Open Access. Powered by Scholars. Published by Universities.®

Electromagnetics and Photonics Commons™

Open Access. Powered by Scholars. Published by Universities.®

2014

Discipline
Institution
Keyword
Publication
Publication Type

Articles 61 - 90 of 92

Full-Text Articles in Electromagnetics and Photonics

Nonlinear Integrated Photonics On Silicon And Gallium Arsenide Substrates, Jichi Ma Jan 2014

Nonlinear Integrated Photonics On Silicon And Gallium Arsenide Substrates, Jichi Ma

Electronic Theses and Dissertations

Silicon photonics is nowadays a mature technology and is on the verge of becoming a blossoming industry. Silicon photonics has also been pursued as a platform for integrated nonlinear optics based on Raman and Kerr effects. In recent years, more futuristic directions have been pursued by various groups. For instance, the realm of silicon photonics has been expanded beyond the well-established near-infrared wavelengths and into the mid-infrared (3 - 5 µm). In this wavelength range, the omnipresent hurdle of nonlinear silicon photonics in the telecommunication band, i.e., nonlinear losses due to two-photon absorption, is inherently nonexistent. With the lack of …

Go to article

Specialty Fiber Lasers And Novel Fiber Devices, Clemence Jollivet Jan 2014

Specialty Fiber Lasers And Novel Fiber Devices, Clemence Jollivet

Electronic Theses and Dissertations

At the Dawn of the 21st century, the field of specialty optical fibers experienced a scientific revolution with the introduction of the stack-and-draw technique, a multi-steps and advanced fiber fabrication method, which enabled the creation of well-controlled micro-structured designs. Since then, an extremely wide variety of finely tuned fiber structures have been demonstrated including novel materials and novel designs. As the complexity of the fiber design increased, highly-controlled fabrication processes became critical. To determine the ability of a novel fiber design to deliver light with properties tailored according to a specific application, several mode analysis techniques were reported, addressing the …

Go to article

Lp Fiber Mode Converters Using Holographic Phase Mask In Photo-Thermo-Refractive Glass, Aniket Patil Jan 2014

Lp Fiber Mode Converters Using Holographic Phase Mask In Photo-Thermo-Refractive Glass, Aniket Patil

Electronic Theses and Dissertations

In this study, an investigation was undertaken to research the use of holographic phase masks (HPMs) in photo-thermo-refractive (PTR) glass as mode converters for linearly polarized (LP) fiber modes. A Spatial Light Modulator (SLM) was used to generate higher-order transverse fiber modes LPm,n. Under proper incidence condition on the holographic device, LPm,n modes are diffracted and simultaneously converted into higher order or lower order LP modes. The process was analyzed by imaging the far field on a CCD camera. It is demonstrated that using this novel method of converting transverse fiber modes several combinations of LP modes can be converted …

Go to article

Advanced Liquid Crystal Materials For Display And Photonic Applications, Yuan Chen Jan 2014

Advanced Liquid Crystal Materials For Display And Photonic Applications, Yuan Chen

Electronic Theses and Dissertations

Thin-film-transistor (TFT) liquid crystal display (LCD) has been widely used in smartphones, pads, laptops, computer monitors, and large screen televisions, just to name a few. A great deal of effort has been delved into wide viewing angle, high resolution, low power consumption, and vivid color. However, relatively slow response time and low transmittance remain as technical challenges. To improve response time, several approaches have been developed, such as low viscosity liquid crystals, overdrive and undershoot voltage schemes, thin cell gap with a high birefringence liquid crystal, and elevated temperature operation. The state-of-the-art gray-to-gray response time of a nematic LC device …

Go to article

Generation And Characterization Of Sub-70 Isolated Attosecond Pulses, Qi Zhang Jan 2014

Generation And Characterization Of Sub-70 Isolated Attosecond Pulses, Qi Zhang

Electronic Theses and Dissertations

Dynamics occurring on microscopic scales, such as electronic motion inside atoms and molecules, are governed by quantum mechanics. However, the Schroedinger equation is usually too complicated to solve analytically for systems other than the hydrogen atom. Even for some simple atoms such as helium, it still takes months to do a full numerical analysis. Therefore, practical problems are often solved only after simplification. The results are then compared with the experimental outcome in both the spectral and temporal domain. For accurate experimental comparison, temporal resolution on the attosecond scale is required. This had not been achieved until the first demonstration …

