Electrical and Electronics Commons^™

Current-Source Dc-Dc Converter For Fiber-Optic Communication Systems, Jissell C. Jose

Master's Theses

In this thesis, a proof of concept for a current-source DC-DC converter for powering sensors used in an underwater communications system is presented. The proposed converter steps down an input current of 0.9 A to 0.625 A, while maintaining an output voltage of 24 V and output power of 15 W. The complete steady-state analysis and design of the proposed converter in its single-stage form is also explained in detail. Performance evaluation of the proposed converter was carried out using LTspice. Results of the simulation demonstrate that the design was able to produce average output current of 0.639 A at …

A Nano-Drone Safety Architecture, Connor J. Sexton

Master's Theses

As small-form factor drones grow more intelligent, they increasingly require more sophisticated capabilities to record sensor data and system state, ensuring safe and improved operation. Already regulations for black boxes, electronic data recorders (EDRs), for determining liabilities and improving the safety of large-form factor autonomous vehicles are becoming established. Conventional techniques use hardened memory storage units that conserve all sensor (visual) and system operational state; and N-way redundant models for detecting uncertainty in system operation. For small-form factor drones, which are highly limited by weight, power, and computational resources, these techniques become increasingly prohibitive. In this paper, we propose a …

Smart Usb-C Wall Plug For The Dc House Project, Ridge Lahti, Dino Maslic

Electrical Engineering

DC operated devices and appliances powered by AC systems suffer inefficiencies resulting from the losses of converting AC energy into DC energy. At Cal Poly, the DC House Project aims to minimize the need for AC electricity in homes and encourage the use of renewable energy systems. The DC House uses a 48V DC bus that must be stepped down for use with increasing number of DC loads in a typical home. In this project, a Smart USB-C Wall Plug is designed to work with USB Power Delivery to provide a variable voltage output for use with these DC loads …

Hvac Hardware Modeling Using Programmable Automatic Controller, Panthil Ketan Patel, Lumanti Tuladhar

Electrical Engineering

The primary purpose of this project is to use the donated programmable logic controllers (PLC) from Schneider Electric to develop experiments for a future lab class at Cal Poly. Our goal as the first group working on this project is to develop an experiment where the PLC can control the HVAC system based on temperature and humidity sensors and user inputs to maintain a desired consistent temperature. The PLC will be controlled using Unity Pro XLS/Control Expert software for simulations. The overall purpose of the experiments will be to demonstrate the potential of the PLC to minimize manual intervention while …

Standalone Wireless Humming Music Synthesizer, Elizaveta Viktorovna Koush, Conrad Kinsey, Alberto Munoz

Electrical Engineering

This project, called a standalone wireless humming music synthesizer, aimed to provide a tool for musicians to make creating music easier. It did this by removing learning barriers and adding an assistive functionality element that current synthesizers fail to address.

Existing methods for synthesizers typically include a keyboard or some collection of buttons to play melodies on. This requires the knowledge of music theory and a learning curve for the instrument, and this device aims to tackle this barrier. A device that can synthesize your voice into high-quality audio removes this musical knowledge barrier and allows anyone to easily convert …

Mars Prototype Rover Environmental Measurement System, James A. Renick

Computer Engineering

In my senior project, the problem I am trying to solve is how to efficiently design, create, and install an original library onto a Mars prototype rover operating system and to further use that library to integrate a new weather measurement sensor device into the rover system with the necessary software and hardware implementations. This is an important and highly valued problem as many aerospace and other engineering companies utilize rovers and other autonomous systems for important research, explorations, and reconnaissance missions and goals. In solving this problem, I utilized many resources that were available to me such as advisors, …

Multifamily Complex Smart Locks For Property Management And Tenant Security, April Mills, Allen Chen, Dana Kumamoto, Michael Cook

Mechanical Engineering

Maintaining and managing hundreds of locks and physical keys for an apartment complex can be time consuming and costly, especially when the apartments turn over to new tenants. Our goal was to develop a smart door lock that is compatible with Obodo’s management app for apartment complexes to make accessing apartments secure and simpler for tenants and easier to manage for owners.

