Open Access. Powered by Scholars. Published by Universities.®

Materials Science and Engineering Commons™

Open Access. Powered by Scholars. Published by Universities.®

Nanoscience and Nanotechnology

Institution
Keyword
Publication Year
Publication
Publication Type
File Type

Articles 751 - 780 of 988

Full-Text Articles in Materials Science and Engineering

The Design And Manufacture Of A Microfluidic Reactor For Synthesis Of Cadmium Selenide Quantum Dots Using Silicon And Glass Substrates, Peter Gonsalves Jun 2011

The Design And Manufacture Of A Microfluidic Reactor For Synthesis Of Cadmium Selenide Quantum Dots Using Silicon And Glass Substrates, Peter Gonsalves

Materials Engineering

A microfluidic reactor for synthesizing cadmium selenide (CdSe) quantum dots (QDs) was synthesized out of silicon and Pyrex glass. Microfabrication techniques were used to etch the channels into the silicon wafer. Holes were wet-drilled into Pyrex glass using a diamond-tip drill bit. The Pyrex wafer was aligned to the etched silicon wafer and both were anodically bonded to complete the microfluidic reactor. Conditions for anodic bonding were created by exposing the stacked substrates to 300V at ~350oC under 5.46N of force.  Bulk CdSe solution was mixed at room temperature and treated as a single injection. The syringe containing …

Go to article

The Flip-Flop Behavior Of Acetonitrile At Au Electrode Surface Investigated By Sum Frequency Generation Vibrational Spectroscopy, Zhi Huang, Xin Tang, Gang-Hua Deng, En-Cai Zhou, Hong-Fei Wang, Yuan Guo May 2011

The Flip-Flop Behavior Of Acetonitrile At Au Electrode Surface Investigated By Sum Frequency Generation Vibrational Spectroscopy, Zhi Huang, Xin Tang, Gang-Hua Deng, En-Cai Zhou, Hong-Fei Wang, Yuan Guo

Journal of Electrochemistry

The electrochemical interface between liquid acetonitrile and polycrystal gold electrode is investigated by in situ infrared visible sum frequency generation spectroscopy (SFG-VS). The structure of acetonitrile adsorbed at polycrystal gold electrode surface is studied as a function of electrode potential. The SFG spectra of CH3 group indicate acetonitrile orients in response to the electrode potential. The SFG signal of CH3 group turns lower as the electrode potential changes from -700mV to 300mV, and vanishes around the 300mV(pzc), then becomes a negative signal above 500mV, which indicates that the orientation is predominately with the CH3 group toward the …

Go to article

Synthesis And Catalytic Property Of Flaked Spindle-Like Cuo Nanocrystals, Jian-Feng Fan, Li-Qing Li, Yu-Feng Huang, Lou-Zhen Fan May 2011

Synthesis And Catalytic Property Of Flaked Spindle-Like Cuo Nanocrystals, Jian-Feng Fan, Li-Qing Li, Yu-Feng Huang, Lou-Zhen Fan

Journal of Electrochemistry

A simple and efficient electrochemical route was developed for the synthesis of flaked spindle-like CuO nanocrystals using aqueous electrolyte and Cu sacrificial anode (graphite as the cathode) in an undivided cell at a constant potential mode under room temperature. The morphologies, structure and component of CuO nanocrystals obtained were characterized by SEM, XRD, respectively. Flaked spindle-like CuO nanocrystals were successfully used to modify a GC electrode to detect H2O2 with cyclic voltammetry (CV) and amperometric (AC).The results showed that products were pure monoclinic CuO nanocrystals. The linear range for the determination of hydrogen peroxide is from 1.0 …

Go to article

Influence Of Tert-Butylpyridine On The Band Energetics Of Nanostructured Tio2 Electrodes And The Photoelectrochemical Properties Of Dye-Seneitized Electrodes, Shu-Ming Yang, Ji-Chao Wang, Hui-Zhi Kou, Hong-Bin Xue, Hong-Jun Wang, Yu-Ling Guo May 2011

Influence Of Tert-Butylpyridine On The Band Energetics Of Nanostructured Tio2 Electrodes And The Photoelectrochemical Properties Of Dye-Seneitized Electrodes, Shu-Ming Yang, Ji-Chao Wang, Hui-Zhi Kou, Hong-Bin Xue, Hong-Jun Wang, Yu-Ling Guo

