Other Electrical and Computer Engineering Commons^™

A Novel Path Loss Forecast Model To Support Digital Twins For High Frequency Communications Networks, James Marvin Taylor Jr.

Department of Electrical and Computer Engineering: Dissertations, Theses, and Student Research

The need for long-distance High Frequency (HF) communications in the 3-30 MHz frequency range seemed to diminish at the end of the 20th century with the advent of space-based communications and the spread of fiber optic-connected digital networks. Renewed interest in HF has emerged as an enabler for operations in austere locations and for its ability to serve as a redundant link when space-based and terrestrial communication channels fail. Communications system designers can create a “digital twin” system to explore the operational advantages and constraints of the new capability. Existing wireless channel models can adequately simulate communication channel conditions with …

Vector Magneto-Optical Generalized Ellipsometry On Magnetic Slanted Columnar Heterostructured Thin Films, Chad Briley

Department of Electrical and Computer Engineering: Dissertations, Theses, and Student Research

Modern material growth techniques allow for nano-engineering highly complex three dimensionally nanostructured materials. These nano-engineered materials possess highly anisotropic physical properties that are significantly different from that of their bulk counterparts. The magnetization properties of nano-engineered materials can be modified through a close range interaction known as magnetic exchange. These materials are referred to as magnetic exchange-coupled materials. Exchange-coupled magnetic materials are composite magnetic materials where the magnetization of one material is influenced by the magnetization state of the neighboring materials.

The author describes the creation of a representative sample set of exchange-coupled nanoengineered magnetic materials. These materials are created …

Deep Learning And Polar Transformation To Achieve A Novel Adaptive Automatic Modulation Classification Framework, Pejman Ghasemzadeh

Department of Electrical and Computer Engineering: Dissertations, Theses, and Student Research

Automatic modulation classification (AMC) is an approach that can be leveraged to identify an observed signal's most likely employed modulation scheme without any a priori knowledge of the intercepted signal. Of the three primary approaches proposed in literature, which are likelihood-based, distribution test-based, and feature-based (FB), the latter is considered to be the most promising approach for real-world implementations due to its favorable computational complexity and classification accuracy. FB AMC is comprised of two stages: feature extraction and labeling. In this thesis, we enhance the FB approach in both stages. In the feature extraction stage, we propose a new architecture …

Amodal Instance Segmentation And Multi-Object Tracking With Deep Pixel Embedding, Yanfeng Liu

Department of Electrical and Computer Engineering: Dissertations, Theses, and Student Research

This thesis extends upon the representational output of semantic instance segmentation by explicitly including both visible and occluded parts. A fully convolutional network is trained to produce consistent pixel-level embedding across two layers such that, when clustered, the results convey the full spatial extent and depth ordering of each instance. Results demonstrate that the network can accurately estimate complete masks in the presence of occlusion and outperform leading top-down bounding-box approaches.

The model is further extended to produce consistent pixel-level embeddings across two consecutive image frames from a video to simultaneously perform amodal instance segmentation and multi-object tracking. No post-processing …

Optimal Allocation Of Energy Storage And Wind Generation In Power Distribution Systems, Carlos Mendoza

Department of Electrical and Computer Engineering: Dissertations, Theses, and Student Research

The advent of energy storage technologies applications for the electric power system gives new tools for planners to cope with the operation challenges that come from the integration of renewable generation in medium voltage networks. This work proposes and implements an optimization model for Battery Energy Storage System (BESS) and distributed generation allocation in radial distribution networks. The formulation aims to assist distribution system operators in the task of making decisions on energy storage investment, BESSs' operation, and distributed generation penetration's level to minimize electricity costs. The BESSs are required to participate in energy arbitrage and voltage control. In addition, …

Pixel-Level Deep Multi-Dimensional Embeddings For Homogeneous Multiple Object Tracking, Mateusz Mittek

Department of Electrical and Computer Engineering: Dissertations, Theses, and Student Research

The goal of Multiple Object Tracking (MOT) is to locate multiple objects and keep track of their individual identities and trajectories given a sequence of (video) frames. A popular approach to MOT is tracking by detection consisting of two processing components: detection (identification of objects of interest in individual frames) and data association (connecting data from multiple frames). This work addresses the detection component by introducing a method based on semantic instance segmentation, i.e., assigning labels to all visible pixels such that they are unique among different instances. Modern tracking methods often built around Convolutional Neural Networks (CNNs) and additional, …

The Stability Analysis For Wind Turbines With Doubly Fed Induction Generators, Baohua Dong

Department of Electrical and Computer Engineering: Dissertations, Theses, and Student Research

The quickly increasing, widespread use of wind generation around the world reduces carbon emissions, decreases the effects of global warming, and lowers dependence on fossil fuels. However, the growing penetration of wind power requires more effort to maintain power systems stability.

