Power and Energy Commons^™

Grid-Tied Solar System, Virginia Yan

Electrical Engineering

Distribution level solar energy generation has gained importance and popularity, because it helps create a sustainable electricity system while reducing the harmful environmental impacts our current power systems have. This project proposes an alternative energy source, a laboratory-scale grid-connected photovoltaic system. A KC120-1 solar panel produces 120 Watts maximum. A grid-tied solar power inverter does DC-to-AC conversion and minimizes energy transfer losses. The inverter also has an anti-islanding feature, which senses a power outage and prevents back-feeding through isolating the circuit. The circuit breakers isolate electrical components and protect the circuit. Schweitzer Engineering Laboratories SEL-751 feeder protection relay and SEL-735 …

Efficacy Of Multi-Threshold Null Convention Logic In Low-Power Applications, Brent Bell

Graduate Theses and Dissertations

In order for an asynchronous design paradigm such as Multi-Threshold NULL Convention Logic (MTNCL) to be adopted by industry, it is important for circuit designers to be aware of its advantages and drawbacks especially with respect to power usage. The power tradeoff between MTNCL and synchronous designs depends on many different factors including design type, circuit size, process node, and pipeline granularity. Each of these design dimensions influences the active power and the leakage power comparisons. This dissertation analyzes the effects of different design dimensions on power consumption and the associated rational for these effects. Results show that while MTNCL …

Microgrid Protection Student Laboratory: Human-Machine Interface And Scada Database, Nathan P. Martinez

Electrical Engineering

The electric utility system, a ubiquitous and fundamental component of modern life, has changed more in the last 20 years than the last 100. With more homes and businesses installing distributed energy resources (DERs) such as solar panels, battery storage, and other intermittent sources, massive changes need to take place in the electric transmission and distribution systems. Engineers must develop a new skill set for a modern utility industry. This project summarizes a component for a new laboratory class aimed at power engineering students at Cal Poly which supports the laboratory through the creation of a human-machine interface (HMI) and …

The Modified-Multiphase Boost Converter: Combined Inductors And Capacitors Topology, Zachary L. Eldredge

Master's Theses

In this work, a modified boost converter design has been implemented in a multiphase configuration with a condensed topology. The modified aspect of the design has already been proven to drastically reduce input current ripple by about 40% in a single-phase implementation. By placing two modified boost converters in parallel with interleaving main switches (multiphase), the input inductors and modified capacitors of the modified topology can be reduced to just one of each, lowering the number of components, size, and cost. Additionally, multiphase DC/DC converters lower input/output voltage and current ripples while delivering more power compared to single-phase converters. By …

Increasing The Longevity Of Tungsten Filaments In A Zone Refiner, Byron D. Greenlee

Senior Theses

Zone refining is used for its ability to purify material and grow single crystals. To produce these single crystals, a suspended molten zone, generated by electron bombardment, passes along the polycrystalline stock. During a zone refining run, the filaments that produce the electron bombardment can fail. In this project, the longevity of tungsten filaments in a zone refiner was investigated. A new bombardment geometry was constructed to attempt to increase the longevity of the filaments. The new geometry had a shield machined into it to prevent line-of-sight impurities originating in the molten zone from striking the filaments. It was found …

Developing A 1-Megawatt Photovoltaic Power Plant For Liberty University, Andrew Knudsen

Senior Honors Theses

A photovoltaic power plant with a generation capacity of 1-megawatt is designed for Liberty University. Liberty University’s location and size are stated to provide context for the design. Design choices are presented, first with general information that is applicable to any photovoltaic plant design, then with significant factors that impact this design. Specific models of solar panels and inverters are selected after the necessary classifications are determined. The final design has 2,880 solar panels with a fixed angle 30⁰ above the horizon, has two central inverters, and takes up 2.57 acres. Future research is suggested for finances as well as …

Contributions To Hybrid Power Systems Incorporating Renewables For Desalination Systems, Nasser Alawhali

Theses and Dissertations--Electrical and Computer Engineering

Renewable energy is one of the most reliable resource that can be used to generate the electricity. It is expected to be the most highly used resource for electricity generation in many countries in the world in the next few decades. Renewable energy resources can be used in several purposes. It can be used for electricity generation, water desalination and mining. Using renewable resources to desalinate the water has several advantages such as reduce the emission, save money and improve the public health. The research described in the thesis focuses on the analysis of using the renewable resources such as …

Conjugated Dynamic Modeling On Vanadium Redox Flow Battery With Non-Constant Variance For Renewable Power Plant Applications, Abu Nayem Md. Asraf Siddiquee

