Power and Energy Commons^™

Poster: Optimising Electric Vehicle Charging Infrastructure In Dublin Using Geecharge, Alexander Mutiso Mutua, Ruairí De Fréin, Ali Malik, Kibanza Eliel, Sahbane Marco, Pantel Maxime

Conference papers

Range anxiety is a significant challenge affecting electric vehicles use as drivers fear running out of charge without finding a charging point on time. We develop methods to optimise the distribution of charging points. EV portacharge and GEECharge solutions distribute charging points in a city by considering the population density and Points Of Interest (POI) or road traffic. This paper focuses on (1) developing and evaluating methods to distribute Charging Points (CPs) in Dublin city; (2) optimising CP allocation; (3) visualising paths in the graph network to show the most used roads and points of interest; (4) describing a way …

Employment Of Intelligent Predictive Maintenance On Thermal Power Plant Component Parts Taking Condenser Vacuum As A Case Study, Titus Ajewole

Tanzania Journal of Engineering and Technology (TJET)

This work proposes deployment of machine learning in the maintenance of individual constituent parts of steam power plant assemblages. With the condenser vacuum of a steam turbine (in a six-turbine plant assemblage) taken as a case study, information on the past operating parameters of the selected plant component was used to forecast its future working condition. Based on Exponential Gaussian Process of Regression, a model was developed, trained using the diachronic operational data, and employed in determining the future. A quantitative evaluation was employed to provide the distribution of the test values of the data about the lines of regression, …

Frequency Stability Constrained Grid Operation With High Penetration Of Renewables, Ningchao Gao

Electronic Theses and Dissertations

Achieving carbon neutrality necessitates a significant integration of renewable energy into power systems. However, the swift implementation of fluctuating renewable energy (VRE) sources such as solar photovoltaics (PV) exacerbates real time power imbalances due to the randomness and uncertainty associated with VRE power generation. Further, the declining reliance on conventional synchronous generators (SGs) for system inertia presents considerable challenges in maintaining frequency stability, especially following disturbances.

Two possible solutions are proposed to address the first issue. Firstly, a speedy real time generation dispatch can be scheduled to allocate generation resources within short time intervals to effectively respond to changes in …

Models Of Physical-Technical Effects In The Processes Of Changing Three-Phase Asymmetrical Currents Into A Signal In The Appearance Of Secondary Voltage, Timur Urunbayevich Kurbaniyazov

Chemical Technology, Control and Management

This article presents research models, physical processes and mathematical expressions of the processes, quantities and parameters in the elements and structures of three-phase electromagnetic current transformers used in measurement and control systems of asymmetrical three-phase reactive power of power supply systems.

Research Progress And Performance Improvement Strategies Of Hard Carbon Anode Materials For Sodium-Ion Batteries, Xiu-Ping Yin, Yu-Feng Zhao, Jiu-Jun Zhang

Journal of Electrochemistry

This paper systematically summarizes the research progress of hard carbon anode materials in sodium ion batteries(SIBs) and the development of the corresponding sodium storage mechanism in recent years, and reviews the performance improvement strategies of hard carbon materials from the aspects of structural design and electrolyte regulation. The effects of the selection of precursors, carbonization temperature, pretreatment, pore formers, heteroatom doping, material compounding, electrolyte regulation and pre-sodiumization on the sodium storage performance of hard carbon anode materials are briefly described. This paper provides new insights into the design, synthesis and electrolyte
matching of high-performance and low-cost hard carbon materials, and …

Surface Modifications Of Lini0.96Co0.02Mn0.02O2 With Tungsten Oxide And Phosphotungstic Acid, Gang Zhao, Zheng-Liang Gong, Yi-Xiao Li, Yong Yang

Journal of Electrochemistry

With the rapid development of electric vehicles, enormous demands are made for higher energy density, better cycling performance and lower cost of lithium-ion batteries (LIBs). As an important high capacity cathode material for LIBs, the high nickel layered oxide material LiNi_0.8Co_0.1Mn_0.1O₂(NCM811) can reach an energy density of 760 Wh·kg^-1. The ultra-high nickel ternary positive electrode material (LiNi_1-x-yCo_xMn_yO₂, x ≥ 0.90) has a specific capacity of more than 210 mAh·g^-1, and can realize higher energy density. Besides, an ultra-high nickel material …

Preparation And Electrocatalytic Performance Of Feni-Cop/Nc Bifunctional Catalyst, Si-Miao Liu, Jing-Jiao Zhou, Shi-Jun Ji, Zhong-Sheng Wen