This dissertation focuses on developing a novel algorithm which dynamically optimizes the proportional-integral (PI) controllers of a doubly fed induction generator (DFIG) driven by a wind turbine to increase the transient performance based on small signal stability analysis.

Firstly, the impact of wind generation is introduced. The stability of power systems with wind generation is described, including the different …

Cooperative Learning For The Consensus Of Multi-Agent Systems, Qishuai Liu

Department of Electrical and Computer Engineering: Dissertations, Theses, and Student Research

Due to a lot of attention for the multi-agent system in recent years, the consensus algorithm gained immense popularity for building fault-tolerant systems in system and control theory. Generally, the consensus algorithm drives the swarm of agents to work as a coherent group that can reach an agreement regarding a certain quantity of interest, which depends on the state of all agents themselves. The most common consensus algorithm is the average consensus, the final consensus value of which is equal to the average of the initial values. If we want the agents to find the best area of the particular …

Embedded System Design Of Robot Control Architectures For Unmanned Agricultural Ground Vehicles, Ryan Humphrey

Department of Electrical and Computer Engineering: Dissertations, Theses, and Student Research

Engineering technology has matured to the extent where accompanying methods for unmanned field management is now becoming a technologically achievable and economically viable solution to agricultural tasks that have been traditionally performed by humans or human operated machines. Additionally, the rapidly increasing world population and the daunting burden it places on farmers in regards to the food production and crop yield demands, only makes such advancements in the agriculture industry all the more imperative. Consequently, the sector is beginning to observe a noticeable shift, where there exist a number of scalable infrastructural changes that are in the process of slowly …

Aerial Base Station Deployment For Post-Disaster Public Safety Applications, Jose Antonio Matamoros Vargas

Department of Electrical and Computer Engineering: Dissertations, Theses, and Student Research

Earthquakes and floods are constant threats to most of the countries in the world. After such catastrophes, a rapid response is needed, which includes communications not only for first responders but also for local civilians. Even though there are technologies and specialized personnel for rapid deployment, it is common that external factors will hinder the arrival of help while communication requirements are urgently required. Such communication technologies would aid tasks regarding organization and information dissemination from authorities to the civilians and vice-versa. This necessity is due to protocols and applications to allocate the number of emergency resources per location and …

Analysis Of Local Anti-Islanding Detection Methods For Photovoltaic Generators In Distribution Systems, Milad Kahrobaee

Department of Electrical and Computer Engineering: Dissertations, Theses, and Student Research

In the current decade, technology innovations and cost reduction of inverter-based Distributed Energy Resources (DERs) have led to higher integration of distributed energy storage and photovoltaic (PV) solar power systems. Increasing growth in PV penetration to the distribution system can raise operational and safety concerns especially in case of an unintended islanding.

In general, standards require distributed generators (DGs) to detect islanding from the main grid and cease to energize the local system. Multiple methods have been introduced in the literature to detect these islands reliably and quickly. In order to connect an inverter to distribution system, inverter should pass …

Effects Of Correlation Of Channel Gains On The Secrecy Capacity In The Gaussian Wiretap Channel, Abhishek Lokur

Department of Electrical and Computer Engineering: Dissertations, Theses, and Student Research

Secrecy capacity is one of the most important characteristic of a wireless communication channel. Therefore, the study of this characteristic wherein the system has correlated channel gains and study them for different line-of-sight (LOS) propagation scenarios is of ultimate importance.

