Materials Science and Engineering Commons^™

Installation Direction Design And Construction Control Of Sliding Bearing Of Continuous Girder Bridge, Guan Changlu, Sun Xiudong, Dong Hao, Wang Xingzhou

Journal of China & Foreign Highway

Continuous girder bridges can improve the structural stress,increase the structural bearing capacity,and promote ride comfort.However,some continuous girder bridges suffer from issues such as bearing dislocation,upper torsion,and damage to seismic arrestors.To identify deficiencies in current design and construction control,an in-depth analysis of these issues was conducted.The findings reveal the main reason is that the bidirectional sliding bearings (nearly half of the total ) fail to provide horizontal force,and the main sliding direction of the unidirectional sliding bearings is inconsistent with the deformation of the bridge superstructure.In this paper,factors including temperature-induced deformation,material shrinkage,elastic compression,creep,and construction process control of the bridge superstructure were …

Crack Propagation Of Vehicle‑Steel Bridge Deck Slabs Based On Pavement Damage, Tang Sheng, Yin Xinfeng, Zhang Ming, Yan Wanli

Journal of China & Foreign Highway

In order to study the influence of vehicles under different pavement damage conditions on crack propagation of welded toe at the roof of steel bridge deck slabs,finite element models of suspension bridges,fine vehicles,and local steel bridge deck slabs were established,and multiple groups of obstacle heights were set to simulate pavement damage.The explicit dynamic analysis program was used to simulate vehicle-bridge coupling vibration and extract the forces of vehicles on the steel bridge deck slabs at different lanes,speeds,and obstacle heights.The crack propagation life of the welded toe at the roof was obtained by applying them to a local steel bridge deck …

Calculation Of Socket Depth For Circular Pipe Pier-Bearing Platform Socket Connection, Chen Jingli, Xiao Feng, Wang Zhigang, Wang Zhihai, Xu Yan

Journal of China & Foreign Highway

The minimum socket depth for circular pipe pier-bearing platform socket connection can be calculated according to Article C.0.3 in the Specifications for Design of Highway Precast Concrete Bridges (JTG/T 3365 -05—2022 ).In order to enable engineering designers to fully understand and correctly apply the calculation formula in this article,this paper first introduced the main technical features of the typical connection scheme,as well as the structural failure principles and objectives formulated in the specification of the typical connection scheme.Then,it briefly introduced the experimental research content and results of the typical connection scheme and explained the key construction measures and their functions …

Reliability Analysis Of Long‑Span Concrete Box Arch Bridge Under Temperature Effect Combinations, Zheng Junlin, Jiang Youbao, Zheng Xinhao, Lu Naiwei

Journal of China & Foreign Highway

The existing design methods for concrete arch bridge structures do not consider the random characteristics of the eccentricity generated by load effects and overlook the influence of stochastic eccentricity on structural reliability.To address this deficiency,a calculation model for eccentricity under temperature effect combinations was derived.The random characteristics of eccentricity for different sections of the main arch of concrete arch bridges and their sectional bearing capacities were analyzed under different load parameter combinations.By utilizing the Monte Carlo method,reliability indices were computed for different sections of the main arch and different load parameter combinations after considering the random characteristics of eccentricity.The results …

Preparation And Performance Of Emulsified Asphalt With High-Temperature Resistant And Wheel Sticking-Free Effects, Yan Han, Zha Xudong, Kang Xiaogang, Gong Yan, Zhang Zhengji, Zhang Wenshuai

Journal of China & Foreign Highway

To address the problem of wheel sticking at high temperatures in the construction process of existing wheel sticking-free emulsified asphalt of tack coat,this paper adopted the composite modification method of 70# and 15# matrix asphalt and waterborne polyurethane resin (WPR ) to prepare hard asphalt-WPR (HA-WPR )-modified emulsified asphalt in accordance with the high-temperature resistant and wheel sticking-free requirements.Through a series of laboratory tests,the technical performance,wheel sticking-free performance,and interlayer bonding performance of the emulsified asphalt were researched and compared with ordinary wheel sticking-free emulsified asphalt and ordinary emulsified asphalt tack coat oil.The results show that the technical performance of the …

