Materials Science and Engineering Commons^™

Intelligent Vehicle Path Tracking Control Integrating Road Adhesion Constraints, Zhang Zhiguo, Wang Pu, Zhang Xinglong, Wang Yan

Journal of China & Foreign Highway

In the field of fault-tolerant control for intelligent vehicle path tracking,the existing methods based on model predictive control (MPC ) have limitations.They often assume that the vehicle model parameters are fixed and ignore the impact of dynamic changes in model parameters,which are caused by factors such as vehicle load changes and external environmental interference,on the path tracking accuracy.When the steering system fails,the front wheel steering angle commands calculated by MPC cannot be directly executed and need to be converted into yaw moment control.Although the existing sliding mode yaw moment control methods have strong robustness,the chattering problem affects the stability and …

Research On Parametric Method Of Highway Bim Based On Digital Delivery, Li Jinlong, Wang Xinnan

Journal of China & Foreign Highway

By analyzing the application points and the current situation of digital delivery in each stage of highway engineering construction,this study found that the lack of parameter management and definition in the modification and refinement process of building information modeling (BIM ) source files at each stage led to difficulties in the splitting and refinement of BIM at each stage and even the need for reconstruction.To this end,a method for strengthening the overall planning of the whole life cycle was proposed.By clarifying the demand for model parameters according to the application points of each stage,a mechanism for parameter reservation and classification …

Reconstruction Plan Of Small-Spacing Interchange Connection Sections On Expressway : A Case Study Of Xinlong‒Gangkou Interchange On Zhongshan‒Jiangmen Expressway, Jie Qiang, Fu Xinsha

Journal of China & Foreign Highway

The plan design for the small-spacing interchange connection on the expressway directly affects operational efficiency and driving safety.To achieve the conversion of traffic flow between different expressways,this study explored the reconstruction plan of the connection section under the condition that the interchange spacing did not meet the Design Specification for Highway Alignment (JTG D20‒2017 ) and investigated two connection schemes,including auxiliary lane and collector-distributor lane by taking the Xinlong –Gangkou interchange of the Zhongshan‒Jiangmen Expressway reconstruction and expansion project as an example.The results show that the auxiliary lane is recommended in consideration of the long-term service level,speed coordination,operational efficiency,and engineering …

Research On Bridge Jacking Decision Based On Carbon Emission Analysis, Zhang Xinmin, Hu Chengze, Gao Hongbo, Yang Yunping, Sun Zhihong, Cao Hongyou

Journal of China & Foreign Highway

To lift the longitudinal section of existing bridges in highway reconstruction and expansion projects due to insufficient under-bridge clearance,this study took the reconstruction of a 32.5 m T-beam bridge in the reconstruction and expansion project of the Guangzhou‒Shenzhen Expressway as the research object.By using a carbon emission factor method,carbon emissions of three reconstruction schemes,including broken-column jacking,conversion of bearing pads into bridge piers,and demolition and reconstruction,were calculated under different lifting heights,and the corresponding construction and installation costs were compared.The results show that when the longitudinal section of the bridge is lifted to a certain height,the economic benefits of the broken-column jacking …

Comparative Study On Differences In Asphalt Pavement Design Between China And Southern Africa, Wang Qing, Lin Yangyang, Yan Hongxiang, Zhao Bin, Xia Moxuan, Li Ning, Si Wei

Journal of China & Foreign Highway

To facilitate the successful implementation of projects in the Southern Africa region and promote the application and internationalization of China ’s standards,this study compared the asphalt pavement design systems,construction materials,design parameters,and structural design methods of both regions based on the main asphalt pavement design specifications currently in use in China and Southern Africa.The results show that among Southern African countries,South Africa has a comprehensive and widely applied standard system,while other Southern African countries adopt more varied and less theoretical standards.In contrast,China ’s standard system is complete and highly practical.Due to differences in regional climates,the selection principles and mechanical requirements for …

Distribution Characteristics Of Internal Distress And Maintenance Decision-Making For Asphalt Pavement Based On Three-Dimensional Ground-Penetrating Radar, Li Xiaohua, Song Liang, Ye Wei, Xie Xiaodong, Yang Jiangang, Gao Jie

