Signal Processing Commons^™

Experimental Validation Of Optical Wireless Communication And Power Transfer For Uav Applications, Fnu Dhruv

UNF Graduate Theses and Dissertations

Unmanned Aerial Vehicles (UAVs) have revolutionized emergency response, disaster assessment, and search-and-rescue operations. However, their operational efficacy is fundamentally constrained by limited battery endurance and the susceptibility of traditional radio-frequency communication to disruption in adverse weather. To address these limitations, this thesis proposes and experimentally validates a novel architecture integrating Free-Space Optical (FSO) communication with Simultaneous Lightweight Information and Power Transfer (SLIPT). This system utilizes a split-beam configuration to concurrently enable high-bandwidth data transmission and optical energy harvesting to replenish the UAV's battery pack. The research was conducted in three progressive phases. Initially, system feasibility was established through rigorous optical …

Dual-Interface Wifi Packet Sniffer System Using Esp32-Cam With Real-Time Pcap Generation For Iot Network Analysis, Boy Setiawan Boy, Maghfiroh Maulani, Zico Pratama Putra, Muhammad Senoyodha Brennaf

Makara Journal of Technology

This study focuses on designing and implementing a cost-effective and energy-efficient WiFi packet sniffer system using the ESP32. The ESP32-CAM module, which combines WiFi, Bluetooth, and microSD support, is used to capture IEEE 802.11 frames in real-time via promiscuous mode. Packets are stored in packet capture format, which is compatible with tools such as Wireshark and Scapy. Developed using the official ESP-IDF, it offers low-level control and high performance. Two user interfaces were implemented: a UART-based text menu and a web-based HTTPS menu hosted on the ESP32 itself. Functional and performance evaluations were conducted with a focus on capturing broadcast …

Development Of A Cost-Effective Daq For Measuring Brake Performance In Race Cars, Adrin Alias

2025 Spring Honors Capstone Projects - Archive

This project explores the feasibility of creating a cost-effective data acquisition (DAQ) system for high-speed, real-time brake performance testing of Formula SAE racecars. The research addresses the limitations of the current MoTeC DAQ system currently employed by the team, which is costly and time-consuming to set up for on-car testing. The team will use a brake dynamometer for steady-state comparisons of different brake pad compounds (senior design project), but evaluating real-world performance requires on-car testing. By systematically comparing various hardware platforms, sensors, communication protocols, and storage solutions, this project aims to balance cost-efficiency with reliability and performance. The research evaluates …

Lightlink: Visible Light Communication For Batteryless Devices With Variable Computational Load, Charles Phillips

All Theses

Visible Light Communication (VLC) devices have been experimentally proven to work as a suitable communication medium for batteryless devices. However, the effects of practical load have yet to be fully explored. To that end, we have developed LightLink, a new MAC and PHY layer protocol for VLC within batteryless devices, and have studied various ways that computational load can affect transmission accuracy in realistic scenarios. Our key findings point us towards an adaptive VLC reception system based on inferred environmental variables.

Artificial Intelligence Applications For Grid-Connected Solar Inverters, Utkirjon Ubaydullaev, Sarvinoz Mirzaeva, Hasan Mustafoev

Chemical Technology, Control and Management

The increasing global demand for renewable energy has highlighted the importance of grid-connected solar inverters in ensuring efficient and stable power conversion. However, challenges such as fluctuations in solar energy generation, grid disturbances, and power quality issues necessitate advanced control strategies. The integration of artificial intelligence (AI) into solar inverters presents a transformative solution, enhancing performance, adaptability, and reliability in real-world applications.

