VLSI and Circuits, Embedded and Hardware Systems Commons^™

An Investigation Into Partitioning Algorithms For Automatic Heterogeneous Compilers, Antonio M. Leija

Master's Theses

Automatic Heterogeneous Compilers allows blended hardware-software solutions to be explored without the cost of a full-fledged design team, but limited research exists on current partitioning algorithms responsible for separating hardware and software. The purpose of this thesis is to implement various partitioning algorithms onto the same automatic heterogeneous compiler platform to create an apples to apples comparison for AHC partitioning algorithms. Both estimated outcomes and actual outcomes for the solutions generated are studied and scored. The platform used to implement the algorithms is Cal Poly’s own Twill compiler, created by Doug Gallatin last year. Twill’s original partitioning algorithm is chosen …

Sram Compiler For Automated Memory Layout Supporting Multiple Transistor Process Technologies, Brandon Hilgers

Master's Theses

This research details the design of an SRAM compiler for quickly creating SRAM blocks for Cal Poly integrated circuit (IC) designs. The compiler generates memory for two process technologies (IBM 180nm cmrf7sf and ON Semiconductor 600nm SCMOS) and requires a minimum number of specifications from the user for ease of use, while still offering the option to customize the performance for speed or area of the generated SRAM cell. By automatically creating SRAM arrays, the compiler saves the user time from having to layout and test memory and allows for quick updates and changes to a design. Memory compilers with …

Current Protection For The Energy Harvesting From Exercise Machines (Ehfem) Project, Colton Crivelli

Electrical Engineering

The Energy Harvesting from Exercise Machines (EHFEM) project intends to create an exercise machine that recycles the energy expended by an athlete operating the machine by sending it to the electric grid. The work done by the user goes through a DC-DC converter and an inverter in order to prepare it for delivery to the grid. A protection circuit ensures that the inverter does not try to pull too much current from the DC-DC converter. The project implements a current protection system that ensures the system doesn’t experience an overcurrent condition.

Dual Channel Matrix Switch Audio Receiver, Austin Fox

Electrical Engineering

The Dual Channel Matrix Switch Audio Receiver controls 2 separate audio output channels. Each channel plays any of the system's 3 inputs. This controller enables a user to play two separate audio signals through two separate speaker channels. The system design allows audio input from 2 RCA sources or 1 RCA source and a phono source. The system outputs an audio signal for each output simultaneously at up to 36W on each channel for an 8Ω load. The device allows a user to control the audio input and the volume of each output channel. An Arduino Uno R3 microcontroller interfaced …

Solar Decathlon Instrumentation And Controls, Timothy Ambrose, Mateo Begue, Andrew Elliott

Mechanical Engineering

The Instrumentation and Controls team has designed a control and instrumentation system for the 2015 Cal Poly Solar Decathlon house that will monitor temperature, humidity, and energy usage throughout the house and control the phase change material duct. It will relay information to the user through a tablet application developed by the Computer Science team. The team has also designed a lighting control scheme for use with Lutron’s HomeWorks QS lighting control system.

Analysis Of Mos Current Mode Logic (Mcml) And Implementation Of Mcml Standard Cell Library For Low-Noise Digital Circuit Design, Marcus Edwin Allan Heim

Master's Theses

MOS current mode logic (MCML) offers low noise digital circuits that reduce noise that can cripple analog components in mixed-signal integrated circuits, when compared to CMOS digital circuits. An MCML standard cell library was developed for the Cadence Virtuoso Integrated Circuit (IC) design software that gives IC designers the ability to design complex, low noise digital circuits for use in mixed-signal and noise sensitive systems at a high level of abstraction, allowing them to get superior products to market faster than competitors. The MCML standard cell library developed and presented here allows for fast development of mixed signal circuits by …

Chipper: Capacitive Bed Occupancy Sensing For An Intelligent Alarm Clock, David Levi

Electrical Engineering

What if your alarm clock knew when you got out—and stayed out—of bed? Current alarm clocks happily let you go back to bed after turning them off. In this project, I build an alarm which only stops ringing when you get out bed, and starts ringing again if you lie back in bed.