Journal of Electrochemistry

The flat band edges (Efb) of nanostructured TiO2 electrodes in electrolyte solutions with tert-butylpyridine (TBP) of different concentrations have been determined with spectroelectrochemical technique. TBP played a role in band energetics of nanostructured TiO2 electrodes. The Efb values of -2.25, -2.46 and -2.62 V were determined in three 0.2 mol•L-1 tetrabutylammonium perchlorate (TBAP) acetonitrile electrolytes which contain 0, 0.2 and 0.4 mol•L-1 TBP respectively. The addition of Li+ ions shifted Efb positively. The Efb values of -1.12, -1.22 and -1.30 V were determined in three 0.2 mol•L-1 LiClO4 acetonitrile electrolytes which contain 0, 0.2 …

Go to article

Dft Study Of Co2 Reduction To Hydrocarbons On Cu Surfaces, Li-Hui Ou, Sheng-Li Chen May 2011

Dft Study Of Co2 Reduction To Hydrocarbons On Cu Surfaces, Li-Hui Ou, Sheng-Li Chen

Journal of Electrochemistry

CO2 reduction on Cu(111) single crystal surfaces was studied using DFT calculations on the reaction energies and the minimum energy paths. The results indicated that the possible reaction paths for CO2 reduction on Cu(111) surface are CO2(g) + H* → COOH* → (CO +OH)*, (CO + H)* → CHO*, CHO + H → CH2O* → (CH2+O)*, CH2* + 2H* → CH4 or 2CH2* → C2H4. On Cu(111) surface, the reaction rate is controlled by steps of CH2O* → (CH2 …

Go to article

A Titanium-Supported Nanoporous Pd Electrocatalyst For Methanol Oxidation, Feng-Juan Niu, Qing-Feng Yi Feb 2011

A Titanium-Supported Nanoporous Pd Electrocatalyst For Methanol Oxidation, Feng-Juan Niu, Qing-Feng Yi

Journal of Electrochemistry

Titanium-supported nanoporous palladium electrode(nanoPd /Ti) was prepared by a hydrothermal process in the presence of the ligand EDTA and using formaldehyde as reducing agent.SEM images showed that the size of Pd particles was about 60 nm and the Pd particles were connected with each other to form a three-dimensional network structure.Cyclic voltammetry(CV) and electrochemical impedance spectroscopy(EIS) were applied to evaluate the electrocatalytic activity of the nanoPd/Ti electrode towards methanol oxidation in alkaline solution.CV results showed that the nanoPd /Ti electrode presented high anodic peak densities and a low onset potential for methanol oxidation.Also nanoPd /Ti electrode showed excellent CO tolerance …

Go to article

Electrocatalytic Oxidation Of Hydrazine At Rutin Carbon Nanotubes Modified Electrode, Hong-Fang Zhang, Qing-Lin Sheng, Jian-Bin Zheng Feb 2011

Electrocatalytic Oxidation Of Hydrazine At Rutin Carbon Nanotubes Modified Electrode, Hong-Fang Zhang, Qing-Lin Sheng, Jian-Bin Zheng

Journal of Electrochemistry

The electrochemical behavior and electrocatalytic oxidation of hydrazine on rutin multiwall carbon nanotubes modified glassy carbon electrode were studied by cyclic voltammetry.The experimental results indicated that the electrode exhibits good electrocatalytic activity to hydrazine at a reduced oxidation potential of 262 mV.The amperometric response of the modified electrode showed linear increase after successive addition of hydrazine in the concentration range of 2.5×10-6~1.0×10-4 mol·L-1 with a detection limit of 5×10-7 mol·L-1.

Go to article

Applications Of Raman Spectroscopy Technique In Lithium Ion Batteries, Liang Zhao, Yong-Sheng Hu, Hong Li, Zhao-Xiang Wang, Hong-Xing Xu, Xue-Jie Huang, Li-Quan Chen Feb 2011

Applications Of Raman Spectroscopy Technique In Lithium Ion Batteries, Liang Zhao, Yong-Sheng Hu, Hong Li, Zhao-Xiang Wang, Hong-Xing Xu, Xue-Jie Huang, Li-Quan Chen

Journal of Electrochemistry

The Raman spectroscopy has been widely used in the study of lithium ion batteries.In this short review,we gave some examples of the applications of Raman spectroscopy in the study of electrode materials including carbonaceous materials,spinel LiMxMn2-x O4,LiFePO4,as well as polymer electrolytes,room temperaturemolten salt electrolytes and the solid-electrolyte interphase layers.The advantages and disadvantages of the ex-situ and in-situ Raman spectrum techniques are discussed.Using new Raman techniques to investigate Li-ion batteries are suggested.

