Electrical and Electronics Commons^™

Efficient Multiprocessor Scheduling By Mean Field Theory Neural Networks, Pei-Ken Yi

Theses

In this thesis, we develop an optimization method based on Mean Field Theory (MFT) Neural Networks to solve the Task Scheduling problem. The MFT algorithm combines characteristics of the Simulated Annealing (SA) algorithm and the Hopfield neural network. MFT exhibits rapid convergence and at the same time it preserves the solution quality afforded by SA. Since MFT has been successfully used to solve the Traveling Salesman Problem (TSP), a new modification to MFT is also presented which supports Task Scheduling problem. The temperature behavior of MFT during Task Scheduling is approximately analyzed and shown to possess a critical temperature (71,) …

Integrated Digital Speech System With Pc, Zhen Zhu

Theses

A PC-based real-time digital speech processing system is designed. Speech synthesis, analysis, storage and retrieval are implemented in the system with intelligent telephone functions. Speech data are stored on floppy disk and easy to retrieve. Though floppy disk is slow in speed, real-time processing is achieved with low bit rate coding. The computer gets speech data from a digital speech processing unit or send data to it through a synchronous seiial communication port. The analog input of digital speech processing unit can be selected from the telephone line or the microphone, and output of the digital speech processing unit can …

Decomposing Non-Product Form Queueing Lattices Through Autorouting With A* Algorithm, Chun-Chang Yu

Theses

Direct solution techniques are expensive for the state transition lattice of a class of non-product form queuing modes. In this thesis, Autorouting with A* algorithm is adapted to decompose it as solvable subsets which can be solved sequentially and independently. Autorouting with A* algorithm is heuristics in problem solving. It also is one of a class of global optimization problems that are difficult to solve. Some queuing modes of type A will be decomposed in this thesis through Autorouting with A* algorithm.

N-Cross Coupled Phase Locked Loops, Joseph C. Aboukhalil

Theses

Interference cancelation has been mainly performed using arrays, in an important issue in communication both array and spatial cancelation and time domain approach were used. In array applications, depth of cancelation may dependent on the interferences to background power ratio and their spatial distributions. Also, array cancelers are inadequate when the signals are less than an array beamwidth apart. The latter was dealt with using supperesolution and eigenanalysis methods. Different time domain methods were used in the past. Among them what is termed Cross-Coupled PEL. It is an arrangement of two PLL each one is locked on and tracking one …

Adaptive Stack Filtering By Lms And Perceptron Learning, Yu-Chou Huang

Theses

Stack filters are a class of sliding?window nonlinear digital filters that possess the weak superposition property(threshold decomposition) and the ordering property known as the stacking property. They have been demonstrated to be robust in suppressing noise. Two methods are introduced in this thesis to adaptively configure a stack filter. One is by employing the Least Mean Square(LMS) algorithm and the other is based on Perceptron learning.

Experimental results are presented to demonstrate the effectiveness of our methods to noise suppression.

Slotted Aloha Protocol For Packet Transmission Via Satellite Link : Throughput Performance Of Continuous Transmission Packet, Solon Karashialis

Theses

The throughput performance of multi-access schemes for data traffic through a satellite channel is analyzed in this paper. Three general schemes are described: channel reservation schemes, random access schemes, and padket reservation schemes. This thesis considers only the random access schemes. Analysis and comparison between ALOHA and Slotted ALOHA are made, but the main emphasis is on satellite channel throughput. A continuous transmission protocol for Slotted ALOHA is suggested in which each ground earth station repeats the transmission of each packet in a number of random repetition slots. The channel is idle when no ground station (GS) is transmitting on …

An Integrated Circuit X-Ray Sensing Array Based On A Cmos Flip-Flop Cell, Huan-Chung Lee

Theses

A novel X-ray sensor IC has beeli designed which counts individual photons at rates up to 5,000,000 counts per second. A two-dimensional X-ray flip-flop sensor array, consisting of an 30 x 30 matrix of CMOS flip-flop sensors integrated in one chip together with an internal clock generator and access selection circuitry is described. A flip-flop sensing cell contains cross-coupled CMOS devices, one of which is connected to a large-area reverse-biased diode. A large area diode exposed to X-ray flux triggers the flip-flop. By reading out the final stable state of the flip-flop, the absence or presence of an X-ray photon …

Design And Development Of Ccd Camera For Document Scanner Using Optical Fiber Bundle, Aniruddha P. Joshi

Theses

A CCD camera for the gray scale document line scanner has been designed and developed at Photon Imaging Corp. The scanner consists of a revolutionary optical fiber bundle, CCD camera, and control electronics. The key concept resides in the fiber-optic bundle. At one end it has a linear array of equally spaced light guides. These terminate at the opposite end in a square array with a polished surface for viewing by a camera. The fan-out from linear to square end is not done with attention to ordering, so the bundle may be relatively inexpensive. Reordering is done electronically using an …

Electromagnetic Transients Program Interfacing, Enhancement And Comparison With Spice, Siswa Trihadi

Theses

The Electromagnetic Transients Program (EMTP) is a computer program used to simulate high speed power system transients. The EMTP input data structures and the rules in setting up the input data file are described in this thesis by means of two sample cases i.e an RLC series circuit and a sin le line to ground fault in power system.

