Materials Science and Engineering Commons^™

Assessing Global Engagement Interventions To Advance Global Engineering Competence For Engineering Formation, Scott Schneider, Erick S. Vasquez-Guardado, Corinne Mowrey, Michael Moulton, Homero Murzi, Matthew A. Witenstein

Chemical and Materials Engineering Faculty Publications

This paper summarizes the work performed during the first year of a collaborative Research Initiation in Engineering Formation (RIEF) project focused on assessing the formation of a global learner mindset in engineering students through the use of different types of global engagement interventions without extended international travel. During this year the global engagement interventions have been developed, piloted, and assessed using the Global Engagement Survey (GES) and Global Engineering Competency Scale (GECS) instruments in a pre and post format. The assessment results helped the research team update the interventions and refine the assessment strategy, including the addition of new qualitative …

Work In Progress: Exploring The Impact Of International Experiences On The Development Of Students’ Entrepreneurial Mindset, Olgha Bassam Qaqish, Marcia Poole, William Pennock, Erick S. Vasquez-Guardado, Fahmidah Ummul Ashraf

Chemical and Materials Engineering Faculty Publications

International experiences, including collaborative online international learning (COIL) experiences that naturally increase accessibility, are of interest to many undergraduate students. These experiences provide educators a unique opportunity to develop a student's entrepreneurial mindset (EM). Additionally, hands-on experiences aligned with the National Academy of Engineering’s (NAE) grand challenge themes (Sustainability, Security, Health, and Joy of Living) support connections between the experience, disciplinary knowledge, multicultural awareness, and EM. Through this Work-in-Progress (WiP) study, we seek to answer: 1) How do international experiences influence undergraduate science and engineering students’ EM, and 2) How does the international experience modality (i.e., study abroad or COIL) …

Enhancing Entrepreneurial Minded Learning Of Process Control And Heat Transfer Concepts Using Micromoments And Concept Maps, Erick S. Vasquez-Guardado, Ricardo Gomez Gonzalez, Jean M. Andino, Nilza D. Aples, Xiaojing Yuan

Chemical and Materials Engineering Faculty Publications

The Entrepreneurially Minded Learning (EML) Framework seeks to infuse an Entrepreneurial Mindset in engineering students. The EML framework is founded on the 3 C’s principles of curiosity, connections, and creating value. Assessing EML efforts, however, is a well-known challenge for many engineering courses that do not have a design component. Through concept maps and micromoment activities, this work seeks to answer the following questions: Does implementing micromoment activities enhance students’ EML in two core areas of chemical engineering, i.e., heat transfer and process controls? A secondary research question is whether introducing a physical device in lectures enhances students’ EML. The …

Electrochemical Nitrate Reduction To Ammonia On Cu Based Nanoparticles Using Quantum Mechanical Simulations, Kathan Bhavin Shukla

Theses

Nitrate reduction to ammonia (NRA) is critical for environmental remediation and energy conservation, as it can remove harmful nitrate (NO₃^-) from water sources while producing usable ammonia (NH₃). Cu represents one of the most promising non-noble-metal NRA electrocatalysts. However, the intrinsic catalytic activity of Cu facets and their influence under different pH conditions remain unclear, particularly in the presence of ions commonly found in wastewater such as Cl^-, Na⁺, Mg²⁺, and Ca²⁺. Using density functional theory (DFT) calculations, we evaluated the nitrate reduction to ammonia (NRA) pathways …

Free And Forced Vibrations Of Elastically Restrained Cantilever With Lumped Oscillator, Alireza Babaei, Johné Parker, Paria Moshaver

Earth and Environmental Sciences Faculty Publications

The efficiency assessment of cantilever-based energy harvesters relies on vibrational analysis, which necessitates modi- fications aimed at enhancing efficiency. These modifications involve manipulating the fundamental frequency to lower values and encompassing a wider range of resonances within a specified bandwidth. Consequently, this paper introduces an original analytical-numerical exploration into the vibratory response of a cantilever with a novel boundary condi- tion involving an elastically restrained oscillator-spring arrangement. At the microbeam’s tip, an oscillator is elastically confined by a linear spring, resulting in a novel set of coupled governing equations and a distinct shearing boundary condition. Microbeam equations is derived from …

