Power and Energy Commons^™

Scanning Photoelectrochemical Microscopic Study In Photoinduced Electron Transfer Of Supramolecular Sensitizers-Tio2 Thin Films Systems, Sheng-Ya Zhang, Min Yao, Ze Wang, Tian-Jiao Liu, Rong-Fang Zhan, Hui-Qin Ye, Yan-Jun Feng, Xiao-Quan Lu

Journal of Electrochemistry

Crafting charge transfer channels at titanium dioxide (TiO₂) based photoanodes remain a pressing bottleneck in solar-to-chemical conversion technology. Despite the tremendous attempts, TiO₂ as the promising photoanode material still suffers from sluggish charge transport kinetics. Herein, we propose an assembly strategy that involves the axial coordination grafting metalloporphyrin-based photosensitizer molecules (MP) onto the surface-modified TiO₂ nanorods (NRs) photoanode, forming the composite MP/TiO₂ NRs photoelectrode. As expected, the resulted unique MP_B/TiO₂ NRs photoelectrode displays significantly improved photocurrent density as compared to TiO₂ NRs alone and MP_A/TiO₂ NRs photoelectrode. Scanning …

Poster: Round Trip Time Measurement Over Microgrid Power Network, Yasin Emir Kutlu, Ruairí De Fréin, Malabika Basu, Ali Malik

Conference papers

A focus of the Power Systems and Networking communities is the design and deployment of Microgrid (MG) integration systems that ensure that quality of service targets are met for load sharing systems at different endpoints. This paper presents an integrated Microgrid testbed that allows Microgrids endpoints to share their current, voltage and power values using a Network Published Shared Variable (NPSV) approach. We present Round Trip Time (RTT) measurements for time sensitive Microgrid control traffic in the presence of varying background traffic as an example quality of service measurement. Numerical results are presented using a range of different background traffic …

Round Trip Time Measurement Over Microgrid Power Network, Yasin Emir Kutlu, Ruairí De Fréin, Malabika Basu, Ali Malik

Conference papers

A focus of the Power Systems and Networking communities is the design and deployment of Microgrid (MG) integration systems that ensure that quality of service targets are met for load sharing systems at different endpoints. This paper presents an integrated Microgrid testbed that allows Microgrids endpoints to share their current, voltage and power values using a Network Published Shared Variable (NPSV) approach. We present Round Trip Time (RTT) measurements for time sensitive Microgrid control traffic in the presence of varying background traffic as an example quality of service measurement. Numerical results are presented using a range of different background traffic …

Hybrid Photovoltaic + Battery Energy System Grid-Tied Converter Capstone Review Thesis, Archer Taylor

University Honors Theses

Hybrid power converters present an opportunity to more efficiently harness energy from renewable sources. This paper reviews an undergraduate senior capstone project with the goal of designing and verifying the benefits of a hybrid converter, combining a photovoltaic array, battery energy system and a DC-AC inverter. The author recounts their experience throughout the 6 month period, detailing the research and design process followed by the prototype testing. Additionally, they reflect on the struggles of the capstone team and how to apply the learnings in the future.

Crazyflie 2.1 Quadcopter Nonlinear System Identification, Nhat V. Nguyen, Hope Storro, John Plimpton

2023 Symposium

Quadcopters (quad) are used widely in many industries with crucial applications such as infrastructure inspection or package delivery. The Crazyflie 2.1 quad from Bitcraze provides an excellent platform for research and development. In this project, our goal is to perform system identification on the Crazyflie to propose a complete model. A gray box method is explored, which includes leveraging the parameters that are already known, to develop a set of equations. Through theory, simulations, and measurements, a complete quadcopter model is developed.

Integrated Dc Microgrid Testbed For Qos Evaluation, Yasin Emir Kutlu, Ruairí De Fréin, Malabika Basu, Ali Malik

Conference papers

This poster describes the development of an integrated Direct Current (DC) Microgrid (MG) testbed, consisting of power system and computer networking hardware, e.g. Cisco 4331 Integrated Services Routers (ISR) and 500W AC/DC power supplies, to test the Quality of Service (QoS) of MG control packets which are delivered over Layer-2 and Layer-3 networking topologies. It facilitates an examination of control packets between MG end-points, that enable real-time power load sharing, in the presence of background computer network traffic such as video streaming. The effects of difference levels of background traffic on the round trip time of control packets are demonstrated.