The primary objective of this thesis from the mathematical side is to determine the secrecy capacity (SC) for correlated channel gains for the main and eavesdropper channels in a Gaussian Wiretap channel as a function from main parameters (μ, Σ, ρ). f(h₁, h₂) is the joint distribution of the two channel gains at channel use (h …

Design And Analysis Of Binary Driven Coherent M-Ary Qam Transmitter For Next Generation Optical Networks, Naji Albakay

Department of Electrical and Computer Engineering: Dissertations, Theses, and Student Research

This work presents a design for a binary driven optical square M-ary quadrature amplitude modulation (QAM) transmitter for high speed optical networks. The transmitter applies tandem quadrature phase shift keying (QPSK) modulators to eliminate the need for linear broadband amplifiers and high-resolution digital to analog converters (DACs), which are both required by conventional transmitters. The transmitter design could be scaled to any order of square M-ary QAM by simply adding more QPSK modulators in tandem. It also provides a Gray coded symbol constellation, insuring the lowest bit error rate possible during symbol recovery. We also provide the design for the …

Asic Design To Support Low Power High Voltage Power Supply For Radiation Monitoring Applications, Daniel Rogge

Department of Electrical and Computer Engineering: Dissertations, Theses, and Student Research

A low power high voltage power supply is designed for use in a long duration radiation monitoring system. The supply employs a flexible pulse frequency modulation switching controller implemented in a 0.35 $\mu$m CMOS technology. The controller drives and regulates a flyback transformer driven 12-stage Cockroft-Walton voltage multiplier chain. The chain provides bias for the dynodes of a photomultiplier tube. The supply voltage is selectable via a 12-bit on-chip digital to analog converter. The system is designed for low power operation and immunity to supply voltage variation as the application is battery-powered.

Advisors: Sina Balkir and Michael W. Hoffman

Using Low Power 5g Iot Devices Off-Network Utilizing Modified Prose Communication, John Aaron Swarner

Department of Electrical and Computer Engineering: Dissertations, Theses, and Student Research

In setups to enable IoT devices, high power radios are required in each of the devices separately. In order to reduce the power requirements for each individual device, a lower power radio could be used in order to reduce the total power requirements and size for the device and increase battery life or reduce power draws for each device. To enable this, a small change removing the application server requirements would be required. A mesh network could be used to enable communication to the main network, either to a tower that is within the range or through a larger relay …

Micron/Nano Structure Creation Through Dual Pulse Femtosecond Laser Surface Processing, Nicholas Roth

Department of Electrical and Computer Engineering: Dissertations, Theses, and Student Research

A new technique has been developed for creating multiscale micro/nanoscale surfaces on metals. This technique is based on past work in femtosecond laser surface processing (FLSP) and dual pulse laser induced breakdown spectroscopy (LIBS). Using a femtosecond laser, pulse pairs were created with varying pulse separations between 0 ps to 500 ps. The creation of surface structures with dual pulse FLSP was studied on Ag, Cu, Ti, Al, Ni, and 304 stainless steel in relation to pulse separation.

Using dual pulse FLSP micro/nano structures have been created for the first time on silver. The silver structures are multiscale in nature …

Cmos Radioactive Isotope Identification With Multichannel Analyzer And Embedded Neural Network, Samuel Murray

Department of Electrical and Computer Engineering: Dissertations, Theses, and Student Research

A radiation detection and identification system is designed and implemented to perform gamma ray spectroscopy on radioactive sources and identify which isotopes are present in the sources. A multichannel analyzer is implemented on an ASIC to process the signal produced from gamma rays detected by a scintillator and photomultiplier tube and to quantize the gamma ray energies to build a histogram. A fast, low memory embedded neural network is implemented on a microcontroller ASIC to identify the isotopes present in the gamma ray histogram produced by the multichannel analyzer in real time.

Advisors: Sina Balkir and Michael W. Hoffman

Multiuser Coding And Signal Processing In A Low Power Sensor Network, Dongqi Lai

Department of Electrical and Computer Engineering: Dissertations, Theses, and Student Research

Backscatter communication system is a wireless communication system that is used by both academic community and industry circles in recent years. This communication system only requires ultra-low power usage and simple design of the sensors. This project is using backscatter communication system to transmit data with backscatter tags. The method we used is semi-passive backscatter communication. This project focuses on transmitting signals with multiple sensors so there is a problem about distinguishing the signal reflected by different nodes. We modulated the transmitting digital signal with Walsh function to solve the problem of separating the signals between different nodes. By using …

Implementation Of Vision Processing Tasks On A Smart Camera Platform Using Neighborhood Processors, Dingyi Hong

Department of Electrical and Computer Engineering: Dissertations, Theses, and Student Research

Two applications of vision processing on a smart camera platform using neighborhood processors are presented. A smart camera application of real-time trajectory calculation for tracking objects and predicting their path of motion by using a single intelligent camera or a dual camera system are designed, simulated and implemented. Another application of object recognition with a key points algorithm for detecting simple shaped objects and locating the camera position within a 3-D coordinate system via imaging by using artificial neural network is applied to provide quick and accurate processing on a neighborhood-level parallel processor or other limited vision chip. For all …

