Electrical and Electronics Commons^™

Monte Carlo Tree Search Applied To A Modified Pursuit/Evasion Scotland Yard Game With Rendezvous Spaceflight Operation Applications, Joshua A. Daughtery

Theses and Dissertations

This thesis takes the Scotland Yard board game and modifies its rules to mimic important aspects of space in order to facilitate the creation of artificial intelligence for space asset pursuit/evasion scenarios. Space has become a physical warfighting domain. To combat threats, an understanding of the tactics, techniques, and procedures must be captured and studied. Games and simulations are effective tools to capture data lacking historical context. Artificial intelligence and machine learning models can use simulations to develop proper defensive and offensive tactics, techniques, and procedures capable of protecting systems against potential threats. Monte Carlo Tree Search is a bandit-based …

Power System Study For Oil And Gas Platform Connected To Onshore Grid, Taharim Rosshidi Hezrimi

Student Works (2020-2029)

Normally for oil and gas offshore platform, the electrical power supply is generated from the generator either using gas turbine generator, gas engine generator and diesel engine generator. The main power supply is backup by diesel engine generator in case emergency or during black start of the platform. As the design of oil and gas platform become complex, the size of generator keeps increasing. A new concept is being explored to mitigate this problem. Oil and gas company is looking to provide power generation from onshore and supplying the electrical power to a substation platform offshore and then distributed it …

Coding Against Stragglers In Distributed Computation Scenarios, Malihe Aliasgari

Dissertations

Data and analytics capabilities have made a leap forward in recent years. The volume of available data has grown exponentially. The huge amount of data needs to be transferred and stored with extremely high reliability. The concept of "coded computing", or a distributed computing paradigm that utilizes coding theory to smartly inject and leverage data/computation redundancy into distributed computing systems, mitigates the fundamental performance bottlenecks for running large-scale data analytics.

In this dissertation, a distributed computing framework, first for input files distributedly stored on the uplink of a cloud radio access network architecture, is studied. It focuses on that decoding …

Deep Learning For Quantitative Motion Tracking Based On Optical Coherence Tomography, Peter Abdelmalak

Theses

Optical coherence tomography (OCT) is a cross-sectional imaging modality based on low coherence light interferometry. OCT has been widely used in diagnostic ophthalmology and has found applications in other biomedical fields such as cancer detection and surgical guidance.

In the Laboratory of Biophotonics Imaging and Sensing at New Jersey Institute of Technology, we developed a unique needle OCT imager based on a single fiber probe for breast cancer imaging. The needle OCT imager with sub-millimeter diameter can be inserted into tissue for minimally invasive in situ breast imaging. OCT imaging provides spatial resolution similar to histology and has the potential …

An Information Theoretic Approach To Assess Perceived Audio Quality Using Eeg With Reduced Number Of Electrodes, Sansit Das

Theses

Electroencephalograph(EEG) is a process mainly used in medical and research fields to study the electrical activities in a brain. In this technique, 128 or 256 electrodes are attached to the scalp and the electrical activities of the human brain is recorded with the help of a software. In the global scenario, the EEG responses are studied and analysed to acknowledge any disorders in the brain, such as epilepsy or head injury.

Recent studies performed by researchers, have focused on analysing these electrical activities to access perceived audio quality from users by using information theoretic approaches, such as mutual information. Experiments …

Side-Channel Power Resistance For Encryption Algorithms Using Implementation Diversity, Ivan M. Bow

Electrical and Computer Engineering ETDs

This thesis paper investigates countermeasures to hardware side-channel attacks and proposes a new solution to this ever growing threat against data integrity and security. The side-channel attack methods, differential power analysis and correlation power analysis, are both very powerful techniques and are used to gain access to secrets inside of a field programmable gate array that are otherwise inaccessible, in particular the cryptographic key for the Advanced Encryption Standard algorithm. To counter these attacks, we propose a method of changing the internal hardware configuration of the field programmable gate array using dynamic partial reconfiguration. Using this method, we change the …