Journal of China & Foreign Highway

The distribution characteristics of internal distress in pavement structures and the corresponding maintenance decisions are crucial for improving road performance and extending service life.Based on three-dimensional ground-penetrating radar (3D GPR ) technology,this study investigated the internal distress of a 12-kilometer section of both driving and overtaking lanes of an expressway in Hubei Province.High-resolution images of internal pavement distress were obtained,and milling maintenance decisions were optimized by employing these images and a modular decision-making model.Through an efficient and non-destructive technique,the distribution characteristics of internal pavement distress were analyzed,and potential distress types were identified,providing a scientific basis for maintenance decision-making.Data analysis revealed …

Design Of Champlain Bridge In Canada, Xie Yaning, Zhou Yanfeng, Marwan Nader

Journal of China & Foreign Highway

The Champlain Bridge,an iconic gateway spanning the St.Lawrence River in Montreal,showcases not only the excellence of engineering but also becomes an integral part of the city ’s landscape.With a main span of 240 m,the bridge employs a unique single-pylon harp-shaped double-plane cable-stayed structure.The upper pylon is inspired by a tuning fork in its lateral design,while the upper crossbeam artfully mimics the shape of a bow tie,endowing the bridge with a visual beauty that harmoniously blends elegance and strength.The bridge deck,with a total width of 60 m,was the widest double-plane cable-stayed bridge in the world when it was completed.The typical spans …

Investigating The Properties Of Eco-Bricks Composed Of Sawdust, Bamboo, And Varying Composition Of Sugarcane Bagasse Ash And Portland Cement, Wilfred Victor C. Marasigan, Julia Sophia Antonia S. Encarnacion, Czyrus Michael A. Bajeta, Alijah F. Gonzales, Juan Carlo T. Gumangan

Sinaya: A Philippine Journal for Senior High School Teachers and Students

With the construction industry contributing nearly 40% of global greenhouse gas emissions, there is a growing need for innovative and sustainable building materials. This research investigates a new eco-friendly concrete brick incorporating sugarcane bagasse ash (SCBA), sawdust, and bamboo fibers. Three eco-brick mixtures, each containing 2% bamboo fiber and 10% sawdust by weight but with varying proportions of Portland cement (PC) and SCBA, were tested against a standard brick for compressive strength, flexural strength, and water absorption. The optimal mixture, with 2% bamboo fiber by weight, 10% sawdust by weight, 85% PC, and 15% SCBA, exhibits compressive and flexural strength …

Incorporating Recycled And Repurposed Plastic Into 100% Reclaimed Asphalt Pavement, Basant Bhatt

Graduate Theses and Dissertations (2019 - present)

The increasing awareness of sustainability in the asphalt industry has driven the use of recycled materials like reclaimed asphalt pavement (RAP) and waste plastic. This study examines the incorporation of recycled polypropylene (rPP), recycled high-density polyethylene (rHDPE), and recycled low-density polyethylene (rLDPE) at 0.3%, 0.6%, and 0.8% dosages into 100% RAP, along with the warm mix asphalt additive Evotherm® P25. Laboratory tests were conducted to evaluate the mechanical and durability performance of the modified asphalt mixtures while rutting and fatigue life were evaluated using mechanistic-empirical (ME) analysis in PerRoad software. Both plastic type and dosage had a statistically significant impact …

Innovative Design Methodology For Durable Open-Graded Friction Course Asphalt Mixtures, Anas Abualia

LSU Doctoral Dissertations

Open-graded friction course (OGFC) is a thin asphalt mixture surface layer with a high percentage of coarse aggregates and high interconnected air voids, which provides improved skid resistance, visibility, and decreased pavement-tire noise. However, construction personnel at DOTD reported that conventional OGFC mixtures have short service life (raveling distress). Further, their structural contribution to the pavement structure is commonly neglected and designed only for functionality purposes.