Design Of A Distributed Real-Time E-Health Cyber Ecosystem With Collective Actions: Diagnosis, Dynamic Queueing, And Decision Making, Yanlin Zhou

Department of Electrical and Computer Engineering: Dissertations, Theses, and Student Research

In this thesis, we develop a framework for E-health Cyber Ecosystems, and look into different involved actors. The three interested parties in the ecosystem including patients, doctors, and healthcare providers are discussed in 3 different phases. In Phase 1, machine-learning based modeling and simulation analysis is performed to remotely predict a patient's risk level of having heart diseases in real time. In Phase 2, an online dynamic queueing model is devised to pair doctors with patients having high risk levels (diagnosed in Phase 1) to confirm the risk, and provide help. In Phase 3, a decision making paradigm is proposed …

Real-Time Streaming Video And Image Processing On Inexpensive Hardware With Low Latency, Richard L. Gregg

Department of Electrical and Computer Engineering: Dissertations, Theses, and Student Research

The use of resource constrained inexpensive hardware places restrictions on the design of streaming video and image processing system performance. In order to achieve acceptable frame-per-second (fps) performance with low latency, it is important to understand the response time requirements that the system needs to meet. For humans to be able to process and react to an image there should not be more than a 100ms delay between the time a camera captures an image and subsequently displays that image to the user.

In order to accomplish this goal, several design considerations need to be taken into account that limit …

Anti-Icing Properties Of Femtosecond Laser Surface Processed Material, Ryan James Bell

Department of Electrical and Computer Engineering: Dissertations, Theses, and Student Research

In this thesis, the use of femtosecond laser surface processing (FLSP) to enhance the anti-icing properties of a commonly used aircraft alloy, Al 7075-O Clad is described. By changing the surface morphology through FLSP and the surface chemistry through siloxane vapor deposition, the wettability of Al 7075-O Clad was altered.

Condensation and the subsequent freezing of condensates on FLSP Al 7075-O Clad was studied. Both structure height and surface wettability were shown to play a role in the delay of freezing. Freezing occurred on the FLSP superhydrophilic surface faster than on the unprocessed Al 7075-O Clad surface, however, freezing was …

Condensation And Subsequent Freezing Delays As A Result Of Using A Femtosecond Laser Functionalized Surface, Chongji Huang

Department of Electrical and Computer Engineering: Dissertations, Theses, and Student Research

Femtosecond laser surface processing (FLSP) enhances the anti-icing properties of a commonly used aircraft alloy, Al 7075-O Clad. The wettability of Al 7075-O Clad was altered by changing the surface morphology through FLSP and the surface chemistry through siloxane vapor deposition. Tall mound and short mound FLSP functionalized surfaces were created through two sets of laser parameters. Atmospheric condensation and subsequent freezing of condensates on FLSP Al 7075-O Clad was studied. Results indicate that both structure height and surface wettability play a role in the delay of freezing. Freezing occurred on the FLSP superhydrophilic surface faster than on a unprocessed …

Generalized Ellipsometry On Complex Nanostructures And Low-Symmetry Materials, Alyssa Mock

Department of Electrical and Computer Engineering: Dissertations, Theses, and Student Research

In this thesis, complex anisotropic materials are investigated and characterized by generalized ellipsometry. In recent years, anisotropic materials have gained considerable interest for novel applications in electronic and optoelectronic devices, mostly due to unique properties that originate from reduced crystal symmetry. Examples include white solid-state lighting devices which have become ubiquitous just recently, and the emergence of high-power, high-voltage electronic transistors and switches in all-electric vehicles. The incorporation of single crystalline material with low crystal symmetry into novel device structures requires reconsideration of existing optical characterization approaches. Here, the generalized ellipsometry concept is extended to include applications for materials with …

Application-Aware Cognitive Multi-Hop Wireless Networking Testbed And Experiments, Trenton T. Evans

Department of Electrical and Computer Engineering: Dissertations, Theses, and Student Research

In this thesis, we present a new architecture for application-aware cognitive multihop wireless networks (AC-MWN) with testbed implementations and experiments. Cognitive radio is a technique to adaptively use the spectrum so that the resource can be used more efficiently in a low cost way. Multihop wireless networks can be deployed quickly and flexibly without a fixed infrastructure. In presented new architecture, we study backbone routing schemes with network cognition, routing scheme with network coding and spectrum adaptation. A testbed is implemented to test the schemes for AC-MWN. In addition to basic measurements, we implement a video streaming application based on …