The Modernization Of Large Power Transformer Tanks, Babajide O. Williams

Electronic Theses and Dissertations

Due to the current demands placed on the power grid in terms of climate change, increasing urbanization, and terrorist attacks, the U.S. government in response to these demands, mandated that all the grid components be modernized in order to increase their reliability. As a critical component of the grid, Large Power Transformers (LPTs) play a key role in ensuring sustainable power generation and distribution. A literature search performed in this work and the analysis of data retrieved from the search showed that the tanks of these LPTs are critical to their durability, longevity, and reliability. Therefore, the reliability of LPTs …

Design Of Hybrid Inverters Using Wideband Gap Semiconductors For Microgrid Application, Luca Gacy

Electronic Theses and Dissertations

As the world becomes more reliant on renewable energy sources such as solar and wind power, the need for high efficiency high power inverters connected to homes is more relevant than ever. Connecting these renewable energy sources (RES) coupled with an energy storage system (ESS) to the grid through a hybrid inverter, with the highest efficiency and grid stability, is quickly becoming a necessity for the near future. This thesis explores the integration of wide band gap semiconductors for the power stage in these systems, along with the analysis of hybrid inverter topologies and structures. The goal of this thesis …

The Impact Of Retrofitted Ventilation Approaches On Long-Range Airborne Infection Risk For Lecture Room Environments: Design Stage Methodology And Application, Adam O'Donovan

Publications

There is a continued need to improve the energy (and by extension carbon) performance of the existing building stock in Europe and globally. Recent experiences with the COVID-19 pandemic have demanded even more of the built environment disciplines when it comes to air quality and ventilation rates particularly in teaching environments which are seen as necessary developmental sectors for the learning of the population. As such it is important that these spaces are safe for students and staff where, until now, infectious disease risk assessments were not typical. In addition to this, there is a risk that envelope refurbishment (which …

Paired Storage Distributed Energy System Design For A Local Community Farm, Neil Albert Collison, Lily Goldman

Electrical Engineering

This project considers the design of a renewable energy microgrid for a 19-acre community farm in San Luis Obispo, CA as the farm seeks to increase the magnitude of its electrical loads, and gain back-up electrical capability. The microgrid design will enable lower carbon emissions, reduce demand on the utility grid while saving on energy costs, and provide improved reliability and resiliency to the operator of the community farm. The eventual implementation of the design by a professional engineering entity will allow the community farm to expand its education program to include renewable energy as well as gain notoriety in …

Power Thyristor Controller For Speed Control Of Dc Motor, Alejandra Zapata, Morgan Erich Boehme, Abdullah Mohammed Awidah, Payton Robert Chalstrom

Electrical Engineering

In this work, a Power Thyristor Controller for Speed Control of DC Motor has been developed with the purpose of replacing an existing simulation experiment, aiming to effectively implement the principle of learning by doing. The primary objective of the experiment setup is to illustrate the fundamental principles and operational mechanisms underlying the firing angle and controlled bridge rectifier. The new experiment is taking advantage of the existing FCRO4100 Single Phase Firing Board that was donated to the University by ENERPRO. The pre-programmed microcontroller is connected to the thyristor bridge rectifier that’s powered by 24VAC. Additionally, a DC motor will …

Development Of Cal Poly’S Hybrid Ac/Dc House, Eduardo Andres Muñoz, Giovanni Ramirez Angel

Electrical Engineering

The Hybrid House provides an example for what sustainable housing solutions could look like. It also functions as a potential solution to the current rural electrification issues many developing countries face. The use of a DC-DC MISO converter allows for combining multiple power sources into a single DC bus. The Hybrid House integrates the DC bus by employing the use of DC-DC converters for home use. This system may potentially improve the overall system efficiency by avoiding the losses associated with AC-DC converters. The use of the DC bus further leverages the Solar Panel renewable energy solution to become a …

Design, Modeling, And Testing Of A Novel Inductor For Electric Vehicles: Iron Nitride Soft Magnetic Composites, Sydney F. Fultz-Waters, Jacob Krynock