Model Analysis Of Axial Compressive Mechanical Properties Of Concrete Column Constrained By Textile-Reinforced Engineered Cementitious Composites, Ma Gao, Wang Zhaoyang

Journal of China & Foreign Highway

In order to avoid the problem of matrix cracking in textile-reinforced concrete (TRC ),a reinforcement method of textile-reinforced engineered cementitious composites (ECC ),namely TRECC composed of textile and high-performance ECC was proposed.However,the research on the axial compressive mechanical properties of TRECC-constrained concrete in China and abroad is still insufficient,and there is a lack of reliable strength and ultimate strain analysis models.A total of 116 axial compression test results of TRC-constrained concrete columns and 125 axial compression test results of TRECC-constrained concrete columns were collected.The confinement mechanisms and failure modes of TRECC and TRC-constrained concrete were compared.Then,the strength models and ultimate …

Key Techniques For Constructing Flexible Geosynthetic Reinforced Soil Abutments, Yu Xiaoxiao, Xu Chao, Li Haoyu, Zuo Binli

Journal of China & Foreign Highway

The flexible geosynthetic reinforced soil (GRS ) abutments offer several advantages,including cost saving,reduced bridgehead misalignment,and good seismic performance,showing great potential for application in transportation engineering both in China and abroad.The flexible GRS abutment is essentially composed of a composite structure formed by closely spaced layers of geosynthetic reinforcement material,and the construction quality and load-bearing capacity are crucial to the success of the project.To ensure construction quality and study the construction process of flexible GRS abutments,a construction site monitoring method was adopted.Based on the experience from the construction of a vehicular overpass on the Wuwei ‒ Yuexi Expressway,the quality control measures …

Research On Mechanical Entry Excavation And Reinforcement Measures For Large Cross-Section Tunnel, Liang Xiao, Li Ke, Guo Hongyan, Hu Xuebing, Yao Chengrui

Journal of China & Foreign Highway

With the innovation of tunnel construction techniques and mechanical equipment,mechanical drilling and blasting for mountain tunnels have gradually developed.However,several challenges exist during the mechanical entry excavation for mountain tunnels,including the significant influence of geological factors,limited equipment adaptability,and constrained working space.This research,based on a specific tunnel project,utilized FLAC3D finite difference software to study the mechanical excavation method and auxiliary reinforcement measures for shallow-buried segments at the large cross-section tunnel portal.A comparative analysis was conducted on the displacement of surrounding rock,the stress of supporting structures,and the variation of plastic zones before and after tunnel face reinforcement for different advances per cycle and …

Application Research Of Bim Technology In Highway Prefabricated Bridge Scheme Design, Li Jinlong, Wang Xinnan, Liu Dongsheng, Chen Zhongzhi

Journal of China & Foreign Highway

At present,the highway bridge scheme requires continuous adjustments and upgrading due to iterative updates of design data and refined investigation of the surrounding environment of the bridge site.This paper upgraded the traditional route design software,developed a GIS-integrated platform,built a three-dimensional environment with design data as the core,and created a bridge scheme model through parametric intelligent design.It also evaluated and optimized the bridge scheme based on the integration of the bridge model and the surrounding environment.The results show that by using BIM technology,the forward design of a bridge scheme based on a three-dimensional environment is realized.This approach automates the scale statistics …

Optimizing And Validation Of Sustainable Uhpc With Waste Glass Powder Utilizing Modified Particle Packing Approach And Response Surface Methodology, Mohamed Taman, Elsaid Maaty, Alaa Mehrez, Ahmed Kamal Isaac

Journal of Engineering Research

The current study explores the potential of utilizing Waste glass powder (WGP) as an alternative to cement in the development of sustainable eco-friendly Ultra-high-performance concrete (UHPC). UHPC mixtures underwent optimization through the application of a Modified Andreasen and Andersen (MAA) particle packing model, resulting in a reduction of cement content from 900 to 800 kg/m³. Six mixes were cast, with varying levels of cement replacement ratios with WGP up to 50%. The evaluation focuses on the flowability, dry density, and mechanical properties of UHPC at different ages using normal curing. A statistical model utilizing response surface methodology (RSM) …

