Power and Energy Commons^™

An Expandable Micromotor Dc Drive System, Michael Ruelan, Justin Gragg

Electrical Engineering

This report documents the design phases and fabrication of an expandable micro-motor DC drive system. This project illustrates that a flexible range of output power demands can be met from a small DC micro-motor drive unit with the use of power electronics.

In this project miniature DC micromotor drives, each capable of drawing up to 5.5 amps rated current (5 amps due to the utilization of a 5 amp fuse), were designed as card inserts that can be conveniently inserted in parallel in to a cardholder within the console. The “insert” feature allowed our console to successfully draw up to …

Magnetic Design Web Application, Michael Brim

Electrical Engineering

The automated Magnetic Design Web Application, available at http://www.magneticdesign.org, generates the full design process of a power transformer, gapped inductor and toroidal inductor given design specifications provided by the user. Calculations are accomplished using Area Product, Ap, or Core Geometry, Kg, procedures. All design processes mirror the format used in Dr. Taufik’s Introduction to Magnetic Design lecture-notes. An administrative backend is provided where instructors can add or modify core design values to expand the array of materials used. The project aims to aid student understanding of magnetic design and course concepts while allowing instructors to broaden the scope of material …

Simulation Of Cal Poly Super System Simulink Model Using Insolation Variation, Jacob Kory

Electrical Engineering

This senior project focuses on simulation of the Cal Poly SuPER system using an insolation model. First, local and historical weather data is examined to determine the range of limits that the model will utilize. Then, the insolation model is constructed to fit into the existing SuPER model. The overall system is tested under a variety of insolation values to determine system performance of motor and static loads. Based on these simulations, several factors of the current model are discovered that limit the power consumption profile under off-peak load conditions. Finally, recommendations on improvements to the model are discussed

Pulse Density Modulated Soft Switching Cycloconverter, Jesse Timothy Adamson

Master's Theses

Single stage cycloconverters generally incorporate hard switching at turn on and soft switching at turn off. This hard switching at turn on combined with the slow switching speeds of thyristors (the switch of choice for standard cycloconverters) limits their use to lower frequency applications.

This thesis explores the analysis and design of a pulse density modulated (PDM), soft switching cycloconverter. Unlike standard cycloconverters, the controller in this converter does not adjust thyristor firing angles. It lets only complete half cycles of the input waveform through to the output. This allows and requires a much greater frequency step down from the …

Wave Energy Converter Performance Modeling And Cost Of Electricity Assessment, Dmitri Jarocki

Master's Theses

California is experiencing a rapid increase in interest for the potential of converting ocean waves into clean electricity. Numerous applications have been submitted for the permitting of such renewable energy projects; however the profitability, practicability, and survivability have yet to be proven. Wave energy conversion technology has steadily matured since its naissance in the 1970’s, several wave energy power installations currently exist, and numerous plans for commercial power plant are in the works on the shores of multiple continents. This study aims to assess the economic viability of two proposed commercial wave energy power plant projects on the Central California …

Near Real-Time Exercise Machine Power Statistics Reporting, Brendan C. Asche

Master's Theses

Cal Poly’s Recreation Center expansion project provides an opportunity to implement Energy Harvesting From Exercise Machines (EHFEM). Part of this implementation is a system that reports the exercise machines’ energy production. Although products capable of reporting exercise machine energy harvesting statistics exist, they have limited capabilities. This thesis project defends a system capable of reporting exercise machine power statistics in near real-time.

The system consists of display, database, and power measurement modules. The display module presents statistics in an interactive, graphical, and widely-accessible way. The database module provides an efficient way of organizing and accessing stored statistics. Multiple power measurement …

Transmission System Construction And Analysis, Siyuan Wang

Electrical Engineering

In this project we designed and analyzed a simple power system from scratch using Positive Sequence Load Flow (PSLF) and Computer Aided Protection Engineering (CAPE). PSLF is used to solve the balance transmission system. The simulation results from PSLF prove the proposed methodology numerical accuracy. Short circuit duty is simulated using CAPE to find the fault current each bus can have on the system, so engineers can protect the system with the appropriate protection scheme. This project totals two major loads with a combine MW intake of 450 MW. In order to supply multiple loads with constant power, the system …

High Voltage Resonant Self-Tracking Current-Fed Converter, Scott Logan Mcclusky

Master's Theses

High voltage power supply design presents unique requirements, combining safety, controllability, high performance, and high efficiencies. A new Resonant Self-Tracking Current-Fed Converter (RST-CFC) is investigated as a proof-of-concept of a high voltage power supply particularly for an X-ray system. These systems require fast voltage rise times and low ripple to yield a clear image.

