Engineering Education Commons^™

System Design And Integration For Repeated Impact Tests, Cheng Lin, Gene Hou, Sebastian Bawab, Timothy Coats, Hesham Nassar

Engineering Technology Faculty Publications

The design and integration of an impact-testing machine is particularly for the test of an object which is repeatedly dropped down from a specified height. Four linear actuators with two on each of the two magnetic rails are used to lift up an object weighing up to 70 lbs. Each actuator is powered and controlled by an industrial amplifier. A Programmable Logical Controller (PLC) is applied to activate these four actuators simultaneously and repeatedly. Accelerometers using an National Instruments (NI) data acquisition system are used to measure the impact force during the tests. Students gain design and implementation experiences from …

A Comparison Of Instructional Delivery Methods Based On Student Evaluation Data, John Hackworth, Carol Considine, Vernon Lewis

Engineering Technology Faculty Publications

Distance Education is an increasingly common educational delivery method. At Old Dominion University, all junior and senior level engineering technology courses are offered via distance education at least once every two years. A majority of courses in the distance education system at this university have three simultaneous delivery methods: on-campus, televised (receiving the course at an off-campus site via satellite video/audio), and internet-based video-streamed.

This paper explores the results of student course evaluation surveys for trends, in particular those trends which can be a result of the mode of delivery. Results of these surveys for 23 courses over a 4-year …

Exceed Teaching Workshop: Tenth Year Anniversary, Allen Estes, Ronald Welch, Stephen Ressler, Norman Dennis, Debra Larson, Carol Considine, Tonya Nilsson, Jim O'Brien, Thomas Lenox

Engineering Technology Faculty Publications

In response to the need for faculty training, the American Society of Civil Engineers developed and funded the ExCEEd (Excellence in Civil Engineering Education) Teaching Workshop that is today - the summer of 2008 - celebrating its tenth year of existence. For the past decade, nineteen ExCEEd Teaching Workshops (ETW) have been held at the United States Military Academy, the University of Arkansas, and Northern Arizona University, with two more workshops scheduled for this summer for a total of 21 offerings. ETW has realized 449 graduates from 203 different U.S. and international colleges and universities. This paper summarizes the content …

Design And Develop A Cost Effective Microcontroller Training System For Distance Learning Engineering Students, Steve Hsiung, John Ritz, James Eiland

Engineering Technology Faculty Publications

This is the review of a NSF funded project that addresses the hands-on distance learning needs in microprocessor/microcontroller related courses. A research team designed a low cost training system with supporting instructional materials to assist the teaching of these concepts. Individual laboratory activities are being developed to reinforce student learning and skill development in programming concepts. This basic system format eventually will support an array of technology courses. This project involves two community colleges, Blue Ridge Community College (BRCC), VA and Olympic College (OC), WA, and a four-year university, Old Dominion University (ODU), VA, in a collaborative research team to …

An Integrated Simulation Design With Three-Dimensional Motions And A Hydraulic Stewart Simulator, Cheng Lin, Gene Hou, Yuzhong Shen, Hector Garcia

Engineering Technology Faculty Publications

This paper presents an integrated design process and tests of a Stewart simulator with a virtual visualization tool, which uses Virtools to create and generate three-dimensional motions. An inverse kinematic algorithm is written to convert each visualized motion to the displacements of six cylinders in a Stewart motion simulator. Information of the displacements is then transferred through the User Datagram Protocol (UDP) to a personal computer which has the LabVIEW software. An NI USB-6251 data acquisition device is applied to interact with the LabVIEW program and the Stewart hydraulic simulator. The approach presented in this paper to function an old …

Introducing Hands-On Simulation Activities In Introduction To Engineering & Engineering Technology Class To Keep Students Engaged, Alok Verma