This review explores the role of AI techniques, including machine learning (ML), deep learning (DL), fuzzy logic, and reinforcement learning (RL), in optimizing key inverter functionalities such as maximum power point tracking (MPPT), fault detection, power quality enhancement, …

Trace Flight Computer, Zachary Stratton, Vandad Mossavand Varkaneh, Nicholas Ely

Williams Honors College, Honors Research Projects

In the world of collegiate rocketry, there are currently no commercial-off-the-shelf flight computers capable of being fitted to liquid engine rockets with thrust vectoring control. Currently, amateur rocketeers utilize unreliable Arduino-based systems or expensive drone computers. The objective of this project is to design a flight computer capable of data collection and filtering, telemetry transmission, and real-time controls of critical safety systems using readily available commercial-off-the-shelf components to allow rocketeers to complete their designs within a reasonable budget. The system will collect data from two IMUs, a barometric altimeter, and a magnetometer, then filter the collected data using custom Kalman …

Automated Solutions For Hydroponic Plant Growth, Sydney Mcclure, Adam Lachguar

Sustainability Conference

Within the past year, Project H.O.M.E. has been focusing on the design and development of a semi-automatic hydroponic system specifically for sustaining plant life in Martian-like conditions. Given the significance of extended space-based travel, where the duration of human life in space is a crucial factor, growing food becomes imperative. This project has integrated electrical engineering and computer science, with features like automated pH testing and sensor-based evaluations. Key functionalities, including timed watering and automatic adjustments, were coded to enhance plant care. Initially, the project’s comprehensive research and strategic planning resulted in detailed blueprints and computer-aided design models for the …

Design And Implementation Of An Inverted Short Baseline Acoustic Positioning System, Jakob Frabosilio

Master's Theses

This document details the design, implementation, testing, and analysis of an inverted short baseline acoustic positioning system. The system presented here is an above-water, air-based prototype for an underwater acoustic positioning system; it is designed to determine the position of remotely-operated underwater vehicles (ROVs) and autonomous underwater vehicles (AUVs) in the global frame using a method that does not drift over time.

A ground-truth positioning system is constructed using a stacked hexapod platform actuator, which mimics the motion of an AUV and provides the true position of an ultrasonic microphone array. An ultrasonic transmitter sends a pulse of sound towards …

Towards A Wearable Device For Measuring Impedance Plethysmography Of The Radial Artery, Pritom Chowdhury

Dartmouth College Master’s Theses

Recent advancements in bioimpedance technology have demonstrated significant promise in the application of cardiac health monitoring. This research explores the design and development of a forearm-based wearable bioimpedance device for non-invasive measurement of heart rate and respiratory rate at an accuracy level comparable to medical-grade monitors. It utilizes a tetrapolar electrode configuration to analyze bioimpedance changes in the radial artery due to blood flow.

An ongoing aspect of this work involves the preliminary development of an embedded framework intended to integrate signal generation, acquisition, and processing within the device to achieve compact and efficient system design, anticipated to contribute to …

A Sindy Hardware Accelerator For Efficient System Identification On Edge Devices, Michael Sean Gallagher

Master's Theses

The SINDy (Sparse Identification of Non-linear Dynamics) algorithm is a method of turning a set of data representing non-linear dynamics into a much smaller set of equations comprised of non-linear functions summed together. This provides a human readable system model the represents the dynamic system analyzed. The SINDy algorithm is important for a variety of applications, including high precision industrial and robotic applications. A Hardware Accelerator was designed to decrease the time spent doing calculations. This thesis proposes an efficient hardware accelerator approach for a broad range of applications that use SINDy and similar system identification algorithms. The accelerator is …

A Novel Processor Architecture Implementing The Stacked Error Diffusion Algorithm And Its Zynq-Based Realization, Qishi Hu

Theses and Dissertations--Electrical and Computer Engineering

Digital halftoning reproduces continuous-tone images using patterns of black and white dots, while multitoning extends this concept by incorporating inks with intermediate intensities. These techniques are extensively utilized in the printing industry to accommodate the limited range of inks available in printers. Stacked error diffusion is a high-quality multitoning algorithm that adheres to the blue-noise dithering standard. This thesis research studies the potential parallelism inherent in the algorithm and introduces the design of a novel processor architecture optimized for efficient execution. The architecture is realized on an FPGA development board featuring a Zynq SoC. Additionally, the hardware prototype can also …

Resilient, Sustainable, And Secure Systems Support For Ultra-Low-Power Computational Things, Nicole Tobias

All Dissertations

Wireless battery-free and energy-harvesting devices are expanding the reach and vision of the Internet of Things, where trillions of embedded computational things interconnect ubiquitously around us and inform many different aspects of our everyday lives. Designing these systems without batteries and interconnecting wires lowers maintenance, environmental, and economic costs while also extending device lifetime and deployment opportunities. Over the last decade, research on these ultra-low-power embedded sensors and systems has dramatically increased — enabling new and exciting prospects in many different scientific fields, from smart building and health monitoring applications to animal and activity tracking.