Materials Engineering

New technology for electric vehicles (EVs) must meet the requirements of higher energy usage, lower costs, and more sustainable source materials. One promising material for EV power system components is iron nitride (IN) soft magnetic composites (SMCs) because of their competitive magnetic properties and high abundance of the source materials. As part of an ongoing program at Sandia National Laboratories, this project focused on using computer modeling to optimize the prototyping process for an iron nitride SMC toroidal inductor to reach a target inductance of 600 μH. Four inductors with different combinations of wiring (26 AWG and 20 AWG) and …

Exploring The Potential Of Pavegen’S Kinetic Energy Generating Floor For Sustainable Energy Solutions: A Proposal For Cal Poly Slo, Brandon J. Cuneo

Construction Management

This paper proposes the installation of Pavegen's kinetic energy generating floors at Cal Poly’s campus as a sustainable energy solution. Pavegen has developed a pioneering technology that converts footsteps into clean and renewable energy. The versatility of these floors is demonstrated through successful implementations in various settings, such as transportation hubs and public spaces, generating power from foot traffic. Collaborations with Schneider Electric, installation at Dupont Circle, and integration at Heathrow Airport showcase the potential for sustainable urban infrastructure. This paper outlines research conducted on Pavegen and similar solutions, including communication with company representatives and examining proposed installation locations at …

Hybrid Model To Evaluate The Frequency-Dependent Leakage Inductance Of Partially-Filled Transformers, Angshuman Sharma, Jonathan W. Kimball

Electrical and Computer Engineering Faculty Research & Creative Works

The leakage inductance of a transformer designed for a power electronic converter can drop significantly as the switching frequency is increased due to skin and proximity effects. Although the magnetic image method-Based double-2-D model can predict the low-frequency leakage inductance of a partially filled transformer with sufficient accuracy, it is inherently a frequency-independent model. While Dowell's 1-D model uses frequency-dependent relations to account for both skin and proximity effects, its accuracy is severely affected by the assumed winding geometry. in this paper, a semi-analytical hybrid model is proposed that uses superposition to combine a modified Dowell's model with the double-2-D …

Programmable And Modular Dc-Dc Converter, Joshua C. Hutchinson, Elijah M. Gordon

Electrical Engineering

This project considers the design, implementation, and testing of an open-source dc-dc converter for microgrid prototyping. Unlike conventional dc-dc converters that are proprietary and require specialist knowledge, and are usually designed for a single function, the proposed dc-dc converter will comprise of a programmable MCU and a Raspberry Pi (RPi) interface to allow less-skilled consumers to monitor and modify a power converting system. We will develop an open-source library that contains voltage control, current control, maximum power point tracking, and battery charge control profiles. Each library will be easy to implement through a GUI on the Raspberry Pi and will …

Tank Level Controller Plc Lab, Siddhi Upadhyaya, Teghvir Grewal

Electrical Engineering

The California Polytechnic State University San Luis Obispo’s Electrical Engineering Department is currently developing lab experiments for the new EE435 (Industrial Power Control and Automation) class. In order to support these efforts, fourth year Cal Poly students are expected to develop laboratory experiments that will be conducted during this new class for the semester system. The lab experiment focused on in this project is called the Tank Level Controller. This experiment will introduce EE 435 students to Schneider Electric Programmable Logic Controller (PLC) hardware and software, which is prominent in the automation industry.
This experiment will require students to develop …

Current Source Dc-Dc Converter For Undersea Fiber Optic Sensors, Richard Anthony Esplana Kwan, John Charles Rodinec, Andrew Armstrong

Electrical Engineering

Today, there are nearly 400 cable networks spanning roughly 750,000 miles to connect our world together. With thousands of miles of cable already lying on the ocean floor, with thousands more to come, many have recognized a unique opportunity in using this cable infrastructure as an attachment point for sensors to help study and monitor the ocean. Placing sensors onto a submarine cable is not a simple task; the sensors will require power that they receive from a transmission cable, from a battery, or from the submarine cable itself. Unfortunately, the existing power feed configuration for submarine cables typically only …

Battery Hardware Simulator, Kian N. Orang, Marcelo Garcia

Electrical Engineering

This project aims to develop a battery hardware simulator, which will serve as a tool for studying microgrids. The primary objective is to create a simulation system that can emulate various battery technologies that are used in microgrids, including lithium-ion and lead acid. By utilizing this battery simulator, Cal Poly students can safely test battery management systems and battery-sensitive electronics without the inherent risks associated with real batteries. Our project implemented this design with a 4-quadrant programmable power supply (ITECH) connected to an AP Systems grid tied inverter. The power supply acts as the battery which can receive or supply …