Engineering Technology Faculty Publications

Low enrollment and high attrition rates have often plagued Engineering and Engineering Technology programs. Part of this problem can be attributed to the lack of engaging hands-on activities during the first year of instruction. Most engineering and technology programs require students to take natural science, math and some general education courses during the first two years with minimal technical content. To maintain student's interest in the technical career path, it is important that students establish a link between the theoretical knowledge and its application to solve real life problems early in their learning experience. Simulation based activities have a proven …

Applying Six Sigma Methodology To The Admissions Process In Higher Education, Alok Verma

Engineering Technology Faculty Publications

Time and quality are two important metrics for improving a company's production and profit performance. Six Sigma is one of the most powerful continuous improvement tools that have been used to improve the quality of products and business processes. Six Sigma methodology provides the techniques and tools to improve the capability and reduce the number of defects in any process. It was originally developed by Motorola to systematically improve processes by eliminating defects. Although, originally developed for manufacturing processes, the tool has been effectively applied to improve business processes also. Evaluation of applications for admission in higher education is often …

Using Basic Computer Aided Drafting And Design Courses At The Freshman Level To Improve Technology Students Competitiveness In Obtaining Early Academic Career Internships, Anthony Dean, Mustafa Moustafa, Julie Moustafa

Engineering Technology Faculty Publications

Many students have the desire to have internships and part-time employment during their academic careers. Often students in their freshman and sophomore years in four year engineering and technology programs find it difficult to be competitive against more senior students for these positions. This paper discusses how students, in the Mechanical Engineering Technology (MET) program at ________________University, through taking CAD and Solid Modeling courses early in their academic careers are well suited to be competitive in obtaining internships and part time employment. This paper discusses the MET programs first two years’ curriculum and how it prepares the students to enter …

A General Engineering Technology Program In Motorsports Technology, Gary Crossman, Anthony Dean

Engineering Technology Faculty Publications

Southside Virginia, in particular the cities of Danville, Martinsville and the surrounding area, is the home of Virginia International Raceway and a rapidly growing motorsports industry. There is a strong need for educational opportunities to support manufacturing and related industries in this region. In the early 2000’s Patrick Henry Community College in Martinsville established an associate of applied science degree in Motorsports Technology to help meet the need for technical support personnel. As the industry has grown it has become evident that engineers and technologists are needed at the baccalaureate and masters levels. Old Dominion University (ODU), located in Norfolk, …

Training For Adjunct Faculty, Ronald Welch, Allen Estes, Carol Considine

Engineering Technology Faculty Publications

Professor, teacher, instructor, faculty member –all are cherished and incredibly important titles at any university. At the same time, every full-time faculty member knows that it took time to become a good teacher and that training and mentoring shortens the required train-up period. Members of the Civil Engineering Department Heads Council Executive Committee (DHCEC) have indicated that the American Society of Civil Engineers (ASCE) ExCEEd Teaching Workshop is a must have tool for developing new faculty. So why do we thrust a syllabus into the hands of adjunct faculty and wish them well – while it appears that some type …

Stochastic Models For Enhancing Agility Of Supply Chains, Alok K. Verma

Engineering Technology Faculty Publications

This paper deals with the application of stochastic inventory model to the three-tier supply chain and verifying the values obtained by mathematical model with discrete event simulation. We investigate three-stage serial supply chain with stochastic demand and fixed replenishment lead-time. Inventory holding costs are charged at each stage, and each stage may incur a consumer backorder penalty cost charged by primary supplier to secondary supplier. The customer-demand follows Poisson distribution. We implement Base Stock model for inventory control at both suppliers. Computer simulation is then designed in such a way that it satisfied all the assumptions for mathematical model. Simulation …

Addressing Student Retention In Engineering And Engineering Technology Through The Use Of A Multidisciplinary Freshman Course, Anthony Dean, Bonita Anthony, Linda Vahala

Engineering Technology Faculty Publications

The Engineering Fundamentals Division of the Batten College of Engineering and Technology (BCET) at Old Dominion University administers a freshman engineering course sequence, along with four engineering departments (Mechanical Engineering, Civil and Environmental Engineering, Aerospace Engineering, and Electrical and Computer Engineering) and the Department of Engineering Technology (which offers degrees in Mechanical Engineering Technology, Civil Engineering Technology and Electrical Engineering Technology). The two course sequence, Exploring Engineering and Technology I and II, involve the five departments in teaching at least one five week module in each of the two courses. Each department generally involves the students in a basic design …