Journal of Electrochemistry

Rechargeable zinc-air batteries have gradually attracted much attention worldwide due to their high capacity, high energy density and low price. Oxygen reduction reaction (ORR) and oxygen evolution reaction (OER) correspond to the charging and discharging processes in rechargeable zinc-air battery, respectively. At present, commercial Pt/C and IrO₂ catalysts hinder the large-scale application of zinc-air batteries due to low reserves, high prices and poor stability. Therefore, exploring high performance, low cost and high stability with dual functional catalysts is important for the development of rechargeable zinc-Air batteries. The metal-organic frameworks (MOFs) have high specific surface area, structural stability, good catalytic …

Experimental Evaluation Of Airflow Guiding Components For Wind-Driven Single-Sided Natural Ventilation: A Comparative Study In A Test Chamber, Nima Najafi Ziarani, Malcolm J. Cook, Paul D. O’Sullivan

Publications

Single-sided ventilation is a frequently employed ventilation strategy in contemporary structures, yet its effectiveness is often mediocre, underscoring the need for solutions to enhance its performance. To evaluate the effect of louvres and guide vanes on the effective ventilation rate, 21 different louvre configurations and four guide vane designs were compared with a plain opening for single-sided ventilation in a full-scale experimental test chamber under three different magnitudes of local wind velocity. Ventilation rates were measured using the tracer gas decay method with 12 NDIR CO2 sensors. The findings, obtained under specific test conditions, indicate that deeper openings result in …

Optics Studies For Multipass Energy Recovery At Cebaf: Er@Cebaf, Isurumali Neththikumara

Physics Theses & Dissertations

Energy recovery linacs (ERLs), focus on recycling the kinetic energy of electron beam for the purpose of accelerating a newly injected beam within the same accelerating structure. The rising developments in the super conducting radio frequency technology, ERL technology has achieved several noteworthy milestones over the past few decades. In year 2003, Jefferson Lab has successfully demonstrated a single pass energy recovery at the CEBAF accelerator. Furthermore, they conducted successful experiments with IR-FEL demo and upgrades, as well as the UV FEL driver. This multi-pass, multi-GeV range energy recovery demonstration proposed to be carried out at CEBAF accelerator at Jefferson …

Designing A Model Of Solar Photovoltaic Water Pumping System For Off-Grid Localities In Tanzania, Imani Mruma

Tanzania Journal of Engineering and Technology (TJET)

Modeling of photovoltaic (PV) water pumping system for rural water localities is vital especially in these modern days, in Tanzania. This is due to the rise of high number of solar-powered rural water projects constructed lacking appropriate design. The fate result into poor and substandard projects delivering below expectations. Kikombo Solar Water Project situated in Dodoma; Tanzania is one among poorly designed solar project chosen as a case study to validate proposed model. The main problem of Kikombo project is unsatisfactory amount of water from domestic points to satisfy population demand. This matter has been raised by pumping-station attendants and …

Renewable Energy Potential Assessment For Improving Electric Power Availability In Urban Area: A Case Of Msigani Ward In Ubungo Municipal, Tanzania, Respicius Kiiza

Tanzania Journal of Engineering and Technology (TJET)

The demand for electricity in urban areas of the developing countries like Tanzania is increasing rapidly due to factors such as increasing population, expansion of economic activities and industrialization. Msigani ward is one of the fourteen (14) administrative urban wards in Ubungo Municipal, Dar es Salaam, located at latitude 6.8031 oS and longitude 39.1188 oE. Recently, there has been observed increase in power demand in this ward. This in turn has caused a supply deficit that sometimes led to large number of interruptions caused by frequent power outage and load shedding. The total capacity of the national grid is limited …

Mppt Dc-Dc Buck-Boost Converter For Off Grid Hybrid Solar-Wind Battery System In Ikuza Island, Tanzania, Aviti Thadei Mushi

Tanzania Journal of Engineering and Technology (TJET)

Ikuza Island in Kagera-Tanzania faces lack of electricity due to cost challenges of extending the grid by marine cables and other transmission facilities. These makes such endeavour not appealing to the supply authority due to those higher charges. Therefore, this paper undertakes to design hybrid renewable energy sources for the island by specifically focusing on the buck-boost converter for the energy conversion from these renewable resources. The design of the bidirectional buck-boost converter for maximum power point tracking in off-grid hybrid renewable energy systems is multifaceted due to the inhomogeneity nature of the renewable energy sources. The bidirectional buck-boost converter, …

Aquaculture In Hydropower Reservoirs, Racheal Macharia

Tanzania Journal of Engineering and Technology (TJET)