The Epitaxial Growth Of Ge And Gesn Semiconductor Thin Films On C-Plane Sapphire, Emmanuel Wangila, Calbi Gunder, Petro M. Lytvyn, Mohammad Zamani-Alavijeh, Fernando Maia De Oliveira, Serhii Kryvyi, Hryhorii Stanchu, Aida Sheibani, Yuriy I. Mazur, Shui-Qing Yu, Gregory J. Salamo

Physics Faculty Publications and Presentations

Ge_1−xSn_x growth on a new sapphire platform has been demonstrated. This involved the growth of GeSn on Ge/GaAs layers using the algorithm developed. The resultant growths of Ge on GaAs/AlAs/sapphire and Ge_1−xSn_x on Ge/GaAs/AlAs/sapphire were investigated by in situ and ex situ characterization techniques to ascertain the surface morphology, crystal structure, and quality. The growth mode of Ge on GaAs was predominantly two-dimensional (2D), which signifies a layer-by-layer deposition, contributing to enhanced crystal quality in the Ge/GaAs system. The growth of Ge_1−xSn_x with 10% Sn on a graded profile for 30 …

Development, 3d Printing, And Sintering Of Aluminum-Magnesium Alloy Pastes For In-Space Manufacturing Applications, Fatou Ndiaye

Electronic Theses and Dissertations

This study explores the additive manufacturing process of paste printing, sintering, and de-binding for fabricating aluminum-magnesium alloy components. The paste formulation involved combining aluminum powder with varying magnesium concentrations, utilizing acrylic polyol, solvent, and plasticizer to create a homogeneous mixture. Printing parameters were optimized to ensure continuous pressure for improved extrusion. Sintering conditions involved incremental temperature increases with nitrogen flow to remove solvents. Density measurements, tensile tests, and shrinkage calculations were conducted to assess part quality post-sintering. The study revealed significant improvements in part quality with 5 wt.% magnesium incorporation within aluminum, although density and tensile strength fell short of …

Surface Treatments' Effects On The Capacitor's Dielectric Performance Under Electro-Thermal Stresses, Haider. M. Umran, Feipeng Wang

Karbala International Journal of Modern Science

Biaxial-oriented polypropylene (BOPP) films are characterized by unfavorable aging behavior because of their poor susceptibility to high temperatures, humidity, and high electric fields. This makes them unqualified to withstand harsh operating conditions, such as in capacitor applications. This study investigates the impact of annealing BOPP samples at 100 °C for five hours after fluorination at different times (15, 30, and 60 minutes) on their electrical and mechanical performance under electro-thermal stresses. Scanning electron microscope (SEM) images confirm that there is an increase in surface roughness and the formation of a dense layer of fluorine-containing groups monotonically with fluorination time. So, …

Mechanical Characterization Of Hemp, Jute, And Flax Based Natural Fibre Composites For Non-Structural Applications In Aircraft And Automobiles, Ravi Kumar B

Theses and Dissertations

Demand for reducing energy consumption and detrimental environmental impacts after the effective lifetime of an engineering material are the major driving factors for the development of natural fibre reinforced composites (NFRCs) in various sectors. Compared to synthetic fibre like carbon-fibres or Kevlar, natural fibres provide several benefits including light weight, inexpensive, recyclability, superior specific strength, biodegradable, non-toxic during handling, and less energy intensive during manufacturing. This doctoral work presents observations from mechanical tests and interpretations on the suitability of natural fibre reinforced composites for less heavily loaded engineering applications areas.