The objective of this study was to develop a rational mix design methodology to improve the durability of OGFC asphalt mixtures. Specific objectives are to: (1) conduct a rheological and chemical characterization of polymer-, …

Mechanism Of Mud Pumping On Plateau Highway Under Traffic Loads And Its Treatment Strategy, Zhang Junhui, Chen Zhide, Gao Feng, Na Qicai, Ma Pengfei, Xiao Lin

Journal of China & Foreign Highway

The dynamic hydraulic response and particle migration of subgrade structures under traffic loads are fundamental to reveal the formation and development mechanisms of mud pumping.The driving mechanism of fine particle migration in the mud pumping state was explored by conducting laboratory tests on layered gravel-sandy silt columns under dynamic loads.The results show that the slurry sloshing causes alternating positive and negative pressure gradients within the gravel layer.This oscillating pressure gradient enhances the pore permeability in the underlying sandy silt layer,providing the necessary hydrodynamic conditions for fine particle migration.Fine particle migration increases the slurry turbidity to a stable value.Upon the removal …

Risk Zoning Of Hazards Along Highways To Xizang Based On Information Model, Liu Weimin, Guo Guanmiao, Cai Qing ’E, Yu Xueyong, Dong Xiaobo, Chen Peicong

Journal of China & Foreign Highway

The frequent occurrence of hazards along the highways in the Qinghai ‒ Xizang Plateau seriously affects road traffic and threatens the security of lives and property of the people.Conducting a risk zoning assessment of hazards along the highways to Xizang is crucial to enhancing hazard prevention and mitigation.This paper summarized the regional geological environment and development patterns of hazards along the highways to Xizang and analyzed the overall performance of highway traffic operations.On this basis,the Xinjiang‒Xizang Highway was taken as the research object,and the evaluation factors were selected based on the regional geological environment and the main controlling factors of …

Seismic Performance Of Bridge Pile Foundation Considering Effects Of Material Freeze-Thaw Deterioration And Permafrost Degradation, Zhang Xiyin, Yu Shengsheng, Wang Wanping, Wen Hairong

Journal of China & Foreign Highway

In cold and high-seismic regions,such as the Qinghai‒Xizang Plateau in China,the deterioration of material properties caused by freeze-thaw cycles and permafrost degradation due to climate change have become increasingly severe,posing significant challenges for the seismic performance assessment of bridge pile foundations.To systematically investigate the impact of permafrost degradation and material freeze-thaw deterioration on the seismic performance of bridge pile foundations and ensure proper seismic design,a finite element model was established,considering the dual effects of permafrost degradation and material freeze-thaw deterioration.A comparative analysis was conducted to evaluate the influence mechanisms of various factors on the seismic performance of bridge pile foundations …

Cracking Characteristics Of Cement-Stabilized Macadam With Early Strength Agent Under Variable Temperature And Humidity Curing Conditions, Ge Dongdong, Liu Dingyuan, Lyu Songtao, Jiang Xiangyang, Xue Yanhua, Yu Yang

Journal of China & Foreign Highway

In environments with large temperature variations and low humidity,the curing conditions of cement-stabilized macadam fail to meet the specifications,leading to slow early strength development and increased susceptibility to cracking.This study aimed to investigate the effects of actual environmental temperature,humidity,curing age,and addition of early strength agents on the cracking characteristics of cement-stabilized macadam.Variable temperature conditions were determined based on actual environmental temperature data.Four curing conditions were set by combining temperatures (variable temperature and standard temperature ) with relative humidity of 95%,80%,and 65%,respectively.Three types of specimens were prepared with 0%,10%,and 15% early strength agent contents and cured for 14 and 28 days,respectively.The …

Identification And Prediction Model For Traffic Blockage State Of Highways To Xizang, Wu Ling, Liu Jianbei, Zhang Zhiwei, Shan Donghui, Chi Gandu

Journal of China & Foreign Highway

To identify the traffic blockage state on highways to Xizang in extreme environments,comprehensive evaluation indicators for traffic blockage state based on the entropy-weighted TOPSIS method were proposed by using the traffic blockage event parameters observed on four major highways to Xizang:Sichuan ‒ Xizang Highway,Yunnan ‒ Xizang Highway,Qinghai ‒ Xizang Highway,and Xinjiang ‒ Xizang Highway.The K-Medoids clustering algorithm was used to categorize the traffic blockage state into different levels.By considering factors such as hazard types,road types,traffic volume,and vehicle type ratios,a classification model for the traffic blockage state on highways to Xizang was constructed based on machine learning algorithms.The results show that …