Go to article

Modeling Diverse Physics Of Nanoparticle Self-Assembly In Pulsed Laser-Irradiated Metallic Films, Mikhail Khenner Jan 2011

Modeling Diverse Physics Of Nanoparticle Self-Assembly In Pulsed Laser-Irradiated Metallic Films, Mikhail Khenner

Mathematics Faculty Publications

Presents physics behind dewetting of thin liquid films and mathematical/computational modeling tools (Educational/Research presentation for senior physics majors).

Go to article

Stability Of A Strongly Anisotropic Thin Epitaxial Film In A Wetting Interaction With Elastic Substrate, Mikhail Khenner, Wondimu T. Tekalign, Margo S. Levine Jan 2011

Stability Of A Strongly Anisotropic Thin Epitaxial Film In A Wetting Interaction With Elastic Substrate, Mikhail Khenner, Wondimu T. Tekalign, Margo S. Levine

Mathematics Faculty Publications

The linear dispersion relation for longwave surface perturbations, as derived by Levine et al. Phys. Rev. B 75, 205312 (2007) is extended to include a smooth surface energy anisotropy function with a variable anisotropy strength (from weak to strong, such that sharp corners and slightly curved facets occur on the corresponding Wulff shape). Through detailed parametric studies it is shown that a combination of a wetting interaction and strong anisotropy, and even a wetting interaction alone results in complicated linear stability characteristics of strained and unstrained films.

Go to article

Stability Of A Strongly Anisotropic Thin Epitaxial Film In A Wetting Interaction With Elastic Substrate, Mikhail Khenner, Wondimu Tekalign, Margo Levine Jan 2011

Stability Of A Strongly Anisotropic Thin Epitaxial Film In A Wetting Interaction With Elastic Substrate, Mikhail Khenner, Wondimu Tekalign, Margo Levine

Mathematics Faculty Publications

The linear dispersion relation for longwave surface perturbations, as derived by Levine et al. Phys. Rev. B 75, 205312 (2007) is extended to include a smooth surface energy anisotropy function with a variable anisotropy strength (from weak to strong, such that sharp corners and slightly curved facets occur on the corresponding Wulff shape). Through detailed parametric studies it is shown that a combination of a wetting interaction and strong anisotropy, and even a wetting interaction alone results in complicated linear stability characteristics of strained and unstrained films.

Go to article

Preparation And Characterization Of Iron Oxide And Hydroxide Based Nanomaterials, Guillermo Carbajal Franco Jan 2011

Preparation And Characterization Of Iron Oxide And Hydroxide Based Nanomaterials, Guillermo Carbajal Franco

Open Access Theses & Dissertations

Iron (Fe) oxides and hydroxides are common and abundant materials. They exhibit diverse crystal structures, properties and phenomena by virtue of which they find a wide range of scientific and technological applications. Controlled growth and manipulation of the specific structure and electronic behavior to meet the requirements of a given application is a challenging problem in view of many possible phases and composition of the resulting materials. The preparation method and experimental conditions will, therefore, significantly affect the properties and performance of Fe oxides and hydroxides. The goal of the project is to obtain Fe-based oxide/hydroxide catalytic materials and to …

Go to article

Effects Of Radiation-Induced Carbon Contamination On The Printing Performance Of Extreme Ultraviolet Masks, Yu-Jen Fan Jan 2011

Effects Of Radiation-Induced Carbon Contamination On The Printing Performance Of Extreme Ultraviolet Masks, Yu-Jen Fan

Legacy Theses & Dissertations (2009 - 2024)

This dissertation investigates one of the remaining issues for extreme ultraviolet (EUV) lithography, the effects of radiation induced carbon contamination on the printing performance of patterned EUV masks. The impact of carbon contamination on EUV masks is significant due to the throughput loss and potential effects on imaging performance, and occurs when multilayer surfaces are exposed to EUV radiation with residual carbonaceous species present. Current carbon contamination research is primarily focused on the lifetime of the multilayer surfaces, determined by reflectivity loss and reduced throughput in EUV exposure tools. However, contamination on patterned EUV masks can cause additional effects on …

Go to article

Effects Of Low Energy E-Beam Irradiation On Graphene And Graphene Field Effect Transistors And Raman Metrology Of Graphene On Split Gate Test Structures, Gayathri Rao Jan 2011