We designed and manufactured one smart door lock that is powered with four AA batteries and utilizes a dynamic NFC device and Bluetooth technology. The board can enter a sleep mode which reduces power consumption. The dynamic NFC …

X-Band Rf Transmitter Design For Multi-Purpose Small Satellite Communication Operations, Omer F. Gumus

Master's Theses

This thesis provides a description of the analysis, design, and tests of an X-band RF Transmitter communication system for small satellites. X-band transmitter systems are becoming popular in the upcoming deep space missions. Most of the deep-space ground stations have been using X-band frequencies to receive or transmit signals. The X-band (<10 GHz) can offer lower atmospheric losses and up to a couple of Mbps data rates for multiple satellite operations. Nowadays, many small satellites have been using frequency bands such as VHF, UHF, L, and S-band frequencies for communication. From deep space to the ground station, the low-frequency ranges are inadequate in providing Mbps level data rates and enough bandwidth for deep space missions.

The main focus of this thesis was the development of the subsystems such as gain block amplifier, Mixer, Bandpass Filter, and RF power amplifier. The subsystems were designed separately, then they were connected together to perform an end-to-end system test. One of the thesis aims is to design …

Design Of An Automotive Iot Device To Improve Driver Fault Detection Through Road Class Estimation, Matt Murray

Master's Theses

Unsafe driver habits pose a serious threat to all vehicles on the road. This thesis outlines the development of an automotive IoT device capable of monitoring and reporting adverse driver habits to mitigate the occurrence of unsafe practices. The driver habits targeted are harsh braking, harsh acceleration, harsh cornering, speeding and over revving the vehicle. With the intention of evaluating and expanding upon the industry method of fault detection, a working prototype is designed to handle initialization, data collection, vehicle state tracking, fault detection and communication. A method of decoding the broadcasted messages on the vehicle bus is presented and …

Smartphone Control Of Rc Cars, Weston R. Fitzgerald

Electrical Engineering

The smartphone-controlled RC (remote-controlled) car is an inexpensive remote-controlled car designed to be fast and portable. Instead of manufacturing, packaging, and shipping a separate controller, the remote control is implemented in a phone application, which saves time and money in both the design process and the manufacturing process. Utilizing the user’s smartphone is more cost-effective since mobile devices are a common recurrence, and packaging fewer devices results in overall better portability of the product.

This smartphone-controlled car is speedy and intuitive to learn for typical smartphone users. The user can change the car’s speed and direction wirelessly using their phone; …

Behind The Ear (Bte) Hearing Aid, Marco Gaitan, Jaclyn Kimoto, Lawrence Lai, Billy Pho

Electrical Engineering

The product is a Behind The Ear (BTE) hearing aid with the capability to improve the quality of life for people with mild to severe hearing loss and caters to a different consumer through bold exterior design to increase awareness of deafness and normalize hearing loss. In comparison to In The Ear (ITE) and In The Canal (ITC) hearing aids, the BTE hearing aid provides the best amplification while retaining an affordable price. Sound amplification depends on two or more directional microphones embedded in the product to give users the ability to discern the direction of incoming sound easily in …

Microgrid Energy Storage Branch, Evan Luu, Jeffrey Shieh

Electrical Engineering

The microgrid is the future for the electrical utility system. Because of this, future power engineers need to be well-versed in this topic when they go into industry. Cal Poly has created a microgrid laboratory for this very purpose. However, it is missing its battery based energy storage branch. Due to safety concerns, a traditional chemical battery is not suitable for student use. In order to maintain Cal Poly’s learn-by-doing approach, an alternative solution must be implemented. A regenerative power supply meets the criteria for student use. It is capable of simulating the sinking and sourcing capabilities of a battery …

Multi-Effect Guitar Pedal, Ryan K. Madden

Electrical Engineering

This product is a multi-effect pedal to be used with an electric guitar. This unit can distort and overdrive the weak signal from a guitar as well as add chorus, phaser, and compressor effects to the signal. Additionally, the user can choose different serial combinations of the effects, allowing full creativity and experimentation with a multitude of signal chain options. This product, having many different effects, saves space than if the effects were all individual devices. To interact with the product, there is a user interface with buttons, LEDs, and an OLED screen to allow the user to customize the …

Carrier Card For Nvidia Jetson Agx Xavier, Kyle Chang

Electrical Engineering

This project prototypes and implements custom carrier cards for interfacing with the Nvidia Jetson AGX Javier within the Zendar Processing Unit (ZPU). The Jetson module is an AI computer used as a computing system for autonomous machines, including robots, drones, and self-driving cars. The carrier card functions as an I/O interface with the Jetson module, and it is designed for and sponsored by Zendar, a start-up designing high-resolution radar imaging systems. The purpose of the carrier card is to function as a collection of multiple I/O interfaces, including HDMI, USB, and PCIE, for users to control the Jetson, to input …