Go to article

High Performance Three-Dimensional Display Based On Polymer-Stabilized Blue Phase Liquid Crystal, Yifan Liu Jan 2014

High Performance Three-Dimensional Display Based On Polymer-Stabilized Blue Phase Liquid Crystal, Yifan Liu

Electronic Theses and Dissertations

Autostereoscopic 2D/3D (two-dimension/three-dimension) switchable display has been attracting great interest in research and practical applications for several years. Among different autostereoscopic solutions, direction-multiplexed 3D displays based on microlens array or parallax barrier are viewed as the most promising candidates, due to their compatibility with conventional 2D display technologies. These 2D/3D switchable display system designs rely on fast switching display panels and photonics devices, including adaptive focus microlens array and switchable slit array. Polymer-stabilized blue phase liquid crystal (PS-BPLC) material provides a possible solution to meet the aforementioned fast response time requirement. However, present display and photonic devices based on blue …

Go to article

Holographic Recording And Applications Of Multiplexed Volume Bragg Gratings In Photo-Thermo-Refractive Glass, Daniel Ott Jan 2014

Holographic Recording And Applications Of Multiplexed Volume Bragg Gratings In Photo-Thermo-Refractive Glass, Daniel Ott

Electronic Theses and Dissertations

Recent developments in holographic recording of volume Bragg gratings (VBGs) in photo-thermo-refractive (PTR) glass have demonstrated their utility as components in high power laser systems for spectral narrowing, transverse mode control, beam combining, and pulse stretching/compression. VBG structures are capable of diffracting incident light into a single diffraction order with high efficiency given the Bragg condition is met. The Bragg condition depends on both the wavelength and angle of the incident light making VBGs useful for filtering and manipulating both the wavelength and angular spectrum of a source. This dissertation expands upon previous research in PTR VBGs by investigating multiplexed …

Go to article

Entangled Photon Pairs In Disordered Photonic Lattices, Lane Martin Jan 2014

Entangled Photon Pairs In Disordered Photonic Lattices, Lane Martin

Electronic Theses and Dissertations

Photonic lattices consisting of arrays of evanescently coupled waveguides fabricated with precisely controlled parameters have enabled the study of discrete optical phenomena, both classical and quantum, and the simulation of other physical phenomena governed by the same dynamics. In this dissertation, I have experimentally demonstrated transverse Anderson localization of classical light in arrays with off-diagonal coupling disorder and investigated theoretically and experimentally the propagation of entangled photon pairs through such disordered systems. I discovered a new phenomenon, Anderson co-localization, in which a spatially entangled photon pair in a correlated transversally extended state localizes in the correlation space, though neither photon …

Go to article

Translation Of 'Seasons Of Life: A Panoramic Selection Of Songs By Rabindranath Tagore', Monish Ranjan Chatterjee Jan 2014

Translation Of 'Seasons Of Life: A Panoramic Selection Of Songs By Rabindranath Tagore', Monish Ranjan Chatterjee

Electrical and Computer Engineering Faculty Publications

No abstract provided.

Go to article

Shielding Effectiveness (Se) Measurement For Maxair Waveguide Panel, Lossy Material Evaluation By Laptop Application, Xiao Li Jan 2014

Shielding Effectiveness (Se) Measurement For Maxair Waveguide Panel, Lossy Material Evaluation By Laptop Application, Xiao Li

Masters Theses

"The first part of the thesis presents the EM shielding effectiveness (SE) measurement of new kind of waveguide panel, MaxAir, which based on metal coating technology. SE Measurement tell the SE performance of MaxAir compared to the traditional metal waveguide panel. In terms of good features such as lower price, less weight, MaxAir could replace traditional waveguide panel in some applications by its SE results. There are two SE measurement methods are performed for MaxAir panel, both of them based on reverberation chamber. Measured SE for several MaxAir panel samples in different cell dimension and coating configuration. By the Measured …

Go to article

Cable Discharge Events (Cde) -- A Modeling And Simulation Perspective, Viswa Pilla Jan 2014

Cable Discharge Events (Cde) -- A Modeling And Simulation Perspective, Viswa Pilla

