Power and Energy Commons^™

Nitrogen-Doped Graphite Felt On The Performance Of Aqueous Quinone-Based Redox Flow Batteries, Heng Zhang, Li-Xing Xia, Shan Jiang, Fu-Zhi Wang, Zhan-Ao Tan

Journal of Electrochemistry

Modification of electrode is vitally important for achieving high energy efficiency in aqueous quinone-based redox flow batteries (AQRFBs). The modification of graphite felt (GF) was carried out by means of urea hydrothermal reaction, and simultaneously, the effects of hydrothermal reaction time on the functional groups and surface structure of nitrogen-doped graphite felt were studied. The surface morphology and defect, element content and surface chemical state of the modified electrode were characterized by scanning electron microscopy (SEM), Brunauer-Emmett-Teller (BET) test, Raman spectroscopy, and X-ray photoelectron spectroscopy (XPS). The electrochemical performance of the modified electrodes was evaluated by cyclic voltammetry, electrochemical impedance …

An In-Situ Raman Spectroscopic Study On The Interfacial Process Of Carbonate-Based Electrolyte On Nanostructured Silver Electrode, Yu Gu, Yuan-Fei Hu, Wei-Wei Wang, En-Ming You, Shuai Tang, Jian-Jia Su, Jun Yi, Jia-Wei Yan, Zhong-Qun Tian, Bing-Wei Mao

Journal of Electrochemistry

The solid-electrolyte interphase (SEI) plays a key role in anodes for rechargeable lithium-based battery technologies. However, a thorough understanding in the mechanisms of SEI formation and evolution remains a major challenge, hindering the rapid development and wide applications of Li-based batteries. Here, we devise a borrowing surface-enhanced Raman scattering (SERS) activity strategy by utilizing a size optimized Ag nanosubstrate to in-situ monitor the formation and evolution of SEI, as well as its structure and chemistry in an ethylene carbonate-based electrolyte. To ensure a reliable in-situ SERS investigation, we designed a strict air-tight Raman cell with a three-electrode configuration. Based on …

Electrochemical Performance Of Porous Ceramic Supported Tubular Solid Oxide Electrolysis Cell, Heng-Ji Wang, Wen-Guo Chen, Zhou-Yi Quan, Kai Zhao, Yi-Fei Sun, Min Chen, Ogenko Volodymyr

Journal of Electrochemistry

Solid oxide electrolysis cell (SOEC) is an efficient and clean energy conversion technology that can utilize electricity obtained from renewable resources, such as solar, wind, and geothermal energy to electrolyze water and produce hydrogen. The conversion of abundant intermittent energy to hydrogen energy would facilitate the efficient utilization of energy resources. SOEC is an all-ceramic electrochemical cell that operates in the intermediate to high temperature range of 500–750 ℃. Compared with traditional low temperature electrolysis technology (e.g., alkaline or proton exchange membrane cells operating at ~100 ℃), the high-temperature SOEC can increase the electrolysis efficiency from 80% to ~100%, providing …

On The Integration Of Hydrogen Into Integrated Energy Systems: Reliability Assessment And Optimal Operation And Planning, Tao Wu

Electrical Engineering Theses and Dissertations

Hydrogen, regarded as one of the cleanest energy carriers, is gaining momentum to support the realization of net-zero emissions integrated energy systems due to its versatile applications across various energy sectors. In the near-term, blending hydrogen into integrated energy systems offers opportunities to promote hydrogen integration considering the current high levelized cost of hydrogen. However, because of the different physical properties of hydrogen, the impact of hydrogen on the reliability and optimal operation of integrated energy systems should be investigated to maximize the share of hydrogen without degrading the functionality of integrated energy systems. In the long-term, the optimal planning …

Quantum And Classical Learning Algorithms For Grid Integration Of Energy Storage And Renewables: Operation, Modelling, And Planning, Bin Huang

Electrical Engineering Theses and Dissertations

With the pressing net-zero objectives, renewable energy sources (RESs) and energy storage systems (ESSs), which serve as the main force in providing low-carbon energy and flexibility, are being integrated into the power systems at an unprecedented rate. The rising penetration trend of RESs and ESSs brings both opportunities and challenges. In the short term, the inherent intermittency of RESs and high capital costs of ESSs introduce obstacles to revenue maximization for hybrid power plants and complicate the provision of privacy-ensured, high-fidelity network modeling. Long-term planning faces the hurdle of expanding ESS capacity in microgrids while maintaining power supply resilience with …

Design, Fabrication And Characterization Of Zero Power Sensor/Harvester For Smart Grid Applications, Zeynel Guler

Mechanical Engineering ETDs

This study presents a flexible sensor/harvester device to be used in both electromagnetic sensing and energy harvesting applications for smart grids. When a current passes through a wire, the sensor detects the magnetic field created by that current. The sensor magnet interacts with the wire magnetic field resulting in a transfer of energy through the piezoelectric cantilever. Piezoelectric, conductive, magnetic, and magnetostrictive composite thin films were prepared to fabricate this device.