This project uses capacitance to detect bed occupancy. A person on or near the bed creates a tiny, picofarads level increase in capacitance, as seen by a sensor placed under the mattress. A microprocessor interprets this signal, and also drives an audio alarm. Shielding of the sensor …

Phase Locked Loop Integrated Circuit, Scott Buchanan, Jonathan Bonello

Electrical Engineering

No abstract provided.

Sun-Tracking Solar-Powered Led Street Light, Wesley Ballar, Harrison Wong

Electrical Engineering

Street lighting is an essential utility especially in urban and industrialized areas because it provides illumination and safety for vehicles and pedestrians throughout the night. However, street lights are relatively inefficient; they consume large amounts of power from electrical grids and have predetermined operation times that are often non-optimal for the surrounding environment. The Sun-Tracking Solar-Powered LED Street Lamp is a self-sustaining device, built to replace the current lighting sources. The device features sun-tracking capabilities for maximum energy gathering and darkness recognition to establish optimal operation times. The project provides a reliable and enhanced alternative to current street lighting systems.

Wd Data Aquisition Board, Charmaine Guintu

Electrical Engineering

The Data Acquisition (DAQ) Board project is a continuation of a project that started last year. It is a project in collaboration with Western Digital. Western Digital (WD) Power LSI Systems Validation group has stress testing equipment called the Torture Stand. Inside the Torture Stand hard drives are compacted and tested until failure. However, the transient responses of voltage and current signals from the hard drives are currently obtained from oscilloscopes. The oscilloscopes are bulky and expensive, so to replace the oscilloscopes the DAQ was created. The small size and much cheaper cost of the DAQ allows Western Digital to …

Design And Fabrication Techniques Of Devices For Embedded Power Active Contact Lens, Errol Heradio Leon

Master's Theses

This thesis designed and fabricated various devices that were interfaced to an IC for an active contact lens that notifies the user of an event by detection of an external wireless signal. The contact lens consisted of an embedded antenna providing communication with a 2.4GHz system, as well as inductive charging at an operating frequency of 13.56 MHz. The lens utilized a CBC005 5µAh thin film battery by Cymbet and a manufactured graphene super capacitor as a power source. The custom integrated circuit (IC) was designed using the On Semiconductor CMOS C5 0.6 µm process to manage …

Continuous Hand-Tool Leveling Device, Shaun Villa Koide

Electrical Engineering

To produce clean and precise cuts, hand-tools (e.g. knives and saws) must maintain a consistent angle of orientation during the entire cutting process. The Continuous Hand-Tool Leveling Device mounts on the desired hand-tool and the user inputs the desired angle of the cutting plane. The device utilizes a microcontroller unit (MCU) and accelerometer to implement real-time angle measurement. When using a hand-tool, the device uses an LED that indicates that the hand-tool’s angle deviates from the user-set desired angle, which prevents any potential mistakes from occurring due to user error. The device easily mounts on many common cutting tools. Additionally, …

Low Voltage Cmos Sar Adc Design, Ryan Hunt

Electrical Engineering

This project centers on the design of a single ended 10-bit successive approximation register analog to digital converter (SAR ADC for short) that easily interfaces to a micro-controller, such as an Arduino. With micro-controller interfacing in mind, the universal data transfer technique of SPI proved an easy way to communicate between the ADC and the micro-controller. The ADC has a range of 1V (highest code value) to 0V (lowest code value) and operates from a single voltage rail value of 1.8V. Typical SPI clock speeds run on the order of 2MHz and with a 10-bit ADC this means a sampling …

Real Time Swim Instructor, Konrad Antoniuk

Electrical Engineering

Both competitive and recreational swimmers want an efficient swim stroke but often lack consistent feedback with technical insight. Competitive swimmers rely on coaches for instruction but have to stop swimming to listen. The Real Time Swim Instructor project provides live feedback to a swimmer so they can feel their stroke correction while they’re swimming. The developing swimmer feels the difference between correct and incorrect form instantaneously.