One-Stage Blind Source Separation Via A Sparse Autoencoder Framework, Jason Anthony Dabin

Dissertations

Blind source separation (BSS) is the process of recovering individual source transmissions from a received mixture of co-channel signals without a priori knowledge of the channel mixing matrix or transmitted source signals. The received co-channel composite signal is considered to be captured across an antenna array or sensor network and is assumed to contain sparse transmissions, as users are active and inactive aperiodically over time. An unsupervised machine learning approach using an artificial feedforward neural network sparse autoencoder with one hidden layer is formulated for blindly recovering the channel matrix and source activity of co-channel transmissions. The BSS sparse autoencoder …

Improving The Performance And Evaluation Of Computer-Assisted Semen Analysis, Ji-Won Choi

Dissertations

Semen analysis is performed routinely in fertility clinics to analyze the quality of semen and sperm cells of male patients. The analysis is typically performed by trained technicians or by Computer-Assisted Semen Analysis (CASA) systems. Manual semen analysis performed by technicians is subjective, time-consuming, and laborious, and yet most fertility clinics perform semen analysis in this manner. CASA systems, which are designed to perform the same tasks automatically, have a considerable market share, yet many studies still express concerns about their accuracy and consistency. In this dissertation, the focus is on detection, tracking, and classification of sperm cells in semen …

Outdoor Operations Of Multiple Quadrotors In Windy Environment, Deepan Lobo

Dissertations

Coordinated multiple small unmanned aerial vehicles (sUAVs) offer several advantages over a single sUAV platform. These advantages include improved task efficiency, reduced task completion time, improved fault tolerance, and higher task flexibility. However, their deployment in an outdoor environment is challenging due to the presence of wind gusts. The coordinated motion of a multi-sUAV system in the presence of wind disturbances is a challenging problem when considering collision avoidance (safety), scalability, and communication connectivity. Performing wind-agnostic motion planning for sUAVs may produce a sizeable cross-track error if the wind on the planned route leads to actuator saturation. In a multi-sUAV …

Integrated Circuits Parasitic Capacitance Extraction Using Machine Learning And Its Application To Layout Optimization, Mohamed Saleh Abouelyazid Saleh

Theses and Dissertations

The impact of parasitic elements on the overall circuit performance keeps increasing from one technology generation to the next. In advanced process nodes, the parasitic effects dominate the overall circuit performance. As a result, the accuracy requirements of parasitic extraction processes significantly increased, especially for parasitic capacitance extraction. Existing parasitic capacitance extraction tools face many challenges to cope with such new accuracy requirements that are set by semiconductor foundries (< 5% error). Although field-solver methods can meet such requirements, they are very slow and have a limited capacity. The other alternative is the rule-based parasitic capacitance extraction methods, which are faster and have a high capacity; however, they cannot consistently provide good accuracy as they use a pre-characterized library of capacitance formulas that cover a limited number of layout patterns. On the other hand, the new parasitic extraction accuracy requirements also added more challenges on existing parasitic-aware routing optimization methods, where simplified parasitic models are used to optimize layouts.

This dissertation provides new solutions for interconnect parasitic capacitance extraction and parasitic-aware routing optimization methodologies in order to cope with the new accuracy requirements of advanced process nodes as follows. …

Quantitative Dynamic Cellular Imaging Based On 3d Unwrapped Optical Coherence Phase Microscopy, Arunkumar Gunasekar

Theses

Phase wrapping artifacts are frequently encountered in phase resolved imaging and sensing techniques based on interferometry. When the value of the actual phase (φ) ranges beyond (-π, π], the extracted phase value (wrapped phase Ψ) is artificially increased or decreased by a multiple of 2π.