Initially, the magnet of the cantilever was optimized considering its shape, thickness, length, taper angle etc. via both simulations and experiments. Peak to peak voltage versus cantilever position graph …

The Need For Energy Storage On Renewable Energy Generator Outputs To Lessen The Geeth Effect, I.E. Short-Term Variations Mainly Associated With Wind Turbine Active Power Output, Tony Kealy

Articles

Many studies investigating the short-term variations associated with the power output from wind turbine generators utilise simulated or modelled data in the analysis. This current study uses short-term empirical data downloaded directly from operational wind turbines via electrical power quality meters. The empirical data shows that the short-term variations (one-second or sub-one-second timeframe) occur continuously over most of the power output range. A novel name is proposed, the Geeth Effect, for this variability phenomenon. The Geeth Effect is measured using the coefficient of variation mathematical expression and is likely contributing to (i) lower-than-expected financial and environmental benefits associated with …

Adaptive Traction, Power And Torque Control Strategies And Optimization In An All-Electric Powertrain, Aymane Hidara

Theses and Dissertations

Electric and hybrid-electric vehicles lean heavily on intricate control algorithms to provide smooth, reliable, and secure operations under any driving conditions. Three distinct supervisory control strategies have been developed, each aiming to improve reliability and vehicle performance of a dual-motor electric vehicle equipped with an all-wheel-drive, fully electric powertrain. These algorithms are adept at dynamically modulating and constraining the torque provided to the wheels, leveraging two autonomous permanent magnet electric drive units. This study utilizes a vehicle model jointly provided by MathWorks and General Motors in partnership with industry sponsors. The these strategies were implemented in the model and enhanced …

Vertical Free-Swinging Photovoltaic Racking Energy Modeling: A Novel Approach To Agrivoltaics, Koami Soulemane Hayibo, Joshua M. Pearce

Electrical and Computer Engineering Publications

To enable lower-cost building materials, a free-swinging bifacial vertical solar photovoltaic (PV) rack has been proposed, which complies with Canadian building codes and is the lowest capital-cost agrivoltaics rack. The wind force applied to the free-swinging PV, however, causes it to have varying tilt angles depending on the wind speed and direction. No energy performance model accurately describes such a system. To provide a simulation model for the free-swinging PV, where wind speed and direction govern the array tilt angle, this study builds upon the open-source System Advisor Model (SAM) using Python. After the SAM python model is validated, a …

Resilient, Sustainable, And Secure Systems Support For Ultra-Low-Power Computational Things, Nicole Tobias

All Dissertations

Wireless battery-free and energy-harvesting devices are expanding the reach and vision of the Internet of Things, where trillions of embedded computational things interconnect ubiquitously around us and inform many different aspects of our everyday lives. Designing these systems without batteries and interconnecting wires lowers maintenance, environmental, and economic costs while also extending device lifetime and deployment opportunities. Over the last decade, research on these ultra-low-power embedded sensors and systems has dramatically increased — enabling new and exciting prospects in many different scientific fields, from smart building and health monitoring applications to animal and activity tracking.

These systems are not without …

Ism-Band Energy Harvesting Wireless Sensor Node, Fnu Naveed

Graduate Theses and Dissertations

In recent years, the interest in remote wireless sensor networks has grown significantly, particularly with the rapid advancements in Internet of Things (IoT) technology. These networks find diverse applications, from inventory tracking to environmental monitoring. In remote areas where grid access is unavailable, wireless sensors are commonly powered by batteries, which imposes a constraint on their lifespan. However, with the emergence of wireless energy harvesting technologies, there is a transformative potential in addressing the power challenges faced by these sensors. By harnessing energy from the surrounding environment, such as solar, thermal, vibrational, or RF sources, these sensors can potentially operate …

