Materials Science and Engineering Commons^™

Epri Ccp Beneficiation Research Update, Benjamin Gallagher, Patrick Webb

World of Coal Ash Proceedings

Coal combustion products (CCPs) are frequently utilized as supplementary materials in cement and concrete manufacturing. With an estimated 2 billion metric tons stored in repositories across the United States, interest in beneficial use has expanded beyond class F fly ash to include ponded and high-LOI ash. Beneficiation provides a critical pathway for managing CCP repositories, particularly under closure-by-removal strategies, and where ash sources have historically been difficult to process. Research conducted at EPRI’s Ash Beneficial Use Center (ABUC) examines the feasibility of processing these ash types into usable products and offers insights into repository variability and classification. Furthermore, the study …

Risk Evaluation Of Small Coal Combustion Residual Management Unit (Ccrmu) Fills, Andrew Bittner, John Kondziolka, Qian Zhang, Masoud Arshadi

World of Coal Ash Proceedings

US EPA expanded the scope of CCR regulations in 2024 to areas of historical CCR placement not regulated under the 2015 CCR rule, including CCR used as fill. US EPA presented new risk analyses specific to CCRMU fills and defined different regulations for CCRMU fills from 1 to 1,000 tons, noting uncertainty as to whether there was a size of CCRMU fill below which acceptable risks could be expected. This research fills US EPA's stated data gap by modeling and analyzing impacts from small CCRMU fills. Modeling was conducted using the same methods, models, and most of the same inputs …

Consolidation Modeling To Support Closure Planning Of An Upstream Raise Ccr Surface Impoundment Containing Fgd Material, Tanya Walkenbach, Craig Schuettpelz, Todd Stong, Shane Stockdill

World of Coal Ash Proceedings

Rainbow Energy Center’s (REC’s) Coal Creek Station has managed calcium sulfite flue gas desulfurization (FGD) material in composite-lined upstream raise surface impoundments since 2001. The upstream raise surface impoundment utilizes bottom ash (drainage zone) and fly ash (structural zone) produced at Coal Creek Station to contain the FGD placement. FGD material was hydraulically sluiced to the center of the 110-acre Upstream Raise 92 (UR92) coal combustion residual (CCR) unit between 2001 and 2021. The FGD was deposited to a maximum thickness of approximately 100 feet in the center of the unit. Significant consolidation of FGD material occurred with subsequent FGD …

Investigating The Performance Of Processed Stockpile Fly Ash For Low Carbon Concrete, Michael Mccarthy, Arfas Habeeb, Laszlo Csetenyi, Roderick Jones

World of Coal Ash Proceedings

Reducing embodied carbon in concrete has increasingly focused on clinker substitution through the use of supplementary cementitious materials (SCMs). However, the local availability of fly ash, a widely used SCM in the UK, offering benefits in this role, has reduced over the past decade, as coal-fired electricity generating plants have gradually been taken out of service. Attention has, therefore, increasingly focused on fly ash from stockpile and landfill sites to maintain supply, i.e., material not used following production and put into storage. Most UK fly ash originated from the burning of bituminous coal, producing low-lime siliceous material, which although undergoing …

Solar Solution For Closed Ccr Units And Adjacent Land, Chris Fairey

World of Coal Ash Proceedings

Solar Solution for Closed CCR Units and Adjacent Land Chris Fairey1, Kenny Hughes1 1Watershed Geo, 1125 Sanctuary Pkwy, Suite 180, Alpharetta, GA 30009 KEYWORDS: Solar, Racking, Brownfield, Greenfield, Slopes, PowerCap® ABSTRACT With the reduction in coal fired power generation, there is a consistent trend in the industry to supplement generation with solar power. The property located within and surrounding these decommissioned power plants offers a significant opportunity to create a renewable solar power asset. The PowerCap® Nail to Rail System, developed by Watershed Geo, is an advanced solar racking solution designed for sites that do not require environmental closure such …

Investigation Of A Historical Coal Combustion Residuals Management Unit (Ccrmu), Todd Stong, Shane Stockdill, Erin Hunter

World of Coal Ash Proceedings

Rainbow Energy Center’s (REC’s) Coal Creek Station has managed coal combustion residuals (CCR) in various engineered impoundments and landfills since plant operation began in 1978. Since then, waste containment methods have evolved resulting in significant changes to their CCR management practice. In the late 1980s and early 1990s REC closed several existing CCR units with natural soil liners and constructed several new CCR units with composite liner systems. One of the closed units was an area now referred to as North Section 16, an impoundment that received CCR including bottom ash, fly ash, and flue gas desulfurization material. North Section …