In the first stage, jute, flax, and hemp fibres were …

Mechanical Characterization And Evaluation Of Additively Manufactured Titanium 5v-5mo-5al-3cr Alloy, Zachary Casias

Mechanical Engineering ETDs

Ti-5V-5Mo-5Al-3Cr (Ti-5553) is a near beta titanium alloy commonly used in aerospace applications. It is currently being explored for additive manufacturing (AM), but the fatigue behavior of this AM alloy needs to be well-understood for adoption in aerospace applications. The present work examines the tensile and fatigue behavior of LPBF manufactured Ti-5553. The effect of post-print heat treatments, effects of surface roughness, and print defects on the mechanical properties of AM Ti-5553 were also evaluated. Fatigue lives of as-LPBF and BAA material are nearly identical, and both are far below the fatigue lives of conventionally manufactured Ti-5553 of 350 MPa. …

A Guide To Fifty Years Of Research At Montana Tech: Part 3-Decontamination Of Ratioactively Contaminated Steel By Melt Refining/Slagging Processing, Larry G. Twidwell, Samuel A. Worcester

Metallurgy

This presentation includes a discussion of the research conducted at Montana Tech in the Department of Metallurgical and Materials Engineering. The discussion is focused on Decontamination of Radioactively Contaminated Steel by Melt Refining/Slagging. This presentation is based on the research of Master of Science graduate students, industrial and academic colleagues, at the Montana College of Mineral Science and Technology (which morphed to Montana Tech [1977], then to Montana Tech of The University of Montana [2000], then to Montana Technological University [2019]). The referenced work of each of the graduate students in this presentation is gratefully acknowledged. The following summary presentation …

Testing Of Recycled Polypropylene As A Viable Structural Material (Quarter 2), Isabella Jimenez-Melendrez, Katherine Timbes, Jocelyn Embleton, Tauni Dela Cruz, Zyra Kingston, Emily Byrd, Jacob Stinger

Architectural Engineering

5.25 trillion plastic particles have been found in the oceans each year, 3 million water bottles are consumed each hour, and one million plastic bags are used each minute in the United States of America (Williams). The vast majority of conventional plastics such as polyethylene, polypropylene, polystyrene, and more, are non-biodegradable (Tokiwa). To make matters worse, 70% of this non-biodegradable plastic is discarded into landfills and inevitably makes its way into the environment (Williams,). Plastic products have become vital to the United States economy due to their many uses in the construction, packaging, transportation, and health care industries. However, this …

The Interplay Of Spin, Charge, And Heat: From Metal/Insulator Heterostructures To Perovskite Bilayers, Sam M. Bleser

Electronic Theses and Dissertations

In this dissertation begin with an investigation of non-local spin transport in an amorphous germanium (a-Ge) sample via the inverse spin Hall effect (ISHE). In that study we show that commonly used techniques such as differential conductance and delta mode of a paired Keithley 6221/2182a for non-local resistance measurements can lead to false indicators of spin transport. Next, we turn out attention to a thickness dependent study in thermally-evaporated chromium (Cr) thin films on a bulk polycrystalline yttrium-iron-garnet (YIG) substrate. This project analyzed the spin transport in the Cr films versus thickness via the longitudinal spin Seebeck effect (LSSE). This …

Finite Element Analysis Of Thermal-Mechanical Instabilities In Nonmetallic Friction Composite Material, Joseph-Shaahu Shaahu

Electronic Theses and Dissertations

Thermal-mechanical instability (TMI) has been a research topic of interest as it focuses a lot on transportation systems. Thermal-mechanical instability was first noticed in railway and experimentally studied with a pin-to-pin or pin-to-surface setup of sliding contact. The topic has been extended into brakes and clutches which are two of the most common sliding systems most susceptible to thermal buckling and thermoelastic instability (TEI), where thermal buckling and thermoelastic instability are two sub-categories of thermal-mechanical instability. Thermal-mechanical instability is an ongoing research to better understand the phenomenon and the limits at which such instability occurs. This work delved into the …

A Bayesian Approach For Lifetime Modeling And Prediction With Multi-Type Group-Shared Missing Covariates, Hao Zeng, Xuxue Sun, Kuo Wang, Yuxin Wen, Wujun Si, Mingyang Li

Engineering Faculty Articles and Research

In the field of reliability engineering, covariate information shared among product units within a specific group (e.g., a manufacturing batch, an operating region), such as operating conditions and design settings, exerts substantial influence on product lifetime prediction. The covariates shared within each group may be missing due to sensing limitations and data privacy issues. The missing covariates shared within the same group commonly encompass a variety of attribute types, such as discrete types, continuous types, or mixed types. Existing studies have mainly considered single-type missing covariates at the individual level, and they have failed to thoroughly investigate the influence of …