Student Theses and Dissertations

A parametric modeling study has been carried out to assess the impact of change in operating parameters on the performance of Vanadium Redox Flow Battery (VRFB). The objective of this research is to develop a computer program to predict the dynamic behavior of VRFB combining fluid mechanics, reaction kinetics, and electric circuit. The computer program was developed using Maple 2015 and calculations were made at different operating parameters. Modeling results show that the discharging time increases from 2.2 hours to 6.7 hours when the concentration of V2+ in electrolytes increases from 1M to 3M. The operation time during the charging …

Dc-To-Dc Buck Converter, Kyle Christopher Roman

Electrical Engineering

The growth of sustainable energy requires many components to work in harmony creating one efficient and effective system. Sustainable energy generation that produces a DC current varying in voltage requires a subsystem to convert voltage to a practical and usable value. The DC to DC Buck converter converts high DC solar generated voltage to a 12V output. This Modular -Level power electronic (MLPE) device performs as a solar charge controller for small lithium ion batteries. Fluctuating voltage levels generated by Photovoltaic cells makes the solar controller a critical part of the solar system. Regulating the DC voltage allows safe and …

Hybrid Water Pump, Dylan W. Grant, Wei Chen Yeh

Electrical Engineering

This project seeks to use multiple sources to power a water pump. We will design a system which will combine inputs from solar and wind energy production to ensure the pump will have enough power to run. This will create a system powered by clean energy and will be self-sustained once completed. This will theoretically create a more sustainable source of power for the pump than only one of the sources. Because the power sources don’t require outside inputs (aside from sun and wind), the pump can be placed in a remote area. This could be very helpful in developing …

Dc House Energy Management System, Zachary L. Eldredge, Zoe M. Hay

Electrical Engineering

In this work, a previously completed proof of concept for an Energy Management System (EMS) for the DC House project has been revised and re-implemented. The implemented design changes will improve the performance and reproducibility of the system. This new design of the EMS replaces the two-separate buck and boost DC-DC converters with a single bidirectional DC-DC converter to reduce components and improve efficiency. Analysis of the bidirectional DC-DC converter shows high efficiency especially at larger load currents. The code of the previous work was updated for smoother operation as well as to accommodate an LCD capable of displaying more …

Lab-Scale Circuit Breaker Module For Power System Laboratories, Amanda Barley, Allen C. Scozzari, Joshua E. Chung

Electrical Engineering

In this project, a circuit breaker that can simulate different types of power system faults is redesigned, constructed, and tested. They will then be implemented in power systems laboratory courses at Cal Poly. The project’s goal is to improve a previous circuit breaker design to help students better visualize how faults affect power systems in the real world. Two main improvements are made to the previous circuit breaker design. The first improvement is to power the breaker with a typical wall outlet adapter instead of the DC source from the Cal Poly power systems laboratory test benches. This lets the …

A Method For Evaluating Aircraft Electric Power System Sizing And Failure Resiliency, Cory Kenneth Kross

Master's Theses

With the More Electric Aircraft paradigm, commercial commuter aircraft are increasing the size and complexity of electrical power systems by increasing the number of electrical loads. With this increase in complexity comes a need to analyze electrical power systems using new tools. The Hybrid Power System Optimizer (HyPSO) developed by Airbus SAS is a simulator designed to analyze new aircraft power systems. This thesis project will first provide a method to assess the reliability of complex aircraft electrical power systems before and after failure and reconfiguration events. Next, an add-on to HyPSO is developed to integrate the previously developed reliability …

Power Distribution:Protection Analysis, Avneet S. Samra

Electrical Engineering

The objective of this project is to build a radial distribution system that operates on a lower voltage. The system consists of a transmission line protected by a SEL-351 Relay, a three- phase transformer protected by a SEL-587 Relay, and a three-phase induction motor protected by a Cooper Form 6 Controller. The SEL-351, SEL-587, and the Cooper Form 6 Controller are microprocessor-based relays that are used to provide protection under faulted conditions. When a fault is detected in the system, the closest upstream relay sends a trip signal to its assigned local breaker. The SEL-351 provides overcurrent protection for the …

Designing A Power Distribution System For The Arce 257 Revit Structural Model, Reid Wilhelm

Electrical Engineering

The construction industry needs engineers. Mechanical, electrical, and plumbing engineers, better known as MEPs, comprise a large number of employees who design and assist in the building of commercial structures. In particular, electrical engineers design power distribution systems for these buildings, including the power, lighting, low voltage, and fire protection subsystems.