Transportation Logistics Panel, John Ward, Andrew Vollmer, Tracy Zea, Marci Jenks

World of Coal Ash Proceedings

As the industry shifts from freshly generated ash to harvested materials and advanced utilization, logistics is becoming one of the primary drivers of project success or failure. This moderated panel will explore how sourcing, transportation, and storage realities are changing — and what project teams most often underestimate when working with harvested coal ash. Panelists will discuss what breaks, what becomes more complex, and how logistics considerations are reshaping planning and development.

Abundances Of Elements In Global Coals, Shifeng Dai

World of Coal Ash Proceedings

The abundance of elements in coal is important not only because it provides a solid scientific and practical foundation for various geochemical comparisons, but also because it helps address broader questions in Earth Sciences. In this study, data on major and trace elements in global coals comprising hundreds of thousands of coal samples were compiled from peer-reviewed journal articles, books, various databases, dissertations, and technical reports. These data formed the basis for estimating element abundances in global coals presented in this study. All collected data were rigorously screened for reliability, and any records with questionable quality were excluded from the …

Optimization Of Remedial Strategies For Ccr Site Corrective Action Through Advanced Geochemical Modeling, Cole Mayer, Pj Nolan

World of Coal Ash Proceedings

The power industry is actively designing and implementing corrective measures for Coal Combustion Residuals (CCR). In many cases, these measures include active remedies such as pump and treat, in-situ injection, or reactive barriers, all of which demand a thorough understanding of the underlying geochemical system. Depending on the geochemical characteristics of an aquifer, different chemical reagents can achieve varying degrees of success or even be detrimental to the remediation of the site. Advanced geochemical modeling is an invaluable tool for developing a remedy that is optimized to the site-specific geological, hydrological, and geochemical environment. In the case study presented here, …

Application Of Stable Isotopes In An Alternative Source Demonstration, Alison O'Connor

World of Coal Ash Proceedings

Stable isotope analysis is commonly used in age dating, provenance studies and to differentiate between sources of groundwater. Multiple studies have shown that strontium and boron isotopic ratios can be successfully used in identifying CCR impacts to groundwater. This talk presents an applied case study using boron and strontium isotopes in conjunction with additional geochemical approaches in an alternative source demonstration. Boron and strontium isotopes were measured in both groundwater and CCR leachate over sampling events from 2019 to 2025. The data revealed that strontium and boron isotopic signatures in groundwater near the CCR unit differed significantly from both site-specific …

Alternative Cover Permitting And The Ccr Rule, Evan Andrews, Victor Damasceno

World of Coal Ash Proceedings

Federal rules (40 CFR Parts 9, 257 and 261) that regulate coal combustion residuals (CCR) created a significant demand associated with closure of coal ash management and storage facilities using liner systems. Timelines associated with these facility closures combined with substantial project scale and potential for future mining /reuse has driven the need for closure systems that perform beyond the prescriptive soil / geomembrane caps outlined in the federal regulations. As outlined in section 257.102 (d)(3)(i) of the CCR Rule, the standard cover system must include an infiltration layer of at least 18 inches of earthen material and an erosion …

Ccr Landfill Closure Challenges, Solutions And Innovation, Jay Mokotoff, Drew Browning, Steve Applegate

World of Coal Ash Proceedings

CCR landfills can present unique design and construction challenges for the industry when closing these units at the end of their life. In comparison to CCR surface impoundments, CCR landfills typically have greater flexibility under the CCR Rule for operations and beneficial use purposes and may not have defined closure dates which results in some of these closures extending further into the future. However, as coal burning plants continue to shudder, the closure of these landfills is rapidly approaching. This presentation will focus on the challenging site conditions, site specific considerations and potential solutions when designing and constructing the landfill …

Distinguishing Ccp From Nuclear Impacts In Groundwater, Lea Millet

World of Coal Ash Proceedings

As the energy transition from fossil fuels to other generation technologies continues, many companies worldwide are evaluating the feasibility of constructing nuclear power plants at sites previously used for coal-powered generation. Thermal power plant sites offer advantages for siting nuclear generation such as proximity to cooling water and grid connections; however existing impacts to groundwater from coal combustion product (CCP) management units may confound monitoring programs designed to detect impacts from nuclear operations. For example, boron and lithium may be present in waters associated with CCP management and nuclear power plant operations, and potassium that often has concentrations above background …