The project takes on the responsibility of measuring the moving body, accurately determining stroke improvement, functioning under water, and providing recognizable feedback. Additionally, the user can review their swim from data stored in memory. …

Bike Safe: An Automatic Turn Signal System, Betty He Chan, Ricardo Alberto Duran

Electrical Engineering

Bicycles are vehicles that do not require a license to operate and share the road with cars, motorcycles, and other fast moving vehicles. An improper lane change from a bicyclist, such as one without any warning, can lead to great injury or death (especially after sundown). Bike Safe addresses this safety concern by providing a low-cost device that mimics the warning system motorists’ use every day. The system consists of a red brake light and amber turning signal lights that mounts to the rear of the bike, as well as a white headlamp that mounts to the front handlebars. The …

Ad-Hoc Hid: Modular Wireless Human Interface Device, Joseph A. Mazzanti

Electrical Engineering

Ad-Hoc HID is a modular, reprogrammable Human Interface Device. This device is intended to function as a keyboard, gamepad, or mouse, according to the user's needs. The final project is intended to be switch agnostic, making the final product adaptable to the user’s needs.

Mos Current Mode Logic (Mcml) Analysis For Quiet Digital Circuitry And Creation Of A Standard Cell Library For Reducing The Development Time Of Mixed Signal Chips, David Marusiak

Master's Theses

Many modern digital systems use forms of CMOS logical implementation due to the straight forward design nature of CMOS logic and minimal device area since CMOS uses fewer transistors than other logic families. To achieve high-performance requirements in mixed-signal chip development and quiet, noiseless circuitry, this thesis provides an alternative toCMOSin the form of MOS Current Mode Logic (MCML). MCML dissipates constant current and does not produce noise during value changing in a circuit CMOS circuits do. CMOS logical networks switch during clock ticks and with every device switching, noise is created on the supply and ground to deal with …

High-Speed Mobile Networks For Modern Farming And Agricultural Systems, Santos Najar

Master's Theses

ABSTRACT

High-Speed Mobile Networks for Modern Farming and Agricultural Systems

J.Santos Najar-Ramirez

High-speed mobile networks are necessary for agriculture to inventory individual plant health, maximize yield and minimize the resources applied. More specifically, real-time information on individual plant status is critical to decisions regarding the management of resources reserved and expended. This necessity can be met by the availability of environmental sensors (such as humidity, temperature, and pH) whose data is kept on storage servers connected to static and mobile local area networks. These static and mobile local area networks are connected to cellular, core and satellite networks. For …

Imu Based Tracking And Stabilization System, Aaron Barton

Electrical Engineering

The objective of this project is to develop a system that can track a user selected point in space given displacement, vibration and rotation of the device. Stabilization systems are used in various forms over the years, with the military amongst the foremost adopters. More recently, with the increasing popularity of quad-copters for RC hobbyists, and small cameras capable of take high quality video during recreational sports such as skiing or mountain biking, the need has emerged for a cheaper, more accessible version of stabilization systems for use in photography. Additionally, while some devices do exist for hobbyists can take …

Poly_Sense: Modular Wireless Sensor Network, Ian Andal, James Shirley, Haleigh Vierra

Electrical Engineering

Poly_Sense provides a platform for developers to use for a wide range of Wireless Sensor Network (WSN) applications. This modular system supports different sensing applications by allowing the developer to easily change between supported sensors through the graphical user interface (GUI). The platform also allows developers to integrate new sensors by writing device drivers which follow the platform’s guidelines and utilize the application programming interface (API). This low-power and cost-effective wireless solution not only provides a basic platform for entry-level developers, but also accommodates larger-scale applications.

Monophonic Pitch Recognition, Nathan Zorndorf, Kristine Carreon

Electrical Engineering

The purpose of this project is to create a system that automatically converts monophonic music into its MIDI equivalent. Automatic pitch recognition allows for numerous commercial applications, including automatic transcription and digital storage of live performances. It is also desirable to be able to take an audio signal as an input and create a MIDI equivalent score because the MIDI information can be used to replace the original audio signal sounds with any sound the user would like. For example, if a piano composition is entered into the system, the resulting MIDI out could be used to trigger guitar samples. …

The Bicycle-Powered Smartphone Charger, Chris Arntzen

Master's Theses

This thesis entails the design and fabrication of a smartphone charger that is powered by a bicycle dynamo hub. In addition to the design and validation of the charger prototype, this thesis involves the testing and characterization of the dynamo hub power source, the design and construction of specialized test equipment, and the design and prototyping of a handlebar-mounted case for the smartphone and charging electronics. With the intention of making the device a commercial product, price, aesthetics, and marketability are of importance to the design. An appropriate description of the charger circuit is a microcontroller-based energy management system, tailored …

