Power and Energy Commons^™

Dataset To Analyzing Energy Use In 2 & 3d Imaging Systems And Workflows, Michael J. Bennett

Published Works

Analyzing Energy Use in 2D & 3D Imaging Systems and Workflows Dataset

CONTENTS: Z-WaveReportingProfiles; SessionInput; DroneFlights; SessionsComputed; Types; ByType; GrossSummaryUnweighted; WeightingSummary; Raw Sampling History Data

Universal Communications Module: Converting Ieee2030.5 Xml Files To Ansi/Cta-2045, Wyatt Bilodeaux

University Honors Theses

The goal of this thesis is to discuss the method and organization of the Universal Communication module capstone project. This project was part of the Portland State University Electrical engineering degree program. While this thesis is part of the University honors curriculum. This thesis goes into detail about team structure and how a 9 person engineering capstone project was managed and organized. It looks at how we broke down the project into sections to be able to properly distribute our resources. This was one of the earliest and most important challenges that this capstone team had to tackle. This was …

Power Solutions For Large Loads: Mastering Electrical Supply For New Industrial Facilities, Chris Boyer, William Bourgeois, Skyler Bryant

Mavs Open Press Open Educational Resources - Archive

The next 25 years will see unprecedented growth in U.S. electricity demand, driven primarily by data centers for AI and industrial electrification. This surge presents unique challenges for power generation, especially for large loads requiring hundreds of megawatts to gigawatts from a single location. Conventional grid expansion is inadequate, prompting the need for innovative, flexible, and sustainable solutions. This book explores the opportunities, challenges, and hybrid generation strategies to support the evolving landscape of large-scale electric loads.

Advanced Light Dimming Power Converter, Jaden Nguyen, Edwin Lin, Alan Thai

Electrical Engineering

This senior project discusses and follows the development of the Advanced Light Dimming Power Converter meant to modernize the power electronics curriculum and improve student safety for a lab. The power converter attempts to replace the original experiment which includes a traditional TRIAC-based dimmer and focuses on demonstrating phase angle control for incandescent light bulbs. However, several drawbacks including high-voltage exposure and outdated technology warranted a revamp. The redesigned module includes a dual-experiment setup with an updated TRIAC-based dimmer circuit and a new AC-DC LED driver circuit with constant current control and PWM dimming capability. Both systems have been fabricated …

Incremental Quantities Based Permissive Overreaching Transfer Trip Scheme For Protecting Inverter-Based Renewable Resources, Osama Zangoti

Electronic Theses and Dissertations

The power generation landscape evolves, with the increase of inverter-based resources (IBRs) such as solar photovoltaics and wind turbines, providing sustainable and clean energy sources. The shift towards IBRs mitigates climate change, creating considerable challenges to traditional power system protection due to their low fault current. Conventional protection schemes are designed around the internal dynamic of synchronous generators where they can supply an elevated fault current. This thesis explores a protection scheme designed to enhance the security of IBRs. The incremental characteristics of voltage and current coupled with the Permissive Overreaching Transfer Trip scheme (POTT) provide a remarkable ability to …

Harmonic Flow Modeling And Analysis Of A Green Hybrid Ac/Dc Seaport Power System, Krishan Kaushal Ram, Taufik, Helen Yu, Siddharth Vyas

Master's Theses

This thesis aims to design and develop a model for a proposed Green Seaport power system and perform harmonic analysis. The model was developed using MATLAB Simulink and tests were performed by dividing the system into several Battery Energy Storage System (BESS) operating modes such as simultaneous charging and discharging, simultaneous charging, and simultaneous discharging. For each mode, BESS state of charge and other factors such as solar irradiance for the PV system, load levels and power factor were varied to observe the impact on system’s voltage Total Harmonic Distortion (THD) level and current Total Demand Distortion (TDD). 62 separate …