These systems are not without …

Electronic Note-String Detector, Gavin Garcia-Rossi, Tommy Smail

Electrical Engineering

As the virtual space has become a dominant part of everyone’s day-to-day lives, many normal face-to-face interactions and services have not yet been facilitated by adapting technology. One of these prevailing areas is music lessons. Over Zoom meetings, or other virtual platforms, it is tremendously challenging to teach students. These challenges include recognizing student mistakes audibly and visually, and being able to give confident feedback on the incorrect notes played by learning musicians. Without having to delve into improving the complex systems that would be required to improve audio, video, and connection quality of these connections, we have another solution …

Low-Power, Event-Driven System On A Chip For Charge Pulse Processing Applications, Joseph A. Schmitz

Department of Electrical and Computer Engineering: Dissertations, Theses, and Student Research

This dissertation presents an electronic architecture and methodology capable of processing charge pulses generated by a range of sensors, including radiation detectors and tactile synthetic skin. These sensors output a charge signal proportional to the input stimulus, which is processed electronically in both the analog and digital domains. The presented work implements this functionality using an event-driven methodology, which greatly reduces power consumption compared to standard implementations. This enables new application areas that require a long operating time or compact physical dimensions, which would not otherwise be possible. The architecture is designed, fabricated, and tested in the aforementioned applications to …

Accelerating Machine Learning Inference For Satellite Component Feature Extraction Using Fpgas., Andrew Ekblad

Theses and Dissertations

Running computer vision algorithms requires complex devices with lots of computing power, these types of devices are not well suited for space deployment. The harsh radiation environment and limited power budgets have hindered the ability of running advanced computer vision algorithms in space. This problem makes running an on-orbit servicing detection algorithm very difficult. This work proposes using a low powered FPGA to accelerate the computer vision algorithms that enable satellite component feature extraction. This work uses AMD/Xilinx’s Zynq SoC and DPU IP to run model inference. Experiments in this work centered around improving model post processing by creating implementations …

Improving Cellphone-Based Bio-Imaging Technique For Fluorescence Detection, Erteza T. Efaz

LSU Master's Theses

The research presented in this thesis focuses on the design, development, and evaluation of a fluorescence detection system. The system is implemented primarily as an Android application, Auto Camera, which leverages smartphone cameras to capture and analyze fluorescent images. The application provides a user-friendly interface with some configurable features like exposure time, ISO speed, and storage limit; as well as defining detection thresholds and setting acquisition intervals. This study begins with the architectural framework of the Android application, which is written in Java using Android Studio. The API compatibility is set to version 33, and users are prompted to grant …

Low Power Multi-Channel Interface For Charge Based Tactile Sensors, Samuel Hansen

Department of Electrical and Computer Engineering: Dissertations, Theses, and Student Research

Analog front end electronics are designed in 65 nm CMOS technology to process charge pulses arriving from a tactile sensor array. This is accomplished through the use of charge sensitive amplifiers and discrete time filters with tunable clock signals located in each of the analog front ends. Sensors were emulated using Gaussian pulses during simulation. The digital side of the system uses SAR (successive approximation register) ADCs for sampling of the processed sensor signals.