Effects Of Low Energy E-Beam Irradiation On Graphene And Graphene Field Effect Transistors And Raman Metrology Of Graphene On Split Gate Test Structures, Gayathri Rao

Legacy Theses & Dissertations (2009 - 2024)

Apart from its compelling performance in conventional nanoelectronic device geometries, graphene is an appropriate candidate to study certain interesting phenomenon (e.g. the Veselago lens effect) predicted on the basis of its linear electron dispersion relation. A key requirement for the observation of such phenomenon in graphene and for its use in conventional field-effect transistor (FET) devices is the need to minimize defects such as consisting of - or resulting from - adsorbates and lattice non-uniformities, and reduce deleterious substrate effects. Consequently the investigation of the origin and interaction of defects in the graphene lattice is essential to improve and tailor …

Go to article

Synthesis, Processing And Characterization Of Silicon-Based Templated Nanowires, Jae Ho Lee Jan 2011

Synthesis, Processing And Characterization Of Silicon-Based Templated Nanowires, Jae Ho Lee

Legacy Theses & Dissertations (2009 - 2024)

Semiconductor and metallic nanowires have attracted substantial attention due to their wide variety of applications, ranging from nanoelectronics to energy storage devices. In particular, self-assembled silicon nanowires (SiNWs) may be an attractive alternative to conventionally processed planar silicon since SiNWs can potentially function as both the switch (i.e. transistor) and local interconnect (e.g. metal silicide nanowire) to form an inherently integrated nanoelectronic system. Also, hierarchical (branched) nanowire systems hold potential for catalysts or porous electrode applications for energy applications

Go to article

Applying X-Ray Microscopy And Finite Element Modeling (Fem) To Identify The Mechanism Of Stress-Assisted Void Growth In Through Silicon Via (Tsv), Lay Wai Kong Jan 2011

Applying X-Ray Microscopy And Finite Element Modeling (Fem) To Identify The Mechanism Of Stress-Assisted Void Growth In Through Silicon Via (Tsv), Lay Wai Kong

Legacy Theses & Dissertations (2009 - 2024)

Fabricating through-silicon vias (TSVs) is challenging, especially for conformally filled TSVs, often hampered by the seam line and void inside the TSVs. Stress-assisted void growth in TSVs has been studied by finite element stress modeling and X-ray computed tomography (XCT). Because X-ray imaging does not require TSVs to be physically cross-sectioned, the same TSV can be imaged before and after annealing. Using 8 keV laboratory-based XCT, voids formed during copper electroplating are observed in as-deposited samples and void growth is observed at the void location after annealing. We hypothesize that the mechanism generating voids is hydrostatic stress-assisted void growth. Stresses …

Go to article

Electron-Phonon Interactions And Quantum Confinement Effects On Optical Transitions In Nanoscale Silicon Films, Vimal Kumar Kamineni Jan 2011

Electron-Phonon Interactions And Quantum Confinement Effects On Optical Transitions In Nanoscale Silicon Films, Vimal Kumar Kamineni

Legacy Theses & Dissertations (2009 - 2024)

Theoretical studies have attributed the temperature dependence of the linear optical response (dielectric function) of bulk semiconductors to electron-phonon interactions and thermal expansion of the lattice. However, the role of phonons in the optical properties of nanoscale structures is often overlooked. This thesis systematically investigates the impact of both carrier confinement and electron-phonon interactions using nanoscale films of silicon in crystalline silicon quantum wells (c-Si QW). Spectroscopic ellipsometry (SE) is a linear optical technique used to of extract the dielectric function and thickness of very thin films. X-ray reflectivity (XRR) was used as the complementary thickness metrology method. The dielectric …

Go to article

Investigation Of Novel Alumina Nanoabrasive And The Interactions With Basic Chemical Components In Copper Chemical Mechanical Planarization (Cmp) Slurries, Shravanthi Lakshmi Manikonda Jan 2011

Investigation Of Novel Alumina Nanoabrasive And The Interactions With Basic Chemical Components In Copper Chemical Mechanical Planarization (Cmp) Slurries, Shravanthi Lakshmi Manikonda

Legacy Theses & Dissertations (2009 - 2024)

Chemical mechanical planarization (CMP) is an enabling process technology for IC fabrication to maintain global planarity across the wafer to satisfy lithographic depth of focus constraints. It also enables integration of materials that cannot be anisotropically etched, such as Cu. CMP utilizes nanoparticle abrasives in aqueous slurry to aid in planarization.