Development Of Multiple Input Single Output Dc-Dc Converter, Ryan Bailey, Miguel Carmona, Jose Velez-Lopez

Electrical Engineering

This senior project report details the testing and validation of the designed DC-DC Multiple Input Single Output converter. The MISO uses four-switch buck-boost topology to output a single 48V from multiple nominal 24V inputs. The previous iteration of the MISO was plagued with an overheating mosfet that would drastically reduce the lifespan of the boards and reduce efficiency. This newest iteration includes more ground panes to combat the issues. In addition, the 200W MISO board was redesigned to utilize an edge connector for secure installment, removal, and replacement in the actual DC House system panel. The slots also have a …

Wireless Energy Harvesting System, Matthew Palma, Audrey Toop, Andrew Fahey

Electrical Engineering

The modern world is built upon wireless transmission of data. The signals that carry this data travel through the air, an untapped source of power. Unreceived transmissions are dissipated into useless forms of energy when they should be reclaimed. Wireless electronics can theoretically be powered by harvesting energy from the electromagnetic signals in the wireless internet frequency band. The aim of this project is to develop a system to capture ambient energy, convert it into DC power, and store the power for later use. The product will consist of three subsystems: an antenna receiver, a rectifier and voltage-multiplier, and a …

Parameter Measurement Of 0.33 Hp Synchronous Machine Using Itech Digital Power Supply, Andrew Kargol

Master's Theses

The classical methodologies for synchronous machine modeling provide a solid estimation for synchronous machine behavior but are limited in terms of accuracy due to the assumptions made in the modeling process. The equivalent circuit model developed by the classical approach breaks down the entire machine into a singular impedance component. This allows the model to be generated more quickly but limits its accuracy. In the pursuit of developing a more realistic model, this thesis outlines the parameter measurement of a Hampden SM-100 synchronous machine. In determining the SM-100’s experimental parameters, this thesis executes and analyzes new experimental approaches to synchronous …

Efficiency Study Of A Hybrid Ac/Dc House, Eunice Dominique Solomon Santiago

Master's Theses

With the proliferation of residential-scale renewable energy sources and DC loads, it has become attractive to use residential DC electrical system that could offer benefits over the legacy residential AC electrical system. The Hybrid AC/DC house provides a sustainable alternative to preexisting residential electrical system by having both AC and DC buses. The DC bus facilitates the connection from DC sources to DC loads, whereas the AC bus interfaces AC sources to AC loads. The study develops the equations to calculate losses based on a model consisting of four main components: Multiple-Input Single-Output (MISO) converter, AC-DC converter, inverter, and DC-DC …

Wideband Parameter Estimation Of Overhead Transmission Lines From Terminal Measurements, Fahad J. Alqahtani

Dissertations

The accurate and efficient determination of electrical parameters of transmission lines is essential when performing computer-aided analyses of power systems, including power-flow, state estimation, short-circuit, transient stability, power quality, and electromagnetic transients.

In this dissertation, a novel technique for wideband parameter estimation of frequency-dependent single-phase, three-phase transposed, and three-phase untransposed overhead lines, is proposed. The proposed technique utilizes terminal measurements of transient voltages and currents and is based on an analytical approach to solve the frequency domain 2-port nodal model of the line for the series impedance and shunt conductance per unit length as a function of the frequency. The …

P-Doped Ru-Pt Alloy Catalyst Toward High Performance Alkaline Hydrogen Evolution Reaction, Rong-Qin Huang, Wei-Ping Liao, Meng-Xuan Yan, Shi Liu, Yuan-Ming Li, Xiong-Wu Kang

Journal of Electrochemistry

Electrocatalytic water splitting represents grand promise for hydrogen fuel in modern energy equipment, and the design and fabrication of higher performance catalysts are at the central. Herein, we report the sequential phosphorus (P)-doping into ruthenium (Ru) nanoparticles (Ru-P/C) by thermal annealing of Ru nanoparticles in phosphine (PH₃) atmosphere and deposition of extremely low concentration of platinum (Pt) to obtain P-doped Ru-Pt alloy catalyst supported on carbon nanotubes (CNTs), which is denoted as (Ru-P)#Pt/C. The data by X-ray diffraction spectroscopy and transmission electron microscopy show that the Ru nanoparticles existed in the form of hexagonal close-packed (hcp) phase with …