Adviser: Sina Balkır

Development Of The Subwave Rov And Neural-Inertial Positioning System, Jason Farmer

Theses and Dissertations

This report documents the development of the Subwave, a remotely-operated underwater vehicle (ROV), and an artificial neural network based inertial positioning system. The Subwave uses the open-source ArduSub software framework, commercial-off-the-shelf hardware components, and several custom systems. It is designed as a platform for researching autonomous underwater vehicles (AUVs). The first step for an AUV is navigating waypoints, which requires the AUV to know its global position. Since global navigation satellite systems (GNSSs) are denied underwater, the available underwater positioning systems were surveyed and determined that all the available systems were too large and expensive for the Subwave. It was …

Signal Adc Converter Simulation On Cadence Virtuoso For Audio Applications, Maxwell Kazuki Fukada

Electrical Engineering

Audio signals are representations of sounds with a mixture of multiple analog signals between the frequency of 20Hz to 20,000Hz. To record snippets of audio data onto a mobile phone or computer, the signal needs to be converted to a digital format. For this purpose, many devices utilize a converter, specifically a sigma-delta modulator with a digital filter. By using a converter, electronics can receive binary data about the audio signal accurately and quickly without losing important signal information. This project aims to simulate a fully functional audio converter with a sigma-delta modulator and decimation filter. The system will receive …

Design & Analysis Of Mixed-Mode Integrated Circuit For Pulse-Shape Discrimination, Bryan Orabutt

McKelvey School of Engineering Graduate Student Theses & Dissertations

In nuclear science experiments it is usually necessary to determine the type of radiation, its energy and direction with considerable accuracy. The detection of neutrons and discriminating them from gamma rays is particularly difficult. A popular method of doing so is to measure characteristics intrinsic to the pulse shape of each radiation type in order to perform pulse-shape discrimination (PSD).

Historically, PSD capable systems have been designed with two approaches in mind: specialized analog circuitry, or digital signal processing (DSP). In this work we propose a PSD capable circuit topology using techniques from both the analog and DSP domains. We …

Indoor Positioning Using Synchronized Ultrasonic Ofdma Signals, Julian Bartolone

Master's Theses

This paper proposes a method of short-range indoor localization using differential phase measurements of synchronized two-tone ultrasonic signals in an Orthogonal Frequency Multiple Access (OFDMA) scheme. This indoor positioning system (IPS) operates at an ultrasonic frequency of approximately 40kHz and synchronizes using an infrared signal. The OFDMA scheme allows for a receiver to process the signals from multiple transmitters continuously without the signals interfering with each other. The phases of the signals are measured using Goertzel Filters, allowing for low-complexity frequency content analysis. A MATLAB simulation using the proposed localization method is performed using four transmitter nodes in the corners …

Reference Design Of An Online Emulation And Hot-Patching Approach For Power Electronic Controller Validation, Estefano Soria Pearson

Graduate Theses and Dissertations

This thesis aims to develop a reference design of an online security system approach embedded in a power electronic controller for cybersecurity purposes. Cybersecurity in power electronics focuses on reducing vulnerabilities in the system, where most reside in the communication with the hardware devices. Although methods to secure communications lessen the probability and effects of cyber-attacks, discovering vulnerabilities is inevitable. This thesis attempts to provide a fail-safe approach to securing the system by targeting the safety of the power-electronic controller. This approach applies an additional security layer in case of a malicious or accidental controller firmware malfunction.

The online security …

Bibliometric Review Of Predictive Maintenance Using Vibration Analysis, Aashna Midha Ms., Ishita Maheshwari Ms., Kaushik Ojha Mr., Kritika Gupta Ms., Shripad V. Deshpande Mr.

Library Philosophy and Practice (e-journal)

Every day the world is depending more and more on machines in almost every aspect of life. With the increasing use of machines, there also needs to be an evolution in the maintenance of these machines. Predictive maintenance is a process used to monitor the equipment and machinery during its operation to detect any damages and/or deteriorations and enable the required maintenance plan in advance, resulting in reduced operational costs and full utilization of tools and parts. The fundamental goal of this bibliometric review paper is a comprehension of the extent and sources of the literature available for predictive maintenance …

Hard Hat Ambient Liability Observer (Halo), Hunter Hykes, Nathan Kish, Brian Thomson

Williams Honors College, Honors Research Projects

Capturing workplace incident information is a growing area of concern for most companies. To assist with this, the design team proposed the H.A.L.O. This design uses time-of-flight sensors connected to LEDs to create a proximity-based hazard warning system. It also records incident data using an accelerometer and micro-SD card. This helps workers avoid some of the most common workplace injuries, slips, trips, and falls and accidental collisions.