Design Of A Low-Power Delay-Locked Loop-Based 8x Frequency Multiplier In 22 Nm Fdsoi, Naveed, Jeff Dix

Electrical Engineering Faculty Publications and Presentations

A low-power delay-locked loop (DLL)-based frequency multiplier is presented. The multiplier is designed in 22 nm FDSOI and achieves 8× multiplication. The proposed DLL uses a new simple duty cycle correction circuit and is XOR logic-based for frequency multiplication. Current starved delay cells are used to make the circuit power efficient. The circuit uses three 2× stages instead of an edge combiner to achieve 8× multiplication, thus requiring far less power and chip area as compared to conventional phase-locked loop (PLL) circuits. The proposed 8× multiplier occupies an active area of 0.09 mm2. The measurement result shows ultra-low power consumption …

Gpu Based Monte Carlo Estimation Of Eddy Current Losses In Electromagnetic Coil-Core System, Adwaith Ravichandran

Theses and Dissertations

A novel parallelizable probabilistic approach to model eddy currents in AC electromagnets is presented in this research. Consequently, power loss associated with the formation of these eddy currents is estimated and validated using experimental data. Furthermore, predicting the effect of ferromagnetic alternating field enhancement on power loss in the source excitation winding has been an active area of research. Unlike a stationary field, an alternating sinusoidal field diffuses partially into the ferromagnetic material leading to a predictably sub-optimal field enhancement. To model these physics, finite element techniques employ nonlinear iterative solvers which are time consuming. A novel method is developed …

Hybrid Wall Outlet For Ac Or Dc Power Delivery, Garrett Knoller, Kerr Allan, Greg Perini

Electrical Engineering

The goal of this project is to develop hybrid DC and AC wall outlets for an efficient, flexible power interface. A DC plug standard is also proposed to allow DC devices to be safely powered by the outlet with the correct DC voltage for each device. The primary objective is to create a power outlet compatible with the proposed DC plug as well as NEMA 5-15 AC plugs, enabling the same outlet to power both types of load as needed. The outlet is intended for buildings and systems transitioning to an isolated DC grid to encourage DC development and adoption. …

Dc To Ac Inverter For A Microgrid-Inspired Power Distribution Architecture For Electric Vehicles, Bryan A. Carrillo Martinez, Eli Blacklock, Paul A. Samson, William S. Holt-Hillis

Electrical Engineering

This project builds upon the prototyping of a microgrid-inspired power distribution architecture for electric vehicles (EVs). The efficacy of this prototype aims to inform a full-scale power distribution system that charges an EV battery, supports the electric grid with important ancillary services, performs peer-to-peer EV charging, and works in conjunction with other AC and DC sources and loads. The scope of this report focuses specifically on the design, construction, and testing of the DC/AC inverter. Future development of this distribution architecture will incorporate synchronous generators, a battery management system, and an Arduino/Raspberry Pi-based communication system to fully simulate an electric …

Model-Free Methods To Analyze Pmu Data In Real-Time For Situational Awareness And Stability Monitoring, Sean Kantra

All Dissertations

This dissertation presents and evaluates model-free methodologies to process Phasor Measurement Unit (PMU) data. Model-based PMU applications require knowledge of the system topology, most frequently the system admittance matrix. For large systems, the admittance matrix, or other system parameters, can be time-consuming to integrate into supporting PMU applications. These data sources are often sensitive and can require permissions to access, delaying the implementation of model-based approaches. This dissertation focuses on evaluating individual model-free applications to efficiently perform functions of interest to system operators for real-time situational awareness. Real-time situational awareness is evaluated with respect to central digitization where the PMU …

Hpc-Enabled Fast And Configurable Dynamic Simulation, Analysis, And Learning For Complex Power System Adaptation And Control, Cong Wang

All Dissertations

This dissertation presents an HPC-enabled fast and configurable dynamic simulation, analysis, and learning framework for complex power system adaptation and control. Dynamic simulation for a large transmission system comprising thousands of buses and branches implies the latency of complicated numerical computations. However, faster-than-real-time execution is often required to provide timely support for power system planning and operation. The traditional approaches for speeding up the simulation demand extensive computing facilities such as CPU-based multi-core supercomputers, resulting in heavily resource-dependent solutions. In this work, by coupling the Message Passing Interface (MPI) protocol with an advanced heterogeneous programming environment, further acceleration can be …

A Scalable Transmission And Distribution Co-Simulation Platform For Ibr-Heavy Power Systems, Yousu Chen