Application Of Optimal Switching Using Adaptive Dynamic Programming In Power Electronics, Ataollah Gogani Khiabani

Mechanical Engineering Research Theses and Dissertations

In this dissertation, optimal switching in switched systems using adaptive dynamic programming (ADP) is presented. Two applications in power electronics, namely single-phase inverter control and permanent magnet synchronous motor (PMSM) control are studied using ADP. In both applications, the objective of the control problem is to design an optimal switching controller, which is also relatively robust to parameter uncertainties and disturbances in the system. An inverter is used to convert the direct current (DC) voltage to an alternating current (AC) voltage. The control scheme of the single-phase inverter uses a single function approximator, called critic, to evaluate the optimal cost …

Joint Estimation Of Attenuation And Scatter For Tomographic Imaging With The Broken Ray Transform, Michael Ray Walker

McKelvey School of Engineering Graduate Student Theses & Dissertations

The single-scatter approximation is fundamental for many tomographic imaging problems. This class broadly includes x-ray scattering imaging and optical scatter imaging for certain media. In all cases, noisy measurements are affected by both local events and nonlocal attenuation. Related applications typically focus on reconstructing one of two images: scatter density or total attenuation. However, both images are media specific. Both images are useful for object identification. Knowledge of one image aides estimation of the other, especially when estimating images from noisy data.Joint image recovery has been demonstrated analytically in the context of the broken ray transform (BRT) for attenuation and …

Self Capacitance Based Wireless Power Transfer For Wearable Electronics: Theory And Implementation, Yarub Omer Alazzawi

McKelvey School of Engineering Graduate Student Theses & Dissertations

Wireless power transfer (WPT)

Cognitive Radar Detection In Nonstationary Environments And Target Tracking, Yijian Xiang

McKelvey School of Engineering Graduate Student Theses & Dissertations

Target detection and tracking are the most fundamental and important problems in a wide variety of defense and civilian radar systems. In recent years, to cope with complex environments and stealthy targets, the concept of cognitive radars has been proposed to integrate intelligent modules into conventional radar systems. To achieve better performance, cognitive radars are designed to sense, learn from, and adapt to environments. In this dissertation, we introduce cognitive radars for target detection in nonstationary environments and cognitive radar networks for target tracking.For target detection, many algorithms in the literature assume a stationary environment (clutter). However, in practical scenarios, …

Electrical Measurement Of Sram Cell Variation And Sensitivity To Singe-Event Upsets By Low-Energy Protons, James M. Cannon

Macalester Journal of Physics and Astronomy

With the rise of the transistor in the 1970s, electronics shifted from analog circuitry, where values are stored on a continuum, to digital, in which ones and zeros are the law of the land. Transistors, as a class circuit element, can be affected by radiation and cosmic rays which then cause temporary or permanent failures, depending on the specifics of the situation. On Earth, this poses little risk with all electronics shielded by the magnetosphere, however for space bound electronics, the risks from these extraterrestrial particles are not so negligible. The first step in designing a mission to be able …

Analysis And Design Of A Soft Switching Z-Source Boost Dc-Dc Converter, Mahdi Rezvanyvardom, Amin Mirzaei

Emirates Journal for Engineering Research

This paper proposes a high step-up fully soft switched Z-source Boost DC-DC converter, which uses two resonant paths to create soft switching conditions for switches and diodes and also increases the voltage gain. The proposed converter only has one switch, so it has a simple structure. Furthermore, its control circuit remains pulse width modulation. Since soft switching conditions are provided for all switching elements, the converter efficiency is very high. This converter also has all advantages of Z-source converters. The converter is analyzed and simulated in PSPICE software. The results confirm the aforementioned advantages and features of the proposed converter

Implementation Of A Low Cost, Solar Charged Rf Modem For Underwater Wireless Sensor Networks, Mohammad Abdellatif, Salma M. Maher, Ghazal M. Al-Sayyad, Sameh O. Abdellatif