Students have created a design with engineering, and marketing requirements that accomplish this task. The proposed design allows for this monitoring and mitigation systems to be attached to hard hats. Team members developed …

Kettlebell Ultra, Elissa Peters, Kathryn Wegman, Daniel Basch, Mason Pastorius

Williams Honors College, Honors Research Projects

This project will consist of an attachment to an average kettlebell that will track the number of repetitions that the user has performed. The device will send this data over Bluetooth to a smart phone application so the user can track their workout accurately.

Digital, Automated Reactive Target System, Nicholas Haas, Saipranay Vellala, Trandon Ware, Thomas Martin

Williams Honors College, Honors Research Projects

In this era, technology is woven into almost every facet of our leisure activities. Although technology has innovated hobbies ranging from chess to soccer, the art of shooting has been neglected. Unnecessary insufficiency such as bullet ricochets off of mechanical steel targets, ineffective progress tracking, and general inaccessibility to outdoor training facilities are all improvable areas of this sport. The Dynamic Automated Reactive Target (D.A.R.T) System aims to fill some of these gaps and help modernize recreational marksmanship. Modeling the system after a dueling tree will optimize the use of the system and allow for different training models to challenge …

Design Of An Embedded Iris Recognition System For Use With A Multi-Factor Authentication System., Christopher David Hess

Electrical Engineering Undergraduate Honors Theses

This paper describes in detail the design, manufacturing and testing of an embedded iris scanner for use with a multifactor authentication system. The design process for this project included hardware design from part selection to board design to populating. Additionally, this process included the entirety of the software development, though the iris recognition process was largely based on other works. The functional requirements for the overall multi-factor authentication system were to have three authentication methods with a thirty second window to complete all three. The system acceptance accuracy was required to be greater than 75%. Those requirements therefore dictate that …

Investigating The Effect Of Detecting And Mitigating A Ring Oscillator-Based Hardware Trojan, Lakshmi Ramakrishnan

Electrical Engineering Theses and Dissertations

The outsourcing of the manufacturing process of integrated circuits to fabrications plants all over the world has exposed these chips to several security threats, especially at the hardware level. There have been instances of malicious circuitry, such as backdoors, being added to circuits without the knowledge of the chip designers or vendors. Such threats could be immensely powerful and dangerous against confidentiality, among other vulnerabilities.

Defense mechanisms against such attacks have been probed and defense techniques have been developed. But with the passage of time, attack techniques have improved immensely as well. From directly observing the inputs or outputs, adversaries …

Portable High-Definition Audio Spectrum Analyzer, Alex Zahn, Jamie Corr

Electrical Engineering

The Portable High-definition Audio Spectrum Analyzer (PHASA) allows the user to visualize the audio frequency spectrum of an incoming line-level stereo audio signal. Upon pressing the touch screen spectrum graph, the PHASA displays the corresponding frequency and volume levels as well as crosshairs at the touched location. The PHASA features multiple left/right channel display modes— Left channel only, right channel only, both channels simultaneously, and the average between the two channels. The PHASA features multiple resolution display modes (standard-resolution and high-resolution) and multiple dynamics display modes (standard dynamics, averaging, and peak/hold). The PHASA accepts input audio via a 1/4" TRS …

Detecting Suicide Risk From Wristworn Activity Tracker Data Using Machine Learning Approaches, Pallavi Atluri

Electrical Engineering Theses

Suicide is a prevalent cause of death worldwide and depression is a primary concern of many suicidal acts. It is possible that an individual during depression never has any suicidal thoughts at all. On the other hand, some individuals in stable condition with no apparent symptoms of depression feel urges to commit suicide (suicidal ideation). Many such individuals never let anyone know what they are feeling or planning. Suicidal ideation considered an important precursor to suicidal acts.

Detecting the suicide risk in individuals with mood disorders is a major challenge. The current clinical practice to assess suicide risk in these …