Influence Of Urease-Induced Calcium Carbonate Precipitation On Frost Heave Characteristics Of Saline Soil, Li Jue, Wen Zili, Liu Zhengnan

Journal of China & Foreign Highway

This study investigated the impact of the soybean urease-induced calcium carbonate precipitation (SICP ) technique on frost heave characteristics of saline soil,specifically addressing the frost heave in saline soil used as a subgrade.The relationships between compaction degree,moisture content,volume ratio of the reaction liquid,and curing temperature with the frost heave rate of treated soil were explored.The results show that SICP significantly reduces the frost heave rate of soil samples by over 28%,with the most noticeable improvement occurring under conditions of higher compaction degree and lower moisture content.Additionally,the increased volume ratio of reaction liquid enhances reaction efficiency,while lower curing temperatures are crucial …

Prediction And Evaluation Of Road Service Performance In Cold Regions Based On Uncertainty Quantification Theory, Liu Yuanyuan, Si Junling, Zheng Hao, Ren Daoju, Fan Shaobing, Quan Lei

Journal of China & Foreign Highway

In cold regions,road service performance is influenced by various nonlinear dynamic factors under complex hydrothermal environments and freeze-thaw cycles.Traditional empirical and mechanical models exhibit significant limitations in comprehensively considering the impacts of complex environments and conducting quantitative analyses.This study proposed a method to predict and assess the service performance of constructed roads in cold regions.The method integrated deep neural networks with uncertainty quantification theory,addressing the inadequacies of existing models in adapting to complex environments and analyzing multiple influencing factors.By utilizing data from Montana road sections in the LTPP database,the study employed deep neural networks to predict the international roughness index …

Permanent Deformation Prediction Model Of Subgrade Soil Under Freeze-Thaw Cycles Based On Lstm And Transformer, Zhang Anshun

Journal of China & Foreign Highway

To accurately predict the permanent deformation of subgrade soil under the coupling effect of freeze-thaw cycles and traffic loads,a hybrid neural network model based on long short-term memory (LSTM ) and Transformer was proposed,building upon the results of dynamic triaxial tests.This model effectively captured the temporal dependencies and complex interactive effects among input variables,thereby significantly enhancing the accuracy and generalization ability of permanent deformation prediction of subgrade soil.The results indicate that higher confining pressure improves the resistance of subgrade soil to deformation,but its permanent deformation behavior is still significantly influenced by the magnitude of cyclic loading and the number of …

Analysis Of Joint Load Transfer Performanc E Of Prefabricated Steel‑Concrete Hollow Pavement Slab, Zhu Guangshan, Dong Zihao, Yang Ye, Wang Jinshan

Journal of China & Foreign Highway

In order to study the joint load transfer capacity of a prefabricated steel-concrete hollow pavement slab,a finite element model was established with ABAQUS to carry out numerical analysis.The variation laws of the maximum deflection value and joint load transfer coefficient of the pavement slab with and without cavitation were compared to analyze the load transfer capacity.The results show that when cavitation occurs in the slab,the load transfer coefficient of the slab decreases with the increase in the cavitation area,but the load transfer coefficient of the slab does not change significantly when the cavitation depth reaches a certain level.When there is …

Preparation And Performance Of Emulsified Asphalt With High-Temperature Resistant And Wheel Sticking-Free Effects, Yan Han, Zha Xudong, Kang Xiaogang, Gong Yan, Zhang Zhengji, Zhang Wenshuai

Journal of China & Foreign Highway

To address the problem of wheel sticking at high temperatures in the construction process of existing wheel sticking-free emulsified asphalt of tack coat,this paper adopted the composite modification method of 70# and 15# matrix asphalt and waterborne polyurethane resin (WPR ) to prepare hard asphalt-WPR (HA-WPR )-modified emulsified asphalt in accordance with the high-temperature resistant and wheel sticking-free requirements.Through a series of laboratory tests,the technical performance,wheel sticking-free performance,and interlayer bonding performance of the emulsified asphalt were researched and compared with ordinary wheel sticking-free emulsified asphalt and ordinary emulsified asphalt tack coat oil.The results show that the technical performance of the …

