VLSI and Circuits, Embedded and Hardware Systems Commons^™

Dashboard, Bradley Manuel Levin, Kyle Matthew King

Computer Engineering

Modern gamers are always looking for new and exciting ways to play board games. Our senior project, DashBoard, is intended to capitalize on this interest and upgrade board games to have pre-programmed moves and easy piece moving. It is a proof-of-concept project for a programmable chess-style game board using an electromagnet array to move the pieces around the board. With an easily programmable interface with the Raspberry Pi 3, users can make their own programs or find ones others have made online to move pieces in creative ways.

Tidalsim Senior Project Report, Kent Zhang, Colin Vandervoort

Computer Engineering

Throughout the course of this project, our team helped the Cal Poly Biological Sciences department refine an intertidal zone simulator. The aim of this device is to allow any marine biologist to easily simulate a vast range of tidal zones in order to test animal behaviors within these zones. Another goal of this project is to make each simulation tank independent from the others by using a single microcontroller to handle all inputs and outputs of the system as well as logging all relevant data. The current system is set up so that a separate microcontroller handles dissolved oxygen and …

Frequency Modulation Integrated Circuit For Radars, Jade S. Visutsiaz, Hue Thu Doung

Electrical Engineering

Frequency-modulated continuous wave radars are a type of radar capable of measuring the distance to a stationary object or velocity of a moving object by radiating a continuous transmission of a signal that linearly sweeps its frequency repeatedly between two set frequencies. Frequency-modulated continuous wave radar signals are generated by a high frequency voltage-controlled oscillator or digital-to-analog converter. This project is an integrated circuit that produces the frequency-modulated signal on a single chip in the analog realm. The circuit was designed using Cadence Virtuoso with TSMC 180 nm process technology model. The generated signal is intended for use with ultra-wideband …

Automatic Gain Control Integrated Circuit, Kyman Huang, Garth Leung, Lauren Williams

Electrical Engineering

This paper aims to describe the design process of an automatic gain controller (AGC) integrated circuit. An AGC is intended to provide variable gain in order to produce a consistent, distortionless output with a wide range of input magnitudes. This implementation was created as a standalone, small IC for audio systems. The chip requires only 7 pins, allowing for a small 8-pin package. LTSpice was used for the circuit design process and initial simulation. Cadence Virtuoso was used for the circuit layout and further simulations. Xilinx Vivado was used for digital circuit design and initial simulations. This project set out …

Analog Single Sideband-Pulse Width Modulation Processor For Parametric Acoustic Arrays, Vikrant A. Marathe

Master's Theses

Parametric acoustic arrays are ultrasonic-based loudspeakers that produce highly directive audio. The audio must first be preprocessed and modulated into an ultrasonic carrier before being emitted into the air, where it will self-demodulate in the far field. The resulting audio wave is proportional to the double time-derivative of the square of the modulation envelope. This thesis presents a fully analog processor which encodes the audio into two Pulse Width Modulated (PWM) signals in quadrature phase and sums them together to produce a Single Sideband (SSB) spectrum around the fundamental frequency of the PWM signals. The two signals are modulated between …

Cmos Design Of An 8-Bit 1ms/S Successive Approximation Register Adc, Ameya Vivekanand Ganguli

Master's Theses

Rapid evolution of integrated circuit technologies has paved a way to develop smaller and energy efficient biomedical devices which has put stringent requirements on data acquisition systems. These implantable devices are compact and have a very small footprint. Once implanted these devices need to rely on non-rechargeable batteries to sustain a life span of up to 10 years. Analog-to-digital converters (ADCs) are key components in these power limited systems. Therefore, development of ADCs with medium resolution (8-10 bits) and sampling rate (1 MHz) have been of great importance.

This thesis presents an 8-bit successive approximation register (SAR) ADC incorporating an …

Experimental Study And Modeling Of The Gm-I Dependence Of Long-Channel Mosfets, Michael Fong Cheng

Master's Theses

This thesis describes an experimental study and modeling of the current-transconductance dependence of the ALD1106, ALD1107, and CD4007 arrays. The study tests the hypothesis that the I-gm dependence of these 7.8 µm to 10 µm MOSFETs conforms to the Advanced Compact Model (ACM). Results from performed measurements, however, do not support this expectation. Despite the relatively large length, both ALD1106 and ALD1107 show sufficiently pronounced ‘short-channel’ effects to render the ACM inadequate. As a byproduct of this effort, we confirmed the modified ACM equation. With an m factor of approximately 0.6, it captures the I-gm dependence with sub-28% maximum error …

Asic Design Of Rf Energy Harvester Using 0.13um Cmos Technology, Jainish K. Zaveri