Masters Theses

"Cable discharge events (CDE) typically occur when a charged cable is connected to an electronic device. Several CDE damages in Ethernet LAN and USB communication interface equipment are reported by the IC manufacturers. CDE differs from other types of ESD such as human body model (HBM), charged device model (CDM) and IEC 61000-4-2 mainly due to faster rise times, longer pulse widths and higher peak currents. Various factors such as cable geometries, charging and discharging mechanisms, and load conditions influence CDE. Several researchers have developed some measurement techniques to understand CDE waveforms. However, there is little information regarding its modeling …

Go to article

A Complex-Envelope Fdtd Formulation Using Real-Valued Field-Variables, Qi Liu Jan 2014

A Complex-Envelope Fdtd Formulation Using Real-Valued Field-Variables, Qi Liu

Electronic Theses and Dissertations

Use of the complex-envelope (CE) representation of band-pass limited sources and their resulting fields increases the allowable time-step in finite-difference time-domain (FDTD) simulations. The complex envelope representation transforms band-pass limited fields and sources to complex-valued low-pass limited form and Maxwells equations from real-valued partial differential equations (PDEs) to complex-valued PDEs. Previous CE FDTD schemes have used complex valued difference equations in terms of complex valued field quantities to approximate these complex PDEs. This choice requires the use of complex numbers and complex operations in the computer program implementing the solution. An alternative CE FDTD scheme using only real numbers and …

Go to article

Multifunctional, Multimaterial Particle Fabrication Via An In-Fiber Fluid Instability, Joshua Kaufman Jan 2014

Multifunctional, Multimaterial Particle Fabrication Via An In-Fiber Fluid Instability, Joshua Kaufman

Electronic Theses and Dissertations

Spherical micro- and nano-particles have found widespread use in many various applications from paint to cosmetics to medicine. Due to the multiplicity of desired particle material(s), structure, size range, and functionality, many approaches exist for generating such particles. Bottom-up methods such as chemical synthesis have a high yield and work with a wide range of materials; however, these processes typically lead to large polydispersity and cannot produce structured particles. Top-down approaches such as microfluidics overcome the polydispersity issue and may produce a few different structures in particles, but at lower rates and only at the micro-scale. A method that can …

Go to article

3d Printed Spatially Variant Metamaterials, Cesar Roman Garcia Jan 2014

3d Printed Spatially Variant Metamaterials, Cesar Roman Garcia

Open Access Theses & Dissertations

The recent advancement in 3D printing has created a new way to design electronics and electromagnetic devices. This allows for a new breed of non-planar designs to be used, fully exploiting all three dimensions like never before. More functions can be fit into the same amount of space, products with novel form factors can be more easily manufactured, interconnects can be routed more smoothly, interfaces can be better implemented, electrical and mechanical functions can be comingled, and entirely new device paradigms will be invented. When departing from traditional planar topologies many new problems arise like signal integrity, crosstalk, noise, and …

Go to article

Digitally Manufactured Spatially Variant Photonic Crystals, Javier Jair Pazos Jan 2014

Digitally Manufactured Spatially Variant Photonic Crystals, Javier Jair Pazos

Open Access Theses & Dissertations

Metamaterials and photonic crystals are engineered composites that exhibit electromagnetic properties superior to those found in nature. They have been shown to produce novel and useful phenomena that allow extraordinary control over the electromagnetic field. One of these phenomena is self-collimation, an effect observed in photonic crystals in which a beam of light propagates without diffraction and is forced to flow in the direction of the crystal. Self-collimation however, like many of the mechanisms enabled through dispersion engineering, is effective in directions only along the principal axes of the lattice. To this effect, a general purpose synThesis procedure was developed …

Go to article

Photonic Filtering For Applications In Microwave Generation And Metrology, Marcus Bagnell Jan 2014

Photonic Filtering For Applications In Microwave Generation And Metrology, Marcus Bagnell

Electronic Theses and Dissertations

This work uses the photonic filtering properties of Fabry-Perot etalons to show improvements in the electrical signals created upon photodetection of the optical signal. First, a method of delay measurement is described which uses multi-heterodyne detection to find correlations in white light signals at 20 km of delay to sub millimeter resolution. By filtering incoming white light with a Fabry-Perot etalon, the pseudo periodic signal is suitable for measurement by combining and photodetecting it with an optical frequency comb. In this way, optical data from a large bandwidth can be downconverted and sampled on low frequency electronics. Second, a high …