A Review Of Performance Of Cement- Stabilized Base Materials Containing Recycled Conc Rete Aggregate, Song Chengzhe, Li Jiaquan, Kong Jingxun, Zhou Changjun, An Xing

Journal of China & Foreign Highway

Semi-rigid base offers excellent performan ce and is widely used as a high-grade highway subgrade in China.Currently,with a large stockpile of waste concrete in the country,using it as aggregate in pavement base materials is of great significance for environmental protection,energy conservation,and emission reduction.In this paper,the basic performance indicators of recycled concrete aggregate (RCA ) and the performance of cement-stabilized base materials containing RCA,including strength,shrinkage,fatigue,and erosion resistance were reviewed.It finds that the basic performance indicators of RCA are lower than those of natural aggregate.Therefore,the proportion of RCA in base materials may be limited to 20% ‒ 50%.The shrinkage and erosion resistance …

Research Progress Of Modified Asphalt With Graphene Materials, Zhang Zongwei, He Kai

Journal of China & Foreign Highway

To clarify the research status of mo dified asphalt properties with graphene materials,relevant research literature in China and abroad was consulted to compare the effects of various graphene materials and preparation parameters on asphalt.The results show that graphene,nano graphite sheets,and oxidized graphene can improve the microstructure and road performance of asphalt,increase the service life of asphalt,and reduce the maintenance cost of asphalt.Continuously optimizing the preparation parameters of modified asphalt and exploring the mechanism of modified asphalt with new material not only help the promotion and application of new road asphalt technologies but also reduce energy consumption,pollutants,and carbon emissions,providing new ideas …

Model Analysis Of Axial Compressive Mechanical Properties Of Concrete Column Constrained By Textile-Reinforced Engineered Cementitious Composites, Ma Gao, Wang Zhaoyang

Journal of China & Foreign Highway

In order to avoid the problem of matrix cracking in textile-reinforced concrete (TRC ),a reinforcement method of textile-reinforced engineered cementitious composites (ECC ),namely TRECC composed of textile and high-performance ECC was proposed.However,the research on the axial compressive mechanical properties of TRECC-constrained concrete in China and abroad is still insufficient,and there is a lack of reliable strength and ultimate strain analysis models.A total of 116 axial compression test results of TRC-constrained concrete columns and 125 axial compression test results of TRECC-constrained concrete columns were collected.The confinement mechanisms and failure modes of TRECC and TRC-constrained concrete were compared.Then,the strength models and ultimate …

Mechanical Performance Of Nuts In Tie Rod Assembly Of Anchorage System Of Suspension Bridge, Liu Zheng, Li Zhao, Qin Guifang, Xie Qinjian, Jiang Yuangen, Zhang Jiyong, Wang Lei, Ma Yafei

Journal of China & Foreign Highway

In order to investigate the stress and fatigue performance of nuts in the tie rod assembly of the anchorage system of a long-span suspension bridge,the finite element software Ansys and Abaqus were used to establish the full bridge model and the local finite element models of the tie rod and the hexagonal nut,respectively.Secondly,the whole process variation law of the synergistic force of the tie rod and the nut under the axial tensile load was revealed.The difference in mechanical performance between slotted nuts and unslotted nuts was compared,and the detailed structural parameters of slotted nuts were optimized.Finally,the static tensile and fatigue …

Installation Direction Design And Construction Control Of Sliding Bearing Of Continuous Girder Bridge, Guan Changlu, Sun Xiudong, Dong Hao, Wang Xingzhou

Journal of China & Foreign Highway

Continuous girder bridges can improve the structural stress,increase the structural bearing capacity,and promote ride comfort.However,some continuous girder bridges suffer from issues such as bearing dislocation,upper torsion,and damage to seismic arrestors.To identify deficiencies in current design and construction control,an in-depth analysis of these issues was conducted.The findings reveal the main reason is that the bidirectional sliding bearings (nearly half of the total ) fail to provide horizontal force,and the main sliding direction of the unidirectional sliding bearings is inconsistent with the deformation of the bridge superstructure.In this paper,factors including temperature-induced deformation,material shrinkage,elastic compression,creep,and construction process control of the bridge superstructure were …