Smart Wall Plug Design For The Dc House Project, Edward Constant Sibal

Master's Theses

The DC House project at Cal Poly State University faces a challenge of supplying DC voltage to household appliances. Each appliance in the DC House constitutes a DC load that has a unique voltage and power rating, hence the need to develop a smart DC wall plug that will automatically adjust to the operating voltage required by any DC load. This thesis entails a proof of concept design of the smart DC wall plug which can automatically detect an appliance’s voltage rating. The design employs a dc-dc converter in conjunction with a microcontroller to sense load current to properly adjust …

Touchspice Vs. Reactive-Spice: A Human-Computer Interaction Perspective, Joshua Martin O'Hara

Master's Theses

Traditional SPICE simulation tools and applications of circuit theory lack real-time interaction and feedback. The goal of this thesis was to create an interactive physical environment to allow the manipulation and simulation of discrete electrical components in near-real-time while optimizing and streamlining the human-computer interaction (HCI) elements to make the user experience as positive and transparent as possible. This type of HCI and near-real-time simulation feedback would allow for the instant realization of how the parameters of each discrete component or hardware module affect the overall simulation and response of the circuit.

The scope of this thesis is to research, …

Reliable Software Updates For On-Orbit Cubesat Satellites, Sean Fitzsimmons

Master's Theses

CubeSat satellites have redefined the standard solution for conducting missions in space due to their unique form factor and cost. The harsh environment of space necessitates examining features that improve satellite robustness and ultimately extend lifetime, which is typical and vital for mission success. The CubeSat development team at Cal Poly, PolySat, has recently redefined its standard avionics platform to support more complex mission capabilities with this robustness in mind. A significant addition was the integration of the Linux operating system, which provides the flexibility to develop much more elaborate protection mechanisms within software, such as support for remote on-orbit …

Lyfi, Kianoosh Salami, Justin Cotton, Elush Shirazpour

Electrical Engineering

This paper will cover the steps necessary to design, build, and manage networkable smart light switches over WiFi via a mobile application. It contains a microcontroller running a real time operating system, a WiFi module, a Java server with SQLite databasing, and a mobile phone application.

LyFi is designed to turn on/off and dim household lights while only requiring the same installation procedure as a less capable dimmer switch. Once installed and connected to a network, LyFi will self-discover and configure. The server automatically propogates a database of nodes where any mobile device running an application can receive an updated …

Control System For Glucose Detector System, David Smith

Electrical Engineering

In this paper I design and test on a prove of concept level a control/timing circuit for a blood glucose detector built in a previous senior project. The specifications of the design given are to properly power the detector with a low power source. The design is completed on a transistor level basis using Cadence Virtuoso Software. The system is design from the ground up; designing, building, and testing smaller circuits first then combined into increasingly larger circuits till the completed circuit is finished. The design used to based off of the 555 Timer and uses differential pairs, CMOS designed …

Iphone Breathalyzer: Point Oh Wait!, Gurpal Bhoot

Electrical Engineering

This final year project combines hardware and software components to create an alcohol breathalyzer that is compatible with the iPhone. The final design of the circuit and the iPhone application is original and combines multiple components to create the final product. Most of those components are seen in a simplified version of a breathalyzer, while the added components take care of the interface to the iPhone.

Foce Intermodule Communications System, Roland Quiros

Electrical Engineering

Done in conjunction with Chad Kecy of the Monterey Bay Aquarium Reasearch Institute (MBARI), this project is an expansion of the Free Ocean Carbon Emission (FOCE) project. This iteration created a communications protocol between the different modules in an expandable array of PIC24-based boards.

Linear Power-Efficient Rf Amplifier With Partial Positive Feedback, Matthew E. King

Master's Theses

Over the last decade, the number of mobile wireless devices on the market has increased substantially. New “multi-carrier” modulation schemes, such as OFDM, WCDMA, and WiMAX, have been developed to accommodate the increasing number of wireless subscribers and the demand for faster data rates within the limited commercial frequency spectrum. These complex modulation schemes create signals with high peak-to-average power ratios (PAPR), exhibiting rapid changes in the signal magnitude. To accommodate these high-PAPR signals, RF power amplifiers in mobile devices must operate under backed-off gain conditions, resulting in poor power efficiency. Various efficiency-enhancement solutions have been realized for backed-off devices …