Deep Euteceic Solvents-Assisted Synthesis Of Novel Network Nanostructures For Accelerating Formic Acid Electrooxidation, Jun-Ming Zhang, Xiao-Jie Zhang, Yao Chen, Ying-Jian Fan, You-Jun Fan, Jian-Feng Jia

Journal of Electrochemistry

Deep eutectic solvents (DESs) have been reported as a type of solvent for the controllable synthesis of metal nanostructures. Interestingly, flower-like palladium (Pd) nanoparticles composed of staggered nanosheets and nanospheres are spontaneously transformed into three-dimensional (3D) network nanostructures in choline chloride-urea DESs using ascorbic acid as a reducing agent. Systematic studies have been carried out to explore the formation mechanism, in which DESs itself acts as a solvent and soft template for the formation of 3D flower-like network nanostructures (FNNs). The amounts of hexadecyl trimethyl ammonium bromide and sodium hydroxide also play a crucial role in the anisotropic growth and …

Fe Nanoparticles Encapsulated In N-Doped Porous Carbon For Efficient Oxygen Reduction In Alkaline Media, Chun-Yan Li, Rui Zhang, Xiao-Jie Ba, Xiao-Le Jiang, Yao-Yue Yang

Journal of Electrochemistry

Rational design and synthesis of non-precious-metal catalyst plays an important role in improving the activity and stability for oxygen reduction reaction (ORR) but remains a major challenge. In this work, we used a facile approach to synthesize iron nanoparticles encapsulated in nitrogen-doped porous carbon materials (Fe@N-C) from functionalized metal-organic frameworks (MOFs, MET-6). Embedding Fe nanoparticles into the carbon skeleton increases the graphitization degree and the proportion of graphitic N as well as promotes the formation of mesopores in the catalyst. The Fe@N-C-30 catalyst showed the excellent ORR activity in alkaline solutions (E₀ = 0.97 V vs. RHE, E_{1/2 …}

Probabilistic Assessment Of Power Systems Resilience Under Natural Disasters, Enas M. Hegazy, Abdelfattah A. Eladl, Magdi M. El-Saadawi

Mansoura Engineering Journal

Extreme weather can have a substantial influence on a power system's operational resilience since they are high-impact, low-probability (HILP) events. Therefore, Power systems must be resilient to HILP incidents in addition to being reliable against widely spread and credible threats. Despite the rarity of such events, the severity of their potential impact necessitates the development of appropriate resilience assessment tools to capture their implications and enhance the resilience of energy infrastructure systems. In this paper, a probabilistic strategy is proposed to assess and evaluate the operational resilience of power distribution networks against the impacts of HILP events depending on value-at-risk …

Learning–Assisted Constraint Filtering To Enhance Power System Optimization Performance, Fouad Hasan

LSU Doctoral Dissertations

Machine learning (ML) is a powerful tool that provides meaningful insights for operators to make fast and efficient decisions by analyzing data from power systems. ML techniques have great potential to assist in solving optimization problems within a shorter time frame and with less computational burden. AC optimal power flow (ACOPF), dynamic economic dispatch (D-ED), and security-constrained unit commitment (SCUC) are the three energy management optimization functions studied in this dissertation. ACOPF is solved every 5~15 minutes. Because of the nonconvex and complex nature of ACOPF, solving this problem for large systems is computationally expensive and time-consuming. Classification and regression …

Clean Energy At The Crossroads Of America: An Integrated Resource Plan For Northern Indiana Public Service Company, Llc (Nipsco), Saad Z. Khan, Shend Boshnjaku

Master's Projects and Capstones

This paper outlines an Integrated Resource Plan (IRP) for the Indiana electric utility company, NIPSCO, looking forward to the year 2050 and evaluating different pathways to net zero emissions from the power generation sector. It is a plan for the future, identifying the most cost-effective and reliable mix of resources to meet the energy needs of NIPSCO's customers and reaching decarbonization goals by mid-century.