Master's Theses

Recent advances in wireless sensor nodes, data acquisition devices, wearable and implantable medical devices have paved way for low power (sub 50uW) devices. These devices generally use small solid state or thin film batteries for power supply which need replacement or need to be removed for charging. RF energy harvesting technology can be used to charge these batteries without the need to remove the battery from the device, thus providing a sustainable power supply. In other cases, a battery can become unnecessary altogether. This enables us to deploy wireless network nodes in places where regular physical access to the nodes …

Genetic Algorithm Amplifier Biasing System (Gaabs): Genetic Algorithm For Biasing On Differential Analog Amplifiers, Sean Whalen

Computer Engineering

Genetic Algorithm Amplifier Biasing System (GAABS) - Senior Project Analysis

Summary of Functional Requirements

This project integrates LTSpice with a python script that runs a genetic algorithm to bias a differential amplifier. The system biases the amplifier with 2 different voltages, the base voltage for the PNP BJTs of the active loads and a voltage controlling the current of the current sink. The project runs via a python script, gets data from LTSpice’s command line call, and iteratively runs until the system is biased to achieve the greatest gain on an arbitrary input voltage.

Primary Constraints

Some of the main …

Metrology Computer Redesign, Natalie Lizama, Melinda Ong, Mitchell Aiken

Electrical Engineering

We are M[EE]² and our project is to redesign Micro-Vu’s metrology computer (the Q16) with modern components and updated firmware. Metrology machines take high precision and high accuracy measurements, and a computer attached to each machine reads out the measurements. We will be redesigning the logic and display circuit boards on the Q16. The ports and communication methods with the machine will stay the same as it must be a drop-in replacement.

The motivation behind the redesign stems from the age of the current design. The current design was created in 1986, and has not had significant modifications since. …

Portable High-Definition Audio Spectrum Analyzer, Alex Zahn, Jamie Corr

Electrical Engineering

The Portable High-definition Audio Spectrum Analyzer (PHASA) allows the user to visualize the audio frequency spectrum of an incoming line-level stereo audio signal. Upon pressing the touch screen spectrum graph, the PHASA displays the corresponding frequency and volume levels as well as crosshairs at the touched location. The PHASA features multiple left/right channel display modes— Left channel only, right channel only, both channels simultaneously, and the average between the two channels. The PHASA features multiple resolution display modes (standard-resolution and high-resolution) and multiple dynamics display modes (standard dynamics, averaging, and peak/hold). The PHASA accepts input audio via a 1/4" TRS …

Arm Mke1xf Mcu Replatform, Nathan Hong, Derek Lung, Japsimran Singh, Bevin Tang

Computer Engineering

After Cal Poly Racing’s electrical team began to hit the technical limits of the ADC and other I/O features of the current 8-bit Atmel AT90 microcontroller unit, it became clear that an upgrade was due. This replatforming project takes the functionalities of the old, 8-bit architecture, and aims to provide a 32-bit version using the ARM MKE1xF MCU. With the idea of having a working PCB as a stretch goal, the scope of the library development was limited to enable base functionality. Thus, the only libraries developed were for the Timer, ADC, SPI, UART, and CAN. Additionally, this document discusses …

Differential Power Analysis In-Practice For Hardware Implementations Of The Keccak Sponge Function, Nathaniel Graff

Master's Theses

The Keccak Sponge Function is the winner of the National Institute of Standards and Technology (NIST) competition to develop the Secure Hash Algorithm-3 Standard (SHA-3). Prior work has developed reference implementations of the algorithm and described the structures necessary to harden the algorithm against power analysis attacks which can weaken the cryptographic properties of the hash algorithm. This work demonstrates the architectural changes to the reference implementation necessary to achieve the theoretical side channel-resistant structures, compare their efficiency and performance characteristics after synthesis and place-and-route when implementing them on Field Programmable Gate Arrays (FPGAs), publish the resulting implementations under the …

Electronic Drum Machine (E.D.M), Nyssa Marie Backes

Electrical Engineering

Many people argue that a drummer plays the most important role in a band of any genre. During live performances, the other band members rely on the drummer to keep the song moving forward at a proper steady pace. Even in recorded music, drums help listeners sing and dance along with their favorite songs. Thus, achieving success as a band, both in terms of recordings and live shows, absolutely requires a drummer. So, if a band does not have a drummer, and cannot afford the hefty cost of hiring a session drummer, a touring drummer, or both, how can they …