Engineering Granulometry To Optimize Performance Of Reclaimed Ash, Russell Hill

World of Coal Ash Proceedings

As utility production of fresh fly ash declines, the concrete industry is turning to reclaimed and beneficiated materials to maintain reliable SCM supply. This transition creates an opportunity not only to secure volumes but to engineer improved performance. The ReCinis™ beneficiation process enables this by providing controls that tune particle-size distribution (PSD), sphericity, packing behavior, surface area, and surface activation. Processing trials show that blends combining fine ground fractions with spherical, broad-graded hydrocyclone overflow (OF) materials can balance high reactivity with favorable rheology. Mechanochemical activation during grinding appears to increase reactivity beyond what surface-area metrics alone predict, likely through removal …

Sustainability And Waste Diversion At Tva Shawnee "Project Phoenix", Bryan Jacob, Shane Harris

World of Coal Ash Proceedings

An engineered turf closure system can serve as an ideal foundation for a solar energy system to be installed atop coal combustion residual (CCR) impoundments. This approach not only enables productive power generation during the post-closure period, it also preserves opportunities for recovery and beneficial use of CCR material in the future. “Project Phoenix” at TVA’s Shawnee Fossil Plant offers an illustrative example. This paper will cover the sustainability benefits of the companion ClosureTurf® and PowerCap® systems installed at that site as well as waste diversion activities undertaken during construction to recycle as much as practical and minimize waste destined …

Expert Perspectives On The U.S. Coal Combustion Products Market – Now, Then, And The Future, Mark Rokoff, David Cox, Walter Lemaire, John Ward

World of Coal Ash Proceedings

This panel discussion will explore the continued evolution of the U.S. coal combustion products market, with a focus on the impacts of dynamic regulatory and market forces. Invited expert panelists will share perspectives on developments over the past several years (building on discussions from WOCA 2022 and WOCA 2024), current conditions, and expected future trends—particularly those likely to shape the market between 2026 and 2030. The discussion will address the interrelated markets for engineering, construction, and beneficiation of ash from both operating and inactive plants. Panelists will offer perspectives relevant to the full coal ash industry, from owner/operator organizations to …

Demystifying Large Language Models: How Ai Is Transforming Data, Compliance, And Decision-Making In Coal Ash And Environmental Management, Scott Pfeiffer

World of Coal Ash Proceedings

The environmental and coal combustion residuals (CCR) industries generate vast amounts of information—from groundwater monitoring reports and RCRA documentation to closure plans and analytical data. Managing, interpreting, and communicating this information is a growing challenge for utilities, regulators, and consultants alike. Large Language Models (LLMs), such as OpenAI’s GPT architecture, represent a breakthrough in how organizations can interact with their technical data. These models use deep neural networks trained on billions of words to understand, summarize, and generate language with human-like accuracy. When securely adapted for enterprise use, LLMs can automate routine reporting, extract data from technical documents, generate regulatory …

Subsurface Delineation Of Coal Combustion Residuals Using Multiple Geophysical Methods, Eric Hageman, Adam Rak, Thomas Jordan, Kate Mckinley

World of Coal Ash Proceedings

Geophysical techniques provide alternative methods of Coal Combustion Residual (CCR) delineation and characterization to supplement more invasive boring programs used for beneficial reuse planning. A demonstration project was designed to characterize the electromagnetic and seismic stratigraphy of CCR material and test the effectiveness of three geophysical techniques: Electrical Resistivity Imaging (ERI), Transient Electromagnetic (TEM) induction, and Multi-channel Analysis of Surface Wave (MASW). The demonstration project was completed at a dry-stack CCR unit containing a variety of CCR ash, gypsum, and thin layers of drainage aggregate (limestone). During a single-day deployment, several geophysical survey tests were conducted in specific areas of …

Areosense, Josephine Turney

Williams Honors College, Honors Research Projects

The AeroSense growing system is designed to make indoor aeroponic gardening easy and accessible for everyone. By combining sensors, automation, and AI, the system can monitor and adjust humidity, lighting, and nutrient levels to help plants thrive without requiring expert knowledge. The goal is to create a self-regulating garden that takes the guesswork out of growing fresh herbs and vegetables at home. The project involves building a working aeroponic prototype equipped with misters, pumps, and environmental sensors, all managed by a Raspberry Pi. Using computer vision and machine learning, AeroSense will be able to assess plant health and respond automatically …