Electrical Engineering

Underwater communication (UWC) has become an attractive research field over the past few decades. This is mainly due to the increase in underwater applications such as exploration, monitoring, and warning systems. Traditional communications techniques face many obstacles when used underwater. Optical communications require line of sight which is not always maintained underwater due to turbulence. Acoustic communication does not suffer from that, however, it can only operate with very low rates. While radio frequency (RF) communication can only operate over short distances due to the attenuation from the water, it can deliver relatively high data rates and does not require …

Heel Down And Toe-Off Time Measured With Ultrasonic Doppler System And Force Plate Sensor, Sabin Timsina

Honors Theses

Collie Box is a medical device that measures the gait parameters of the person walk- ing in front of it. This device uses the Ultrasonic Doppler system to extract the heel-contact and toe-off times of a person walking within the range of 2-10 meters. These times are used to determine the leg’s swing phase and double stance times. The ultrasonic transducer of 10mm diameter is driven at 40kHz. At the time of the heel-contact and toe-off, foot velocity is zero while the torso part of the human body is still in motion. The wide directivity of 10mm diameter ultrasonic transducer …

Zenneck Waves In Decision Agriculture: An Empirical Verification And Application In Em-Based Underground Wireless Power Transfer, Usman Raza, Abdul Salam

Faculty Publications

In this article, the results of experiments for the observation of Zenneck surface waves in sub GHz frequency range using dipole antennas are presented. Experiments are conducted over three different soils for communications distances of up to 1 m. This empirical analysis confirms the existence of Zenneck waves over the soil surface. Through the power delay profile (PDP) analysis, it has been shown that other subsurface components exhibit rapid decay as compared to the Zenneck waves. A potential application of the Zenneck waves for energy transmission in the area of decision agriculture is explored. Accordingly, a novel wireless through-the-soil power …

Design And Verification Of Search Coil Inductance For Pulse Induction Metal Detection, David Desrochers

Electrical Engineering Undergraduate Honors Theses

As violent attacks have increased at different venues such as schools, the need for affordable and effective metallic weapon detection has increased. Probing and scanning detection wands are the most common seen in use by guards. This project seeks to combine both probing and scanning coils into one pulse induction metal detector. The use of one drive circuit for both LC coil tank circuits further economizes the system. ANSYS Maxwell electromagnetic simulations are used to develop the geometries needed for sensitive metal detection. Analytical, simulation, and experimental methods are used to first verify the design flow for solenoid inductors. These …

Methods Of High-Fidelity, High-Efficiency Class-D Audio Amplification, Kaleb Kassaw

Electrical Engineering Undergraduate Honors Theses

Gallium nitride-based field effect transistors (FETs) have opened a path for full-frequency-range class-D audio amplifiers with low distortion and noise, thanks to their ability to switch at much higher frequencies than that of the upper range of human hearing. Compared to traditional silicon-based transistors, GaN-based transistors offer superior efficiencies, particularly at power levels below their maxima. Paired with an analog-to-digital converter, digital signal processor, and pulse-code modulation to pulse-width modulation converter, these transistors are used to design and implement a solid-state amplifier capable of generating 100 watts of output through speakers with an impedance of 8 ohms using a 1-volt …

Smart Textiles As The Digital Interface Of The Future, Audra Beneux

Electrical Engineering Undergraduate Honors Theses

The growing field of smart textiles could change everyday life, adding an element of interactivity to commonly used items such as clothing and furniture. Smart textiles measure then respond to external stimuli. For scalability in the future, smart textiles must be produced using conventional textile manufacturing craftsmanship. The resulting textile must be durable and comfortable while retaining electrical capabilities. Smart textiles can be fabricating through embroidery, weaving, and knitting using conductive threads. Electronics can also be printed onto textiles. Researchers are also creating higher-order electronics, such as the transistor, on the fiber-level to make the technology in smart textiles as …

