Signal Processing Commons^™

Electronic Drum Machine (E.D.M), Nyssa Marie Backes

Electrical Engineering

Many people argue that a drummer plays the most important role in a band of any genre. During live performances, the other band members rely on the drummer to keep the song moving forward at a proper steady pace. Even in recorded music, drums help listeners sing and dance along with their favorite songs. Thus, achieving success as a band, both in terms of recordings and live shows, absolutely requires a drummer. So, if a band does not have a drummer, and cannot afford the hefty cost of hiring a session drummer, a touring drummer, or both, how can they …

Algorithm For Computational Imaging On A Real-Time Hardware, Manish Bhattarai

Electrical and Computer Engineering ETDs

DRAMATIC advances in the field of computational and medical imaging over the past decades have enabled many critical applications such as night vision, medical diagnosis, quality control, and remote sensing. The increasing demand for image quality and its fidelity requires an increase in pixel count and a sophisticated post-processing mechanism to efficiently store, transmit, and analyze this massive data. There is an inherent trade-off between the generation of big data by such imaging systems and efficiency in extraction of useful information within real-time constraints, limiting the efficacy of such sensors in real-time decision-making systems. The traditional imaging system gets burdened …

Music Synthesizer Senior Project: Individual Report, Bryan Bellin

Electrical Engineering

No abstract provided.

Music Synthesizer Senior Project: Danalog, Vikrant A. Marathe

Electrical Engineering

The Danalog is a 25 key portable digital music synthesizer that uses multiple synthesis methods and effects to generate sounds. Sound varieties included three synthesis methods including FM, subtractive, and sample-based, with up to eight adjustable parameters, at least four effects, including reverb, chorus, and flange, with five adjustable parameters, and at least two note polyphony, and a five band equalizer. The user would be able to adjust these effects using digital encoders and potentiometers and view the settings on two LCD screens. The finals project was unable to meet the original design requirements. The FM synthesis method was primarily …

Danalog: Digital Music Synthesizer, Evan R. Lew

Electrical Engineering

The Danalog is a 25 key portable digital music synthesizer that uses multiple synthesis methods and effects to generate sounds. Sound varieties included three synthesis methods including FM, subtractive, and sample-based, with up to eight adjustable parameters, at least four effects, including reverb, chorus, and flange, with five adjustable parameters, and at least two note polyphony, and a five band equalizer. The user would be able to adjust these effects using digital encoders and potentiometers and view the settings on two LCD screens.

The finals project was unable to meet the original design requirements. The FM synthesis method was primarily …

An Exact Analysis For Four-Order Acousto-Optic Bragg Diffraction Which Incorporates Both Incident Light Angle And Sound Frequency Dependencies, Adeyinka Sunday Ademola

Electrical Engineering Theses

This thesis extends the prior work which produced an exact solution to the four-order acousto-optic (AO) Bragg cell with assumed fixed center frequency and with exact Bragg angle incident light. The extension predicts the model that incorporates the dependencies of both the input angle of light and the sound frequency. Specifically, a generalized 4^th order linear differential equation (DE), is developed from a simultaneous analysis of four coupled AO system of DEs. Through standard methods, the characteristic roots, which requires solving a quartic equation, is produced. Subsequently, a derived system of homogeneous solutions, which absorbs the roots obtained using …

Implementation Of Range Autofocus For Sar Radar Imaging, Nicholas J. Testin, Philip Davis

KSU Journey Honors College Capstones and Theses

The range calculation for an FMCW radar depends on accurate linear modulation. In some circumstances, linear modulation may not be available and must be corrected for. This paper describes an autofocus technique used to correct for phase error due to non-linearities in the components of a FMCW radar. Also described here is the algorithm used in calculating the phase error and application of the phase correction with triangle modulation. Known errors were calculated at certain distances and applied to correcting the phase of data taken at similar distances. The results given were generated using a SAR working outside linear ranges.

