Electrical and Electronics Commons^™

An Efficient Expression Of The Timestamp And Period In Packet-And Cell-Based Schedulers, Dong Wei

Theses

Scheduling algorithms are implemented in hardware in high-speed switches to provide Quality-of-Service guarantees in both cell-based and packet-based networks. Being able to guarantee end-to-delay and fairness, timestamp-based fair queuing algorithms, which include SCFQ, WFQ, WF2Q and WF2Q+, have received much attention in the past few years. In timestamp-based fair queuing algorithms, the size of timestamp and period determines the supportable rates in terms of the range and accuracy. Furthermore, it also determines the scheduler's memory in terms of offchip bandwidth and storage space. An efficient expression can reduce the size of the timestamp and period without compromising the accuracy. In …

Highway Advisory Radio In The State Of New Jersey, Thomas Mark Nemeth

Theses

Highway Advisory Radio (HAR) is a broadcasting system used by transportation agencies to disseminate vital real-time traffic information to motorists. Each transmitter is restricted by the rules and regulations of the Federal Communications Commission (FCC) to an average broadcast radius of three to five miles. Most commonly these transmitters are located at major highway intersections, such that motorists may take alternate routes in case of congestion or emergencies.

All operational HAR transmitters in New Jersey were identified and their coverage zones were quantitatively characterized in terms of the signal to noise ratio at the receiver. These experimental results were then …

Dynamic Performance Of Isolated Power Converters, David Badia

Theses

Isolated power converters are primarily used in applications where electrical galvanic isolation is required for safety purposes. They are also used in applications, which require various output voltages level. They have been studied from many different aspects, but in this thesis the fundamental circuits of the flyback, the forward and the half-bridge converters are studied and compared extensively, with regard to their dynamic performance.

This analysis will lead us to a better understanding of their behaviour, that is a crucial point in the selection of each topology for a particular application. Moreover, the dynamic response of each converter is different; …

Analysis And Synthesis Of Primary Side Cycle By Cycle Control Of Isolated Flyback Converters, Radoslaw Nalepa

Theses

This work presents the analysis and design of an isolated flyback converter, without feedback from the load side. The converter is controlled from the primary side using the switch voltage and innovative control circuit topologies.

A detail study of the flyback circuit is undertaken including all known parasitics. Besides the standard parasitics, for example the capacitor resistive effect, other more subtle effects are included in the model development such as inter coil couplingj source capacitance etc. Development of these models has provided information about circuit simplifications without losing accuracy of the model. As a consequence of this model development, it …

Uniform Random Number Generation Using Pseudorandom Binary Sequences, Susan Rea

Theses

Random numbers have conventionally been used in a range of applications such as numerical analysis, lotteries and computer simulation and as cryptographic keys. The algorithms used for the production of random numbers are termed pseudorandom, as the numbers produced are not truly random as they emanate from a deterministic periodic source that is they are predictable if a subset of the sequence is known. However, for most applications these pseudorandom number sources are entirely suitable.

For cryptographic key sources, however, the random number sequences must be statistically good and difficult to predict. Linear feedback shift registers are presented in this …

Reduction Of Peak To Average Power Ratio In Ofdm And Ofdm-Cdma System, Jie Cheng

Theses

High Peak to Average Power Ratio is a main problem in Orthogonal Frequency Division Multiplexing(OFDM) system and Orthogonal Frequency Division Multiplexing -Code Division Multiple Access (OFDM-CDMA) system. Considering a compensated High Power Amplifier(HPA), in order to keep linearity for amplification, Input Back-Off(IBO) of the HP-A, has to be increased for handling a high PAPR. Higher 1130 will make HPA less efficient. Additionally, a signal with high PAPR will suffer clipping when PAPR is larger than 1130 of the HPA. Clipping can cause the distortion of the signal and deteriorate the performance of the system. Reduction of PAPR is a main …