Introducing Freshmen To Construction Estimating And Scheduling Using K'Nex Bridge Kits, Carol Considine, Vernon Lewis

Engineering Technology Faculty Publications

The College of Engineering and Technology at Old Dominion University has developed project-based courses for freshmen engineering students in order to engage them in engineering early with the goal of increasing retention. The courses are divided into three five-week modules that are distributed among the various departments within the college. The Engineering Technology department is responsible for two of the five week modules. One module is comprised of all the engineering technology curriculums; civil, electrical and mechanical, and the other module is strictly a civil engineering technology project.

The civil engineering technology project is focused on the construction industry. Students …

Managing A Distance-Learning Eet Laboratory Course Using Collaboration Software, Steve Hsiung, John Hackworth, Richard Jones, June Ritchie

Engineering Technology Faculty Publications

Methods of managing various distance learning EET laboratory courses using collaboration software are detailed. Particular emphasis is given to different types of collaboration software, advantages and disadvantages of each, and student and faculty feedback on the effectiveness of each.

Identifying University Minors To Support The Construction Specialization Area Within A Civil Engineering Technology Program, Vernon Lewis, Carol Considine

Engineering Technology Faculty Publications

Construction programs at many universities are diversified and provide students with opportunities to examine topic areas that include mechanical and electrical systems, safety, business administration, residential construction, real estate, and management. It is impossible for small civil engineering technology programs with a construction emphasis to encompass all of these expertise areas. As industry looks for students with a knowledge base in these areas, it is incumbent upon programs to find avenues to provide these educational opportunities to their students.

To meet the upper division general education requirements for Old Dominion University, students must have either a minor, second major or …

Enhancing Student Learning In Engineering Technology Programs? A Case For Physical Simulations, Alok Verma

Engineering Technology Faculty Publications

Physical simulations have a proven record as a teaching tool. Concepts that are often hard to grasp are made easy by the use of physical simulation activities. The constructivism learning theory suggests that people learn better by actively participating in the process of learning. According to the Encyclopedia of Educational Technology, "Simulation-based learning involves the placement of a student into a realistic scenario or situation. The student is then responsible for any changes that occur as a result of their decisions." A number of physical simulation based tools have been developed by the author for use as instructional tools to …

Introducing The Engineering Technology Programs To All Incoming Freshmen Engineering And Technology Students–The Result Is Better For All, Gary Crossman, Anthony Dean

Engineering Technology Faculty Publications

The Department of Engineering Technology at Old Dominion University participates in a freshman engineering course sequence, along with four engineering departments in the Batten College of Engineering and Technology. The two course sequence, Exploring Engineering and Technology I and II, involve the five departments in teaching at least one five week module in each of the two courses. Each department generally involves the students in a basic design project related to its discipline. Since the Department of Engineering Technology has three main programs – Civil, Electrical, and Mechanical – it has elected to divide its five week segment into three …

Teaching Lean Manufacturing Concepts Using Physical Simulations Within Engineering Technology Program, Alok Verma

Engineering Technology Faculty Publications

Physical Simulations have a proven record as a teaching tool. Concepts that are often hard to grasp are made easy by the use of physical simulation activities. The constructivism learning theory suggests that people learn better by actively participating in the process of learning. Effectiveness of simulation-based learning is well recognized. According to the Encyclopedia of Educational Technology, "Simulation-based learning involves the placement of a student into a realistic scenario or situation. The student is then responsible for any changes that occur as a result of their decisions." The computer integrated manufacturing course in the mechanical engineering technology program was …

A Hybrid Course In Fundamentals Of Building Construction Using Combination Archived Video And Live Session Distance Learning, Vernon W. Lewis Jr., Carol L. Considine, June Ritchie