Ferric Metal-Organic Frameworks (Mofs)-Based Electrospinning Fibers For Supercapacitors, Samar A. Salim, Hani Nasser Abdelhamid

Nanotechnology Research Centre

Ferric-based metal-organic frameworks (Fe-MOFs) were synthesized and incorporated into poly(methyl methacrylate) (PMMA) using electrospinning to produce PMMA_Fe-MOF nanofibers. The materials were analyzed using X-ray diffraction (XRD), attenuated total reflectance Fourier-transform infrared spectroscopy (ATR-FTIR), and scanning electron microscopy (SEM). The electrospun materials were directly integrated into nickel foam (NF) electrodes for energy storage applications, e.g., supercapacitors. The electrochemical performance was assessed using cyclic voltammetry (CV), galvanostatic charge-discharge curves (GCDC), linear sweep voltammetry (LSV), and electrochemical potentiokinetic reactivation (EPR). The PMMA_Fe-MOF electrodes exhibited outstanding capacitive performance, achieving specific capacitances of up to 1017.5 F/g at 1 A/g for the 2.5 % Fe-MOF …

Design Of A 10-Ton Capacity Solar-Powered Cold Storage At The Cituis Fish Auction Site, Tangerang, Banten, Indonesia, Wardi Wardi, Muhammad Arif Budiyanto

Journal of Materials Exploration and Findings

This study presents the design of a 10-ton capacity solar-powered cold storage system for the Cituis Fish Auction Site (TPI) in Tangerang, Indonesia, as a sustainable solution to support the coastal fisheries sector. The system comprises two temperature zones: an anteroom at 5°C and a freezer room at -30°C, both integrated with a hybrid system utilizing solar panels and batteries. The total power consumption of the cooling system reaches 27.51 kW. The simulation results, obtained using HOMER Pro software, indicate that the hybrid PV system can reduce CO₂ emissions by up to 16,754 kg per year. From an economic …

3d Printing Of A Solid-State Battery, Maurizio A. Brozzi

Honors Undergraduate Theses

Solid-state battery research has gained significant attention in recent years, as it provides a unique solution for several common issues in conventional Li-ion batteries. Additionally, as additive manufacturing technologies continue to advance, they have the potential to fabricate solid-state batteries with new materials. The objective of this study is to explore the feasibility of 3D printing of a solid-state battery. By creating an initial PEO-PSF hybrid polymer matrix dissolved in DMSO and adding a lithium salt, the base electrolyte ink was formed. With the addition of conductive additives and active material, electrode inks were also produced. Super P was used …

Microwave-Assisted Reduction Of Critical Metal Oxides From E-Waste Mixture, Kurundu Shavinka Jayasekera

Graduate Theses, Dissertations, and Problem Reports (ETD)

The efficient recovery of critical metals such as tantalum (Ta), manganese (Mn), gallium (Ga), and indium (In) from electronic waste (e-waste) is essential for resource sustainability and environmental protection. This research uses microwave-assisted treatment to investigate the carbothermal reduction of these four specific metals from their oxides in a simulated e-waste mixture, with carbon black serving as both a microwave coupling and reduction agent. Microwave processing is used specifically because it offers a rapid and energy-efficient alternative to conventional thermal methods, with the benefits of intrinsic heating and selective heating of materials. The first experiments centered on understanding the effects …

Advanced Air Preheater Sealing Systems For Enhanced Efficiency And Reliability In Thermal Power Plants, Pavan Kumar Ravulaparthy

Theses and Dissertations

Global electricity generation still relies heavily on thermal power plants, which consume vast amounts of fuel and emit significant amounts of carbon dioxide. A major but often overlooked source of inefficiency in these plants lies within the rotary regenerative air preheater (RAPH), a critical heat-exchange component where air leakage can exceed 20% in aging units. This leakage increases fuel consumption, parasitic fan power, and CO₂ emissions, while degrading boiler reliability.

