Electrical and Electronics Commons^™

A High Performance Software Intensive Testbed For Rapid Prototyping And Controlled Testing Of Lte And Wi-Fi Radio Frequency Signals, Mirza Mohammad Maqbule Elahi

Open Access Theses & Dissertations

Long Term Evolution or LTE has gained interest for new applications that can benefit society including mobile broadband services like 802.11 or Wi-Fi. Both LTE and Wi-Fi uses similar modulation technique Orthogonal Frequency Division Multiplexing or OFDM. 6GHz sub carrier bands are crowded with LTE users. As wireless communications technology continues to develop, LTE technology in unlicensed bands (LTE-U) is a viable solution to the lack of spectrum resources. The competition between LTE-U and Wi-Fi will seriously impair their communication quality, so the friendly coexistence of both become an important research topic. This paper discusses the use of a software-defined …

An Unmanned Surface Vehicle: Autonomous Sensor Integration System For Bathymetric Surveys, Fernando Sotelo Torres

Open Access Theses & Dissertations

Unmanned Surface Vehicles (USVs) have been applied to earth sciences, with only a few studies conducted in water environments, as these systems provide autonomous measurement capabilities and transferability to other environmental settings. In this thesis, a reliable, yet economical, USV has been developed for bathymetric surveying of lakes. The system combines an autonomous navigation framework, environmental sensors and a multibeam echosounder to collect submerged topography, temperature, windspeed and monitor the vehicle status during prescribed path planning missions.

The main objective of this study is to provide a methodological framework to build a USV, with independent decision-making, efficient control, and long-range …

Evaluation Of Single Phase Smart Pv Inverter Functions In Unbalanced Residential Distribution Systems, Darren Symonette

Graduate Theses and Dissertations

In the United States, smart PV inverters integrated with residential distribution systems are becoming a more common occurrence. With integration of smart PV inverters, power utilities are experiencing an increase of number of operations with regards to switched capacitor banks, voltage regulators and on load tap changers. These increases can lead to excess wear and tear on the devices causing power utilities to perform unwanted replacement and maintenance. However, smart PV inverters when controlled under specific functions can enable these inverters to provide reactive power and voltage control which in turn lowers the number of operations for switched capacitor banks, …

Controller Platform Design And Demonstration For An Electric Aircraft Propulsion Driv, Rosten Sweeting

Graduate Theses and Dissertations

With the growth in the aerospace industry there has been a trend to optimize the performance of an aircraft by reducing fuel consumption and operational cost. Recent advancements in the field of power electronics have pushed towards the concepts of hybrid electric aircraft also known as more electrical aircrafts. In this work, a custom controller board for an electric aircraft propulsion drive was designed to drive a permanent magnet synchronous motor. Design of the controller board required knowledge of the topology selection and power module selections. Simulations of the system were performed using MATLAB/Simulink to analyze the overall performance of …

Study Of Thin Gan/Ingan/Gan Double Graded Structures For Future Photovoltaic Application, Mirsaeid Sarollahi

Graduate Theses and Dissertations

Indium gallium nitride (In_x Ga_(1-x) N) materials have displayed great potential for photovoltaic and optoelectronic devices due to their optical and electrical properties. Properties such as direct bandgap, strong bandgap absorption, thermal stability and high radiation resistance qualify them as great materials for photovoltaic devices. The tunable bandgap which absorbs the whole solar spectrum is the most significant feature which became attractive for scientists. The bandgap for these materials varies from 0.7 eV for InN to 3.4 eV for GaN covering from infrared to ultraviolet. In_x Ga_(1-x) N wurtzite crystal is grown on GaN buffer layer by Molecular Beam Epitaxy …

Reduced Fuel Emissions Through Connected Vehicles And Truck Platooning, Paul D. Brummitt

Electronic Theses and Dissertations

Vehicle-to-infrastructure (V2I) and vehicle-to-vehicle (V2V) communication enable the sharing, in real time, of vehicular locations and speeds with other vehicles, traffic signals, and traffic control centers. This shared information can help traffic to better traverse intersections, road segments, and congested neighborhoods, thereby reducing travel times, increasing driver safety, generating data for traffic planning, and reducing vehicular pollution. This study, which focuses on vehicular pollution, used an analysis of data from NREL, BTS, and the EPA to determine that the widespread use of V2V-based truck platooning—the convoying of trucks in close proximity to one another so as to reduce air drag …