Applicability Of Using Bio-Receptive Concrete For Building Facades In Egypt, Gina Roupheil

Theses and Dissertations

The significant increase in carbon dioxide emissions caused by the construction industry is detrimental to our planet. This is rapidly increasing with the urbanization of cities that is gradually taking its toll on the available green spaces, which help in balancing such emissions. Recently, researchers have been trying to make use of bio-receptivity to create biomaterial systems that could be spread on building envelopes and support the growth of small plant species and microorganisms to establish on. Out of those materials, comes the concrete as a promising material for bio-colonization.

Within this context, this study aims at investigating the applicability …

A Study On High-Frequency Bending Fatigue, Microhardness, Tensile Strength, And Microstructure Of Parts Made Using Atomic Diffusion Additive Manufacturing (Adam) And Additive Friction Stir Deposition (Afsd), Hamed Ghadimi

LSU Doctoral Dissertations

This dissertation reports the findings of several studies on the mechanical and microstructural properties of parts made using atomic diffusion additive manufacturing (ADAM) and additive friction stir deposition (AFSD). The design of a small-sized bending-fatigue test specimen for an ultrasonic fatigue testing system is reported in Chapter 1. The design was optimized based on the finite element analysis and analytical solution. The stress–life (S–N) curve is obtained for Inconel alloy 718. Chapter 2 presents the findings of ultrasonic bending-fatigue and tensile tests carried out on the ADAM test specimens. The S-N curves were created in the very high-cycle fatigue regime. …

Experimental Thermal Conductivity Studies Of Agar-Based Aqueous Suspensions With Lignin Magnetic Nanocomposites, Bishal Gautam, Saja M. Nabat Al-Ajrash, Mohammad Jahid Hasan, Abhishek Saini, Sarah J. Watzman, Esteban Ureña-Benavides, Erick S. Vasquez-Guardado

Chemical and Materials Engineering Faculty Publications

Nanoparticle additives increase the thermal conductivity of conventional heat transfer fluids at low concentrations, which leads to improved heat transfer fluids and processes. This study investigates lignin-coated magnetic nanocomposites (lignin@Fe₃O₄) as a novel bio-based magnetic nanoparticle additive to enhance the thermal conductivity of aqueous-based fluids. Kraft lignin was used to encapsulate the Fe₃O₄ nanoparticles to prevent agglomeration and oxidation of the magnetic nanoparticles. Lignin@Fe₃O₄ nanoparticles were prepared using a pH-driven co-precipitation method with a 3:1 lignin to magnetite ratio and characterized by X-ray diffraction, FT-IR, thermogravimetric analysis, and transmission electron …

Synthesis Of Ni-Based Intermetallics By Electrolytic Plasma Processing Of Ti And Ti-Based Alloys, Chuzhong Zhang

Material Science and Engineering Dissertations - Archive

EPP is an innovative surface modification technique that enables the deposition of metal ions from the electrolyte and their integration with substrate atoms to form intermetallic compound surface layers. EPP offers advantages such as high deposition rates, environmental cleanliness, and operational simplicity. In this study, Ni-Ti intermetallic layers were successfully synthesized on a Ti-6Al-4V substrate using EPP. The properties of the resulting Ni-Ti intermetallic layers were characterized using SEM, EDS, XRD, TEM, nanoindentation, and tribology tests.

This work aims to understand the fabrication mechanism and investigate the effects of various processing parameters on the EPP process. Key factors such as …

Quantitative Modeling Of Micro Discharge And Oxide Growth In Plasma Electrolytic Oxidation Of Titanium, Kingsley I. Ochiabuto

Material Science and Engineering Dissertations - Archive

Plasma electrolytic oxidation (PEO) has been extensively applied in the past to improve the tribological properties of titanium and its alloys allowing their widespread use in industrial applications. However, the complete PEO mechanism of action remains unclear. While there are several mathematical models providing useful insights into the PEO process, they do not fully incorporate the effect of applied potential on the outcomes of PEO. In this work, we develop an experimentally informed computational model by expanding on the dielectric breakdown model. We incorporate experimental data to extract key parameters, exploring the iterative dependency of the oxide thickness and ionic …