Evaluating The Effectiveness Of Stay-In-Place Forms To Improve The Tosional Stability Of Box Beam Bridges During Erection, Karl E. Barth, Michael W. Seek, Gregory K. Michaelson, Dimitra Pyrialakou, Brook T. Woldegabriel

Engineering Technology Faculty Publications

Cold-formed tub girders provide an effective steel solution for short-span bridges. The girders are often delivered with an open top with stay-in-place forms installed on site. Walkways may be installed to the side of the girder that can induce significant torsion rotations in the open cross section. Full scale tests on girder specimens have shown that installing one or two panels of stay in place forms at the ends of the girder can significantly reduce the torsion rotation of the girder by providing warping resistance. Cantilever tests on the stay in place forms are performed to investigate the influence of …

Reuse Of Calcium Carbonate (Caco3) Recovered From Discarded Carpets As Filler In Fiber-Reinforced Polymer (Frp) Composites, Roshan Devkota

Graduate Theses, Dissertations, and Problem Reports (ETD)

Over four billion pounds of carpet are discarded annually in the United States, making carpet waste a significant environmental concern. Calcium carbonate (CaCo₃) constitutes up to 45% of the mass of most synthetic carpets. Reusing this CaCo₃ as a filler in the rapidly growing fiber-reinforced polymer (FRP) industry, which is projected to reach USD 10.38 billion, presents a low-cost, practical approach to developing a market-based solution to post-consumer carpet waste.

This study investigates the reuse of CaCo₃ recovered from discarded carpet backing as a filler in FRP composites, focusing on its mechanical viability in comparison to virgin CaCo₃. The methodology …

A Comparative Study Between Soft Structures And Hard Structures For The Protection Of Egypt’S Coastlines Against Climate Change, Donia Eldwib

Theses and Dissertations

Coastal communities worldwide face unprecedented threats from climate change, with rising sea levels, increased storm intensities, and accelerated coastal erosion posing significant risks. Egypt, with over 3,000 kilometers of coastlines along the Mediterranean and Red Seas, it is particularly vulnerable due to its densely populated and economically critical low-elevated coastal zones. With the Mediterranean Sea, and the Nile Delta specifically under huge threats, this study examines the different coastal protection strategies used to address these climate change impacts. Different coastal protection structures have been used throughout the years starting with the well-known hard structures moving on to greener alternatives such …

Optimization Of Construction Scheme Of Ultra‑Large Special‑Shaped Foundation Pit Adjacent To Existing Station And Temporary Steel Bridge, Chen Dengwei

Journal of China & Foreign Highway

With the intensifying development density of urban underground space in China，the impact of ultra-large foundation pit construction on the normal operation of adjacent structures cannot be ignored.Relying on the Huangmugang Comprehensive Transportation Hub Project in Shenzhen，this paper studied the deformation of the envelope structure and soil caused by the excavation of the ultra-large special-shaped foundation pit，as well as the structural response of the deformation of the adjacent existing station and the temporary steel bridge.The paper optimized the construction scheme of the special-shaped foundation pit excavation.The results show that the deformation trend of the envelope structure on the north and south …

Friction‑ 1d Transformer ： A 1d Vision Transformer Hybrid Model For Skid Resistance Prediction On Asphalt Pavements, Pei Feifei, Nie Zilong, Xu G Uomin, Zhan You, Gong Xianqi, Ai Changfa, Deng Yuan, Ji Zhengyun, Wang Shifa

Journal of China & Foreign Highway

The friction performance of road surfaces is an important indicator of highway safety，which is closely related to road texture.In this paper，a set of three-dimensional denoising methods for road texture data with different noise levels was proposed，which could effectively remove noise while preserving local texture features.In addition，a skid resistance prediction model named Friction- 1D Transformer was developed based on the design concept of Vision Transformer （VIT） for skid resistance evaluation of asphalt pavements.Unlike traditional convolutional neural networks，the Friction- 1D Transformer utilized positional encoding structures and multi-head attention mechanisms to extract global features from one-dimensional （1D） texture signals along the direction of …

