nanopores, paralleled one another, with the homogeneous size and distribution. Chalcogenide semiconductors have promising prospect in the applications of photovoltaic and photoconducting devices and have been extensively exploited for many years. Olbright and his co-workers studied experimentally and theoretically the optical nonlinearties of CdSxSe1-x-doped glass; Britt and Ferekides reported that …

Go to article

Electrochemical Quartz Crystal Microbalance Study On The Promoted Electron Transfer Process At Gold Electrode, Xia-Qin Wu, Zhe-Su Wang, Xiao-Yun Meng, Zong-Rang Zhang May 2000

Electrochemical Quartz Crystal Microbalance Study On The Promoted Electron Transfer Process At Gold Electrode, Xia-Qin Wu, Zhe-Su Wang, Xiao-Yun Meng, Zong-Rang Zhang

Journal of Electrochemistry

The adsorption behavior of amino acids, such as L-cysteine, histidine and arginine at gold-quartz crystal microbalance (Au-QCM) was investigated. The adsorption quantity of cysteine is more appreciable than others because of the stronger interaction between its thiol group and the gold electrode surface. The electron-transfer process of superoxide dismutase (SOD) in presence of cysteine at Au-QCM has also been studied using the electrochemical quartz crystal microbalance (EQCM) technique which reveals clearly the quasi-reversible electron-transfer process accompanied by the frequency shift cycle. The reversible adsorption and disorption processes are discussed.

Go to article

Effects Of Temperature On The Proton Diffusion Of Doped Ni(Oh)2, Jian-Hua Liu, Jing-Wu Yang, Zhi-Yuan Tang May 2000

Effects Of Temperature On The Proton Diffusion Of Doped Ni(Oh)2, Jian-Hua Liu, Jing-Wu Yang, Zhi-Yuan Tang

Journal of Electrochemistry

The Chronoamperometry of powder spherical Ni(OH)2 microelectrode was used to study the proton diffusion coefficients of Ni(OH)2. The proton diffusion coeefficients and the apparent diffusion active energy in anode and cathode processes at different temperature were obtained. Compared with pure Ni(OH)2, the apparent diffusion active energy (Ea) of Ni(OH)2 doped with Co and Co + Zn was decreased and the diffusion constant (Do) was increased in the anode and the cathode processes, respectively, the effect of Co was greater. In contrast, for Ni(OH)2 doped with Zn, its Ea …

Go to article

Study On The Effect Of Sodium Ion On Cycle Performance Of Lithium/Improved Graphite Lithium Ion Cell, Wen-Huang Huang, Yu-Shun Yan, Chun-Rong Wan, Chang-Yin Jiang May 2000

Study On The Effect Of Sodium Ion On Cycle Performance Of Lithium/Improved Graphite Lithium Ion Cell, Wen-Huang Huang, Yu-Shun Yan, Chun-Rong Wan, Chang-Yin Jiang

Journal of Electrochemistry

The different concentration of Na+ was introduced into the non-aqueous eletrolyte system EC/DEC/LiClO 4 with 4A molecular sieve and lithiated 4A molecular sieve, by which the trace amount of water was removed. The concentrations of Na+ and Li+ were determined by atomic adsorption spectrometry. The cycle performance of lithium/improved graphite cells was then examined by charging and discharging under the constant electric current. The results demonstrated that the cycle performance of the cells was destroyed by the high concentration of Na+ under the small electric current. With the increase of electric current the cell became less …

Go to article

Studies Of Abnormal Infrared Effects Of Nanometer Thin Films Of Transition Metals And Alloys In Acid Solutions, Shi-Gang Sun, Ming-Sen Zheng, Guo-Qiang Lu, Li-Rong Cai, Sheng-Pei Cehn, Xiao-Yin Xiao Feb 2000

Studies Of Abnormal Infrared Effects Of Nanometer Thin Films Of Transition Metals And Alloys In Acid Solutions, Shi-Gang Sun, Ming-Sen Zheng, Guo-Qiang Lu, Li-Rong Cai, Sheng-Pei Cehn, Xiao-Yin Xiao

Journal of Electrochemistry

The adsorption of CO on electrodes of nanometer thin films of transition metals (Pt, Pd, Rh, Ru) and alloys (PtPd, PtRu) prepared under cyclic voltammetric conditions has been studied by in situ FTIR spectroscopy. The abnormal infrared effects (AIREs) have been explored as a novel and general phenomenon. The AIREs consist mainly in the inversion of the direction of IR band and the significant enhancement of IR absorption by adsorbed CO species. It was revealed that the enhanced IR absoroption of adsorbed species in AIREs depends strongly on the nature of metal or alloy, and on the structure and the …