Phase Tunability In A Conductor Backed Coplanar Waveguide Patch Antenna, Idan Mandelbaum

Theses

Traditionally beam steering in phase array antenna systems is achieved using tunable phase shifters or switched feed networks. Here, a tunable patch antenna element is suggested as a novel alternative to a combination of a radiating element and a phase shifter. A conductor backed coplanar waveguide patch antenna is chosen due to its suitability to mounted external tuning elements, using varactor diodes. Limited types of lumped tuning circuits, using varactor diodes, have been tested, though a lumped as well as distributed tuning is feasible in the chosen antenna configuration. Approximate analytical models for coplanar waveguide patch antennas with finite ground …

Programmable Latching Probe Microstructures For Wafer Testing Applications, Salima Taifa Sadeq

Theses

The objective of this thesis is to design a programmable wafer testing array on a single chip based on micro electromechanical systems (MEMS) and VLSI. The wafer-scale integration in this thesis is a programmable array of test probes that are used for engineering test of VLSI and ULSI silicon integrated circuits at the wafer level. This consists of two subsystems (1) the VLSI address circuits used for addressing and controlling the MEMS on the chip and (2) the latching probe MEMS microstructure array that actuates into position for testing VLSI wafers. Each of the subsystems have been designed, analyzed and …

Bounded Beam Wave Pulse Propagation And Scattering In Random Media Based On The Radiative Transfer Theory Using 2-D Gauss Quadrature Formula, Sheng-Kai Hu

Theses

The scalar time-dependent equation of radiative transfer is used to develop a theory of bounded beam wave narrow band pulse propagation and scattering in a medium characterized by many random discrete scatters, which scatters energy strongly in the forward scattering direction. Applications include the scattering of highly collimated millimeter waves in vegetation and optical beams in the atmosphere. The specific problem analyzed is that of a periodic sequence of Gaussian shaped pulses normally incident from free space onto the planar boundary surface of a random medium half-space, such as a forest, that possesses a scatter (phase) function consisting of a …

Editing Mpeg2 Video In Compressed Domain, Ren Egawa

Theses

As MPEG2 becomes the heart of most digital video applications, the need to edit an MPEG2 bitstream video in compressed domain has increased. To realize this need, two major technical issues must be resolved: decoder buffer and segment extraction.

In the decoder buffer issue, the edited stream must ensure that the buffer would not overflow or underfiow as the result of the editing. This thesis invented a mathematical model that could describe the editing task and predict the editing effect on the buffer. Based on this model, the thesis then built a method to edit a stream safely. This method …

Experimental Ion Implantation System For Decaborane Ions, Vijay Babaram

Theses

Future generations of Si technology will require ultra shallow junctions (tens of nm) in the drain and source regions of MOS transistors. Fabrication of such shallow p-type junctions requires implantation of boron at ultra low energies (< 1 keV), below the limits of standard ion implantation technology. A proposed solution involves implantation of B₁₀H_x⁺ ions in which boron atoms carry less than 10% of the beam energy.

This thesis is a part of the feasibility study of this new technology. An experimental ion implantation system was designed and built at Ion Beam and Thin Film Lab, NJIT. The system was tested and the mass analyzing magnet was calibrated using argon ions. Decaborane ions, …

Emissivity Measurements And Modeling Of Silicon Related Materials, Vijay Krishnamurthy

Theses

The objective of the thesis was to study the radiative properties of silicon related materials for applications in rapid thermal proceesing. In particular, three distinct materials have been considered - Silicon, SIMOX and Tantalum.