Experimental Investigation On Shrinkage Effect Of Ultra‑High Performance Concrete Under Steam Curing, Li Bing, Yang Tengyu, Fang Changle, Luo Zirun, Li Chuanxi, Tan Ke

Journal of China & Foreign Highway

Determining the free shrinkage of U HPC is an important basis for analyzing the shrinkage effect of steel UHPC composite bridge deck.Therefore，based on the UHPC materials to be used in a project，three batches of UHPC free shrinkage specimens were made，and three specimens were made in each batch.By testing the strain and temperature of specimens during curing，the free shrinkage strain-age curve and temperature-age curve of UHPC were obtained.The development and variation law of UHPC shrinkage strain are discussed.Based on the experimental results，the equivalent time is introduced on the basis of Arrhenius empirical formula，and a modified model of free shrinkage is proposed.Finally，based …

Mechanical And Vegetative Performance Of Bamboo Fiber‑Reinforced Eco‑Concrete With Recycled Aggregate, Li Tao, Deng Bofan, He Maolin, Liu Ting, Chen Houde

Journal of China & Foreign Highway

In response to the current common urban construction waste disposal issue，this study utilized processed recycled construction waste aggregate and bamboo waste materials to produce bamboo fiber-reinforced eco-concrete with recycled aggregate.By adjusting the dosage of bamboo fiber，the effects of the dosage of bamboo fiber on the mechanical and vegetative performance of the concrete were systematically analyzed by means of orthogonal tests and verification methods.The test results indicate that bamboo fiber enhances the toughness of eco-concrete significantly.Particularly，when the dosage of bamboo fiber exceeds 3.0 kg/m3，there is a significant enhancement in the tensile performance of the eco-concrete with recycled aggregate.Due to the spatial …

Curing Law And Road Performance Of Polyurethane Mixture, Sun Shengkai, Zheng Mao, Tang Xiong, Liu Li, Zhong Shengran, Si Te

Journal of China & Foreign Highway

Polyurethane mixture is composed of polyurethane binder，rubber particles，and stones.Compared with ordinary asphalt mixture，it has the characteristics of a higher content of rubber particles and large void ratios.This article first tested the viscosity-time curve and viscosity-temperature curve of one-component polyurethane and determined the compaction temperature of the polyurethane mixture.Based on the rutting test，three-point bending test，water immersion Marshall test，freeze-thaw splitting test，and pendulum friction test，the road performance of the polyurethane mixture under different replacement amounts of rubber particles was tested.The research results show that the mixing temperature of PU- 1 polyurethane mixture can be basically controlled between 73 ℃ and 81 ℃，and it …

Elimination Method Of Temperature Lag Effect In Deformation Monitoring Data Of Cable‑Stayed Bridge Structures, Liu Hongshuang, Zhai Wenqiang, Zeng Guoliang

Journal of China & Foreign Highway

There is a temperature lag effect in the deformation monitoring data of the bridge structure.Eliminating the temperature lag effect is of great significance in the health monitoring of the bridge structure.Based on the linear correlation between the deformation of the bridge structure and the temperature，this paper applied the goodness of fit test and proposed a time-domain translation elimination method.On this basis，by taking the long-term synchronous monitoring of the tower inclination，beam end displacement，main girder deflection，and temperature data of a cable-stayed bridge as an example，this method was used to eliminate the temperature lag effect in the deformation monitoring data and compared with …

Sensitivity Analysis Of Parameters Of Cable‑Stayed Bridges With Full Floating Spatial Frame, Liu Anqing, Yan Tengfei, Zheng Pengju, Gu Yanlin, Li Jie, Wang Qiang

Journal of China & Foreign Highway

In order to clarify the influence of design parameters on the mechanical behavior of a cable-stayed bridge of a floating system，a finite element model of the bridge was established by using the finite element analysis software MIDAS/Civil based on a single-tower double-cable plane steel-concrete composite beam cable-stayed bridge with full floating spatial frame.The sensitivity of parameters such as temperature effect，secondary dead load，and support system in the completed bridge state was analyzed and compared with the semi-floating system of the bridge.The results show that temperature and secondary dead load have a significant impact on the deflection and stress of the main …