Remote Cable Gantry, Allen L. Bailey

Electrical Engineering

The Remote Cable Gantry is a robotic system that was initially intended to aid in the art of aerial videography. It was designed to enable novice and expert users alike to capture both video footage and audio from perspectives unachievable by current methods. This system uses a series of cables to control the position of a camera gimbal in a defined 3D space and, as a self-contained unit, is portable and easy to use. The Remote Cable Gantry offers a quiet, intuitive, and safe alternative to existing technology, which has been limiting the market and potential of aerial photography and …

Music Synthesizer Senior Project: Danalog, Vikrant A. Marathe

Electrical Engineering

The Danalog is a 25 key portable digital music synthesizer that uses multiple synthesis methods and effects to generate sounds. Sound varieties included three synthesis methods including FM, subtractive, and sample-based, with up to eight adjustable parameters, at least four effects, including reverb, chorus, and flange, with five adjustable parameters, and at least two note polyphony, and a five band equalizer. The user would be able to adjust these effects using digital encoders and potentiometers and view the settings on two LCD screens. The finals project was unable to meet the original design requirements. The FM synthesis method was primarily …

Danalog: Digital Music Synthesizer, Evan R. Lew

Electrical Engineering

The Danalog is a 25 key portable digital music synthesizer that uses multiple synthesis methods and effects to generate sounds. Sound varieties included three synthesis methods including FM, subtractive, and sample-based, with up to eight adjustable parameters, at least four effects, including reverb, chorus, and flange, with five adjustable parameters, and at least two note polyphony, and a five band equalizer. The user would be able to adjust these effects using digital encoders and potentiometers and view the settings on two LCD screens.

The finals project was unable to meet the original design requirements. The FM synthesis method was primarily …

Logic Tiles, Andrew Wheeler, Tristan Lennertz

Computer Engineering

This project was originally conceived by Professor Andrew Danowitz as he considered the restructuring of the introductory digital design course at Cal Poly. As it stands now, students apply their knowledge of boolean algebra and combinatorial logic through the programming of a Field Programmable Gate Array (FPGA) using a Hardware Descriptive Language (HDL). While this is the industry standard for designing large, complex digital circuits, and is an fundamental skill to learn, there is a lack of actual circuit building in the process that can cause a disconnect from theory to application for students who have little-to-no experience with digital …

Wireless Audio Bridge, Daniel L. Hodges

Electrical Engineering

Bluetooth, a wireless technology standard used to exchange data using radio transmissions, has made a significant impact on the audio technology industry, specifically the way people listen to music. This technology enables a wireless listening experience, eliminating the need for wires or cables between audio devices as previously required. Audio can transmit from a cellphone or laptop (an output device) to a pair of headphones or speakers (an input device) without any physical connection. Compared to alternative wireless listening solutions (i.e. FM transmitter, radio broadcast), Bluetooth offers greater reliability, audio fidelity, portability, and ease of use. To obtain this functionality, …

Smart Safeguard, Stephen J. Marrone

Electrical Engineering

Smart Safeguard is designed to provide people with an affordable device that will notify the authorities when the buyer gets in a car crash. The device will operate off the 12V car power that is present in every car and use an accelerometer to detect if an accident has occurred. If an accident is detected the device will proceed to light up and make a noise until the passenger pushes a button on the device. If the passenger doesn’t push the button within 15 seconds the device, which is wirelessly connected to the passenger’s phone, will initiate a text to …

Music Synthesizer Senior Project: Individual Report, Bryan Bellin

Electrical Engineering

No abstract provided.

Accumulator Volume Sensor Final Project Report, Chris Naughton, Kinwei Yu, Michael George

Mechanical Engineering

Accumulator Volume Sensing Team has developed two sensor designs aimed at detecting the position of the piston within a 4024 accumulator. The two designs include the use of a Renishaw LMA10 magnetic encoder and a SpectraSymbol HotPot linear potentiometer. The magnetic encoder solution drastically increases the accuracy of sensing the piston position compared to the current solutions of both a string-pot and linear variable differential transformer while costing slightly less. The linear potentiometer seeks to provide a solution that drastically decreases the cost compared to the present sensing methods. Both designs call for a modification to one half of the …

Active Contact Lens - Low Power Backscattering Sensor-To-Antenna Integration Circuitry, Caleb B. Porter

Electrical Engineering

The Active Contact Lens measures the cornea-scleral radius of the wearer’s eye, which correlates to intraocular pressure (IOP), Glaucoma’s primary indicator. IOP varies throughout the day, and is drastically different from person to person, so constantly measuring it over a period of a few days can provide individualized tracking of the disease’s development and will help doctors develop personalized treatment schedules to treat the disease more precisely.