A Novel Arc Welding Power Supply With Improved Power Factor Correction, Benjamin H. Tan

Master's Theses

This paper presents the design and development of a novel Arc Welding Power Supply utilizing a modified two-switch forward converter topology. The proposed design improves the power quality by improving power factor to near unity and reducing total harmonic distortion. State space analysis of the proposed circuit showed that the circuit followed a boost-buck input output relationship. Simulation of the circuit was first implemented in LTspice to verify the functionality of the new topology. Hardware implementation of the proposed design was built on a scaled-down prototype for a proof-of-concept of the new topology. The prototype specifications were created for a …

An Investigation Of Diode Failure, Nicholas James Adams

Physics

Solar electricity can be used to cheaply cook food and charge electronic devices. We investigate the viability of using diodes as heating elements for insulated solar electric cooking (ISEC). In addition, information on designing and constructing ISEC compatible phone chargers and rechargeable LED lighting systems is included.

A Virtual Space Vectors Based Model Predictive Control For Three-Level Converters, Waleed Saad S. Alhosaini

Graduate Theses and Dissertations

Three-phase three-level (3-L) voltage source converters (VSC), e.g., neutral-point clamped (NPC) converters, T-type converters, etc., have been deemed to be suitable for a wide range of medium- to high-power applications in microgrids (MGs) and bulk power systems. Compared to their two-level (2-L) counterparts, adopting 3-L VSCs in the MG applications not only reduces the voltage stress across the power semiconductor devices, which allows achieving higher voltage levels, but also improves the quality of the converter output waveforms, which further leads to considerably smaller output ac passive filters.

Various control strategies have been proposed and implemented for 3-L VSCs. Among all …

High- And Low-Voltage Mitigation In Distribution Systems Using Residential Static Volt-Ampere Reactive Compensators, Andrés Valdepeña Delgado

Boise State University Theses and Dissertations

Power distribution systems are experiencing a fast transformation from simple one-way radial feeders to complex systems with multiple sources and bidirectional power flows. The rapid increase of Distributed Generation (DG) connected to the distribution system over the last decade, especially solar photovoltaic (PV), has been the key element to this transformation.

The variable nature of PV-based DG has increased the complexity of voltage regulation in distribution systems. Electric Utilities are facing an increasing number of voltage issues in distribution systems with high penetration of DGs, leading customers to experience voltage levels outside of range A of the ANSI C84.1 standard. …

Investigations Of New Fault-Tolerant Methods For Multilevel Inverters, Haider Mhiesan

Graduate Theses and Dissertations

The demands of power electronics with high power capability have increased in the last decades. These needs have driven the expansion of existing power electronics topologies and developing new power electronics generations. Multilevel inverters (MLI) are one of the most promising power electronics circuits that have been implemented and commercialized in high-voltage direct current (HVDC), motor drives, and battery energy storage systems (BESS). The expanding uses of the MLI have lead to creation of new topologies for different applications. However, one of the disadvantages of using MLIs is their complexity. MLIs consist of a large number of switching devices, which …

Low-Cost Test And Characterization Platform For Memristors, Lyle Jones

Boise State University Theses and Dissertations

The electrical Testing and Characterization of the devices built under research conditions on silicon wafers, diced wafers, or package parts have hampered research since the beginning of integrated circuits. The challenges of performing electrical characterization on devices are to acquire useful and accurate data, the ease of use of the test platform, the portability of the test equipment, the ability to automate quickly, to allow modifications to the platform, the ability to change the configuration of the Device Under Test (DUT) or the Memristor Based Design (MBD), and to do this within budget. The devices that this research is focused …

Study Of A Symmetrical Llc Dual-Active Bridge Resonant Converter Topology For Battery Storage Systems, John K. George