Stringless Guitar, Kue Z. Yang, Anthony Batey, Dominic Mercorelli, Nathaniel Hawk

Williams Honors College, Honors Research Projects

The aim of this project is to improve the design of a typical guitar by designing a digital stringless guitar. Due to the nonlinearities inherent in a guitar, it would be difficult to reproduce guitar tones by summing harmonic components; therefore, digital samples of guitar tones were taken in order to preserve these unique and wonderfully sounding tones. These digital samples were stored in the guitar and used to produce its tones when played. The digital guitar includes fingerboard position sensors as well as strum sensors for each string. The fingerboard position sensors detect the player’s fingers at discrete positions. …

Data Logging System For A Synthetic Aperture Radar Unit, Nicholas J. Testin, Philip Davis, Ian Dorell, Alexander Gillespie

KSU Journey Honors College Capstones and Theses

A small, existing radar unit lacked the ability to automatically store the data it was receiving, which made its use clunky and cumbersome. A system was constructed to allow an on-board microprocessor to track distance traveled, and automatically store the data output from the radar unit to a portable memory unit for later data processing. Distance traveled is determined using a specially designed mobile cart, which electronically converts the rotation of a wheel into an electrical signal while also providing stability for taking accurate radar measurements. The output data from the radar unit is stored as a properly-formatted sound file …

El Capitán: Cal Poly Rose Float Digital Drive System, Gregory Raffi Baghdikian

Computer Engineering

In today’s world of smartphones, self-driving cars, and internet-connected coffee makers, it seems as if computers are contained in everything around us. These “embedded systems” have become critical components of our lives, improving everything about the things they control, from cost, to speed, to simplicity. One area that embedded systems has hardly gained a foothold is in the world of floatbuilding. Most of the floats in the Tournament of Roses Parade, including the one built jointly by Cal Poly San Luis Obispo and Cal Poly Pomona, are technologically very simple, using mostly analog components and rudimentary discrete digital logic to …

Conversion Of Digital Circuits Labs, Caleb N. Taber

Undergraduate Honors Theses

The engineering technology department at ETSU currently lacks a modern method to teach digital circuits. The aim of this thesis is to convert our current digital circuits labs to equivalent labs suited to run on the Basys 3. The Basys has several advantages over the aging NI Elvis boards (and now just breadboards) currently in use. The first advantage is that the Basys gives students a taste of FPGA programming without being overwhelmingly; like the systems currently in place for the digital signal processing class. The Basys is also a more modern system; our current integrated circuit and breadboard system …

Chipper: Capacitive Bed Occupancy Sensing For An Intelligent Alarm Clock, David Levi

Electrical Engineering

What if your alarm clock knew when you got out—and stayed out—of bed? Current alarm clocks happily let you go back to bed after turning them off. In this project, I build an alarm which only stops ringing when you get out bed, and starts ringing again if you lie back in bed.

This project uses capacitance to detect bed occupancy. A person on or near the bed creates a tiny, picofarads level increase in capacitance, as seen by a sensor placed under the mattress. A microprocessor interprets this signal, and also drives an audio alarm. Shielding of the sensor …

Unmanned Aircraft Systems: Air-Ground Channel Characterization For Future Applications, David W. Matolak, Ruoyu Sun

Faculty Publications

Unmanned aircraft systems (UASs) are being used increasingly worldwide. These systems will operate in conditions that differ from conventional piloted aircraft, and this implies that the airground (AG) channel for UASs can differ significantly from the traditional, simple, AG channel models. After providing some background and motivation, we describe the AG channel features and our efforts in measuring and modeling the AG channel. Some example measurement and model results-for the path loss and the Ricean K-factor-are provided to illustrate some of the interesting AG channel characteristics that are still being investigated.

Dual Channel Matrix Switch Audio Receiver, Austin Fox

Electrical Engineering

The Dual Channel Matrix Switch Audio Receiver controls 2 separate audio output channels. Each channel plays any of the system's 3 inputs. This controller enables a user to play two separate audio signals through two separate speaker channels. The system design allows audio input from 2 RCA sources or 1 RCA source and a phono source. The system outputs an audio signal for each output simultaneously at up to 36W on each channel for an 8Ω load. The device allows a user to control the audio input and the volume of each output channel. An Arduino Uno R3 microcontroller interfaced …

Low-Power Analog Processing, Daniel J. White

Department of Electrical and Computer Engineering: Dissertations, Theses, and Student Research

This dissertation presents the analog harmonic transform (AHT) and a first implementation in an integrated circuit. The transform is designed for a regular and simple hardware structure. It provides coefficients relating to an input signal's spectrum. These coefficients also have a simple relationship to the signal's Fouri\'er series coefficients.