Go to article

Electro-Oxidation Of Glyoxal To Glyoxalic Acid, Yin-Sheng Chen, Xin-Sheng Zhang, Jun Hu, Ying-Chun Dai Feb 2000

Electro-Oxidation Of Glyoxal To Glyoxalic Acid, Yin-Sheng Chen, Xin-Sheng Zhang, Jun Hu, Ying-Chun Dai

Journal of Electrochemistry

An investigation has been made to obtain the glyoxalic acid by the electrochemical oxidation of glyoxal solution with hydrochloric acid under various experimental conditions.The cell used consists of a lead cathode, a DSA anode and a cation-exchange membrane of model CM001. The current efficiency and yield for glyoxalic acid generation were 80.0% and 91.1% respectively, under optimal operating conditions: velocity of electrolyte flow 1.4 m·s-1 ,current density 450 A·m-2, temperature 30～40 ℃, initial concentration of glyoxal and hydrochloric acid 9.1%～16.0%, 4%～6%, respectively.

Go to article

Studies On Electrochemical Synthesis Of 4,5-Disubstituted-1,2- Benzoquinones And The Reaction Mechanism, Xian-Zhang Bu, Gui-Wu Xiao, Lin Ma, Xing-Chum He, Ling-Quan Gu Feb 2000

Studies On Electrochemical Synthesis Of 4,5-Disubstituted-1,2- Benzoquinones And The Reaction Mechanism, Xian-Zhang Bu, Gui-Wu Xiao, Lin Ma, Xing-Chum He, Ling-Quan Gu

Journal of Electrochemistry

The oxidation peak potentials (Ep) of alinine derivates and catechol in 0.1 mol/L KCl+15% alcohol solution were measured by cyclic voltammograms technique. The electrochemical oxidation condition was set according to the Ep. Three derivates of 4,5-disubstituted -1,2-benzoquinones were prepared via electrochemical oxidation-Michael addition reaction. The possible mechanism of electrochemical oxidation-Michael addition reaction is presented.

Go to article

Investigations Of Lithium Ion Battery Electrolyte Solution, Jing-Li Han, Qing-Guo Liu Feb 2000

Investigations Of Lithium Ion Battery Electrolyte Solution, Jing-Li Han, Qing-Guo Liu

Journal of Electrochemistry

Synthesis and electrochemical investigations of {LiB[(SO3)C6H3(O)(COO)]OC6H5} in EC/DMC or DMSO/PC mixtures are presented.

Go to article

Electrochemical Characterization Of Ir-Ta-Ti Metal Oxide Coated Titanium Anodes, Ting-Yong Wang, Li-Kun Xu, Guang-Zhang Chen Feb 2000

Electrochemical Characterization Of Ir-Ta-Ti Metal Oxide Coated Titanium Anodes, Ting-Yong Wang, Li-Kun Xu, Guang-Zhang Chen

Journal of Electrochemistry

Ir-Ta-Ti metal oxide coated titanium anodes of variable composition were prepared by thermal decomposition. Their micro morphorogies and electrochemical properties were characterized by scanning electron microscope, open circuit potential, cyclic voltammetry, consumption rate measurements and accelerated life test. The SEM results indicated that all coatings were of a porous and cracked-mud microstructure influenced greatly by the composition of coatings. The electrochemical measurements showed that the Ir-Ta-Ti ternary oxide-coated anodes exhibited excellent electrochemical activity and electrochemical stability in both acidic media and seawater which were affected by the composition and microstructure of the coatings. Owing to good corrosion resistance and low …

Go to article

The Study On Fabricating Thin Electrodes For Polymer Electrolyte Membrane Fuel Cells (Pemfc), Yong-Sheng Yang, Jing-Hua Liu, Chang-Peng Liu, Gong-Quan Sun, Chang-Zhi Li, Tian-Hong Lu Feb 2000

The Study On Fabricating Thin Electrodes For Polymer Electrolyte Membrane Fuel Cells (Pemfc), Yong-Sheng Yang, Jing-Hua Liu, Chang-Peng Liu, Gong-Quan Sun, Chang-Zhi Li, Tian-Hong Lu

Journal of Electrochemistry

To lower platinum loading in electrodes for polymer electrolyte membrane fuel cell, a new thin electrode fabrication technique (TEFT) was developed in this work. A series of low Pt loading electrodes with smooth and uniformed surface were fabricated by the TEFT. As a result, the maximum power density of the cell with platinum loading of 1 mg/cm2 and Nafion 117 membrane as electrolyte was up to 0.3 W.cm-2. Moreover, the effects of PTFE and Nafion content in cathodes on the performance of PEMFC with low Pt loading electrodes (1 mg Pt/cm2) were examined systematically.

Go to article

First Prev Next Last