Here at Cal Poly, architectural engineers enrolled in ARCE 257 create authentic structural plans for a fictitious two-story structure. This senior project transforms these structural plans into an architectural model and creates a power distribution system for the entire building. This is done through a building information modeling (BIM) …

Integration Of Sel Relays To Provide Motor, Transmission Line, And Transformer Protection, Christopher Ewing, Bryce Keefer

Electrical Engineering

The objective of this project is to familiarize the performers with the principles of operation of the Schweitzer Engineering Laboratories (SEL) protective relays in both normal and fault conditions. The SEL-587, SEL-311L and SEL-710 microprocessor-based relays are used to provide protection for a system composed of transformers, simulated transmission lines and a 3-phase induction motor. Each of these relays provides protection by sending a trip signal to local breakers upon sensing a fault condition. The SEL-587 provides overcurrent and differential protection for a 3-phase transformer, while the SEL-311L provides differential and distance protection for a transmission line, and negative sequence. …

Rf Power Harvesting Rectenna, Jimmy Tang, Raymond Phu, Tom Geranios, Benjamin Muñoz

Electrical Engineering

Sustainability is one of today's primary engineering objectives. This principle involves system design that minimizes environmentally harmful energy emissions and resource consumption, and maximizes renewable energy practices [1]. Communication antennas transmit wireless signals that can be converted into usable energy. The Rectenna system described in this report, shown in Figure 1, was designed to accomplish this energy conversion, with -5dBm (316µW) minimum power at the rectifier input. Since typical ambient signal power is in the -70dBm (0.1nW) range, the proposed system could only convert passive, relatively high-power microwave band AC signals to DC. The Rectenna system was designed for 1.9GHz …

Solar-Powered Hot Tub, Jonathan Peterson, Anthony Zepeda

Electrical Engineering

This paper discusses the design and implementation of a solar-powered hot tub. The concept of this project was to design an independently-operated hot tub powered by a 12V rechargeable battery, charged during the day by a single 400W solar panel. For this purpose, a twenty-year-old name-brand hot tub was purchased, in used condition. The plumbing, AC electrical wiring, and mechanical pumps were all removed and replaced with new components to meet our design specifications. Additionally, a solar water-heater was designed and integrated into the system to directly apply the sun’s heat to water pumped in and out of the tub, …

Power Protection Analysis For A Ten Bus System, Sean Hanna

Electrical Engineering

Each power system built in the industry requires a protection plan. Undetected faults in a power system can contribute to hazardous conditions, overheating of power devices, low or high system voltages, unbalanced conditions, and blackouts. This senior project is the design of a protection plan for a power system using the software Electric Transient Analyzer Program (ETAP). With ten buses, five transformers, two generators, two motors, and six transmission lines, there are many possibilities for a fault to occur. The Load flow and fault analysis are studied before the system is protected. All components of the system are protected using …

Dual-Input Dc-To-Dc Converter Topologies And Control Schemes, Shaun Alan Stickel

Boise State University Theses and Dissertations

Dual-input DC-to-DC converters are power supplies that draw power from two sources simultaneously and deliver power to a single load, the ratio of power drawn from each source and be held constant with changes in the load. Applications for dual-input power supplies are computer systems, mobile systems using energy harvesting, and systems needing redundant power supplies. This writing covers the operation and control of dual-input DC-to-DC converters that implement a non-inverting buck-boost function and utilize only a single power path.

Traditionally, a dual-input power supply is created by placing two standard power paths in parallel. This adds considerable control complexity …

Wireless Power Transfer To A Small, Remote Control Boat, Mark M. Oscai, Michael D. Sinanis, Abbas Semnani, Dimitrios Peroulis

The Summer Undergraduate Research Fellowship (SURF) Symposium

Over the past few decades, researchers have explored and implemented methods of wireless power transmission to operate devices that traditionally have been powered using plug-in power supplies and batteries. It is with this objective in mind that we built a boat, which is powered wirelessly from a field of harvestable energy. This project sought to develop a wirelessly powered remote control boat to be a proof of concept for the idea of wireless power transfer. Our criteria for success is that the boat should receive sufficient power to run anywhere in a 2.5 meter squared area. Having defined the field …

Renewable Energy In Industrial Applications, Seshi Reddy Kasu

Dissertations, Theses and Capstone Projects (Full IR Collection)

Manufacturing industry accounts for about one third of total energy use worldwide. Roughly three quarters of industrial energy use is related to the production of energy-intensive commodities such as ferrous and non-ferrous metals, chemicals and petrochemicals, non-metallic mineral materials, and pulp and paper. In these sectors, energy costs constitute a large proportion of total production costs, so managers pay particular attention to driving them down. As a result, the scope to improve energy efficiency tends to be less in these most energy intensive sectors than in those sectors where energy costs form a smaller proportion of total costs, such as …