All Dissertations

The grid is evolving rapidly to meet the requirements of the clean energy transition. This evolution involves an increasing penetration of renewable energy resources and new complexities with a larger number of devices and controls spread across transmission and distribution networks. The boundary between transmission and distribution becomes blur. Consequently, we face significant challenges in managing the fundamental shift in power system physics. The ubiquitous use of Inverter Based Resources (IBRs) throughout the transmission and distribution systems has made it more difficult for the grid to maintain grid stability under dynamic conditions. Therefore, there is a strong need to explore …

An Analysis On Wildfire Mitigations Employed By Utilities In California, Evan Luu

Master's Theses

As climate change continues to worsen, environmental effects are felt by many people around the world. In California, some of its most damaging wildfires have been found to be started by utilities. As the state continues to suffer from worsening wildfire conditions, the utilities need to implement a variety of wildfire mitigations to help reduce the risk of wildfires that can affect the state and its residents. This paper analyzes the effectiveness of four mitigations employed across three California utilities and suggests potential ways for the mitigations to be used together. The technologies evaluated are covered conductor, rapid earth fault …

A Tessellation Of Engineers, Grace Jenkins Welsh

University Honors Theses

A capstone project is the culmination of what a student has learned while pursuing an undergraduate degree. A project of this magnitude requires a lot of time and dedication from every member of the team. This essay looks back at the experience of an electrical engineering student participating in the design of an auxiliary power and protection of a planned substation. The author describes the team's work, how they performed as a team, and their involvement with the professional sponsor and advisor. The author examines the experience with the goal of informing and encouraging prospective engineering students who may be …

Constructing Carbon-Encapsulated Nifev-Based Electrocatalysts By Alkoxide-Based Self-Template Method For Oxygen Evolution Reaction, En-Hui Ma, Xu-Po Liu, Tao Shen, De-Li Wang

Journal of Electrochemistry

The development of green and sustainable water-splitting hydrogen production technology is beneficial to reducing the over-reliance on fossil fuels and realizing the strategic goal of "carbon neutral". As one of the half reactions for water splitting, oxygen evolution reaction has suffered the problems of sluggish four-electron transfer process and relatively slow reaction kinetics. Therefore, exploring efficient and stable catalysts for oxygen evolution reaction is of critical importance for water-splitting technology. Metal alkoxides are a series of compounds formed by the coordination function of metal ions with alcohol molecules. Metal alkoxides possess the double advantages of organic materials and inorganic materials, …

Lif-Sn Composite Modification Layer To Modify Garnet/Lithium Metal Interface, Wu Yang, Xue-Fan Zheng, Yu-Qi Wu, Zheng-Liang Gong

Journal of Electrochemistry

The growing demands for electric vehicles and consumer electronics; as well as the expanding renewable energy storage market; have promoted extensive research on energy storage technologies with low costhigh energy density and safety. Lithium (Li) metal and solid-state electrolytes are considered as important components for next-generation batteries because of their great potential for improvements in energy density and safety performance. Inorganic garnet-type solid electrolytes with high Li-ion conductivity (about 10^-3 S·cm^-1) and high shear modulus (55 GPa) are considered to be ideal solid-state electrolytes; however; the issue of Li dendrite growth still obstructs their practical application. Herein; …

Preparation And Lithium Storage Properties Of Carbon Confined Li3Vo4 Nano Materials, Jia-Qi Fan, Huan-Qiao Song, Jia-Ying An, Amantai A-Yi-Da-Na, Mo Chen

Journal of Electrochemistry

Li₃VO₄, as a promising anode material for lithium ion batteries, has been widely studied because of its low and safe voltage, and large capacity. However, its poor electronic conductivity impedes the practical application of Li₃VO₄ particularly at high rates. In this paper, carbon confined Li₃VO₄ nano materials (Li₃VO₄/C) were synthesized by hydrothermal and solid-phase method, and for comparison, the Li₃VO₄ (N) nano materials without carbon confinement and Li₃VO₄ (B) materials were also synthesized by pure solid-phase method. The composition, structure, …

Peg-Water Electrolyte For High-Performance Zinc Iodine Dual-Ion Batteries, Xiao-Feng Qu, Yu-Ting Tang, Xin-Cheng He, Jia-Sheng Zhou, Zi-Heng Tang, Wen-Hua Feng, Jun Liu