The Active Contact Lens sensor measures strain, based on the cornea-scleral radius, and reports the results wirelessly, to allow monitoring of an individual’s IOP over time. The lens is powered similarly to a …

Design, Analysis, And Simulation Of A Jitter Reduction Circuit (Jrc) System At 1ghz, Run Bin Yu

Master's Theses

The clock signal is considered as the “heartbeat” of a digital system yet jitter which is a variation on the arrival time of the clock edge, could undermine the overall performance or even cause failures on the system. Deterministic jitter could be reduced during the designing process however random jitter during operation is somehow less-controllable and unavoidable. Being able to remove jitter on the clock would therefore play a vital role in system performance improvement.

This thesis implements a 1GHz fully feedforward jitter reduction circuit (JRC) which can be used as an on-chip IP core at clock tree terminals to …

Cal Poly Supermileage Electronic Fuel Injection, Alexander Pink

Electrical Engineering

Cal Poly Supermileage is a student-run engineering club that builds prototype gasoline vehicles optimized maximum fuel-efficiency. To power their vehicles, the Supermileage team makes use of single-cylinder, 4-stroke, electronically fuel-injected (EFI) gasoline engines. This report details the development, iterative design & test cycles, and integration of an EFI system for the Supermileage club. This project develops an EFI system that interfaces to the most common types of sensors found in the low-power Supermileage-range of engines, including throttle-position sensors, manifold absolute pressure sensors, gear-tooth hall-effect sensors, variable-reluctance position sensors, engine coolant temperature sensors, intake air temperature sensors, and exhaust oxygen sensors. …

El Capitán: Cal Poly Rose Float Digital Drive System, Gregory Raffi Baghdikian

Computer Engineering

In today’s world of smartphones, self-driving cars, and internet-connected coffee makers, it seems as if computers are contained in everything around us. These “embedded systems” have become critical components of our lives, improving everything about the things they control, from cost, to speed, to simplicity. One area that embedded systems has hardly gained a foothold is in the world of floatbuilding. Most of the floats in the Tournament of Roses Parade, including the one built jointly by Cal Poly San Luis Obispo and Cal Poly Pomona, are technologically very simple, using mostly analog components and rudimentary discrete digital logic to …

A Stroke Therapy Brace Design, Evan Kirkbride

Electrical Engineering

Victims of stroke often have difficulty with rehabilitation. With limited movement on their affected arm, patients often do not want to move much for physical therapy. In this project, we design a robotic brace that helps stroke patients move their arm more effectively in a reaching or pulling motion. By giving patients more movement in their affected arm than they would have otherwise, patients gain more from rehabilitation. The brace also adapts to the patient’s needs, providing more inclination or resistance as needed for their physical therapy. This kind of therapy engages patients rather than relying on their likely dwindled …

Analog Vlsi Circuit Design: Linear Voltage Regulator, Brett Colteaux, Kirstie Fung

Electrical Engineering

The project outlined in this report is the design, layout, and routing of a linear voltage regulator using Cadence VLSI (very-large-scale integration) software. The design specifications for this regulator are as follows: input voltage range of 5V + 1V, load current capabilities of 150mA, and output voltage range of 1.15V to 3.3V. Furthermore, the design of this circuit was broken into three main sub-circuits: an error amplifier, bandgap reference circuitry, and biasing circuitry for the bandgap. Together, these sub-circuits integrated to make the final design.

Research for different topologies for a voltage regulator was done and the Brokaw bandgap reference …

Design Of An Integrated Acceleration Acquisition Subsystem To Satisfy High-Speed And Low-Area Requirements For Cubesats, Ryan J. Rumsey

Master's Theses

Cal Poly San Luis Obispo’s PolySat team is designing the Multipurpose Orbital Spring Ejection System (MOSES) in order to record acceleration data during the launch of CubeSats as well as to provide GPS coordinates to locate the position of CubeSats once they are injected into orbit. This work focuses on the design and development of the acceleration data acquisition (DAQ) subsystem of MOSES. This subsystem is designed around the need for a high-speed sampling system of at least 200 kHz across four channels of data, plus low-area limitations in the MOSES form factor which is roughly half the size of …

Oceanographic Instrument Simulator, Amy Chen

Master's Theses

The Monterey Bay Aquarium Research Institute (MBARI) established the Free Ocean Carbon Enrichment (FOCE) experiment to study the long-term effects of decreased ocean pH levels by developing in-situ platforms [1]. Deep FOCE (dpFOCE) was the first platform, which was deployed in 950 meters of water in Monterey Bay. After the conclusion of dpFOCE, MBARI developed an open source shallow water FOCE (swFOCE) platform located at around 250 meter of water to facilitate worldwide shallow water experiments on FOCE [1][2]. A shallow water platform can be more ubiquitous than a deep-water platform as shallow water instruments are less expensive (as it …