The proposed converter implements high-frequency resonance among discrete components and transformer parasitics to achieve high voltage gain, and the self-tracking nature ensures operation at maximum gain while power switches achieve zero-voltage switching across the full load range. This converter exhibits an inherent indefinite short-circuit capability. Theoretical …

Exercise Power Grid Display And Web Interface, Alexander (Alex) Chernetz

Computer Engineering

The 2008-2009 expansion of the Recreation Center at Cal Poly includes three new rooms with cardiovascular fitness equipment. As part of its ongoing commitment to sustainable development, the new machines connect to the main power grid and generate power during a workout. This document explains the process of quantifying and expressing the power generated using two interfaces: an autonomous display designed for a television with a text size and amount of detail adaptable to multiple television sizes and viewing distances, and an interactive, more detailed Web interface accessible with any Java-capable computer system or browser.

Solar Panel Experiment, John Hauger

Electrical Engineering

This senior project will focus on creating a suitable testing procedure for the provided solar panel system. The testing parameters will be based on the expected 60W output power of the system. The complete procedure will provide a thorough analysis of the power flow and overall efficiency of the system.

This senior project report will discuss the importance of this experiment in the Electrical Engineering curriculum, the system requirements and parameters tested in the design, and the provided results based on the test conditions. In addition, this report will include the complete testing procedure and recommendations for possible future additions …

Energy Harvesting From Elliptical Machines: Dc Converter Troubleshooting, Michelle Lum, Jonathan Yuen

Electrical Engineering

In continuing the global effort to integrate innovative technology and renewable energy in the world’s power system, Cal Poly endeavors to harvest energy from elliptical machines and feed that power back into the electrical grid. This continuation of the previous project, Energy Harvesting from Exercise Machines Self‐generating Elliptical Machines, seeks an alternative DC to DC converter to function within the existing elliptical self‐generating system. By attempting to implement this new DC to DC converter, the project strives to reduce the size of the converter in order to mount it on the elliptical machine. The project also tries to explain how …

Switching Circuit For A Permanent Magnet Dc Motor, Alex Boatman

Electrical Engineering

The project is a circuit that will basically supply current from the battery to the different stator coils at opportune moments. With a hall-effect sensor on the shaft as a feedback to a microcontroller, I was able to toggle switches based on the position of the shaft at the moments where we would be using as little power as possible. The operation of the control circuit works similar to a stepper motor; it takes a signal from the microcontroller that is sent to some FET drivers, which in turn sends signals to the FETs to open or close as the …

Lab-Scale Thyristor Rectifier And Static Var Compensator Circuits, Haroun Idris, Ibrahim Idris

Electrical Engineering

The purpose of this project is to design thyristor circuits by using single-phase FCRO 4100 firing board donated by ENERPRO. These circuits in conjunction with a thyristor module will be used for future lab experiments in power electronics courses.

The first part of this project is to study the full effect of a firing angle on a controlled single phase full bridge thyristor rectifier circuit. Furthermore, the resulting circuit setup will be implemented as part of future lab experiments in Power Electronics I course. The next purpose of this project is to design a small-scale Static VAR Compensator (SVC) lab …

Dc-Dc Converter For Harvesting Energy From An Exercise Bike, Henry Ureh, Chris Henry

Electrical Engineering

Create an efficient buck-boost converter that adapts to input voltage range from ~3.8V to 70V, and outputs 13.7V DC, the voltage required by a charge controller to charge a battery. The energy stored in the battery will be supplied back to the grid.

The cost of energy saved by the converter should eventually cover the initial price of the converter. The converter should help reduce the net power consumption of the exercise machines used in the Cal Poly gym

Overcurrent Coordination Study, Edwin Pho

Electrical Engineering

No abstract provided.