Go to article

Parity-Time And Supersymmetry In Optics, Mohammad Ali Miri Jan 2014

Parity-Time And Supersymmetry In Optics, Mohammad Ali Miri

Electronic Theses and Dissertations

Symmetry plays a crucial role in exploring the laws of nature. By exploiting some of the underlying analogies between the mathematical formalism of quantum mechanics and that of electrodynamics, in this dissertation we show that optics can provide a fertile ground for studying, observing, and utilizing some of the peculiar symmetries that are currently out of reach in other areas of physics. In particular, in this work, we investigate two important classes of symmetries, parity-time symmetry (PT) and supersymmetry (SUSY), within the context of classical optics. The presence of PT symmetry can lead to entirely real spectra in non-Hermitian systems. …

Go to article

Reference Compensation For Localized Surface-Plasmon Resonance Sensors, Neha Nehru Jan 2014

Reference Compensation For Localized Surface-Plasmon Resonance Sensors, Neha Nehru

Theses and Dissertations--Electrical and Computer Engineering

Noble metal nanoparticles supporting localized surface plasmon resonances (LSPR) have been extensively investigated for label free detection of various biological and chemical interactions. When compared to other optical sensing techniques, LSPR sensors offer label-free detection of biomolecular interactions in localized sensing volume solutions. However, these sensors also suffer from a major disadvantage – LSPR sensors remain highly susceptible to interference because they respond to both solution refractive index change and non-specific binding as well as specific binding of the target analyte. These interactions can severely compromise the measurement of the target analyte in a complex unknown media and hence limit …

Go to article

Error Control And Efficient Memory Management For Sparse Integral Equation Solvers Based On Local-Global Solution Modes, Jun-Shik Choi Jan 2014

Error Control And Efficient Memory Management For Sparse Integral Equation Solvers Based On Local-Global Solution Modes, Jun-Shik Choi

Theses and Dissertations--Electrical and Computer Engineering

This dissertation presents and analyzes two new algorithms for sparse direct solution methods based on the use of local-global solution (LOGOS) modes. One of the new algorithms is a rigorous error control strategy for LOGOS-based matrix factorizations that utilize overlapped, localizing modes (OL-LOGOS) on a shifted grid. The use of OL-LOGOS modes is critical to obtaining asymptotically efficient factorizations from LOGOS-based methods. Unfortunately, the approach also introduces a non-orthogonal basis function structure. This can cause errors to accumulate across levels of a multilevel implementation, which has previously posed a barrier to rigorous error control for the OL-LOGOS factorization method. This …

Go to article

A Multi-Physics Computational Approach To Simulating Thz Photoconductive Antennas With Comparison To Measured Data And Fabrication Of Samples, Darren Ray Boyd Jan 2014

A Multi-Physics Computational Approach To Simulating Thz Photoconductive Antennas With Comparison To Measured Data And Fabrication Of Samples, Darren Ray Boyd

Theses and Dissertations--Electrical and Computer Engineering

The frequency demands of radiating systems are moving into the terahertz band with potential applications that include sensing, imaging, and extremely broadband communication. One commonly used method for generating and detecting terahertz waves is to excite a voltage-biased photoconductive antenna with an extremely short laser pulse. The pulsed laser generates charge carriers in a photoconductive substrate which are swept onto the metallic antenna traces to produce an electric current that radiates or detects a terahertz band signal. Therefore, analysis of a photoconductive antenna requires simultaneous solutions of both semiconductor physics equations (including drift-diffusion and continuity relations) and Maxwell’s equations. A …

Go to article

Visible-Light Photocatalyzed Cross-Linking Of Diacetylene Ligands By Quantum Dots To Improve Their Aqueous Colloidal Stability, Marion G. Götz, Hiroko Takeuchi, Matthew J. Goldfogel, Julia M. Warren, Brandon D. Fennel, Colin D. Heyes Jan 2014