Enterprise Smart Outlet, David Faltmier, Matthew Mcgill, Luke Stencel

Electrical Engineering

The purpose of our senior project, Enterprise Smart Outlet, is to create an electrical outlet which will allow enterprise users to monitor and change their power consumption habits on a large scale. The initial goal of this project is to allow consumers to see their power consumption per outlet in real time, and then using that information conform their future habits to help them conserve electrical energy, and more importantly, money. Three requirements for our project to meet our initial goal are, the outlet will work in a standard electrical outlet and be completely compatible with current electrical standards, the …

Hybrid Electric Power System Validation Through Parameter Optimization, Hasnaa Khalifi

Doctoral Dissertations and Master's Theses

Battery models can be developed from first principles or from empirical methods. The work presented in this thesis is semi-empirical, the model was validated using test data through parameter optimization. Simulink Parameter Estimation toolbox was used to identify the battery parameters and validate the battery model with test data. Experimental data was obtained by discharging the battery of a modified 2013 Chevrolet Malibu hybrid electric vehicle. The resulting battery model provided accurate simulation results over the validation data. For the constant current discharge, the mean squared error between measured and simulated data was 0.26 volts for the terminal voltage and …

Grid-Scale Energy Storage: A Proposed Control Algorithm For Sodium Sulfur Batteries, Daniel Spaizman

Master's Theses

With carbon dioxide levels in our atmosphere reaching record highs and 2020 quickly approaching, California is expected to pave the way for the United States in terms of replacing fossil fuel generation facilities with various renewable energy power plants. It is well documented that the inherent variability and limited duty cycle of renewables has hindered their growth. Energy storage technologies represent the bridge that can help us cross the divide from where we stand to where we must stand in the next 6 years. Utility companies value services such as peak shaving, voltage support, and frequency regulation, all of which …

Piezoelectric Powered Led Street Reflector, Collin Shane Douglass

Electrical Engineering

In many areas of Washington, it rains for a majority of the year. During rainy weather it becomes difficult to see street lanes and dividers, causing hazardous road conditions. The Piezoelectric Powered LED Street Reflector solves this problem. The PPL Street Reflector modifies a street reflector with LED lights. These lights help drivers clearly see where dividers and street lines are in non-ideal weather conditions, such as rain, fog, and snow. The PPL Street Reflector capabilities include harvesting energy through the Piezoelectric Effect, creating a self-sustaining device with minimal maintenance.

Merry-Go-Round Human Powered Generator, Sarah Lorraine Ashe, Salvador Navarro

Electrical Engineering

How do you bring electricity to families who have limited resources in a developing country? The DC House project, advised by Dr. Taufik, provides a way for kids to have fun, exercise and generate power for their homes – play-park human powered generators. This project intends to create a more efficient and cost effective way for playground equipment to be implemented for power generation. The redesigned and reconstructed merry-go-round human powered generator converts mechanical energy into electrical energy to power the DC house. This was a fully functioning generator that needed a better voltage gain, as well as, a more …

Cal Poly Wind Power Research Center Power Regulator, Ricardo Rodriguez, Steven Bounchareune

Electrical Engineering

Through funding from the California Central Coast Research Partnership (C3RP) the

CPWRC, led by Dr. Patrick Lemieux, has erected a horizontal axis wind turbine (HAWT) at the

Cal Poly Escuela Ranch site EL04. With the help of Dr. John Ridgely and Dr. Art MacCarley, the team has implemented a controller that delivers the power being generated by the turbine to a resistor bank which maintains a safe working speed for the turbine. The authors objectives for this project are to (1) become familiar with the operation of the turbine, (2) develop an AC-DC converter that regulates the output of the …

Off Grid Solar Powered Street Light, Justin Fang, Billy Pham

Electrical Engineering

Street lights are fixtures found in every city and serve the important purpose of illuminating the streets and keeping the roads safe for pedestrians and drivers. Current street lights are powered by the grid, power which is paid for by the taxpayers and could have been used to power homes instead. With this project, our goal is to design and implement an electric power system that collects and stores solar energy, and delivers power to an LED smart street light. The resulting system would reduce street light energy costs by 100% since they would not draw any power from the …

Modeling And Analysis Of A Photovoltaic System With A Distributed Energy Storage System, Anthony Winston Ma

Master's Theses

As California continues to integrate more renewable energy into its electrical system, the state has experienced a corresponding rise in photovoltaic system installations. PV arrays are a unique source of power generation in that they are affected by the location of the sun, shading, and temperature changes. These characteristics make solar one of the most highly variable forms of renewable energy. In order to improve solar power’s consistency, PV systems require a supplemental source of power. The primary focus of this paper is to determine if distributed energy storage systems can be used to reduce the effect of solar intermittency. …