The research highlights are Establishment of spectral emissometry as a novel, reliable and reproducible technique for a) Determination of wavelength and temperature dependent reflectivity, transmissivity, emissivity of silicon related materials and structures. The emissometer operates in the wavelength range of 1-20µm and temperature range of 300-1200K. b) Establishment of methodoligies to obtain the frnndemental constants. Effects of wavelength, temperature, total available free carriers by doping types …

Variable Gain Control Of Brushless Dc Motor Control With Low Resolution Sensors, Chung-Hsiang Wang

Theses

In this work, feasibility of using low cost, low resolution sensor for high performance brushless dc (BLDC) motor speed control is investigated. Conventional control, using a tachometer or high resolution encoder, suffers from drawbacks such as high cost, large physical volume, and high sensor processing bandwidth. On the other hand, sensorless BLDC motor, appealing in its hardware simplicity, does not provide sufficient fast performance. Using a standard low resolution sensor, such as a hall sensor or commutation encoder, a compromise between cost and performance can be obtained. However, the use of a low resolution sensor does pose a challenge to …

Development Of An Ion Source For Implantation Of Decaborane, Ravidath Gurudath

Theses

Future generations of Si technology will require ultra shallow junctions (tens of nm) in the drain and source regions of MOS transistors. Fabrication of such shallow p-type junctions requires implantation of boron at ultra low energies (≡1keV), below the limits of standard ion implantation technology. A proposed solution involves implantation of B₁₀H_X⁺ ions in which boron atoms carry less than 10% of the beam energy. Thus shallow implantation may be possible with standard ion implanters operating at tens of kV.

This thesis is a part of the feasibility study of this novel technology. The ionization of …

Handoff Effect On Prma (Packet Reservation Multiple Access) In Micro-Cellular System, Dongsuk Park

Theses

PRMA(Packet Reservation Multiple Access) has been proposed for third generation wireless information network by Goodman et al. [5] [4]. Due to small micro cell radius mobile initiated handoff has been proposed to disperse the burden of BS(Base Station) [14]. Even though these frequent handoffs will not burden on BS, increased contends due to handoff will affect the over all performance of PRMA.

In this paper, we analyze the handoff effect on PRMA performance under micro-cellular system. Steady state speech terminal model with handoff is proposed.. Stabilities are derived based on proposed steady state terminal model[F(c_s)=M] and also increased …

Graphical User Interface For The Dsp : Using Texas Instruments Tms320c31 And Labview, Tahir Nazir

Theses

Digital Signal Processors (DSP's) have become very popular due to their ease of operation, economic value, adaptability and availability. However, the development environments for the DSP are still the archaic Assembly and C language programming. It is tedious, error prone and time consuming to develop and use DSP applications using these compared to Graphical User Interface development tools if available. In the modern age programming is very heavily done in object oriented graphical languages like the Visual C++ and Visual Basic. Windows also gives a good graphical user interface.

LAB VIEW with its readily available ensemble of good analysis, programming …

Vibration Control Of Ultra-High Precision Magnetic Leadscrew Using Recurrent Neural Network, Bhaskar Vinayak Dani

Theses

Ultra-high precision positioning is of strategic importance to modern industrial processes such as semiconductor manufacturing. Traditional drives with mechanical transmission elements exhibit nonlinearities such as friction, backlash and hysteresis which limit the system performance significantly. The magnetic leadscrew in this work belongs to the class of contactless drives which overcome the above mentioned limitations of contact-type drives. The operation is based on leadscrew/nut coupling but unlike mechanical Ieadscrews, the threads of the nut and the leadscrew are aligned magnetically and do not come in contact. Thus, "hard" nonlinearities are substantially reduced resulting in high precision and high resolution.

The dynamics …

A Signal Conditioning Approach For The Extraction Of The Oscillatory Petential From The Electroretinogram, Peter Haines Derr

Theses

The oscillatory potential (OP), a signal component of the electroretinogram (ERG), was investigated to determine correlation of the OP and pathological conditions of the inner retina. Large transients characterize the ERG. Such transients stimulate a filter's natural response. Since these responses can co-occur with the OP, a distorted OP will be extracted. A proposed signal windowing and padding technique for conditioning the ERG signal has been implemented for the extraction of a ntnimally distorted OP.