This research introduces advanced adaptive sealing systems designed to mitigate these losses by dynamically compensating for rotor eccentricity, thermal distortion, and wear under harsh operating conditions. Brush seals, composed of …

La2nio4+Δ-Based Solid Oxide Electrolysis Cell (Soecs) Electrodes Enhanced With Complex Perovskite Nanocatalyst Processed By Surfactant-Enabled Infiltration, Cole Samuel Klemstine

Graduate Theses, Dissertations, and Problem Reports (ETD)

As the world seeks to reduce its reliance on hydrocarbons, the demand for sustainable hydrogen production methods has become increasingly critical. Hydrogen is a versatile energy carrier that can be produced from various sources, including water, natural gas, and biomass. Replacing the burning of hydrocarbons with hydrogen could significantly reduce greenhouse gas emissions, contributing to global climate goals like those set by the US H2NEW program. The joint technologies of solid oxide fuel and electrolysis cells present the ability to both produce and process clean hydrogen to meet these goals. Development into solid oxide fuel cells has been met with …

Wood-Plastic Composites Integration For Triboelectric Nanogenerator Electricity Generation, Hanbyeol Park, Razamala Yashna F. Dimaporo, Sophia Maureen A. Emperado, Anton Jefferson L. Pangilinan, Juan Carlo T. Gumangan

Sinaya: A Philippine Journal for Senior High School Teachers and Students

Access to electricity in underdeveloped communities is particularly crucial in improving the living standards of people and alleviating poverty by promoting sustainable development. This study deals with the exploration of incorporating wood-plastic composite (WPC) – specifically wood pulp (W) and high-density polyethylene (H) – into triboelectric nanogenerator (TENG) flooring system to convert mechanical energy to electrical energy, promoting sustainable energy, reducing greenhouse gas emissions, improving the quality of life, and serving as feasible flooring tiles. Two types of TENG tiles were prepared by using different WPC ratios: 30W:70H and 70W:30H. A static bending test was conducted to assess the flexural …

Fabrication And Performance Of Scalable Bio-Engineered Porous Layers For Efficient Co2 Capture, Mary Sharon Rose Bondugula

Theses and Dissertations

This dissertation addresses the critical challenge of mitigating climate change by advancing CO2 capture technologies. As global CO2 emissions continue to rise, effective methods for capturing and separating CO2 from industrial processes are essential to combat climate change. Existing CO2 capture systems, such as Pressure Swing Adsorption (PSA) and Temperature Swing Adsorption (TSA), often rely on packed bed designs that face limitations, including poor heat and mass transfer, slow gas diffusion, and low thermal conductivity, reducing their efficiency. To overcome these challenges, this dissertation explores innovative solutions by developing advanced adsorbent coatings and scalable bed configurations.

This research begins by …

Synthesis And Doping Effects In Highly Conductive Chalcogenide Solid Electrolytes., Selim Halacoglu

Electronic Theses and Dissertations

Lithium and sodium ion batteries have been a vital component in the growth of small, portable electronic devices and EVs over the past 30 years. For future energy needs, changes to battery chemistry and composition will be necessary for two primary reasons: safer and higher energy batteries. Metal anodes have not seen widespread commercialization because of their propensity to react aggressively with the flammable liquid electrolytes commonly used in modern batteries. Non-flammable solid-state batteries (SSB) with solid electrolytes can safely be used with metal anodes, potentially providing a solution to both problems. The future perspective of safer battery is that …

Development Of Multifunctional Wood Composites With Integrated Phase Change Materials For Enhanced Thermal Management, Self-Healing, And Sustainability., Emmanuel Igbokwe

LSU Master's Theses

Abstract

This study focused on incorporating self-healing, flame retardancy, and energy harvesting capabilities into the wood composite to contribute to more sustainable and energy-efficient building practices. Oriented strand board has been widely used as sheath for roofing or dry walls in residential buildings. Residential buildings account for a large portion of energy consumption. Therefore, an oriented strand board with energy harvesting capability is highly desired. Additionally, flame retardancy and damage self-healing and end-of-life recycling are also critical features for buildings.

In this study, we prepared a novel oriented strand board by constructing sandwich structures. The face sheets of the sandwich …

Electrified Membrane For Water Treatment And Resource Recovery: Advancing Multiscale Strategies In Gas-Involving Reactions, Jianan Gao

Dissertations

Multifunctional, modular, and scalable water treatment technologies that operate without chemical additives are crucial for addressing global water pollution challenges. While traditional membrane-based separation processes are crucial for ensuring clean water supplies, they primarily focus on pollutant removal rather than on the upcycling of pollutants into valuable resources. Electrified membrane filtration presents a robust alternative, utilizing minimal or no chemical additives and harnessing electrical power to directly reduce contaminants or produce reactive oxidants or reductants on-site.

This dissertation is dedicated to the development of innovative electrochemically reactive membranes designed to address three major challenges: (1) the engineering of electrocatalysts with …