The AHT is defined in its ideal form and evaluated for two example signal classification applications. Both military vehicle and bearing fault classification tasks are presented which validate the ability of a neural network to use the AHT coefficients to correctly classify the input signals. Because any real use of the …

Low Voltage Cmos Sar Adc Design, Ryan Hunt

Electrical Engineering

This project centers on the design of a single ended 10-bit successive approximation register analog to digital converter (SAR ADC for short) that easily interfaces to a micro-controller, such as an Arduino. With micro-controller interfacing in mind, the universal data transfer technique of SPI proved an easy way to communicate between the ADC and the micro-controller. The ADC has a range of 1V (highest code value) to 0V (lowest code value) and operates from a single voltage rail value of 1.8V. Typical SPI clock speeds run on the order of 2MHz and with a 10-bit ADC this means a sampling …

Real Time Swim Instructor, Konrad Antoniuk

Electrical Engineering

Both competitive and recreational swimmers want an efficient swim stroke but often lack consistent feedback with technical insight. Competitive swimmers rely on coaches for instruction but have to stop swimming to listen. The Real Time Swim Instructor project provides live feedback to a swimmer so they can feel their stroke correction while they’re swimming. The developing swimmer feels the difference between correct and incorrect form instantaneously.

The project takes on the responsibility of measuring the moving body, accurately determining stroke improvement, functioning under water, and providing recognizable feedback. Additionally, the user can review their swim from data stored in memory. …

Continuous Hand-Tool Leveling Device, Shaun Villa Koide

Electrical Engineering

To produce clean and precise cuts, hand-tools (e.g. knives and saws) must maintain a consistent angle of orientation during the entire cutting process. The Continuous Hand-Tool Leveling Device mounts on the desired hand-tool and the user inputs the desired angle of the cutting plane. The device utilizes a microcontroller unit (MCU) and accelerometer to implement real-time angle measurement. When using a hand-tool, the device uses an LED that indicates that the hand-tool’s angle deviates from the user-set desired angle, which prevents any potential mistakes from occurring due to user error. The device easily mounts on many common cutting tools. Additionally, …

Max Operation In Statistical Static Timing Analysis On The Non-Gaussian Variation Sources For Vlsi Circuits, Abu M. Baker

UNLV Theses, Dissertations, Professional Papers, and Capstones

As CMOS technology continues to scale down, process variation introduces significant uncertainty in power and performance to VLSI circuits and significantly affects their reliability. If this uncertainty is not properly handled, it may become the bottleneck of CMOS technology improvement. As a result, deterministic analysis is no longer conservative and may result in either overestimation or underestimation of the circuit delay. As we know that Static-Timing Analysis (STA) is a deterministic way of computing the delay imposed by the circuits design and layout. It is based on a predetermined set of possible events of process variations, also called corners of …

Monophonic Pitch Recognition, Nathan Zorndorf, Kristine Carreon

Electrical Engineering

The purpose of this project is to create a system that automatically converts monophonic music into its MIDI equivalent. Automatic pitch recognition allows for numerous commercial applications, including automatic transcription and digital storage of live performances. It is also desirable to be able to take an audio signal as an input and create a MIDI equivalent score because the MIDI information can be used to replace the original audio signal sounds with any sound the user would like. For example, if a piano composition is entered into the system, the resulting MIDI out could be used to trigger guitar samples. …

Modeling And Architectural Simulations Of The Statistical Static Timing Analysis Of The Variation Sources For Vlsi Circuits, Abu M. Baker

College of Engineering: Graduate Celebration Programs

As CMOS technology scales down, process variation introduces significant uncertainty in power and performance to VLSI circuits and significantly affects their reliability. Although Static-Timing Analysis (STA) remains an excellent tool, current trends in process scaling have imposed significant difficulties to STA. As one of the promising solutions, Statistical static timing analysis (SSTA) has become the frontier research topic in recent years in combating such variation effects. This poster will be focusing on two aspects of SSTA and its applications in VLSI designs: (1) Statistical timing modeling and analysis; and (2) Architectural implementations of the atomic operations (max and add) using …

Independent Component Analysis Enhancements For Source Separation In Immersive Audio Environments, Yue Zhao

Theses and Dissertations--Electrical and Computer Engineering

In immersive audio environments with distributed microphones, Independent Component Analysis (ICA) can be applied to uncover signals from a mixture of other signals and noise, such as in a cocktail party recording. ICA algorithms have been developed for instantaneous source mixtures and convolutional source mixtures. While ICA for instantaneous mixtures works when no delays exist between the signals in each mixture, distributed microphone recordings typically result various delays of the signals over the recorded channels. The convolutive ICA algorithm should account for delays; however, it requires many parameters to be set and often has stability issues. This thesis introduces the …

Laser Cursor, Michael Liman

Electrical Engineering

A user controls a cursor on a computer screen using a laser pointer.  A camera picks up the laser pointer’s position and sends the data to the computer to move the cursor in the correct position.