Design And Development Of Rapid Battery Exchange Systems For Electric Vehicles To Be Used As Efficient Student Transportation, Jonathan A. Bevier

Master's Theses

Rapid battery exchange systems were built for an electric van and pedal assist electric bike as a method of eliminating the need to recharge the vehicles batteries in order to increase the feasibility of using electric propulsion as a method of efficient student transportation. After selecting proper materials it was found that the systems would need a protective coating to ensure consistent operation. 1020 cold rolled steel samples coated with multiple thicknesses of vinyl resin paint, epoxy resin paint, and powder coating were subjected to environmental wear tests in order to determine if the type and thickness of common protective …

Multidisciplinary Design Optimization Of An Extreme Aspect Ratio Hale Uav, Bryan J. Morrisey

Master's Theses

ABSTRACT

Multidisciplinary Design Optimization of an Extreme Aspect Ratio HALE UAV

Bryan J. Morrisey

Development of High Altitude Long Endurance (HALE) aircraft systems is part of a vision for a low cost communications/surveillance capability. Applications of a multi payload aircraft operating for extended periods at stratospheric altitudes span military and civil genres and support battlefield operations, communications, atmospheric or agricultural monitoring, surveillance, and other disciplines that may currently require satellite-based infrastructure. Presently, several development efforts are underway in this field, including a project sponsored by DARPA that aims at producing an aircraft that can sustain flight for multiple years and …

1.5 Kw Pwm Bipolar Inverter, Michael Newbry, Percy Vigo

Electrical Engineering

This report focuses on the design, construction, and testing of a PWM inverter capable of converting 1.5 kW. The purpose for the inverter is to convert DC solar energy to power an air conditioner. The inverter uses a bipolar control scheme which comes from a PIC microcontroller. This report contains the advantages and disadvantages of all the PWM control schemes. Furthermore, the testing shows bipolar inverter characteristics and a sample use of filters to obtain sinusoidal waveforms. The design of the circuit makes the inverter easy and safe to use and test.

Novel Current-Fed Boundary-Mode Parallel-Resonant Push-Pull Converter, Jonathan David Paolucci

Master's Theses

The inherent difficulty in designing high voltage power supplies is often compounded by demands of high reliability, high performance, and safe functionality. A proposed high step-up ratio DC-DC converter meets the exacting requirements of applications such as uninterruptible power systems, radar, and pulsed power systems. The proposed DC-DC converter topology combines a multi-phase buck input stage with a novel self-tracking zero-voltage-switching (ZVS) resonant output stage. Traditionally, the inclusion of multiple power processing stages within a power supply topology severely degrades the overall converter efficiency. Due to the inherent high efficiency per stage, however, this effect is minimized. The self-tracking switching …

Harmonic Analysis Of A Static Var Compensated Mixed Load System, James David Ruckdaschel

Master's Theses

As power electronic based controllers and loads become more prevalent in power systems, there is a growing concern about how the harmonics generated by these controllers and loads affect the power quality of the system. One widely used power electronic based load is the Variable Frequency Drive (VFDs) used to vary the speed of an induction motor; whereas a common example of a power electronic based controller used in power systems is the Static VAR Compensator (SVC) for improving a system’s power factor. In this thesis, the harmonic content and overall performance of a system including both a VFD and …

Analysis And Design Of Continuous Input Current Multiphase Interleaved Buck Converter, Sean Michael Zich

Master's Theses

The power requirements for microprocessors have been increasing per Moore's Law. According to International Technology Roadmap (ITRS), Voltage Regulator Module (VRM) for microprocessors will be about 200 W at 1 V output in 2010. With the VRM’s topology of synchronous buck, serious technical challenges such as small duty cycle, high switching frequencies, and higher current demands, contribute to decreased power density and increased cost.

This thesis proposes a Continuous Input Current Multiphase Interleaved Buck topology to solve the technical challenges of powering future microprocessors. This new topology is aimed to improve past topologies by providing continuous input current and improved …

Analysis And Design Of Multiphase Multi-Interleave Dc-Dc Converter With Input-Output Bypass Capacitor, Furqan Mubashir Saleemi

Master's Theses

The power requirements for the microprocessor have been increasing as per Moore's Law. According to International Technology Roadmap (ITRS), the Voltage Regulator Module (VRM) for the microprocessor will be 200 W(with 1V, 200A output) in 2010. With the VRMs topology of synchronous buck, serious technical challenges such as small duty cycle, high switching frequencies, and higher current demands, contribute to decreased power density and increased cost. This thesis proposes a Multiphase Multi-Interleave Buck topology to solve the technical challenges of powering future microprocessors. The critical design parameter values are selected using the theoretical design equations and calculations. The design is …