Windowing is used to capture only the OP period. The windowed ERG signal is then signal conditioned to generate initial values for the filter's state …

Vibration Control On Linear Robots With Digital Servocompensator, Roger Kobla Kwadzogah

Theses

Control application for active damping of structural vibrations and acoustic noise in mechanical systems is one of the engineering fields that can benefit from advances made in digital signal processors. This thesis project is one such application. It is about a vibration control at the loading point of a high speed linear robotic workcell. A lead zirconate titanate piezoelectric ceramic is used as the actuator and an accelerometer provides the sensing. From experimentally measured frequency response of this system, a shaping filter is designed and added on. The reshaped system is fitted with a third order transfer function design model. …

Development Of A Context-Specific Search Engine, An Executive Information System, And A Novel Www Ready External Cost Model, Amit V. Revankar

Theses

NJPIES is associated with Information Ecology and Sustainability, a holistic approach to environmental data collection, compilation, integration and provision that puts people, not technology, at the center of the environmental information world.

The first main goal of this project was to develop an algorithm and associated computer-based tool that could perform a lifecycle cost analysis for a model system. The application developed solved the primary problem associated with the lifecycle cost analysis of a product: it accounted for all costs (e.g., environmental costs such as ecological costs and health costs associated with emissions) of the activity. A lifecycle cost analysis …

Oodini 2.0 : An Enhances Graphical Schema Representation For Object-Oriented Database, Kamil Shahab

Theses

The graphical representation of object-oriented database (OODB) schemas is useful for The designers and users of a database system. The aim of our project was to enhance the existing version of OOdini, an interactive graphical tool for editing OODB schema. The new features include interactive modification and description of objects in the schema. Data structures for representing classes and attributes have been altered to incorporate object/data types as well as a descriptive string. The software has been implemented using ObjectMaker, a toolkit to design your own methodology using the ObjectMaker Extension Language.

Radiative Properties Of Ir Materials, Manish R. Babladi

Theses

The objective of this thesis is to study the radiative properties of materials of interest in the infrared range of wavelengths. In particular, three distinct materials have been considered here - Erbium oxide, alumina and quartz. Erbium oxide has unique selective line emission, which gives a high emittance at a particular wavelength and low emittance in the rest of the infrared spectrum. It has applications in the design and development of thermophotovoltaic (TPV) generators. Because of its selective emission properties, erbium oxide assists in concentrating the radiant energy into a narrow band near the bandgap energy of the TPV cell, …

Dual Frequency Bi-Othogonally Polarized Antennas For Gps Applications, Anand Arun Mahale

Theses

Dual frequency bi-orthogonally polarized antenna to be used in Global Positioning System applications operating in Li (1575.42 ± 10.23 MHz) and L2 (1227.60 ± 10.23 MHz) Bands has been studied. To ensure compatibility with existing applications, the antenna size is limited in dimensions to 4.120" x 4.680" x 1.250" including the radome. Orthogonally placed two dual frequency probe excited patches were designed using a high dielectric constant substrate (ε r = 9.8 and thickness of 250 mils, Rogers TMM10i material) to obtain vertical and horizontal polarization for each band. The measured performance of this antenna showed good agreement with the …

An Interactive System For The Estimation Of Emissivity Of A Wafer In A Rapid Thermal Processing Chamber, Maurizio Fulco

Theses

Rapid thermal processing (RTP) is a method of thermally processing wafers for the manufacture of integrated circuits. During the thermal processing of wafers, it is essential that the wafer temperature follow a pre-specified temperature trajectory and that the temperature across the wafer be uniform especially at high temperatures. To ensure that the above objectives of RTP temperature control be met at any time during the process, the estimation of some parameters of the process is of fundamental importance in the design of the control system.