The EMTP input data are very detailed an highly-structured column-dependent. To improve the user-friendliness of EMTP by ignoring the difficulty of arranging the column structures, this thesis presents the EM P User Interactive Program. Sample cases using this interactive program are …

Estimating 3-D Motion And Structure Parameters Of A Rigid Planar Object By Establishing Landmark Correspondences, Herman Agustiawan

Theses

The application of a landmark based approach in recognizing 3-D rigid planar objects[3] along with two different motion and structure estimation algorithm [21][23] have been studied to perform motion and structure estimation tasks of moving objects. The recognition algorithm is based on a sphericity value derived from affine transformation that maps feature points in the object under observation from first to second view in the 2-D image space. The motion and structure estimation algorithm is based on a unique mapping given four or more feature point correspondences.

More than ten experiments have been done including small and large rigid motions. …

A Transistor Delay Model Based On Charge Conservation, Bharatsingh K. Bisen

Theses

Delay information of a circuit is often used in the areas of timing verification, timing analysis, race detection and circuit optimization. Given a circuit its delay can be estimated by various simulation techniques. SPICE is one of the simulation techniques, but it is seen that with the increase in the complexity of the circuit the SPICE circuit simulation technique to obtain delay information become cumbersome and computationally too expensive. So as to overcome the above disadvantages of the circuit simulation technique to obtain delay information various timing delay models were developed. However general survey of most of these timing delay …

Digital Correlators For Spread Spectrum Communications, Raymond B. Chadwick

Theses

The design and application, in spread spectrum communications, of a digital correlator implemented in a Xilinx Field Programmable Gate Array is presented. Spread spectrum communications, correlators and Xilinx Field Programmable Gate Arrays are first introduced. A digital correlator is designed and implemented in a Xilinx Field Programmable Gate Array. Cascading correlators to increase the correlation dimensions is next explored. The maximum operating frequency of the digital correlator is calculated and simulated to be 40 Mhz; a significant speed improvement over commercially available correlators such as those from TRW.

Recovering Surface Structure Using Direct Method, Zhu Ying

Theses

A new approach to recovering surface structure from a pair of stereo images is proposed in this thesis. The approach is based on an extension of the concept of optical flow to a spatial sequence of images. z.e., the unified optical field (DOFF). A direct method in spatial domain is developed which is able to recover surface structure that can be characterized by an Nth order polynomial equation. The order N of the surface can be one. a planar surface. or two, a cylindrical or spherical surface. for example. or any number higher than two. This is a big improvement …

An Investigation Of Optoelectronic Integrated Circuit Receiver, Dinar S. Gupte

Theses

This thesis report presents an investigation of an OptoElectronic Integrated receiver Circuit (OEIC). An OEIC on Silicon (Si) substrate is analyzed and simulated as part of this investigation. The OEIC is based on GaAs technology. The advantages of this are its compactness, high speed, low noise and high reliability in light wave communication systems. A higher output signal is required to make such devices suitable for practical applications. This is achieved by the use of a cascode stage. The fabrication techniques of the relevant semiconductor devices have also been discussed.

In light wave communication systems, the region of minimum losses …

Wideband Microstrip Antenna Optimization, Amer Muhammad Alsawadi

Theses

An annular ring patch microstrip antenna was investigated numerically from the bandwidth aspect for a satellite link application. The desired portable antenna should occupy the physical volume of a typical briefcase and operate in the 400-500 MHz band. Numerical optimization is carried out using a commercially available computer package (EM, by Sonnet Software Inc.). The parameters optimized include the substrate thickness, feed location along the annular patch antenna and its relative dimensions. The software package was numerically validated for the rectangular patch geometries reported in the open literature. Experimental verification of this work is left to be carried out in …

Optimization On Isdn In Multihop Radio Networks Through Genetic Algorithm, Prashant H. Pahade

Theses

Integrated service of voice and data on a single network has received considerable attention recently. Various techniques have been proposed and analysed for multiplexing voice and data over a large bandwidth channel. Efficient channel allocation for voice and data on multihop radio network is what we are most concerned about. In this paper, we address the problem of determining optimal access policies for a tandem ISDN network by using Genetic Algorithm. Computer Simulation shows that this leads to the decision which is beneficial to the services of both voice and data in the network.