An Evaluation Of Wi-Fi 802.11b Backscatter, Anthony Chen

All Theses

Internet of Things (IoT) devices are in need of low-power communications systems with longevity and reliability. With the use of backscatter technology, IoT devices can communicate at the cost of almost no power and can last for up to a decade. Furthermore, backscatter technology is compatible with everyday wireless signals such as Wi-Fi and Bluetooth, allowing for easy communication without specific hardware constraints. This thesis aims to evaluate a Wi-Fi backscatter system and analyze its ease in triggering off of such ambient signals and sources. The system will utilize Wi-Fi 802.11b as a backscatter source to trigger the backscatter system …

Miniaturized Battery Powered Air Quality Monitoring System, Bryan Chacon

All Theses

In this work, an air quality monitoring system was developed using various sensors that measure specific air quality parameters, including Volatile Organic Compounds, Carbon Dioxide, particulate matter of varying sizes, ambient pressure, humidity, and temperature. This system is based off a Particle micro-controller, Boron LTE CAT-M1 which allows for cellular connectivity for real-time data transmission. It is powered by a 3.7 Volt Li-Po battery and has a miniaturized design which allows for portability. This data is processed through an Internet of Things software provider that allows for the device to be connected and accessed to and from anywhere in the …

Sub-Bandgap Photon-Assisted Electron Trapping And Detrapping In Algan/Gan Heterostructure Field-Effect Transistors, Andrew Gunn

All Theses

We have investigated photon-assisted trapping and detrapping of electrons injected from the gate under negative bias in a heterostructure field-effect transistor (HFET). The electron injection rate from the gate was found to be dramatically affected by sub-bandgap laser illumination. The trapped electrons reduced the two-dimensional electron gas (2DEG) density at the AlGaN/GaN heterointerface but could also be emitted from their trap states by sub-bandgap photons, leading to a recovery of 2DEG density. The trapping and detrapping dynamics were found to be strongly dependent on the wavelength and focal position of the laser, as well as the gate bias stress time …

Load-Adjusted Prediction For Proactive Resource Management And Video Server Demand Profiling, Obinna Izima, Ruairí De Fréin

Articles

To lower costs associated with providing cloud resources, a network manager would like to estimate how busy the servers will be in the near future. This is a necessary input in deciding whether to scale up or down computing requirements. We formulate the problem of estimating cloud computational requirements as an integrated framework comprising of a learning and an action stage. In the learning stage, we use Machine Learning (ML) models to predict the video Quality of Delivery (QoD) metric for cloud-hosted servers and use the knowledge gained from the process to make resource management decisions during the action stage. …

Machine Learning Approach For Classifying Power Outage In Secondary Electric Distribution Network, Stephan Mgaya, Hellen Maziku

Tanzania Journal of Engineering and Technology (TJET)

Power outage is the problem that hinders social and economic development especially for developing countries like Tanzania. Frequent power outages damage electric equipment, and negatively affect the industrial production process. Power outages cannot be completely eradicated due to uncontrolled cause like natural calamities but technical challenges can be managed and hence reducing power outages. The existing manual methods used to locate power outage like customer calls is inefficient and time consuming. On the other hand, modern method like the Advanced Metering Infrastructure (AMI) still faces a challenge in effectively classifying power line outage due to the nature of imbalanced datasets. …

An Iot Based Worker Safety Helmet Using Cloud Computing Technology, Yuthriya Iddi Khamis, Mahmoud Alawi, Waheed Muhammad Sanya

Tanzania Journal of Engineering and Technology (TJET)

Miner safety and security is a major challenge around the world due to the exposure to toxic gases that are frequently released in underground mines. Miners' health is adversely affected primarily by toxic gases, which endanger the workers' lives. Furthermore, human sensory abilities do not detect these dangerous gases. As a result, this paper proposes a safety monitoring system that includes a temperature sensor, humidity sensor, and gas sensors to detect harmful gases and alert miners to those harmful gases using the smart helmet they wear. These gases are transmitted to the control station via the cloud using Internet of …