Project 308: Augmented Reality Mario Kart, Joseph Abad, David Allender, Joryl Calizo, Ryan Gaspar, Gavin Lee

Computer Engineering

Mario Kart is a popular go-kart racing game developed by Nintendo. The premise of the game is simple: drive a go-kart along a racetrack and reach the finish line before the other players. What makes this game unique, however, is the inclusion of weapons, traps, and other projectiles that a player can use to gain an advantage in the race. We have taken on the challenge of not only recreating this amazing game, but using the art of Augmented Reality to fully immerse the player in the full experience. Rather than play the game on a television screen with a …

Hand-Held Flyback Driven Coaxial Dielectric Barrier Discharge: Development And Characterization, Victor J. Law, Vladimir Milosavljevic, Neil O’Connor, James F. Lalor, Steven Daniels

Articles

The development of a handheld single and triple chamber atmospheric pressure coaxial dielectric barrier discharge driven by Flyback circuitry for helium and argon discharges is described. The Flyback uses external metal-oxide-semiconductor field-effect transistor power switching technology and the transformer operates in the continuous current mode to convert a continuous dc power of 10–33 W to generate a 1.2–1.6 kV 3.5 μs pulse. An argon discharge breakdown voltage of ∼768 V is measured. With a 50 kHz, pulse repetition rate and an argon flow rate of 0.5–10 argon slm (slm denotes standard liters per minute), the electrical power density deposited in …

Asynchronous Ds-Ss Cdma Random Spreading Code Correlation Statistics In The Presence Of Timing Error, David W. Matolak

Faculty Publications

We quantify the effect of timing tracking errors upon 2nd order correlation statistics of random binary spreading codes and, in so doing, fill a gap in the literature. Using a Gaussian model for timing tracking error, new expressions for autocorrelation statistics are derived. For crosscorrelations, we show that a zero mean Gaussian timing error has no effect upon 2nd order crosscorrelation statistics.

A Multiplier-Less Architecture For High Speed Computation Of Multi-Dimensional Convolution, Ming Zhu Zhang

Electrical & Computer Engineering Theses & Dissertations

One of the most computationally intensive operations in digital image/video processing systems is multi-dimensional convolution. Every image/video processor needs the convolution module in its pre-processing stage. Fast and efficient design of the convolution module in an application specific system is a great challenge in VLSI (Very Large Scale Integration) design. Convolution operator requires a large set of multipliers and accumulators. A high precision multiplier takes enormous amount of VLSI area and it consumes more power. Hence reduction of the number of multipliers is another important challenge in VLSI design. A multiplier-less architecture for the design of a multi-dimensional convolution module …

A Vision System Model, Erik J. Fretheim

Theses and Dissertations

This dissertation provides four major contributions to the field of vision research. The first contribution is a general vision system model. The model, which blends biological as well as technological methods into a coherent approach to vision, will provide a basis for implementing vision systems. The second contribution of this dissertation is to demonstrate particular implementations of portions of the model. These implementations will include methods for using Gabor wavelets in edge detection, in preprocessing images for use as feature vectors in backpropagation neural networks, and as basis functions in a recognition/reconstruction network, as well as methods for integrating color …

Surface-To-Surface Transition Via Electromagnetic Coupling Of Coplanar Waveguides, Robert W. Jackson, David W. Matolak

Faculty Publications

A transition is investigated which couples coplanar waveguide on one substrate surface (a motherboard) to coplanar waveguide on another substrate surface (a semiconductor chip or subarray) placed above the first. No wire bonds are necessary. A full-wave analysis using coupled line theory is presented and verified experimentally. The use of this transition for coupling to millimeter-wave integrated circuits is discussed.

Circuit Analysis Of A Gas Flow Switch, Teri Marie Owens

Electrical & Computer Engineering Theses & Dissertations

The circuit analysis of a gas flow switch is presented. The objective of the analysis is to model the switching process during spark gap breakdown. This information is useful in understanding switch operation and identifying ways to improve switch performance.

A lumped circuit model is used to describe a gas flow switch during the switching process. Certain circuit element values are determined experimentally through static tests. Other component values, including a time-varying switch resistance and inductance, are estimated from current measurements. In particular, unknown constants in expressions for gap resistance and inductance are determined using an iterative parameter estimation technique. …