In this study, we develop a 3D phase unwrapping method that exploits the correlation of 3D phase data (φ(x,y,t)) over the other dimension (t). We validate our 3D unwrapping method using simulated data, as well as experimental data obtained by optically computed phase microscopy (OCPM) recently developed in our lab. Our results show that the …

Transformer Fault Event Detection And Classification Using Pmus, Yadunandan Paudel

Theses and Dissertations

Transformer is one of the most reliable components in an electric power system, however its failure has huge opportunity costs for an electric utility. In this work, we detect transformer electrical faults promptly and accurately classify the fault types using voltage/current data from Phasor Measurement Units. Our work can also eliminate uncertainties which are inherent in traditional transformer fault diagnostic techniques like dissolved gas analysis. In this thesis, first, possible causes of transformer failures are discussed, and four common transformer electrical faults are identified. Second, a comprehensive simulation model for electrical faults is developed. Third, fast and efficient abrupt change …

Challenges And Signal Processing Of High Strain Rate Mechanical Testing, Barae Lamdini

Theses and Dissertations

Dynamic testing provides valuable insight into the behavior of materials undergoing fast deformation. During Split-Hopkinson Pressure Bar testing, stress waves are measured using strain gauges as voltage variations that are usually very small. Therefore, an amplifier is required to amplify the data and analyze it. One of the few available amplifiers designed for this purpose is provided by Vishay Micro-Measurements which limits the user’s options when it comes to research or industry. Among the challenges of implementing the Hopkinson technology in the industry are the size and cost of the amplifier. In this work, we propose a novel design of …

Receptor-Doped Organic Transistors: Transducing Anion Binding From Mixed Ionic-Electronic Transport, Anthony Benasco

Dissertations

Organic semiconductors based on π-conjugated polymers show remarkable properties such as high tolerance to structural defects, low processing temperature requirements, biocompatibility, ease of fabrication, and tunable properties. Conjugated polymers integrated into device arrays can exhibit collective properties sensitive to minor perturbations in the surrounding media. However, these devices rely on serendipitous sensitivity to the analyte of interest, and strategies for specific detection remain a considerable change. There remains a compelling, global need for technologies to monitor phosphate due to its prevalence in agricultural runoff, leading to fish kills and economic decline for commercial and recreational fisheries. The strong hydration energies …

A Broadband Cp Elliptical-Slot Antenna For Ambient Rf Energy Harvesting, Khatereh Nadali, Patrick Mcevoy, Max Ammann

Conference papers

In this paper, a compact broadband CPW-fed circularly polarised elliptical-slot antenna with an inverted- L tuning stub is proposed. The antenna impedance is optimized for broadband operation from 1.62 GHz to 2.97 GHz. The measured CP bandwidth is 934 MHz (1.747-2.681 GHz), that covers common wireless communication bands GSM 1800, GSM 1900, 3G/LTE 2100, 3G/LTE 2300, 4G/LTE 2500, and 2.4GHz Wi-Fi bands. This makes the designed antenna an appropriate candidate for ambient RF energy harvesting purposes.

Worksheet 01 - Monopole, Ashanthi Maxworth Phd

Antenna Design With HFSS

This worksheet guides users on modeling a quarter-wavelength monopole antenna on an infinite ground plane and observing its characteristics. The worksheet starts with parameter settings and continues on to antenna design, boundary setting, radiation setting, and then to simulation and viewing the results.

Worksheet 04 - Dipole, Ashanthi Maxworth Phd

Antenna Design With HFSS

This worksheet shows how to create a half-wavelength dipole, set the feeder through a port, observe directivity, half-power beamwidth, etc.

Worksheet 05 - Loop, Ashanthi Maxworth Phd

Antenna Design With HFSS

In this worksheet, the users can design a small loop. The small loop shows low directivity, hence at the end of the worksheet, the users can chanage the design parameters and increase the directivity.

Worksheet 07 - Bicone, Ashanthi Maxworth Phd

Antenna Design With HFSS

In this worksheet, setps are given to design a full-wavelength biconical antenna. This is a broadband antenna. The worksheet also shows how to observe surface currents.

Worksheet 06 - Arrays, Ashanthi Maxworth Phd

Antenna Design With HFSS

This worksheet designs an antenna array with three identical dipole elemetns. The antenna is operating as a broadside array. By changing the parameters the users can view the grating lobes in addition to the main lobe.

Worksheet 09 Horn, Ashanthi Maxworth Phd

Antenna Design With HFSS

This worksheet designs a pyramidal horn antenna fed by a waveport.

Worksheet 03 - Near Field, Ashanthi Maxworth Phd

Antenna Design With HFSS

This worksheet guides students to change the observational region between, reactive near field, radiating near field, and far-field.