There is an undoubtedly existing relationship between water, energy, and food and their interaction with the natural environment and mankind. Climate change is the talk of the day in global development discussions as it intensifies water shortages, energy, poverty, food shortages, and environmental degradation. Currently, most of the hydropower dams constructed in Africa are majorly built to store water for agricultural purposes, control flooding, and generate electricity. Notable projects include the seven forks hydropower stations located on the Tana River in Kenya; Aswan high dam in Egypt; Grand Renaissance dam in Ethiopia; Kariba dam in Zimbabwe and Akosombo in Ghana. …

Hydrophobicity Optimization Of Cathode Catalyst Layer For Proton Exchange Membrane Fuel Cell, Hao-Jie Chen, Mei-Hua Tang, Sheng-Li Chen

Journal of Electrochemistry

Hydrophobicity of the cathode catalyst layers (CCLs) crucially determines the performance of proton exchange membrane fuel cells (PEMFCs) by affecting the transports of oxygen and liquid water. In this regard, polytetrafluoroethylene (PTFE) is usually used as a hydrophobic additive to facilitate the oxygen and water transports in CCLs. So far, there remains lacking systematic effort to optimize the addition methods of PTFE in CCLs and the mechanisms behind. In this work, the effects of the approaches for PTFE addition and the distribution of PTFE on the mass transport of oxygen and the proton conduction in CCLs were studied by using …

Asymmetric Electrode-Electrolyte Interfaces For High-Performance Rechargeable Lithium-Sulfur Batteries, Jia Chou, Ya-Hui Wang, Wen-Peng Wang, Sen Xin, Yu-Guo Guo

Journal of Electrochemistry

With a high cell-level specific energy and a low cost, lithium-sulfur (Li-S) battery has been intensively studied as one of the most promising candidates for competing the next-generation energy storage campaign. Currently, the practical use of Li-S battery is hindered by the rapidly declined storage performance during battery operation, as caused by irreversible loss of electroactive sulfide species at the cathode, dendrite formation at the anode and parasitic reactions at the electrode-electrolyte interface due to unfavorable cathode-anode crosstalk. In this perspective, we propose to stabilize the Li-S electrochemistry, and improve the storage performance of battery by designing asymmetric electrode-electrolyte interfaces …

Effect Of Amine Additives On Thermal Runaway Inhibition Of Sic||Ncm811 Batteries, Bo-Wen Hou, Long He, Xu-Ning Feng, Wei-Feng Zhang, Li Wang, Xiang-Ming He

Journal of Electrochemistry

The high energy density of NCM batteries with high nickel content is a key advantage in replacing fossil fuels and promoting clean energy development, at the same time, is also a fundamental cause of serious safety hazards in batteries. Primary and secondary amines can lead to ring-opening polymerization of common ethylene carbonate electrolytes, resulting in an isolation layer between the cathode and the anode, and improving the thermal safety of the battery. In this work, the safety of batteries is considered both at the material level and at the cell level, based on the chemical reactions between amines and the …

Effects Of Traps On Photo-Induced Interfacial Charge Transfer Of Ag-Tio2: Photoelectrochemical, Electrochemical And Spectroscopic Characterizations, Zhi-Hao Liang, Jia-Zheng Wang, Dan Wang, Jian-Zhang Zhou, De-Yin Wu

Journal of Electrochemistry

In the field of metal-semiconductor composites based plasmon-mediated chemical reactions, a clear and in-depth understanding of charge transfer and recombination mechanisms is crucial for improving plasmonic photocatalytic efficiency. However, the plasmonic photocatalytic reactions at the solid-liquid interface of the electrochemical systems involve complex processes with multiple elementary steps, multiple time scales, and multiple controlling factors. Herein, the combination of photoelectrochemical and electrochemical as well as spectroscopic characterizations has been successfully used to study the effects of traps on the photo-induced interfacial charge transfer of silver-titanium dioxide (Ag-TiO₂). The results show that the increase of surface hydroxyl groups may …

Synthesis And Evaluation Of Organic Additives For Copper Electroplating Of Interconnects, Yue-Hui Zhai, Yi-Xiao Peng, Yan Hong, Yuan-Ming Chen, Guo-Yun Zhou, Wei He, Peng-Ju Wang, Xian-Ming Chen, Chong Wang

Journal of Electrochemistry

Copper interconnects are essential to the functionality, performance, power efficiency, reliability, and fabrication yield of electronic devices. They are widely found in chips, packaging substrates and printed circuit boards, and are often produced by copper electroplating in an acidic aqueous solution. Organic additives play a decisive role in regulating copper deposition to fill microgrooves, and micro-vias to form fine lines and interlayer interconnects. Generally, an additive package consists of three components (brightener, suppressor, and leveler), which have a synergistic effect of super-filling on electroplating copper when the concentration ratio is appropriate. Many works of literature have discussed the mechanism of …