Runtime Performance Of Gamess Quantum Chemistry Application Offloaded To Gpus, Masha Sosonkina, Gabriel Mateescu, Peng Xu, Tosaporn Sattasathuchana, Buu Pham, Mark S. Gordon, Sarom S. Leang

Electrical & Computer Engineering Faculty Publications

Computational chemistry is at the forefront of solving urgent societal problems, such as polymer upcycling and carbon capture. The complexity of modeling these processes at appropriate length and time scales is mainly manifested in the number and types of chemical species involved in the reactions and may require models of several thousand atoms and large basis sets to accurately capture the chemical complexity and heterogeneity in the physical and chemical processes. The quantum chemistry package General Atomic and Molecular Electronic Structure System (GAMESS) has a wide array of methods that can efficiently and accurately treat complex chemical systems. In this …

Hybrid Wall Outlet For Ac Or Dc Power Delivery, Garrett Knoller, Kerr Allan, Greg Perini

Electrical Engineering

The goal of this project is to develop hybrid DC and AC wall outlets for an efficient, flexible power interface. A DC plug standard is also proposed to allow DC devices to be safely powered by the outlet with the correct DC voltage for each device. The primary objective is to create a power outlet compatible with the proposed DC plug as well as NEMA 5-15 AC plugs, enabling the same outlet to power both types of load as needed. The outlet is intended for buildings and systems transitioning to an isolated DC grid to encourage DC development and adoption. …

Designing The Power System Of A Robot, Nolan Hays

Honors College Theses

This thesis outlines the acquired skills and knowledge acquired through the course of four years of Murray State University’s School of Engineering. The capstone for students in the department was to team up and complete an interdisciplinary senior design project using skills from various tracks of engineering. For this thesis, there is a greater emphasis on the electrical engineering track. The objective of the project was to build an autonomous robot to complete the various tasks within the scope of the IEEE SoutheastCon 2023 Hardware Competition. The robot was controlled via a Raspberry Pi 4 Model B. There were three …

Regenerative Power System Itech Itm-3633, Yang Naing Myint

Electrical Engineering

In EE295 classes, students have been using variable resistors and a 125V DC source from the wall. Both of them have weaknesses and therefore, the regenerative power system Itech IT-M3633 is used in this project. Moreover, two of the experiments, 7 and 8, have some problems with the EE295 lab manual. There is accuracy in experiment 7 and experiment 8 has been stopped for a while now by a few professors if not all. These experiments were conducted again with ITech IT-M3633 for better accuracy.

A Review Of Piezoelectric Footwear Energy Harvesters: Principles, Methods, And Applications, Bingqi Zhao, Feng Qian, Alexander Hatfield, Lei Zuo, Tian-Bing Xu

Mechanical & Aerospace Engineering Faculty Publications

Over the last couple of decades, numerous piezoelectric footwear energy harvesters (PFEHs) have been reported in the literature. This paper reviews the principles, methods, and applications of PFEH technologies. First, the popular piezoelectric materials used and their properties for PEEHs are summarized. Then, the force interaction with the ground and dynamic energy distribution on the footprint as well as accelerations are analyzed and summarized to provide the baseline, constraints, potential, and limitations for PFEH design. Furthermore, the energy flow from human walking to the usable energy by the PFEHs and the methods to improve the energy conversion efficiency are presented. …

Data-Driven Analysis And Visualization Of Energy Consumption Patterns In Academic Buildings Via Development Of Matlab Gui Tool: A Case Study At The City College Of New York From 2018-2022, Mazid Muhit

Dissertations and Theses

This case study investigates energy consumption patterns and peak periods within various buildings in the City College of New York (CCNY), aiming to foster the development of effective energy management strategies. The research develops a simple MATLAB graphical user interface (GUI) tool, designed to simplify the future replication of similar analyses using new datasets. Ten distinct CCNY buildings were examined, using data from 2018 to 2022, which includes Administration, Baskerville, ComptonGeothals-Basement, Harris, Marshak, Shepard, Steinmann, Wingate, NAC-Boiler-Room, and NAC-North-Side. The methodology entails processing original excel files to extract relevant data, followed by a comprehensive analysis within MATLAB. This involves generating …