Graduate Theses and Dissertations

A symmetrical LLC resonant converter topology with a fixed-frequency quasi-triple phase-shift modulation method is proposed for battery-powered electric traction systems with extensions to other battery storage systems. Operation of the converter with these methods yields two unique transfer characteristics and is dependent on the switching frequency. The converter exhibits several desirable features: 1) load-independent buck-boost voltage conversion when operated at the low-impedance resonant frequency, allowing for dc-link voltage regulation, zero-voltage switching across a wide load range, and intrinsic load transient resilience; 2) power flow control when operated outside the low-impedance resonance for integrated battery charging; 3) and simple operational mode …

A Novel Three-Level Isolated Ac-Dc Pfc Power Converter Topology With Reduced Number Of Switches, Obaid Aldosari

Graduate Theses and Dissertations

The three-level isolated AC-DC power factor corrected (PFC) converter provides safe and more efficient power conversion. In comparison with two-level, three-level PFC converter has the advantages of low total harmonic distortion, low device voltage rating, low di/dt, better output performance, high power factor, and low switching losses at higher switching frequencies. The high frequency transformer (HFT) grants galvanic isolation, steps up or down secondary voltage, and limits damage in case of a fault current.

The existing three-level converter based on solid-state transformer (SST) topologies convert ac power from the electrical grid to a dc load while maintaining at least the …

A Power Constrained 433-Mhz Low Noise Amplifier, Pablo Alvarez Arellano

Graduate Theses and Dissertations

Within wireless communication systems, low noise amplifiers are critical for the performance of receivers. They are primarily responsible for providing enough gain while adding little noise to overcome the noise of the subsequent stages. The LNA presented here is part of a battery-powered transceiver meant to measure crop nutrient data and relay the information. Therefore, power consumption and area become import considerations. To design for a specific power level, a power-constrained noise optimization method is used. The method sizes the amplifying transistor for a fixed source impedance, power dissipation, technology, and operating frequency. The chosen topology is the cascode stage …

Cybersecurity Methods For Grid-Connected Power Electronics, Stephen Joe Moquin

Graduate Theses and Dissertations

The present work shows a secure-by-design process, defense-in-depth method, and security techniques for a secure distributed energy resource. The distributed energy resource is a cybersecure, solar inverter and battery energy storage system prototype, collectively called the Cybersecure Power Router. Consideration is given to the use of the Smart Green Power Node for a foundation of the present work. Metrics for controller security are investigated to evaluate firmware security techniques. The prototype's ability to mitigate, respond to, and recover from firmware integrity degradation is examined. The prototype shows many working security techniques within the context of a grid-connected, distributed energy resource. …

Partial Discharge Classification For Xlpe Cable Joints Using K Nearest Neighbors Algorithm, Mohd Salleh Muhammad Shairazi

Student Works (2020-2029)

Due to excellent mechanical and electrical properties, cross-linked polyethylene (XLPE) cables are commonly used in the power industry. However, cable joints are the weakest part of XLPE cables and are susceptible to insulation failures. Cable joint insulation breakup can cause large losses for power companies. It is therefore necessary to evaluate the consistency of the insulation for early detection of insulation failure. It is known that there is a link between the partial discharge (PD) and the quality of the insulation. PD analysis is an important tool for assessing the quality of insulation in cable joints. In this study, XLPE …

Ensemble Malware Classification System Using Deep Neural Networks, Barath Narayanan Narayanan, Venkata Salini Priyamvada Davuluru

Electrical and Computer Engineering Faculty Publications

With the advancement of technology, there is a growing need of classifying malware programs that could potentially harm any computer system and/or smaller devices. In this research, an ensemble classification system comprising convolutional and recurrent neural networks is proposed to distinguish malware programs. Microsoft's Malware Classification Challenge (BIG 2015) dataset with nine distinct classes is utilized for this study. This dataset contains an assembly file and a compiled file for each malware program. Compiled files are visualized as images and are classified using Convolutional Neural Networks (CNNs). Assembly files consist of machine language opcodes that are distinguished among classes using …