Comparing Current Consistency And Electrical Resistance Of Wearable Photovoltaic Cells Pre- And Post-Laundering And Pre- And Post-Corrosion Resistance Testing Conditions., Amit Talukder

Theses and Dissertations

Photovoltaic(PV) technology is promising due to its natural availability among energy harvesting technologies. There is a growing need for sustainable power sources that can function without being connected to a power source or needing regular battery replacements. Wearable PV cells are gaining popularity in different applications. However, most companies produce wearable PVs for terrestrial applications. Research on wearable PV applications for the marine environment remains limited because these cells suffer from several issues. This research compares commercially sourced wearable PV cells' maximum current consistency and electrical resistance for two testing conditions. The researcher followed standardized methods for these two laundering …

A Method For Economic Expansion Planning Of Transmission Networks Using Heuristic Rules And Non-Linear Optimization Model, Maged Gamal Lotfy, Mahmoud Ali Farrag, Mohamed Shibl Albags, Ahmed Hamdy Khalil

Mansoura Engineering Journal

This paper presents a method for economic planning of transmission networks in an iterative manner. The method is capable of solving large scale networks where the most "worst" new lines are deleted iteratively using heuristic rules. In each iteration, a relatively small size non-linear mathematical Programming model is built to enhance the deletion process. The non-linear model is based on full AC load flow where only the reactive power injected from different available reactive power sources are controlled plus the reference bus voltage magnitude. The deletion process is stopped when the deleting of any line from the rest set of …

Consensus-Based Active And Reactive Power Control And Management Of Microgrids, Shruti Singh

Electronic Theses and Dissertations

Microgrids incorporating distributed generation and renewable energy sources offer potential solutions to the energy crisis while modernizing traditional grids. Despite cost-effectiveness in some technologies, financial support remains crucial for expensive ones like PV, fuel cells, and storage technologies. Microgrids bring economic benefits, efficiency, reduced emissions, and improved power quality. Their success hinges on cost reductions in renewables, storage, reliability, and energy management systems, enabling operation both with and without the utility grid.

Economic Dispatch optimizes system costs, considering all constraints. Various methods tackle this problem, including quadratic convex functions, Lagrangian relaxation, and quadratic programming. For microgrids with distributed generators, seamless …

Digital Twins And Artificial Intelligence For Applications In Electric Power Distribution Systems, Deborah George

All Theses

As modern electric power distribution systems (MEPDS) continue to grow in complexity, largely due to the ever-increasing penetration of Distributed Energy Resources (DERs), particularly solar photovoltaics (PVs) at the distribution level, there is a need to facilitate advanced operational and management tasks in the system driven by this complexity, especially in systems with high renewable penetration dependent on complex weather phenomena.

Digital twins (DTs), or virtual replicas of the system and its assets, enhanced with AI paradigms can add enormous value to tasks performed by regulators, distribution system operators and energy market analysts, thereby providing cognition to the system. DTs …

Recent Progress Of Bifunctional Electrocatalysts For Oxygen Electrodes In Unitized Regenerative Fuel Cells, Tian-Long Zheng, Ming-Yu Ou, Song Xu, Xin-Biao Mao, Shi-Yi Wang, Qing-Gang He

Journal of Electrochemistry

Unitized regenerative fuel cells (URFCs), which oxidize hydrogen to water to generate electrical power under thefuel cells (FCs) mode and electrolyze water to hydrogen under the water electrolysis (WE) mode for recycling, areknown as clean and sustainable energy conversion devices. In contrast to the hydrogen oxidation reaction (HOR) andhydrogen evolution reaction (HER) on the hydrogen electrode side, the sluggish kinetics of oxygen reduction reaction(ORR) and oxygen evolution reaction (OER) on the oxygen electrode side requires highly efficient bifunctional oxygencatalysts. Conventional precious metal oxygen catalysts combine Pt and IrO₂ with excellent ORR and OER activities toachieve bifunctional electrocatalysis performance, but …

Band Alignments Of Metal/Oxides-Water Interfaces Using Ab Initio Molecular Dynamics, Yong-Bin Zhuang, Jun Cheng

Journal of Electrochemistry

Band alignments of electrode-water interfaces are of crucial importance for understanding electrochemical interfaces. In the scenario of electrocatalysis, applied potentials are equivalent to the Fermi levels of metals in the electrochemical cells; in the scenario of photo(electro)catalysis, semiconducting oxides under illumination have chemical reactivities toward redox reactions if the redox potentials of the reactions straddle the conduction band minimums (CBMs) or valence band maximums (VBMs) of the oxides. Computational band alignments allow us to obtain the Fermi level of metals, as well as the CBM and VBM of semiconducting oxides with respect to reference electrodes. In this tutorial, we describe …