Segment Connection Mod E For Stiffening Girder Hoisting Construction Of Long‑Span Steel Truss Girder Suspension Bridge, Shao Guangmiao, Pan Q Uan, Yan Donghuang, Xu Hongsheng

Journal of China & Foreign Highway

In the process of stiffening girder construct ion of a long-span steel truss girder suspension bridge，different connection modes of stiffening girder segments will directly affect the internal force，alignment，and bridge state of the structure during construction.By taking the construction of the stiffening girder of a bridge as the research background，the finite element model of the whole process of the bridge was established.The advantages and disadvantages of the segmented hinge method and the segmented rigid connection method were compared，and the two-two segmented rigid connection scheme was proposed.On this basis，according to the changing law of steel truss section alignment and lower chord opening …

Linkage Control Method For Expressway Toll Stations And Plane Intersections, Lei Qing, Wang Zhaoyong, Wu Yurong, Jiang Weiwei, Luo Zhongbin

Journal of China & Foreign Highway

In order to solve the problem of vehicle queuing overflow caused by the mismatch between the expressway toll stations and the capacity of plane intersections，the formula for calculating the maximum queue length was given by analyzing the traffic operation characteristics between toll stations and plane intersections and considering vehicles ’ lane-changing behavior.Due to the strong coupling of the traffic operation between toll stations and plane intersections caused by a short distance between them，a unified linkage control optimization model was established.The research shows that if the queue length in the connecting direction of the plane intersections exceeds the allowable maximum queue …

Research On T‑Beam System With Diaphragm Based On Intelligent Construction, Liu Lang, Tao Qiyu, Xu Qigang

Journal of China & Foreign Highway

The traditional precast T-beam faces issues such as excessive diaphragms，difficult formwork installation and removal，and low levels of intelligence in intelligent bridge construction.To address these issues，this paper focused on the optimization of the number of diaphragms and the application of prefabricated diaphragms.By analyzing different diaphragm configuration schemes and comparing the contributions of prefabricated diaphragms and precast diaphragms to the lateral stiffness of the bridge，this paper deeply explored the impact of diaphragms on bridge performance.The research results indicate that the T-beam system with fewer diaphragms is feasible in intelligent construction，but the system without diaphragms places higher demands on the performance of bridge …

3d Reconstruction Method Of Tunnel Surrounding Rock Fracture Based On Vtk, Liu Houxiang, Su Heng

Journal of China & Foreign Highway

Fracture parameters are important reference factors for surrounding rock stability analysis.To realize the visualization analysis of surrounding rock fractures，this paper proposed a three-dimensional （3D） reconstruction method of surrounding rock fractures based on the visualization toolkit （VTK）.Firstly，the collected tunnel surrounding rock images were preprocessed by OpenCV for image grayscale and noise reduction.Secondly，the Otsu method and the open operation in morphology were used to segment the image，and the complete surrounding rock fracture map was obtained.Then，the median method was used to replace the linear interpolation method with the traditional Marching Cubes algorithm in VTK to calculate the equivalent point，and the improved Marching Cubes …

Experimental Study On Deformation Characteristics Of High Liquid Limit Soil Considering The Effect Of Temperature, Li Bangwu, Shen Xuning, Zhang Rui, Chen Yanrong

Journal of China & Foreign Highway

In order to study the influence of temperature on the absorbed bound water and deformation characteristics of high liquid limit soil，the high liquid limit soil in Hunan and Hainan provinces were selected for test.The influence of temperature on the content of bound water was measured by a temperature-controlled water bath volumetric flask test.The consolidation test was carried out on the samples with a one-dimensional temperature-controlled consolidometer，and the variation law of high liquid limit soil deformation affected by temperature was analyzed under the modified pore ratio considering the bound water content.The results show that the absorbed bound water in the high …