Holographic Photo-Induced Electrochemical Etching Of Diffraction Grating In N-Inp, Pei-Chen Pien

Theses

Maskless laser-induced etching and plating is a novel technology for etching a three dimensional profile on semiconductor wafers. Using this technique, we may avoid the contaminating mask stage and achieve in-situ monitoring of the on-going process. In this thesis, we have presented findings on light diffraction from an etched pattern in a thin-film cell configuration. We suggest that the etched pattern develops mostly linearly in time with this arrangement, although indirect monitoring of the reaction process such as by light diffraction, should be carefully interpreted. In-situ light diffraction monitoring appear as if light was scattered from an etched pattern developed …

A Petri Net Simulation Tool, Ashish H. Shukla

Theses

A user friendly and highly interactive graphical tool for drawing, editing and simulating translated Petri Net models is developed. This SunView based tool allows simulation to be carried out in the 'step' and 'run' modes. In the 'run' mode it produces a log file of the simulation run which consists of: a) total number of tokens in the net; b) names of the transitions that fired; and c) the system state reached after each step's execution. The tool offers a new solution to the problem of modeling concurrent and interlocked systems, such as computer systems, modular software, flexible manufacturing systems …

Electrical Measurements Of Mos Structures Fabricated On Etched Silicon Surfaces, Venkata Ramana Vankayalapati

Theses

This thesis details the electrical characterization of thermally grown thin SiO₂ films on virgin and plasma etched silicon surfaces. The electrical characterization techniques employed for the present study are high frequency Capacitance Voltage(C-V) and Current-Voltage(I-V) measurements. The structures used in this study are Al/Polysilicon/SiO₂/Si/A1 capacitors fabricated on n-Si and p-Si substrates. These capacitors with areas in the range of 0.001-0.05 cm₂, were made using various plasma process conditions and etch reactors.

Based on the experimental results of the C-V anlaysis, in comparison of the controls samples with the plasma treated samples, we could not see …

Electron Field Emission Through A Very Thin Oxide Layer, Guang Yang

Theses

Field Emission of an emitter covered with a very thin oxide layer is modeled and calculated numerically. The additional barrier due to the oxide layer is included in the tunnelling problem by using the standard WKB method and tunnelling transmission matrix method. The following physical parameters are considered: the oxide barrier height, the oxide conduction band edge electron effective mass, and the oxide dielectric constant. Compared with the Fowler-Nordheim equation, which was derived for a clean metallic emitter, the calculation of this work shows a reduction of the emission current density from an emitter covered with an oxide layer a …

Simulation Study Of Monolithic 8-12 Micron Gaas/Algaas Multiple Quantum Well Infrared Image Sensor, Ye Zhu

Theses

The design of a monolithic 8-12 micron GaAs/AlGaAs multiple quantum well infrared image sensor has been tested by computer simulation using PISCES-IIB and SPICE3B.1 software packages. The device structure is in the form of a monolithic GaAs/AlGaAs multiple quantum well (MQW) photoconductor integrated with a GaAs MESFET readout circuit. The readout MESFET's are located in the top layer of the MQW so that a relatively standard GaAs MESFET design and processing technology can be used. The theoretical feasibility of such a vertically integrated structure and the processing compatibility of GaAs/AlGaAs MQW and GaAs MESFET's were investigated in this work.

Our …

Analysis Of Field Distribution Of A Dielectric Resonator And Its Applications, Manohar R. Kamath

Theses

Dielectric resonators (DR) are suitably shaped objects made of high dielectric constant materials like TiO₂, BaO, ZnO, and accessory ingredients, which can function as electrical resonators covering a very wide frequency range upto 40GHz. The physical dimensions of dielectric resonators are in mm range. High dielectric constant material resonators seem to be ideally suited for microwave applications because of their miniature size, low loss, insensitivity to magnetic dc biasing fields, and ability to concentrate large RF magnetic fields in small volumes. However temperature stabilization of dielectric resonators is an important consideration as the center frequency is a function …

Performance Evaluation Of Extended Token Ring Network Under Message Priorities, Prakash B. Kukadia

Theses

Local Area Networks carrying multiple priority classes of messages have received considerable attention recently. A simulation model of a symmetric, priority based network, consisting of token ring networks interconnected by a bridge is implemented. Messages are divided into two priority classes, namely, high priority classes and low priority classes. Two different approaches are considered for transmission of high priority messages. [1] Each station transmits the same amount of high priority traffic when the token reaches the station, regardless of the time elapsed from previous token arrival. [2] The amount of high priority traffic transmitted by each station may vary at …