Crack Propagation Of Vehicle‑Steel Bridge Deck Slabs Based On Pavement Damage, Tang Sheng, Yin Xinfeng, Zhang Ming, Yan Wanli

Journal of China & Foreign Highway

In order to study the influence of vehicles under different pavement damage conditions on crack propagation of welded toe at the roof of steel bridge deck slabs,finite element models of suspension bridges,fine vehicles,and local steel bridge deck slabs were established,and multiple groups of obstacle heights were set to simulate pavement damage.The explicit dynamic analysis program was used to simulate vehicle-bridge coupling vibration and extract the forces of vehicles on the steel bridge deck slabs at different lanes,speeds,and obstacle heights.The crack propagation life of the welded toe at the roof was obtained by applying them to a local steel bridge deck …

Calculation Of Socket Depth For Circular Pipe Pier-Bearing Platform Socket Connection, Chen Jingli, Xiao Feng, Wang Zhigang, Wang Zhihai, Xu Yan

Journal of China & Foreign Highway

The minimum socket depth for circular pipe pier-bearing platform socket connection can be calculated according to Article C.0.3 in the Specifications for Design of Highway Precast Concrete Bridges (JTG/T 3365 -05—2022 ).In order to enable engineering designers to fully understand and correctly apply the calculation formula in this article,this paper first introduced the main technical features of the typical connection scheme,as well as the structural failure principles and objectives formulated in the specification of the typical connection scheme.Then,it briefly introduced the experimental research content and results of the typical connection scheme and explained the key construction measures and their functions …

Key Techniques For Constructing Flexible Geosynthetic Reinforced Soil Abutments, Yu Xiaoxiao, Xu Chao, Li Haoyu, Zuo Binli

Journal of China & Foreign Highway

The flexible geosynthetic reinforced soil (GRS ) abutments offer several advantages,including cost saving,reduced bridgehead misalignment,and good seismic performance,showing great potential for application in transportation engineering both in China and abroad.The flexible GRS abutment is essentially composed of a composite structure formed by closely spaced layers of geosynthetic reinforcement material,and the construction quality and load-bearing capacity are crucial to the success of the project.To ensure construction quality and study the construction process of flexible GRS abutments,a construction site monitoring method was adopted.Based on the experience from the construction of a vehicular overpass on the Wuwei ‒ Yuexi Expressway,the quality control measures …

Reliability Analysis Of Long‑Span Concrete Box Arch Bridge Under Temperature Effect Combinations, Zheng Junlin, Jiang Youbao, Zheng Xinhao, Lu Naiwei

Journal of China & Foreign Highway

The existing design methods for concrete arch bridge structures do not consider the random characteristics of the eccentricity generated by load effects and overlook the influence of stochastic eccentricity on structural reliability.To address this deficiency,a calculation model for eccentricity under temperature effect combinations was derived.The random characteristics of eccentricity for different sections of the main arch of concrete arch bridges and their sectional bearing capacities were analyzed under different load parameter combinations.By utilizing the Monte Carlo method,reliability indices were computed for different sections of the main arch and different load parameter combinations after considering the random characteristics of eccentricity.The results …

Static Performance And Stability Of A Multi-Span Hybrid Continuous Rigid Frame Bridge With High Piers, Huang Yu, Liu Guanyu, Yi Jianbo, Xing Xuan, Su Miao, Peng Hui

Journal of China & Foreign Highway

In order to study the static performance and stability of a steel-concrete composite continuous rigid frame bridge in Suichang,Zhejiang Province,a single girder and girder lattice finite element model for the whole bridge was established by using Midas Civil,and a local solid finite element model was established by using Ansys.A detailed analysis of the structural displacement and stress state of the bridge in use and the local stress in the solid section of the pier and girder under different loads was carried out.The influence of the pile-bottom restraint stiffness and pier-girder connection form on the overall stability of the bridge was …