Effect Of Admixtures On Rapid Hardening, Self-Consolidating Concrete, Haley Johnson

Theses and Dissertations--Civil Engineering

Self-consolidating, rapid-hardening concrete is a sought-after product in the market now, however the effects of admixtures on fresh and hardened concrete rheology are still uncertain. This study aims to create a self-consolidating concrete (SCC) using calcium sulfoaluminate (CSA) cement for its rapid-hardening properties, and tests two set time retarders and two viscosity-modifying admixtures (VMAs) to determine how they affect the properties of concrete. The properties studied in this thesis are workability, viscosity, set times, air content, compressive strength, and freeze-thaw resistance of self-consolidating concrete. It was found that tartaric acid creates a very workable SCC with consistent results regardless of …

Advancing Combinatorial Screening Of Refractory High Entropy Alloys Through Intrinsic Ductility Assessment Via Thin Film Fragmentation Testing, Taohid Bin Nur Tuhser

Theses and Dissertations--Chemical and Materials Engineering

High Entropy Alloys (HEAs), also known as Multiprincipal Element Alloys (MPEAs), represent a paradigm shift in alloy design. Unlike traditional practices that limit compositions to the edges of phase diagrams, HEAs exploit equiatomic mixing of five or more elements at the center of phase diagrams to maximize configurational entropy. This unconventional approach exponentially expands the spectrum of potential alloy compositions, rendering conventional experimental methods inadequate for exploring this extensive compositional space.

In response to these challenges, the scientific community has shown a growing interest in high-throughput techniques, encompassing both computational and experimental domains. Particularly, Refractory High Entropy Alloys (RHEAs) have …

Degree Of Dispersion/Exfoliation And Surface Functionalization Of 1d And 2d Carbon Nanostructured Materials: Interface Interactions And Effects On Mechanical Properties, Michail Margas

Material Science and Engineering Dissertations - Archive

The development of advanced cementitious nanocomposites relies heavily on understanding the interfacial interactions between carbon-based nanomaterials and the cement matrix, which significantly influence the material’s performance. The goal of this dissertation is to investigate the effect of dispersion/exfoliation and surface functionalization of 1D multiwall carbon nanotubes (MWCNTs), carbon nanofibers (CNFs), and 2D graphene nanoplatelets (GNPs) in aqueous suspensions on the interface interactions of nanoengineered cementitious composites. The first objective of this dissertation is to quantitatively evaluate the degree of nanomaterial dispersion for MWCNT and CNF suspensions, in a converging manner for cement-based materials applications using spectroscopic techniques, such as UV-vis …

Investigation Of Space Charge Effects On Co2 Electrocatalytic Reduction On Gd-Doped Ceria Via Scanning Kelvin Probe And Model-Based Bayesian Analysis, Alejandro Mejia

Graduate Theses, Dissertations, and Problem Reports (ETD)

In studying novel energy conversion and storage systems, such as high-temperature electrolysis, numerous underlying fundamental physical processes remain unclear or inadequately understood. Among these, the modeling and comprehension of surface reaction mechanisms, coupled with the intricate effects of space‑charge interfaces, remains an unclear and challenging area of research.

The work of this dissertation involves the development of a 2D finite element analysis model, leveraging the robust MOOSE framework from INL. This model, featuring inhomogeneous defect thermodynamics for near-surface chemistry, formulated through Poisson‑Cahn variational theory, has been exploited for studying the electrocatalytic reduction of CO₂ on gadolinia doped ceria. The …

Data-Driven Modeling Of Oxygen Kinetics In La0.6sr0.4co0.2fe0.8o3−Δ (Lscf) For High-Temperature Reduction Of Co2 In An Electrolysis Cell, Ferron Campbell

Graduate Theses, Dissertations, and Problem Reports (ETD)