Engineering Technology Faculty Publications

A course in the Fundamentals of Building Construction has been a curricular requirement of the Civil Engineering Technology Program (CET) since its inception. This course was taught traditionally as an on-campus class. Over the last ten years, the CET program has expanded to contain an extensive distance learning component, with at least half of the enrollment located off campus. The model for the typical distance-learning class is to meet for three hours, once a week, with a fully interactive (voice) live class. In consideration of the demand of a growing distance learning system, it was decided to restructure this class …

A Comparison Between Frequent Out-Of-Class Assignments And Frequent In-Class Assessments Relative To Student Performance In A Sophomore Level Electrical Circuit Analysis Course, Isaac Flory, Christian Hearn

Engineering Technology Faculty Publications

Two parallel sections of a sophomore level circuit analysis course in Electrical Engineering Technology were structured to provide insight to the marginal utility of out-of-class assignments versus in-class assessments in academic performance. Student distributions for each section, the classroom model, the composition of the common tests and exam, and grading formats are discussed. The data presented and the conditions of the resulting observations indicate the model which favored out-of-class assignments led to improved test scores.

Designing A Microcontroller Training Platform For Active Distance Learning Engineering And Technology Students, Steve C. Hsiung, James E. Eiland, John R. Hackworth, John Ritz

Engineering Technology Faculty Publications

This is an active distance-learning project that addresses the hands-on microprocessor/ mi-crocontroller-related courses. A research team designed a low-cost training system with supporting instructional materials to assist the teaching of these concepts. Individual laboratory activities are being developed to reinforce student learning and skill development in programming concepts. This basic system format eventually will support an array of engineering and technology courses. This project involves two community colleges, Blue Ridge Community College (BRCC) and Olympic College (OC), and a four-year university, Old Dominion University (ODU), in a collaborative research team to design and develop a specific PIC microcontroller training system …

An Assessment And Continuous Improvement Model For Engineering Technology Programs, Alok Verma, Gary Crossman

Engineering Technology Faculty Publications

Assessment and continuous improvement are essential and critical processes for higher education. Development and implementation of such processes are not only required by the Accreditation Board for Engineering and Technology (ABET) but it is also a necessary condition for the maturation and development of any engineering technology program. The assessment and continuous improvement plan discussed here was developed at Old Dominion University (ODU) and implemented during the last accreditation cycle within the Engineering Technology Department. The plan is based on two cycles of assessment and evaluation, a short cycle of one year and a long term cycle of three years. …

Developing A New Program In Marine Engineering Technology, Anthony Dean, Gary Crossman, Alok Verma

Engineering Technology Faculty Publications

The Department of Engineering Technology, in the Batten College of Engineering and Technology at Old Dominion University, in conjunction with members of its advisory board and other industry representatives have begun a sustained effort to promote and develop a strong course of study in Marine Engineering Technology. Located in Norfolk, Virginia, Old Dominion University, and particularly the Department of Engineering Technology, is uniquely positioned to develop such a program. With strong ties to the world's largest Naval Base and superlative shipbuilding, maintenance and repair facilities, early qualitative research indicated high interest for development of such a program in support of …

A New Approach In Microprocessor/Microcontroller Courses/Laboratories Material Design And Development, Steve C. Hsiung, Jeff Willis

Engineering Technology Faculty Publications

Courses in microprocessors and microcontrollers are standard parts of the Engineering Technology core curricula. The traditional course material developments include both lectures and associated laboratory exercises. No matter how creative is the curriculum; it is usually budgetary constraints that confine the creativity when developing new curricula. This limits the freedom of the major approach in new course development.