Go to article

Energy Band Engineering Using Polarization Induced Interface Charges In Mocvd Grown Iii-Nitride Heterojunction Devices, Neeraj Tripathi Jan 2011

Energy Band Engineering Using Polarization Induced Interface Charges In Mocvd Grown Iii-Nitride Heterojunction Devices, Neeraj Tripathi

Legacy Theses & Dissertations (2009 - 2024)

Characteristics of III-nitride based heterojunction devices are greatly influenced by the presence of high density of polarization induced interface charges. Research undertaken in the current doctoral thesis demonstrates the effect of presence of one, three and six sheets of polarization induced charges in three different III-nitride based devices, namely in a photocathode, a high electron mobility transistor (HEMT) and a hyperspectral detector structure. Through a systematic set of experiments and theoretical modeling an in-depth study of the interaction between multiple sheets of polarization induced charges and their impact on energy band profile was undertaken. Various device designs were studied and …

Go to article

Development Of High Band Gap Absorber And Buffer Materials For Thin Film Solar Cell Applications, Daniel Dwyer Jan 2011

Development Of High Band Gap Absorber And Buffer Materials For Thin Film Solar Cell Applications, Daniel Dwyer

Legacy Theses & Dissertations (2009 - 2024)

CuInGaSe2 (CIGS) device efficiencies are the highest of the thin film absorber materials (vs. CdTe, α-Si, CuInSe2). However, the band gap of the highest efficiency CIGS cells deviates from the expected ideal value predicted by models. Widening the band gap to the theoretically ideal value is one way to increase cell efficiencies. Widening the band gap can be accomplished in two ways; by finding a solution to the Ga-related defects which limit the open circuit voltage at high Ga ratios, or by utilizing different elemental combinations to form an alternative high band gap photoactive Cu-chalcopyrite (which includes …

Go to article

Precise Control Of Highly Ordered Arrays Of Nested Semiconductor/Metal Nanotubes, Diefeng Gu, Helmut Baumgart, Kandabara Tapily, Pragya Shrestha, Gon Namkoong, Xianyu Ao, Frank Müller Jan 2011

Precise Control Of Highly Ordered Arrays Of Nested Semiconductor/Metal Nanotubes, Diefeng Gu, Helmut Baumgart, Kandabara Tapily, Pragya Shrestha, Gon Namkoong, Xianyu Ao, Frank Müller

Electrical & Computer Engineering Faculty Publications

Lithographically defined microporous templates in conjunction with the atomic layer deposition (ALD) technique enable remarkable control of complex novel nested nanotube structures. So far three-dimensional control of physical process parameters has not been fully realized with high precision resolution, and requires optimization in order to achieve a wider range of potential applications. Furthermore, the combination of composite insulating oxide layers alternating with semiconducting layers and metals can provide various types of novel applications and eventually provide unique and advanced levels of multifunctional nanoscale devices. Semiconducting TiO2 nanotubes have potential applications in photovoltaic devices. The combination of nanostructured semiconducting materials …

Go to article

Nonuniformity In Lattice Contraction Of Bismuth Nanoclusters Heated Near Its Melting Point, A. Esmail, M. Abdel-Fattah, Hani E. Elsayed-Ali Jan 2011

Nonuniformity In Lattice Contraction Of Bismuth Nanoclusters Heated Near Its Melting Point, A. Esmail, M. Abdel-Fattah, Hani E. Elsayed-Ali

Electrical & Computer Engineering Faculty Publications

The structural properties of bismuth nanoclusters were investigated with transmission high-energy electron diffraction from room temperature up to 525 ± 6 K. The Bi nanoclusters were fabricated by thermal evaporation at room temperature on transmission electron microscope grids coated with an ultrathin carbon film, followed by thermal and femtosecond laser annealing. The annealed sample had an average cluster size of ∼14 nm along the minor axis and ∼16 nm along the major axis. The Debye temperature of the annealed nanoclusters was found to be 53 ± 6 K along the [012] direction and 86 ± 9 K along the [110] …

Go to article

Fabrication And Characterization Of Electrospun Cactus Mucilage Nanofibers, Yanay Pais Jan 2011

Fabrication And Characterization Of Electrospun Cactus Mucilage Nanofibers, Yanay Pais