Visible-Light Photocatalyzed Cross-Linking Of Diacetylene Ligands By Quantum Dots To Improve Their Aqueous Colloidal Stability, Marion G. Götz, Hiroko Takeuchi, Matthew J. Goldfogel, Julia M. Warren, Brandon D. Fennel, Colin D. Heyes

Chemistry & Biochemistry Faculty Publications and Presentations

Ligand cross-linking is known to improve the colloidal stability of nanoparticles, particularly in aqueous solutions. However, most cross-linking is performed chemically, in which it is difficult to limit interparticle cross-linking, unless performed at low concentrations. Photochemical cross-linking is a promising approach but usually requires ultraviolet (UV) light to initiate. Using such high-energy photons can be harmful to systems in which the ligand–nanoparticle bond is fairly weak, as is the case for the commonly used semiconductor quantum dots (QDs). Here, we introduce a novel approach to cross-link thiolated ligands on QDs by utilizing the photocatalytic activity of QDs upon absorbing visible …

Go to article

High Resolution Time-Resolved Imaging System In The Vacuum Ultraviolet Region, Yuseong Jang Jan 2014

High Resolution Time-Resolved Imaging System In The Vacuum Ultraviolet Region, Yuseong Jang

Electronic Theses and Dissertations

High-power debris-free vacuum ultraviolet (VUV) light sources have applications in several scientific and engineering areas, such as high volume manufacturing lithography and inspection tools in the semiconductor industry, as well as other applications in material processing and photochemistry. For the past decades, the semiconductor industry has been driven by what is called "Moore's Law". The entire semiconductor industry relies on this rule, which requires chip makers to pack transistors more tightly with every new generation of chips, shrinking the size of transistors. The ability to solve roadmap challenges is, at least partly, proportional to our ability to measure them. The …

Go to article

Semiconductor Laser Based On Thermoelectrophotonics, Xiaohang Liu Jan 2014

Semiconductor Laser Based On Thermoelectrophotonics, Xiaohang Liu

Electronic Theses and Dissertations

This dissertation presents to our knowledge the first demonstration of a quantum well (QW) laser monolithically integrated with internal optical pump based on a light emitting diode (LED). The LED with high efficiency is operated in a thermoelectrophotonic (TEP) regime for which it can absorb both its own emitted light and heat. The LED optical pump can reduce internal optical loss in the QW laser, and enables monolithically integrated TEP heat pumps to the semiconductor laser. The design, growth and fabrication processes of the laser chip are discussed, and its experimental data is presented. In order to further increase the …

Go to article

Multimaterial Fibers In Photonics And Nanotechnology, Guangming Tao Jan 2014

Multimaterial Fibers In Photonics And Nanotechnology, Guangming Tao

Electronic Theses and Dissertations

Recent progress in combing multiple materials with distinct optical, electronic, and thermomechanical properties monolithically in a kilometer-long fiber drawn from a preform offers unique multifunctionality at a low cost. A wide range of unique in-fiber devices have been developed in fiber form-factor using this strategy. Here, I summary my recent results in this nascent field of 'multimaterial fibers'. I will focus on my achievements in producing robust infrared optical fibers and in appropriating optical fiber production technology for applications in nanofabrication. The development of optical components suitable for the infrared (IR) is crucial for applications in this spectral range to …

Go to article

Laser Filamentation - Beyond Self-Focusing And Plasma Defocusing, Khan Lim Jan 2014

Laser Filamentation - Beyond Self-Focusing And Plasma Defocusing, Khan Lim

Electronic Theses and Dissertations

Laser filamentation is a highly complex and dynamic nonlinear process that is sensitive to many physical parameters. The basic properties that define a filament consist of (i) a narrow, high intensity core that persists for distances much greater than the Rayleigh distance, (ii) a low density plasma channel existing within the filament core, and (iii) a supercontinuum generated over the course of filamentation. However, there remain many questions pertaining to how these basic properties are affected by changes in the conditions in which the filaments are formed; that is the premise of the work presented in this dissertation. To examine …

Go to article

Distribution Of Laser Induced Heating In Multi-Component Chalcogenide Glass And Its Associated Effects, Laura Sisken Jan 2014

Distribution Of Laser Induced Heating In Multi-Component Chalcogenide Glass And Its Associated Effects, Laura Sisken