A Stochastic Spectrum Trading And Resource Allocation Framework For Opportunistic Dynamic Spectrum Access Networks, Mohamed Abdelraheem, Mohammad Mahmoud Abdellatif

Electrical Engineering

In this article, the spectrum trading problem between primary users and secondary networks is investigated. The secondary network requests multiple channels with the targeted availability to satisfy its users’ demands. Due to the uncertainty about the channels availability, stochastic optimization techniques are adopted to find the optimal set of channels for each secondary network for the lowest cost. Two different constraints on the secondary demand are defined. The first one is when the throughput has to be fully satisfied for a certain percentage of time, and the second one is when the expected value of the throughput has to exceed …

Characterization Of Electrophoretic Deposited Zinc Oxide Nanopartices For The Fabrication Of Next-Generation Nanoscale Electronic Applications, Fawwaz Abduh A. Hazzazi

LSU Doctoral Dissertations

Several reports state that it is crucial to analyze nanoscale semiconductor materials and devices with potential benefits to meet the need for next-generation nanoelectronics, bio, and nanosensors. The progress in the electronics field is as significant now, with modern technology constantly evolving and a greater focus on more efficient robust optoelectronic applications. This dissertation focuses on the study and examination of the practicality of Electrophoretic Deposition (EPD) of zinc oxide (ZnO) nanoparticles (NPs) for use in semiconductor applications.

The feasibility of several synthesized electrolytes, with and without surfactants and APTES surface functionalization, is discussed. The primary objective of this study …

A Broadband Circularly Polarised Slot Antenna For Ambient Rf Energy Harvesting Applications, Khatereh Nadali, Patrick Mcevoy, Max Ammann

Conference papers

Energy harvesting is a potential source of power for integrating compact low-power and self-sustainable wireless devices in ambient backscatter communication systems and IoT networks. In this paper, an electrically small circularly polarised (CP) slot antenna for harvesting is proposed. The measured CP bandwidth for axial ratio values less than 3 dB is 990 MHz (1.7 GHz to 2.69 GHz), while the measured impedance bandwidth is 1,930 MHz (1.45 GHz to 3.38 GHz). The proposed structure can harvest energy from common radio frequency signal emitters operating in GSM 1800/1900, 3G/LTE 2100, 3G/LTE 2300, 4G/LTE 2500, and 2.4GHz Wi-Fi bands, which makes …

Electrical Equipment Industry Cluster, Pragati Gautam

2022 REYES Proceedings

The growing collaboration between two or more industries in a specific region in which they work in a symbiotic relationship, providing benefits to each other and contributing in the overall development of the region, is what is popularly known as business clusters. Even though this concept is commonly known and implemented in the West, South Asian economies are unfamiliar with the advantages of this unique business strategy. There are, undeniably, many potential business clusters in these developing countries, which if tapped efficiently, could result into an industrial boom.

This research focuses on investigating the existence of a business cluster in …

Group-Based Data Offloading Techniques Assisted By D2d Communication In 5g Mobile Network, Juma S Ally

Tanzania Journal of Engineering and Technology (TJET)

Machine type communication devices proposed as one of the substantial data collections in the 5G of wireless networks. However, the existing mobile communication network is not designed to handle massive access from the MTC devices instead of human type communication. In this context, we propose the device-to-device communication assisted a mobile terminal (smartphone) on data computing, focusing on data generated from a correlated source of machine type communication devices. We consider the scenario that the MTC devices after collecting the data will transmit to a smartphone for computing. With the limitation of computing resources at the smartphone, some data are …

Real-Time Data Analytics For Monitoring Electricity Consumption Using Iot Technology, Waheed Muhammad Sanya, Gaurav Bajpai, Omar Haji Kombo, Evariste Twahirwa

Tanzania Journal of Engineering and Technology (TJET)

Rising electricity bills as a result of climate variability and new home electrical and electronic appliances are becoming a major source of concern for most end users. Consumers are typically unaware of their household electricity consumption patterns and the costs associated with them, making proper planning and budgeting difficult. Monitoring and controlling energy consumption on appliances can reduce energy costs for end-users. The Internet of Things (IoT) has the potential to provide remote monitoring and control of devices via automated monitoring and control. In this study, we propose an IoT-enabled system for monitoring and controlling energy consumption in homes to …