USF Tampa Graduate Theses and Dissertations

This work seeks to fabricate, optimize, and characterize nanofibers of cactus Opuntia ficus-indica mucilage and Poly (vinyl alcohol) (PVA) by electrospinning. Mucilage is a neutral mixture of sugars produced by cactus and PVA is a non-toxic, water-soluble, synthetic polymer, which is widely used as a co-spinning agent for polymers. Mucilage was extracted from the cactus pad and prepared for electrospinning by mixing with acetic acid. Two types of PVA were used differentiating in high and low molecular weights. Concentrations of PVA were varied to find an adequate threshold for fiber formation. Changing the ratio of PVA to cactus mucilage produced …

Go to article

Photoelectrochemical Properties Of N, S, And Cl Modified Nano Tio2 Thin Films, Hong Yun, Chang-Jian Lin, Jing Li, Rong-Gui Du Nov 2010

Photoelectrochemical Properties Of N, S, And Cl Modified Nano Tio2 Thin Films, Hong Yun, Chang-Jian Lin, Jing Li, Rong-Gui Du

Journal of Electrochemistry

The nitrogen(N),sulfur(S) and chlorine(Cl) modified nano TiO2 thin films were prepared by adding Ti(O-n-Bu)4 as the precursor into concentrated HNO3,H2SO4 and HCl Solutions,respectively,on different substrates in a sol-gel process.The photoelectrochemical performances of N,S and Cl modified nano TiO2 thin films have been studied by UV-vis(DRS),photocurrent curves,EIS and OCP-time curves.N-modified TiO2 nano films show better surface structure,which helps to improve the quantum efficiency of nano TiO2 thin films.

Go to article

Synthesis Of Mild–Hard Aao Templates For Studying Magnetic Interactions Between Metal Nanowires, Jin-Hee Lim, Aurelian Rotaru, Seong-Gi Min, Leszek Malkinski, John B. Wiley Nov 2010

Synthesis Of Mild–Hard Aao Templates For Studying Magnetic Interactions Between Metal Nanowires, Jin-Hee Lim, Aurelian Rotaru, Seong-Gi Min, Leszek Malkinski, John B. Wiley

Physics Faculty Publications

The sequential application of mild and hard anodization techniques in the fabrication of porous aluminamembranes allows one to decrease the number of continuous pores in anodized aluminium oxide (AAO) templates. Initially, standard mild anodization techniques were used to create porous templates with 100 nm interpore distances and 70 nm pore diameters. Hard anodization treatment on the same membrane then produced interpore distances of about 265 nm with diameters of 110 nm. At the interface between the two anodization steps, many of the mild-side pores were terminated to create a mild–hard membrane (Mi–Ha AAO) where the functional interpore distances were 200–300 …

Go to article

The Mechanism Of 13CoAd/12Co Isotope Exchange At Pt Electrode,A Combined Study By Electrochemical In-Situ Infrared Spectroscopy And Dipole-Dipole Coupling Analysis, Sang-Zi Liang, Shao-Xiong Liu, Ling-Wen Liao, Qian Tao, Jing Kang, Yan-Xia Chen Aug 2010

The Mechanism Of 13CoAd/12Co Isotope Exchange At Pt Electrode,A Combined Study By Electrochemical In-Situ Infrared Spectroscopy And Dipole-Dipole Coupling Analysis, Sang-Zi Liang, Shao-Xiong Liu, Ling-Wen Liao, Qian Tao, Jing Kang, Yan-Xia Chen

Journal of Electrochemistry

In this contribution,we have analyzed the IR spectra of saturated CO adlayer at rough Pt film electrode as a function of fractional surface coverage of 13COad /12CO recorded during 13COad /12CO isotope exchange process according to dipole-dipole coupling theory and coherent potential approximation. By properly choosing the parameters of adlayer structure and dipole-dipole coupling interaction under coherent potential approximation, we demonstrated that we can successfully simulate the IR spectra as a function of the surface coverage of CO adlayer at rough Pt film electrodes by assuming that COad molecules with low …

Go to article

Comparative Study Of Nanoporous Pt, Ptru And Ptruir Catalysts Using Electrochemical Ftir Spectroscopy, M. Amussen Robert, Holt-Hindle Peter, Nigro Samantha, Aicheng Chen Aug 2010

Comparative Study Of Nanoporous Pt, Ptru And Ptruir Catalysts Using Electrochemical Ftir Spectroscopy, M. Amussen Robert, Holt-Hindle Peter, Nigro Samantha, Aicheng Chen