Developing Positive Thermal Coefficient (Ptc) Heaters For Solar Electric Cooking, Katarina Ivana Brekalo, Andrew Shepherd

Physics

Positive Thermal Coefficients, PTCs, are materials that abruptly change in resistance in response to changes in temperature. The purpose of this experiment is to explore the viability of using the switching type ceramic PTC thermistor as a replacement for current resistive heaters. These types of PTCs have a nonlinear change in resistance with increases in temperature. This device will be used as a temperature-controlling heating element intended to power an Insulated Solar Electric Cooker (ISEC). The ISEC is designed to cook meals throughout the day for impacted communities as an alternative cooking method that doesn’t require biofuel as an energy …

Installation Of Electrical System For Paso Robles Police Department, Jacob M. Studebaker, Peter D. Strykers

Construction Management

This paper outlines the process that Peter Strykers and Jacob Studebaker went through to set up the lighting and power system for the Paso Robles Police Department gun range located off highway 46. Before our installation, the gun range had zero lighting so the officers could not use it after sunset. We allowed the officers to light the gun range with outdoor LED lights, light up both the storage units on site, and have access to multiple outlets inside and out of the storage units. The power source that the electrical system runs on comes from a Kubota generator because …

Installation Of Electrical System For Paso Robles Police Department, Peter D. Strykers, Jacob M. Studebaker

Construction Management

This paper outlines the process that Peter Strykers and Jacob Studebaker went through to set up the lighting and power system for the Paso Robles Police Department gun range located off highway 46. Before our installation, the gun range had zero lighting so the officers could not use it after sunset. We allowed the officers to light the gun range with outdoor LED lights, light up both the storage units on site, and have access to multiple outlets inside and out of the storage units. The power source that the electrical system runs on comes from a Kubota generator because …

Techno-Economic Feasibility Of Electrifying Food Markets In Nigeria With Biogas Hybrid Mini-Grids, Demi Temitope Ogunwo

Cal Poly Humboldt theses and projects

This thesis explored the feasibility of electrifying a food market in an urban city in Nigeria with a hybrid biogas-powered mini-grid. Under the Energizing Economies Initiative of the Rural Electrification Agency of Nigeria, nine markets in the country currently receive constant access to electricity via hybrid mini-grid systems. As a majority of these systems are diesel-solar-battery systems, this thesis explored the use of biogas generators as a substitute for diesel generators in hybrid mini-grids for food markets. A fruit and vegetable market in Ketu, Lagos was used as a case study for the research. The research for this thesis was …

Solar Photovoltaic Iv Curve Tracer, Jonathan W. Skelly

Electrical Engineering

The Solar Photovoltaic Current-Voltage (IV) Curve Tracer, sponsored by Cal Poly Professor Dale Dolan, characterizes solar array current vs. voltage curves for any given temperature and irradiance. The curve tracer is battery powered, and functions autonomously across loading conditions from short circuit to open load on any sub-450-watt solar array. The curve tracer supports separate data logging modes for both single cells and single modules to maximize data accuracy for each. For testing full strings of solar panels, up to 10 IV curves may be stored in persistent EEPROM memory. Stored data may be recalled later for output to a …

Analysis Of Three-Phase Rectifier Via Three Different Control Methods And Switch Power Loss Comparison, Yichao Wang

All Graduate Theses, Dissertations, and Other Capstone Projects

Traditional uncontrolled or phase-controlled rectifiers have the defects of lower power factor and nontrivial higher harmonics which causes the low efficiency of power, bad power quality, and so on. However, PWM rectifiers overcome the drawbacks mentioned above. They reduce the higher harmonics yielding better sinusoidal current on the grid side, achieve unity power factor and bidirectional power flow, and have better dynamic performance. So, it is favored more by academia and widely applied in high-performance power electronics devices. In this paper, the PWM rectifier is analyzed and a comparison of the switch loss on three-phase rectifier using three different control …