Renewable Energy Microgrids To Improve Electrification Rate In Democratic Republic Of Congo: Case Of Hydro, Municipal Waste And Solar, Ngondo Otshwe Josue, Aviti Thadei Mushi

Tanzania Journal of Engineering and Technology (TJET)

Worldwide, it is imperative for citizens to have access to electricity. This applies to Congolese--rural and urban dwellers, and if possible, it should be guaranteed by government’s laws and policies. Howev er, the rural and urban areas of Democratic Republic of Congo (DRC) suffer majorly from lack of access to electricity. The major reasons are the high costs associated with connection to the national central grid and production insufficiency. Therefore, one feasible approach to electrify these areas is to use microgrids. This technolo gy is decent and viable option for energy revolution since it incorpo rates energy storage systems, distributed …

An Experimental Approach Towards Pv-Based Solar System Sizing For An Engineering Laboratory, Muyideen O. Lawal

Tanzania Journal of Engineering and Technology (TJET)

This study aims at providing an experimental sizing procedure for a rooftop PV-based solar power system for an engineering laboratory. This was achieved by monitoring the peak power and energy delivered by an installed 20W solar panel into an 18 Ah battery. Knowledge of the average daily peak power and energy was used to determine the percentage rated capacity available for use and the sun hour. A load consumption comparison was also carried out with and without the connection of a load to inverter. In addition to this, the monitoring of the no-load consumption of the inverter was carried out. …

Efficient And Simple Heuristic Algorithm For Portfolio Optimization Collether John, Collether John

Tanzania Journal of Engineering and Technology (TJET)

Markowitz model considers what is termed as standard portfolio optimization. The portfolio optimization problem is a problem which based on asset allocation and diversification for maximum return with minimum risk. Thus, the standard portfolio optimization problem happens when the constraints considered are budget and no-short selling. In reality however, portfolio optimization has realistic constraints to be incorporated such as holding sizes, cardinality and transaction cost. When realistic constraints are added into portfolio optimization problem, it becomes too complex to be solved by standard optimization methods which in this case turns to be an extended portfolio optimization problem. Markowitz solution and …

Viability Analysis Of Ubungo Ii Gas Power Plant Efficiency Improvement Using Co-Generation System, Aviti Thadei Mushi

Tanzania Journal of Engineering and Technology (TJET)

The power utility, Tanzania Electric Supply Company Limited (TANESCO) is faced with challenges of supplying adequate power to the ever-increasing demand. To this end, this paper explores the installed Ubungo Gas Power Plant (UGP II) located in Dar es Salaam to find means of utilizing it in co-generation method. The study embarked on detailed modelling of the system and run simulations which indicated that the co-generation can result to power generation efficiency increase between 10.42 to 50.92%. It is recommended to change the UGP II to exploit this co-generation method. Further, the study could be improved by including more parameters …

Design And Commissioning Of An E-Beam Irradiation Beamline At The Upgraded Injector Test Facility At Jefferson Lab, Xi Li, Helmut Baumgart, Charles Bott, Gianluigi Ciovati, Shaun Gregory, Fay Hannon, Mike Mccaughan, Robert Pearce, Matthew Poelker, Hannes Vennekate, Shaoheng Wang

Electrical & Computer Engineering Faculty Publications

The Upgraded Injector Test Facility (UITF) at Jefferson Lab is a continuous-wave superconducting linear accelerator capable of providing an electron beam with energy up to 10 MeV. A beamline for electron-beam irradiation has been designed, installed and successfully commissioned at this facility, aimed at the degradation study of 1,4-dioxane and per- and polyfluoroalkyl substances (PFAS) in wastewater treatment. A solenoid with a peak axial magnetic field of up to 0.28 T and a set of raster coils were used to obtain a Gaussian beam profile with a transverse standard deviation of ∼15.0 mm at the target location. Monte-Carlo simulations using …

Noncontact Liquid Crystalline Broadband Optoacoustic Sensors, Hengky Chandrahalim, Michael T. Dela Cruz