Project Halon: Engaging Secondary Students In High-Altitude Ballooning Experiments, James M. Taylor Jr., Derrick A. Nero

Department of Electrical and Computer Engineering: Dissertations, Theses, and Student Research

Project HALON Overview

•Fewer US STEM graduates

•Shortage of STEM educators

•Lack of engaging, high quality STEM material in the classroom

•Potentially results in lower global economic competitiveness

Experiment Constraints

•Project brings together STEM major mentors and educators

•Builds understanding of research and operational challenges

•Students get excited about more complex experiments (CubeSATs)

HALON: High Altitude Learning Over Nebraska

•High altitude balloon lift platform

•Student-designed experiments tailored to student team abilities

•NASA-inspired near-space systems engineering process for tradeoffs

•Engagement / mentoring for pre-service and in-service educators

Physiologically-Aware Communication Architecture For Transmission Of Biomedical Signals In Basns For Emerging Iot Applications, Jose Santos, Dongming Peng, Hamid Sharif

Department of Electrical and Computer Engineering: Dissertations, Theses, and Student Research

This research work proposes a novel physiologicallyaware communication architecture for the transmission of biomedical signals in BASNs (Body Area Sensor Networks) and wearables for emerging IoT applications. The architecture to fulfill the following objectives:

• Reduce volume of biomedical data in IoT networks and Internet infrastructure.

• Minimize the required computational load of biomedical data on the cloud side.

• Extend the lifetime of the mobile wearable/BASN through improved energy savings.

This architecture is generalizable to class of biomedical signals. It prevents large volume of biomedical data to be generated; uses patient state to control almost any system parameter; achieves …

Reducing Graphene–Metal Contact Resistance Via Laser Nano-Welding, Kamran Keramatnejad, H. Rabiee Golgir, Y. S. Zhou, D. W. Li, X. Huang, Yongfeng Lu

Department of Electrical and Computer Engineering: Dissertations, Theses, and Student Research

The large graphene-metal contact resistance is a major limitation for development of graphene electronics. graphene behaves as an insulator for out-of-plane carrier transport to metallic contacts.

Laser nano-welding was developed and led to RC reductions of up to 84%.

Localized laser irradiation at the edges of graphene led to the formation of chemically active point defects.

Precise structural modifications and formation of G-M bonding led to improved carrier efficiency in graphene devices.

Skin Effect Suppression In Infrared-Laser Irradiated Planar Multi-Walled Carbon Nanotube/Cu Conductors, Kamran Keramatnejad, Yang Gao, Yunshen Zhou, Hossein Rabiee Glogir, Mengmeng Wang, Yongfeng Lu

Department of Electrical and Computer Engineering: Dissertations, Theses, and Student Research

Skin effect suppression in planar multi-walled carbon nanotube (MWCNT)/Copper (Cu) conductors was realized at the 0-10 MHz frequency range through infrared laser irradiation of MWCNTs, which were coated on the surface of the Cu substrate via the electrophoretic deposition (EPD) method. The effect of laser irradiation and its power density on electrical and structural properties of the MWCNT/Cu conductors was investigated using a wavelength-tunable CO2 laser and then comparing the performance of the samples prepared at different conditions with that of pristine Cu. The irradiation at λ=9.219 μm proved to be effective in selective delivery of energy towards depths close …

Generalized Ellipsometry Analysis Of Anisotropic Nanoporous Media: Polymer-Infiltrated Nanocolumnar And Inverse-Column Polymeric Films, Dan Liang

Department of Electrical and Computer Engineering: Dissertations, Theses, and Student Research

Characterization of the structural and optical properties is a subject of significance for nanoporous material research. However, it remains a challenge to find non-destructive methods for investigating the anisotropy of porous thin films with three-dimensional nanostructures. In this thesis, a generalized ellipsometry (GE) analysis approach is employed to study two types of anisotropic nanoporous media: slanted columnar thin films (SCTFs) with polymer infiltration and inverse-SCTF polymeric films. The thesis presents the physical properties obtained from GE analysis, including porosity, columnar shape, principal optical constants, birefringence, etc.

The thesis reports on using a GE analysis approach, combining the homogeneous biaxial layer …