An Overview Of Pulsed Power System Design And Applications, Joshua John Zaiter

Senior Honors Theses

Pulsed power is the delivery of energy to a load in very short time frames. By reducing the time component, massive instantaneous power magnitudes are achieved, scaling up to the high terawatt range in some modern applications. The study of general system design and its applications have great academic merit. By analyzing the structure and breakdown of such a system, uses in various fields have been discovered, including cancer treatment and manufacturing. Liberty hopes to gain access to this research field by replicating two existing systems (with permission) and conducting tests to aid in societal progress. Results of high voltage …

Development Of A Reference Design For A Cyber-Physical System, Nicholas Paul Blair

Graduate Theses and Dissertations

The purpose of this thesis is to develop a reference design to assist in the selection of security practices in power electronics design. A prototype will be developed from this reference design for evaluation. This evaluation will include a brief cost/benefit analysis to gauge the efficacy of implementing each layer of security throughout the power electronics design process. This thesis will also describe the obstacles and effectiveness of integrating a Trusted Platform Module (TPM) into a cyber-hardened grid-connected device. The TPM device is a secured crypto processor that assists in generating, storing, and restricting the use of cryptographic keys. The …

Distribution Line Multi-Tool, Michael Andrew Garcia, Drew Miller, Sukhdeep Singh, Ritwik Kesavath

Electrical Engineering

Power companies are always interested in the best possible monitoring equipment for their grid. The power line multi-tool developed would aid in the monitoring of the power system’s distribution network. This device assesses the current conditions of distribution power lines. The device is able to measure current, detect downed power lines, as well as recognize fire starting conditions, and have wireless communication for ease of access and installation. Overall this device greatly aids in helping utilities monitor their grid in more detail.

With the increase of dry climates yearly, several utility companies are taking measures to aid in the prevention …

Lawn Buddy, Jayson Johnston, Andrew Brown, Jacob Maljian

Electrical Engineering

Grass lawns are a common hallmark of the American home. In 2019, a survey from the National Association of Landscape Professionals found that 81% of all Americans owned a lawn [1]. Mowing is a time consuming and costly chore that is part of maintaining a grass lawn. The manual labor in mowing a lawn can exceed 40 hours per year [2]. People commonly incur weekly costs on mowing services to save time. Traditional gas powered mowers are physically demanding and use engines that need routine maintenance. They operate loudly enough that users should be wearing hearing protection and the noise …

An Integrated Resource Plan For Arizona Public Service Electric (Aps), Irene Boghdadi, Randy Chiu

Master's Projects and Capstones

Our Masters Capstone Project is an Integrated Resource Plan (IRP) for Arizona’s largest electric utility, Arizona Public Service Electric (APS).

An IRP is developed by utilities to identify the optimal combination of demand- and supply-side resources needed to reliably meet forecasted demand for energy and capacity, including a planning reserve margin, over a future period.

In addition to APS’s obligation to serve the growing load in Arizona while minimizing costs, it is required by the state to adhere to the Renewable Energy Standard (RES) policy of 15 percent retail sales from renewable energy resources by 2025.