Electronic Theses and Dissertations

Chalcogenide glasses are well known to have good transparency into the infrared spectrum. These glasses though tend to have low thresholds as compared to oxide glasses for photo-induced changes and thermally-induced changes. Material modification such as photo-induced darkening, bleaching, refractive index change, densification or expansion, ablation of crystallization have been demonstrated, and are typically induced by a thermal furnace-based heat treatment, an optical source such as a laser, or a combination of photo-thermal interactions. Solely employing laser-based heating has an advantage over a furnace, since one has the potential to be able to spatially modify the materials properties with much …

Go to article

Highly-Sensitive Stoichiometric Analysis Of Yag Ceramics Using Laser-Induced Breakdown Spectroscopy (Libs), Jahromi, Ali Kazemi Jan 2014

Highly-Sensitive Stoichiometric Analysis Of Yag Ceramics Using Laser-Induced Breakdown Spectroscopy (Libs), Jahromi, Ali Kazemi

Electronic Theses and Dissertations

Transparent ceramics are an important class of optical materials with applications in high-strength windows, radiation detectors and high-power lasers. Despite the many successful developments of the past decades, their challenging fabrication still needs to be perfected to achieve a better consistency in optical quality. In particular, ternary phase materials such as Yttrium Aluminum Garnet (YAG, Y3Al5O12), a long standing high-power laser host, require a precise control of stoichiometry, often beyond the precision of current analytical techniques, in order to reduce scattering losses and the presence of deleterious point defects. This work explores the potential of Laser-Induced Breakdown Spectroscopy (LIBS) for …

Go to article

Broad Bandwidth, All-Fiber, Thulium-Doped Photonic Crystal Fiber Amplifier For Potential Use In Scaling Ultrashort Pulse Peak Powers, Alex Sincore Jan 2014

Broad Bandwidth, All-Fiber, Thulium-Doped Photonic Crystal Fiber Amplifier For Potential Use In Scaling Ultrashort Pulse Peak Powers, Alex Sincore

Electronic Theses and Dissertations

Fiber based ultrashort pulse laser sources are desirable for many applications; however generating high peak powers in fiber lasers is primarily limited by the onset of nonlinear effects such as self-phase modulation, stimulated Raman scattering, and self-focusing. Increasing the fiber core diameter mitigates the onset of these nonlinear effects, but also allows unwanted higher-order transverse spatial modes to propagate. Both large core diameters and single-mode propagation can be simultaneously attained using photonic crystal fibers. Thulium-doped fiber lasers are attractive for high peak power ultrashort pulse systems. They offer a broad gain bandwidth, capable of amplifying sub-100 femtosecond pulses. The longer …

Go to article

Techniques For Characterization Of Third Order Optical Nonlinearities, Manuel Ferdinandus Jan 2014

Techniques For Characterization Of Third Order Optical Nonlinearities, Manuel Ferdinandus

Electronic Theses and Dissertations

This dissertation describes the development of novel techniques for characterization of nonlinear properties of materials. The dissertation is divided into two parts, a background and theory section and a technique development section. In the background and theory section we explain the origins of the nonlinear optical response of materials across many different spatial and temporal scales. The mechanisms that we are most interested in are the electronic nuclear and reorientational responses, which occur on the range of sub-femtosecond to several picoseconds. The electronic mechanism is due to the electrons of a material experiencing a non-parabolic potential well due a strong …

Go to article

Multimaterial Fibers And Tapers A Platform For Nonlinear Photonics And Nanotechnology, Soroush Shabahang Jan 2014

Multimaterial Fibers And Tapers A Platform For Nonlinear Photonics And Nanotechnology, Soroush Shabahang

Electronic Theses and Dissertations

The development of optical sources and components suitable for the mid-infrared is crucial for applications in this spectral range to reach the maturity level of their counterparts in the visible and near-infrared spectral regimes. The recent commercialization of quantum cascade lasers is leading to further interest in this spectral range. Wideband mid-infrared coherent sources, such as supercontinuum generation, have yet to be fully developed. A mid-infrared supercontinuum source would allow for unique applications in spectroscopy and sensing. Over the last decade, it has been shown that high-index confinement in highly nonlinear fibers pumped with high-peak-power pulses is an excellent approach …

Go to article

First Prev Next Last