AFIT Patents

An optoacoustic sensor includes a liquid crystal (LC) cell formed between top and bottom plates of transparent material. A transverse grating formed across the LC cell that forms an optical transmission bandgap. A CL is aligned to form a spring-like, tunable Bragg grating that is naturally responsive to external agitations providing a spectral transition regime, or edge, in the optical transmission bandgap of the transverse grating that respond to broadband acoustic waves. The optoacoustic sensor includes a narrowband light source that is oriented to transmit light through the top plate, the LC cell, and the bottom plate. The optoacoustic sensor …

Machine Learning Applications To Static Timing Analysis, Waseem Mohamed Raslan

Theses and Dissertations

Modeling complex cell behavior is critical for accurate static timing analysis. Effective current source model, ECSM, and composite current source, CCS, waveform data compression became a necessity to reduce the size of technology files and increase the accuracy of the cell characterization data. We used deep learning nonlinear Autoencoders to compress voltage and current waveforms and compared them with singular value decomposition, SVD, approach. Autoencoders gave ~1.67x compression ratio for voltage waveforms better than SVD approach and gave 45x to 55x better compression ratio compared to other lossless techniques like bz2 and gzip. Autoencoders achieved ~1.7x compression ratio for complex …

Modified Q-Learning Method For Automatic Voltage Regulation In Wide-Area Multigeneration Systems, Brook Abegaz, Sina Zarrabian

Engineering Science Faculty Publications

The state-estimation and optimal control of multigeneration systems are challenging for wide-area systems having numerous distributed automatic voltage regulators (AVR). This paper proposes a modified Q-learning method and algorithm that aim to improve the convergence of the approach and enhance the dynamic response and stability of the terminal voltage of multiple generators in the experimental Western System Coordinating Council (WSCC) and large-scale IEEE 39-bus test systems. The large-scale experimental testbed consists of a six-area, 39-bus system having ten generators that are connected to ten AVRs. The implementation shows promising results in providing stable terminal voltage profiles and other system parameters …

Smartphone Control Of Rc Cars, Weston R. Fitzgerald

Electrical Engineering

The smartphone-controlled RC (remote-controlled) car is an inexpensive remote-controlled car designed to be fast and portable. Instead of manufacturing, packaging, and shipping a separate controller, the remote control is implemented in a phone application, which saves time and money in both the design process and the manufacturing process. Utilizing the user’s smartphone is more cost-effective since mobile devices are a common recurrence, and packaging fewer devices results in overall better portability of the product.

This smartphone-controlled car is speedy and intuitive to learn for typical smartphone users. The user can change the car’s speed and direction wirelessly using their phone; …

Behind The Ear (Bte) Hearing Aid, Marco Gaitan, Jaclyn Kimoto, Lawrence Lai, Billy Pho

Electrical Engineering

The product is a Behind The Ear (BTE) hearing aid with the capability to improve the quality of life for people with mild to severe hearing loss and caters to a different consumer through bold exterior design to increase awareness of deafness and normalize hearing loss. In comparison to In The Ear (ITE) and In The Canal (ITC) hearing aids, the BTE hearing aid provides the best amplification while retaining an affordable price. Sound amplification depends on two or more directional microphones embedded in the product to give users the ability to discern the direction of incoming sound easily in …

Microgrid Energy Storage Branch, Evan Luu, Jeffrey Shieh

Electrical Engineering

The microgrid is the future for the electrical utility system. Because of this, future power engineers need to be well-versed in this topic when they go into industry. Cal Poly has created a microgrid laboratory for this very purpose. However, it is missing its battery based energy storage branch. Due to safety concerns, a traditional chemical battery is not suitable for student use. In order to maintain Cal Poly’s learn-by-doing approach, an alternative solution must be implemented. A regenerative power supply meets the criteria for student use. It is capable of simulating the sinking and sourcing capabilities of a battery …

Multi-Effect Guitar Pedal, Ryan K. Madden

Electrical Engineering

This product is a multi-effect pedal to be used with an electric guitar. This unit can distort and overdrive the weak signal from a guitar as well as add chorus, phaser, and compressor effects to the signal. Additionally, the user can choose different serial combinations of the effects, allowing full creativity and experimentation with a multitude of signal chain options. This product, having many different effects, saves space than if the effects were all individual devices. To interact with the product, there is a user interface with buttons, LEDs, and an OLED screen to allow the user to customize the …