This article demonstrates new course lecture and laboratories material development that starts from ground up with both a hardware platform and simulation software design for microprocessor/microcontroller related courses. It is not only very cost effective, but also does not limit the instructor's …

Implementing Simple Protocols In Multiple Processors Control Applications, Steve Hsiung, Tyson Mccall, Corinne Ransberger

Engineering Technology Faculty Publications

Using microprocessor/microcontroller in various control applications is not only one of the major topics in Engineering Technology curricula, but also of interest in industry applications. To accomplish it correctly the process of designing application programs starts from the individual module development through extensive testing, verification, and modification. Applying these developed modules in a useful manner requires the links and integrations that lead to the practical project implementation. Frequently, in students' senior project designs and faculty's research plans, the microprocessor/microcontroller resources become scarce or cause conflicts during the modules' integration stage. To accommodate the shortfall of the resources and resolve any …

A Template Functional-Gage Design Using Parameter-File Table In Autodesk Inventor, Cheng Lin, Moustafa Moustafa

Engineering Technology Faculty Publications

A systematic approach using Autodesk Inventor to design the functional gages of Geometric Dimensioning & Tolerancing (GD&T) is presented. The gages can be used to check straightness, angularity, perpendicularity, parallelism, and position tolerances of a part when geometric tolerances are specified with Maximum Material Condition (MMC). Four steps are proposed to accomplish the task: (1) creation of two-dimensional (2-D) initial template files, (2) generation of hierarchical folders for the template files, (3) creation a 3-D gage model from a specific template file, and (4) dimensioning and generation of the gage drawing. Results show that, by following this approach, students can …

The Administration Of Senior Design Projects In A Distance Learning Environment, Isaac L. Flory Iv, John R. Hackworth

Engineering Technology Faculty Publications

A method for administering a senior level capstone design course in Electrical Engineering Technology in a distance learning environment is described. Several avenues are explored that help the students successfully conceive, develop, and present their design projects from off- campus locations that are consistent with the requirements placed upon their on-campus peers. Several problems that are unique to offering a senior project course in a distance learning environment are explored and solutions are described.

Physical Simulations In Classroom As A Pedagogical Tool For Enhancing Manufacturing Instruction In Engineering Technology Programs, Alok K. Verma, Han P. Bao, Anand Ghadmode, Swanand Dhayagude

Engineering Technology Faculty Publications

Lean is a powerful philosophy that advocates minimization of waste within an organization. The adoption of Lean Manufacturing philosophy by major manufacturers has created a demand for qualified personnel in this area. Higher education is not far behind in incorporating this philosophy into their curriculum. A number of universities have started offering both graduate and undergraduate courses in Lean Manufacturing. Physical simulations are often an integral part of these courses. Simulation based Lean enterprise concepts have been introduced in an undergraduate course in mechanical engineering technology program at Old Dominion University. Results show increased student participation and better understanding of …

Lessons Learned And Best Practices For Using An Analytic Strategy Approach For The Creation Of Virtual Laboratories For Distance Learning In Engineering Technology, Anthony W. Dean, Carol L. Considine, Gary R. Crossman

Engineering Technology Faculty Publications

This paper describes the use of an Analytic Strategy Approach used in the development of a Virtual Automation and Controls Lab in the Mechanical Engineering Technology Program of the Engineering Technology Department at Old Dominion University. This paper looks at the three phases, as applied to the development of a virtual lab using an analytic strategy design:

(1) Formulation of the quantitative and qualitative approach to assist in decision process,

(2) Quantitative and qualitative analysis of the decision alternatives - within the decision context,

(3) Interpretation of the analysis results and implications for decision.

Privatization Initiatives: A Source For Engineering Economy Case Studies, Paul Kauffmann, Tarek Abdel-Salam, Keith Williamson, Carol L. Considine

Engineering Technology Faculty Publications

A case study method which reviews the basic structure of the circular A-76 privatization decision model is discussed. It highlights the possibilities for development of case studies that can challenge student teams to apply engineering economy tools while developing skills in a range of circular areas that are important to undergraduate engineering education and career success in engineering practice. Beyond building quantitative and qualitative business analysis skills, engineering economy cases can enhance student skills in other topical areas such as technical presentations, and report writing. The privatization initiatives and related decision models can also enhance human relations oriented skills in …