Journal of Electrochemistry

Thanks to abundant resource and rapid redox reaction kinetics, iodine is regarded as promising positive materials inthe batteries. However, the shuttling effect due to the high solubility of iodine in the electrolyte makes the performance of battery poor. In this paper, polyethylene glycol (PEG400) and potassium iodide were added into zinc-ion aqueous electrolyte. PEG400 could complex with iodine to reduce the dissolution of iodine, therefore alleviating the formation of soluble triiodide (I₃^–) from iodine and iodide ions. Furthermore, this electrolyte was used in the battery with double carbon cloths as the current collectors, double separators and zinc …

Resonance Damping Of Lcl Filters Using Capacitor-Current Proportional-Integral Positive Feedback Method For Grid-Integrated Fuel Cell System, Majid Hosseinpour, Amin Kholousi

Emirates Journal for Engineering Research

Nowadays, the use of grid-integrated inverter proton exchange membrane fuel cell (PEMFC) systems is becoming more prevalent due to their efficiency and favorable environmental effects. Switching the grid-connected inverters causes high-frequency harmonics, which are eliminated using LCL filters. These filters are susceptible to instability when their resonant frequency is affected by changes in network impedance. Active damping methods are used to weaken the resonance of LCL filters. However, the grid-connected inverter is prone to be unstable under grid impedance variations due to the negative equivalent resistance resulting by digital control delays. As a solution to this problem, the capacitor-current proportional-integral …

Analysis Of Sectoral Energy Demand In Pakistan, Raza Ali Khan, Mirza Faizan Ahmed, Jaweriya Naz

CBER Conference

The purpose of this research is to estimate the energy demand for different sectors including commercial, industrial, residential, transportation and agriculture. For this purpose, different factors affecting the demand for energy in each sector have been analyzed. The adopted methodology is Box Jenkins, which is a systematic approach of identification, estimation, diagnostic checks and forecasting of the model.

Food-Water-Energy Nexus In The Perspective Of Green Revolution, Green Energy, Legal And Institutional Framework: A Killian Based Adjusted Bootstrap Approach, Zia Ur Rahman

CBER Conference

Food and water energy is crucial for human well-being, sustainable development, and poverty reduction. The growing global demand driven by population growth, economic development, urbanization, changing diets, technological advancements, and climate change projections indicates a significant increase in the need for these resources. Understanding the intricate interdependencies between food, water, and energy is essential for effectively addressing these challenges and fostering a prosperous and sustainable future. Therefore, this study incorporated statistical data collected from the Pakistan Economic Survey and the World Governance Indicator from 1990 to 2022 to elucidate the complex connection between food, water, and energy.

Does Green Energy Really Matter For Environment And Economic Sustainability? Validating The Long-Standing Existing Empirics On Pakistan Economy, Syed Kafait Hussain Naqvi

CBER Conference

The empirical outcomes of the study validate the widespread concern of the literature on the existence of the “growth hypothesis” which supports, that there is a systematic positive causation running from green energy to economic sustainability. The study findings suggest that regulations in the energy sector can encourage the applications of green energy resources, particularly in the real sector of the economy, leading to reduced emissions.

Demand Analysis Of Energy Mix In District Kotli Azad Jammu And Kashmir, Pakistan, Syed Kafait Hussain Naqvi

CBER Conference

This study is an effort to empirically analyze the household’s demand for energy mix (electricity, liquefied petroleum gas (LPG), kerosene, and firewood) in the District Kotli, AJK. The study estimates the demand elasticities (price and expenditure) by employing the Linear Approximate Almost Ideal Demand System (LA-AIDS) to 384 households sampled across District Kotli, AJK in 2017. The empirical estimations are carried out by using the Seemingly Unrelated Regression (SUR), keeping intact the adding-up, homogeneity and symmetry restrictions.

Improving Cellphone-Based Bio-Imaging Technique For Fluorescence Detection, Erteza T. Efaz

LSU Master's Theses

The research presented in this thesis focuses on the design, development, and evaluation of a fluorescence detection system. The system is implemented primarily as an Android application, Auto Camera, which leverages smartphone cameras to capture and analyze fluorescent images. The application provides a user-friendly interface with some configurable features like exposure time, ISO speed, and storage limit; as well as defining detection thresholds and setting acquisition intervals. This study begins with the architectural framework of the Android application, which is written in Java using Android Studio. The API compatibility is set to version 33, and users are prompted to grant …