Surface Grouting Reinforcement Technology For Shallowly Buried Tunnel In Coastal Zone, Xiang Ze, Deng Shiping, Sheng Zhang, Zhou Ye, Wang Wei, Pei Yabing

Journal of China & Foreign Highway

The Ⅵ level surrounding rock section of a project water intake tunnel is located in the coastal zone，with thick overlying sand layers，broken surrounding rock，and other characteristics.To address these issues，laboratory tests were conducted to explore the effect of water glass volume dosing on the final setting time and strength of cement-sodium silicate （CS） liquid slurry，and field tests were carried out for a comprehensive analysis of grouting methods.The constraint-dispersion mode was finally determined to divide the grouting area into several small grouting units.Advance plastic pipe grouting reinforcement was performed according to the grouting sequence of the outermost circle hole interval first，followed by …

Comparison Analysis Of Different Settlement Prediction Models Under Small Post‑ Constructio N Load On Soft Foundation, Han S Hanpeng, Fu Wei, Zhang Junhui, Lin Chen

Journal of China & Foreign Highway

Settlement deformatio n is a key conc ern in soft foundation construction.Since there is still a small load applied after the filling of soft foundation in the actual project,based on the settlement monitoring data of the high-fill section of Zhaoyang West Ring Expressway in Zhaotong City,Yunnan Province,three settlement prediction methods,namely the hyperbolic method,the three-point method,and the Hoshino method,were used to predict,compare,and analyze the settlement of the fill foundation,and the fitting characteristics of each model were summarized.By comparing the fitting curves and the actual settlement curves,it was found that the loading on the roadbed will cause large errors in the prediction …

Dynamic Response Analysis Of Bridge Under Combined Action Of Random Traffic Flow And Wind Based On Simpack Platform, Xiong Tao, Han Yan, Ma Xingchuan, Li Qianming, Yan Naijie, Zhang Fei, Hu Peng

Journal of China & Foreign Highway

To deal with the time-consuming problem of calculating the dynamic responses of the bridge under the combined action of random traffic flow and wind，a steel box continuous girder bridge was taken as the engineering background，and the finite element model of the bridge and the vehicle model were established in the commercial software Ansys and SIMPACK，respectively.Then，the dynamic responses of the bridge subjected to the single vehicle load，wind loads，and multiple vehicle loads were calculated to verify the superposability of the dynamic responses of the bridge.On this basis，the Monte Carlo method was used to generate the random traffic flow samples.By using the verified …

Research Progress Of Rubber‑Modified Asphalt By Wet Process, Ge Dongdong, Jiang Xiangyang, Lyu Songtao, Zhang Honggang, Song Xiaojin

Journal of China & Foreign Highway

The application of waste tires in asphalt pavements can not only effectively reduce resource consumption but also significantly reduce environmental pollution.Crumb rubber could be obtained by processing waste tires and used as a modifier by mixing with asphalt through the wet process to improve the performance of asphalt.This paper reviewed the research progress of rubber-modified asphalt by wet process and discussed its preparation process，influencing factors of performance，and modification mechanism.By reviewing the relevant studies，the critical conditions in the preparation process and their effects on storage stability were summarized.Furthermore，the effects of rubber dosage，particle size，matrix asphalt type，and preparation parameters on the physical and …

Skid Resistance Detection Technology Of Highway Pavement Based On Tie‑Pavement Coupling Noise, Ye Wei, Chen Fei, Hu Xiaoyang, Xu Zhengwei, Li Liguo

Journal of China & Foreign Highway

In order to improve the skid resistance detection technology of highway pavement，this paper summarized the advantages and disadvantages of the traditional pavement noise measurement methods，adopted the vehicle-following method to collect the tie-pavement coupling noise，and optimized the specific positional parameters of the microphone.The speed correction of the equivalent continuous A-weighted sound level was realized through the fitting of driving speed and equivalent continuous A-weighted sound level.The characteristic signal of the tie-pavement coupling noise was extracted by the principal component analysis method，and it can effectively suppress interference signals such as traffic noise，wind noise，and engine noise.The envelope noise energy （ENE） was obtained by …