Study And Characterization Of Ingaas Photodiode And Photodiode Arrays, Krishna R. Linga

Theses

This thesis describes the InGaAs p-i-n photodiodes, photodiode arrays and their characterization. A work station was also built for the opto-electrical characterization. The main feature of the In,_zGa_iAs photodiodes with x > 0.53 is its response to higher wavelengths than the standard lattice-matched photodiodes. An In_xGa_1-xAs photodiode with x = 0.88 respond to 2.6 μm wavelength. The application of these photodiodes is forlIber optic communications, spectroscopy and instrumentation. A complete characterization and analysis of the In_0.88Ga_0.12As photodiodes is presented. Dark current analysis, which is a critical parameter in photodiodes, …

Rotary Micromotor Design With Ic-Compatible Processing, Hong Yu

Theses

Several microelectromechanical rotary motors have been designed and simulated with varying rotor and stator configurations. All of these micromotors operate with an electrostatic power source and have rotor diameters varying from 0.2 to 0.4 mm. These micromotors develop torques in the range 8 to 50 picoNewtons with rotors of polysilicon with 2 micron film thickness based on the detailed simulations of this thesis using a 3-phase voltage power source. The geometries modelled in this work are side-drive and vertical-drive configurations. These micromotors obtain drive torque from the fringe-field differential at the periphery of the rotor poles.

Unlevitated micromotors (with bearings) …

A 512 X 512 Random Addressable Variable Resolution Image Sensor, Chakravarthy Yarlagadda

Theses

This thesis presents the design and layout of a 512 x 512-element with 20μm x 20μm pixels image sensor that emulates the properties of the human eye and is useful in high speed processing of visual data for machine vision applications. The imager will be able to operate with random-address selection in variable resolution or with multiple regions of interest to reduce the number of pixels readout. The selection of the pixels is done by x-y addressing the MOS switches which connect the photodiode pixel to the output through the sense lines. The design of column decoder and row decoder …

Photo-Induced Electrochemical Etching Of Inp Semiconductor In A Thin Film Cell, Bungsu Iskandar

Theses

The Photo-Induced Electrochemical Etching of n-InP wafer in aqueous solution is investigated for both reservoir and capillary systems. A sinusoidal spatial variation of light intensity pattern is directly illuminated and promoting etching on an InP semiconductor wafer. The etching process is time-efficient, and produces highly isotropical and a promising high resolution pattern. It gives a good reproducibility and has less contaminating features. Its features may be explained by a non-linear relationship between the electrolyte concentration and the photo-generated holes density at the interaction surface. An optimal reaction rate is determined by the ratio of the reactivity to ionic diffusion, either …

Design Of A Cmos Temperature Sensor With Eeprom Error Correction Scheme, Jin-Ku Kang

Theses

This thesis describes the design and operation of a CMOS temperature sensor operating at very low power with an EEPROM error correction scheme including the physical layout. This device is designed for applications requiring very low power including biomedical and optically powered device applications. The sensor output is an analog voltage. The temperature sensing cell is implemented with two BJTs having different emitter areas. An op amp dissipating about 300 micro-watts power is designed and is used to amplify the sensor output voltage with a gain of 85dB. A novel EEPROM is used to correct nonlinearity error of the temperature …

Max/Min : A Novel Rank Order Based Filter Family, Raafat E. Kamel

Theses

In the early development of signal and image processing, linear filters were the primary tools. Their mathematical simplicity made them easy to design and implement. They also offered satisfactory performance in many applications. However, they show poor performance in other cases, such as image processing.

Nonlinear filtering offered a solution to these problems. Nonlinear filtering has undergone a lot development for a long time. Among the first known nonlinear filters was the median filter, which was proposed by Tukey. Median filter preserves signal or image details better compared to a linear filter. Later other nonlinear filters were developed, including median …

Design And Simulation Of Submicron Microelectronic Vacuum Triodes, Hou-Jun Wang

Theses

This thesis presents the first design and detailed Simulation of submicron vacuum microelectronic triodes static characteristics. In this thesis a new 5-electrode active device is emphasized.

These devices have potentially important advantages over semiconductor devices. They can be used in extreme environments. The picosecond transit time for internal electron ballistics provide optimism for very fast devices applications. It appears reasonable to fabricate these devices using standard VLSI processing equipment. Further, the micron dimension makes " vacuum microelectronic chips" a reasonable goal.

Devices are characterized for static parameters including electron trajectories, electric field contours, and voltage potential contours. The field emission …