Journal of Electrochemistry

In recent years much effort has been put towards developing efficient Pt-based electrocatalysts for applications in fuel cells. With the rising cost of precious metals such as Pt,the need to enhance the activity and to decrease the load of catalysts is prominent. Herein we report on the synthesis and comparative study of nanoporous Pt,PtRu and PtRuIr electrocatalysts. The nanoporous electrodes were fabricated using a hydrothermal method and characterized by scanning electron microscopy (SEM) ,energy dispersive spectroscopy (EDS) ,X-ray diffraction (XRD) and X-ray photoelectron spectroscopy (XPS) . The electrocatalytic activity of the fabricated nanopo- rous materials was evaluated using both CO …

Go to article

In Situ Surface-Enhanced Raman Scattering Spectroscopic Study Of Sulfur Adsorption On Polycrystalline Platinum Electrode Surface, Bolian Xu, In-Su Park, Ying Li, De-Jun Chen, Yuye J. Tong Aug 2010

In Situ Surface-Enhanced Raman Scattering Spectroscopic Study Of Sulfur Adsorption On Polycrystalline Platinum Electrode Surface, Bolian Xu, In-Su Park, Ying Li, De-Jun Chen, Yuye J. Tong

Journal of Electrochemistry

The paper reports the first in situ surface enhanced Raman scattering (SERS) spectroelectrochemistry study of sulfur adsorption and electro-oxidation on highly roughened polycrystalline Pt surface in both acidic and basic supporting electrolytes. The SERS spectra were taken at a constant electrode potential after accumulative electro-oxidation CVs of the Pt electrode with pre-adsorbed sulfur species and at different electrode potentials that were varied stepwise of the Pt electrode immersed in sulfur-containing electrolytes without pre-adsorbed sulfur species. In both cases,a dominant vibrational band at 299 cm-1 in acidic electrolyte but at 310 cm-1 in basic electrolyte was observed,which was assigned …

Go to article

Preliminary Investigation Of Iron Protoporphyrin Sams On Platinum Electrodes By Surface Enhanced Vibrational Spectroscopies, Min Ma, Yao-Yue Yang, Han-Xuan Zhang, Wen-Bin Cai Aug 2010

Preliminary Investigation Of Iron Protoporphyrin Sams On Platinum Electrodes By Surface Enhanced Vibrational Spectroscopies, Min Ma, Yao-Yue Yang, Han-Xuan Zhang, Wen-Bin Cai

Journal of Electrochemistry

In situ SERS and ATR-SEIRAS were applied to investigate the electrochemical and structural properties of iron protoporphyrin IX (FePP) self-assembled monolayers (SAMs) on Pt electrodes in 0. 1 mol· L -1 HClO4. The potential dependent SERS spectra of the FePP SAM on a roughened Pt electrode with the enhancement factor of ca. 40 were acquired with the excitation line of 514 nm. Analyses of SERS data over the potential region from 0. 5 to -0. 3 V enabled to obtain potential dependent adsorption isotherms,from which the formal redox potential could be estimated to be ca. -0. 2 V. …

Go to article

Studies Of Oxidation Processes Of Adsorbed And Solution Co On Pt(110) Electrode By Cyclic Voltammetry And In Situ Ftirs, Li Tian, Jun-Tao Li, Jin-Yu Ye, Chun-Hua Zhen, Shi-Gang Sun Aug 2010

Studies Of Oxidation Processes Of Adsorbed And Solution Co On Pt(110) Electrode By Cyclic Voltammetry And In Situ Ftirs, Li Tian, Jun-Tao Li, Jin-Yu Ye, Chun-Hua Zhen, Shi-Gang Sun

Journal of Electrochemistry

The oxidation processes of adsorbed CO (COad) and solution phase CO (COsol) on Pt(110) electrode were investigated by cyclic voltammetry and in-situ FTIR spectroscopy. It has revealed that in comparison with COad on Pt(110) in a CO-free solution,the oxidation current peak of COsol in a CO-saturated solution is positively shifted ca. 168 mV,and the peak current density has been increased by 6. 70 times. Linear adsorbed CO (COL) is determined by in-situ FTIR spectroscopy as the main species,which is uniformly distributed on Pt (110) surface. In a CO-free solution,the onset potential of COL is measured by in-situ FTIRS ca. 0. …

Go to article

First Prev Next Last