This thesis demonstrates the implementation of an interactive software system in which the emissivity of …

Implementation And Performance Study Of Image Data Hiding/Watermarking Schemes, Arkadiusz Edward Komenda

Theses

Two data hiding / watermarking techniques for grayscale and color images are presented. One of them is DCT based, another uses DFT to embed data. Both methods were implemented in software utilizing C/C++. The complete listings of these programs are included. A comprehensive reliability analysis was performed on both schemes, subjecting watermarked images to JPEG, SPIRT and MPEG-2 compressions. In addition, the pictures were examined by exposing them to common signal processing operations such as image resizing, rotation, histogram equalization and stretching, random, uniform and Gaussian noise addition, brightness and contrast variations, gamma correction, image sharpening and softening, edge enhancement, …

Telephone-Accessed Controller Using Cebus For Device Control Over Power Line, Gerald Aska

Theses

The CEBus standard has made it possible for devices developed by different manufacturers to communicate over the power line. Further, the standard allows analog adjustments of devices besides transmitting and receiving binary information. This Controller extends the distance from which these devices can be controlled.

To extend the distance of communication with a device, a telephone line interface was developed that allows the user to communicate with a CEBus device via the Controller. The Controller responses [sic] to Central Office signaling and opens its communication channel to allow the user to provide it with the commands by using the telephone …

Investigation Of Pathophysiologic Trends In Caucasian And Afro-American Hypertensives By Means Of Heart Rate Variability Recording During Upright Tilt-Table Testing, Jose F. Torrealba

Theses

The incidence of hypertension is more prevalent among the Afro-American population than the Caucasians and there is not a satisfactory explanation for this discrepancy.

Heart Rate Variability (HRV) has been demonstrated to reflect the relative activities of the sympathetic (SMP) and parasympathetic (PSMP) divisions of the autonomic nervous system (ANS).

This study consisted in comparing the HRV, as well as the blood pressure (BP) of four different groups during up-right tilt table testing. The subjects were grouped by age, gender, race and health condition. Analysis in time and frequency domain was applied to the data. In the frequency domain, the …

Petri Net Modeling And Performance Analysis Of Can Fieldbus, Ji-Qiong Zhou

Theses

The CAN FB (Controller Area Network FieldBus) has been in existence for ten years. It supports automated manufacturing and process control environments to interconnect intelligent devices such as valves, sensors, and actuators. CAN FieldBus has a high bit rate and the ability to detect errors. It is immune to noise and resistant to shock, vibration, and heat. Two recently introduced mechanisms, Distributed Priority Queue (DPQ) and Priority Promotion (PP) enable CAN FieldBus networks to share out the system bandwidth and grant ail upper bound on the transmission times so as to meet the requirements in real-time communications. Modeling and analysis …

Radiative Properties Of Silicon, Anamika Patel

Theses

The objective of this thesis was 1) to study the radiative properties of silicon in the wavelength range of 1 to 20 microns and temperature range of 30 to 1000°C for the development of a multi-wavelength pyrometer 2) to develop a [sic] methodologies for deconvolution of the measured optical properties to yield fundamental optical constants of bulk materials. A novel spectral emissometer has been utilized for measurement of the temperature dependent radiative properties of silicon. The temperature determination capability of the emissometer was tested and verified using a standard thermocouple embedded in a silicon wafer. The temperature measurement accuracy, with …

Design, Fabrication And Characterization Of Silicon Microlenses For Ir-Ccd Image Sensors, Dhiren Pattnaik

Theses

There is a growing trend in the study of Focal Plane Arrays(FPAs) of very small microlenses, used for a wide variety of imaging and sensing applications, to increase optical efficiency. Present day sensor technology might take a different direction altogether with the development of compact, high quality, high resolution imaging microlenses, which could make the fill factor >90%. A method to increase light sensitivity of Interline Transfer(IT) type image sensors is to position microlens FPAs on top of the image sensors. FPAs are structures of small lenses which focus the incoming light on the photo sensitive part of the image …