Electrolysis systems are critical to several societal applications, particularly energy storage and conversion. Developing these systems requires a detailed knowledge of the chemistry and thermodynamics of the materials used in the electrolysis cell. This work focuses on using embedded scientific machine learning as an efficient way to build an interpretable model for the reaction and transport kinetics in the LSCF electrode, whose performance directly influences the electrolysis system’s performance. The models developed in this study are trained using the publicly available machine learning package, FoKL-GP. This package incorporates a robust Gibbs sampler that employs a forward variable selection process to …

Processing, Stability, And High-Temperature Properties Of Doped Lacro3-Based Refractory Ceramics And Composites For Harsh Environments Sensing Applications, Javier A. Mena

Graduate Theses, Dissertations, and Problem Reports (ETD)

In order to test and monitor the operational stability and conditions of various energy, transportation, and manufacturing systems and their components, accurate sensors capable of operating at temperatures over 1000 °C in various environments for long durations are required. In addition, many of these harsh environmental systems do not permit sensors to be directly inserted into the environment, so the sensors need to be embedded into the surrounding support or thermal protective materials. Some technological and industrial applications that require the use of harsh environment conditions sensing include nuclear and chemical reactors, jet engines, heavyduty gas turbines, rotating bearings in …

Robot-Based 3d Printing, Aaron Hoffman

Williams Honors College, Honors Research Projects

Details of a large-format 3D printer created to print experimental materials, test multi-axis print techniques, and quickly print large objects. The printer consists of a 7-axis robotic arm and pellet extruder, which are controlled by a PC. Experimental materials such as recycled polymers or carbon-fiber reinforced materials can be easily tested with the pellet format of the extruder. The printer can perform different printing techniques and can be used to experiment with material properties when using these techniques with different polymers. The print surface is around 5 times larger than the average commercial 3D printer, and the robotic arm provides …

Laser Deposition Additive Manufacturing Of Multi-Material And Metal-Ceramic Composite Structures, Manikanta Grandhi

Graduate Theses, Dissertations, and Problem Reports (ETD)

The increasing performance requirements of modern industrial systems, coupled with the imperative for decarbonization, necessitate a fundamental rethinking of metallic component design and manufacturing. Traditional materials, with their inherent limitations in property optimization, susceptibility to degradation, and weight constraints, are proving insufficient. Multi-material joining offers a potential solution, enabling designers to strategically integrate diverse materials with specific, tailored properties into single component. Functionally graded materials (FGMs) and oxide dispersion strengthened (ODS) materials are prime examples of this approach, delivering substantial improvements in wear resistance, thermal regulation, high-temperature resilience, and overall weight efficiency. However, conventional manufacturing approaches further exacerbate the limitations …

Machine-Learning-Assisted Design Of Deep Eutectic Solvents Based On Uncovered Hydrogen Bond Patterns, Usman Lame Abbas, Yuxuan Zhang, Joseph Tapia, Md Selim, Jin Chen, Jian Shi, Qing Shao

Markey Cancer Center Faculty Publications

Non-ionic deep eutectic solvents (DESs) are non-ionic designer solvents with various applications in catalysis, extraction, carbon capture, and pharmaceuticals. However, discovering new DES candidates is challenging due to a lack of efficient tools that accurately predict DES formation. The search for DES relies heavily on intuition or trial-and-error processes, leading to low success rates or missed opportuni- ties. Recognizing that hydrogen bonds (HBs) play a central role in DES formation, we aim to identify HB features that distinguish DES from non-DES systems and use them to develop machine learning (ML) models to discover new DES systems. We first analyze the …

Investigation Of Mechanically Fatigue Low-Frequency Energy Harvesting Effects On Isotropic Materials, Daniel J. Meade

College of Graduate Studies: Theses & Dissertations

This research project reports an exploratory investigation of energy harvesting effect on isotropic material that goes through low frequency mechanical fatigue. Energy harvesting is a growing field of study that can recycle ambient energy back into a system that would otherwise be lost. This is a significantly useful method for the ongoing energy crisis and provides an alternate route to design and upgrade systems to be more efficient and last longer than current system designs. However, it is time to investigate if there is any effect vibration-based energy harvesting has on the structure from which energy is being harvested. To …