Designing Intelligent Energy Efficient Scheduling Algorithm To Support Massive Iot Communication In Lora Networks, Jui Mhatre

Master of Science in Computer Science Theses

We are about to enter a new world with sixth sense ability – “Network as a sensor -6G”. The driving force behind digital sensing abilities is IoT. Due to their capacity to work in high frequency, 6G devices have voracious energy demand. Hence there is a growing need to work on green solutions to support the underlying 6G network by making it more energy efficient. Low cost, low energy, and long-range communication capability make LoRa the most adopted and promising network for IoT devices. Since LoRaWAN uses ALOHA for multi-access of channels, collision management is an important task. Moreover, in …

Nasa Weather Data Based Neural Network Grid Connected Pv System Maximum Power Point Tracking, Oluwatobiloba Mausi Johnson

Theses and Dissertations

Research and development for alternative energy sources that are cleaner, renewable, and have little to no environmental impact have been pushed by the ongoing rise in energy demand, the possibility of a decline in the use of conventional petroleum fuels, and concerns about environmental degradation. Electricity from photovoltaic (PV) systems is significantly better regarded among these alternative sources as a renewable energy source such as wind power, bioenergy, tidal energy, and hydroelectric with a wide application range because it is clean, accessible, and abundant with little to no environmental effect. However, solar energy usage is significantly impacted by the landscape, …

Field Studies Of Perc And Al-Bsf Pv Module Performance Loss Using Power And I-V Timeseries, Alan J. Curran, Xuanji Yu, Jiqi Liu, Laura S. Bruckman, Roger H. French

Faculty Scholarship

We have studied the degradation of both full-sized modules and minimodules with PERC and Al-BSF cell variations in fields while considering packaging strategies. We demonstrate the implementations of data-driven tools to analyze large numbers of modules and volumes of timeseries data to obtain the performance loss and degradation pathways. This data analysis pipeline enables quantitative comparison and ranking of module variations, as well as mapping and deeper understanding of degradation mechanisms. The best performing module is a half-cell PERC, which shows a performance loss rate (PLR) of −0.27 ± 0.12% per annum (%/a) after initial losses have stabilized. Minimodule studies …

Smart Grid In Tanzania: Research Opportunities, Aviti Thadei Mushi

Tanzania Journal of Engineering and Technology (TJET)

reinvigorated its power generation capacity significantly to ensure smooth execution of its industrialization agenda and cope with the fourth industrial revolution. To ensure reliable availability of power to sustain its growing economy, Tanzania embarked on a deliberated measure to forge an energy mix. This deliberate measure encompasses the use of renewable energy technologies such as wind, solar, biomass, wastes, and micro hydro; natural gas; and other energy sources which are locally available including coal and geothermal. To effectively and efficiently manage such a growing power system and make electricity accessible to all for higher levels of industrial investment and services, …

Isolation And Performance Test Of Green Low Dosage Hydrate Inhibitors From Local Materials For Improving Flow Assurance In Oil And Gas Industry, Makungu Madirisha

Tanzania Journal of Engineering and Technology (TJET)

The formation of gas hydrates in oil and gas industry can be minimized or prevented by the use of inhibitors. This paper reports on hemicellulose and modified lignin as low dosage gas hydrate inhibitors (LDGHIs). LDGHIs were isolated from sugarcane bagasse (SCB), plant gum exudates (PGE) of Acacia trees, and coconut coir, and further characterized by Attenuated Total Reflectance - Fourier Transform Infrared (ATR-FTIR) spectrometer, porosimeter and thermogravimetric analyzer (TGA). The PGE and SCB yielded 77.75% and 12.38% of hemicellulose, respectively, while coconut coir yielded 35.59% of lignin which was modified to sodium lignosulfonate (SLS) to improve its solubility in …

Experimental Investigation On Recovery Of Micro Hydropower Dump Load Through Oil Heating System, Joseph H. Kihedu Dr.

Tanzania Journal of Engineering and Technology (TJET)

Micro hydropower power generates electrical energy to meet connected electrical demand, that normally fluctuates causing imbalances. Electronic load controller is then used to balance power system by diverting surplus generated power to the dump load commonly resistive load such as bulk water heater. This study investigated use of oil heating system as a replacement for conventional resistive dump load. In comparison to water, oil has high thermal retention therefore can serve as good thermal media. Dump load range ranged between 17 kW to 78 kW. A 6-kW electrical heater was used for laboratory oil heating system from which heated oil …