The analysis described in …

Passive And Active Battery Balancing Methods Implemented On Second Use Lithium-Ion Batteries, Walter Bartek

Masters Theses

As the number of electric vehicles (EVs) increases, the number of used battery packs that require disposal increases; however, many of these packs still have useful capacity and can be repurposed. When using repurposed large lithium-ion battery packs, deviations between cells within a pack become problematic. These deviations result in a pack that is unbalanced, affecting performance and proving potentially hazardous when charging. Consequently, a battery management system (BMS) is needed. To provide safety, the BMS in this paper monitors and controls the operation of the battery pack. In addition, it controls the redistribution of charge between the cells within …

Multiple Input Single Output Converter With Maximum Power Point Tracking For Renewable Energy Applications, Kenneth K. Nguyen, Taufik Taufik

Master's Theses

In this thesis, a maximum power point tracking (MPPT) for multiple input single output (MISO) converter is presented such that power generated from multiple individual energy sources can be combined to deliver the maximum amount of power to a common resistive load. Typically, MISO converters will employ techniques that yield equal current sharing from each energy source. However, this may not be desirable since each source may be rated at different power ratings and/or may experience different operating conditions, preventing the system MISO converter to acquire the most available total power from the sources. Utilizing MPPT control would therefore be …

Cal Poly Ee 518 Electric Power Protection Laboratory, Richard Terre, Vincent Tham, Austin Kurth

Electrical Engineering

Facing a rapidly-changing power industry, the electrical engineering department at Cal Poly San Luis Obispo proposed Advanced Power Systems Initiatives to better prepare its students for entering the power industry. These initiatives call for the creation of a new laboratory curriculum that utilizes microprocessor-based relays to reinforce the fundamental concepts of power system protection.

The electric power protection laboratory (EPPL) senior project is the validation of lab manuals written for the planned EE-518 power system protections laboratory looking to be offered in Spring 2020 alongside the current lecture class under the same designation. This report evaluates the lab manual, verifies …

Dc To Dc Usb-C Charger, Nikki Gmerek, Kenneth Nguyen, Uriel Serna

Electrical Engineering

The DC House USB-C Charger will convert the 48V input from the DC house, found on the Cal Poly campus, to 3 USB-C outputs: 5V, 12V, and 24 volts. The converter will deliver a total of 185 Watts out across all 3 outputs, with an efficiency greater than 82% at full load. The USB-C ports will be used to connect to compatible phones, laptops or any other device for charging/powering purposes. The goal of this project is to develop the most efficient and safe converter to deliver power to multiple outputs using USB-C, for items as small as a cell …

Anonymous And Efficient Message Authentication Scheme For Smart Grid, Libing Wu, Jing Wang, Sherali Zeadally, Debiao He

Information Science Faculty Publications

Smart grid has emerged as the next-generation electricity grid with power flow optimization and high power quality. Smart grid technologies have attracted the attention of industry and academia in the last few years. However, the tradeoff between security and efficiency remains a challenge in the practical deployment of the smart grid. Most recently, Li et al. proposed a lightweight message authentication scheme with user anonymity and claimed that their scheme is provably secure. But we found that their scheme fails to achieve mutual authentication and mitigate some typical attacks (e.g., impersonation attack, denial of service attack) in the smart grid …

Usb-C Power Adapter For Dc House Project, Tyler G. Starr, Ezzeddeen Gazali

Electrical Engineering

Despite the importance of electricity and the impact it has on our daily lives, many people around the world still live without this essential utility today. According to the International Energy Agency (IEA), approximately 1.1 billion people in the world did not have access to electricity in 2017. The DC House Project at Cal Poly aims to provide electricity to people living in rural areas by directly utilizing DC energy generated from renewable or human powered sources without the need for DC-AC conversions. However, one significant issue is the lack of a standardized DC wall socket. Standards for AC wall …

Power Optimization Of Solar Powered Standalone Wireless Sensor System, Rajan Amatya

Masters Theses

Wireless sensor systems are common in applications where harsh environmental conditions or remote locations make it difficult to run wires. Having these sensor systems self-powered is essential as it is difficult for battery replacement. Using solar as an alternative source of energy can be a medium to charge the battery in such scenarios. With an increasing number of portable devices powered by battery; more and more research is focused on low-power design technique. For this thesis, a microcontroller (Texas Instruments MSP432) was used along with a digital sensor (Bosch BME280) to provide temperature, pressure and humidity information, and Wi-Fi module …