Electrical and Electronics Commons^™

Performance Evaluation In Terms Of Congestion And Flow Control Of Interconnected Token Ring Local Area Networks, Muhammad Salim Raza

Theses

In an interconnected network, if user demands are allowed to exceed the system capacity, unpleasant congestion effects occur which rapidly neutralize the delay and efficiency advantages. Congestion can be eliminated by using an appropriate set of traffic monitoring and control procedures called flow control procedures. This thesis first investigates the major technical concepts underlying the token-ring technology; performance and flow control issues and then gives an approximate analytical solution in terms of mean end-toned delay in a system of token-ring local area network interconnected through bridges. The analytical solution is based on an approximation of the mean end-to-end delay in …

A Parallelogram Four-Frame Model In 3-D Motion And Structure Recovery Using Unified Optical Flow Field Approach, Zhichun Lin

Theses

In this paper a new concept of the unified optical flow field (UOFF) for 3 D motion analysis from a stereo image sequence is implemented which is an extension of the temporal optical flow formulations developed by Horn and Schunck. A four frame model is established and a spatial optical flow is also introduced.

In order to alleviate the problem of the strict requirement of two identical sensors in common stereo imagery a new imaging system is presented in this paper that needs only one camera, two plane mirrors and two switches to generate a phase shifted binocular sequence of …

Simulation Of Voice And Data Integration, Urmila S. Patel

Theses

A simulation model of integrated voice and data is developed. The data packets are transmitted during voice inactivity (i.e. silence duration). A statistical model of voice (talkspurt) and silence duration is generated. inter-arrival time between data packets is modeled using geometrical distribution. The data traffic statistics is simulated for a given voice activity model and various data packet arrival rates. Four important results are obtained by performing this simulation: 1. Average data packet delay versus arrival rate. 2. The optimal ratio of data packet arrival rate to average data packet delay. 3. Probability of wait time for various data packet …

Performance Analysis Of Symbol Timing Recovery Circuits Employed In Digital Communications Systems, Elisha Yegal Bar-Ness

Theses

An analytical approach is presented for the jitter performance of a timing recovery circuit consisting of a prefilter, a zero-memory nonlinear device, and a narrow band postfilter tuned to the pulse repetition frequency. Assuming first a squarer type of nonlinearity, analytical expressions for the rms jitter in the timing wave are obtained as a function of the pre and post filtering characteristics. These expressions are suitable for judging the case where the baseband signal is bandlimited. Also for some specific examples, the jitter performance of this kind of STR circuit is evaluated.

Secondly, a general type of nonlinerity is assumed, …

Modeling Of Vacuum Microelectronic Lateral And Vertical Devices, Qiong Gui

Theses

Vertical and lateral configurations of the vacuum microelectronic device have been modeled using the simulation tools. Both cone and ridge cathode structures are used. Simulation results are compared with experimental data where available. These device structures include cathode, extraction grid, anode, and deflectors. The electric field at the tip of the cathode has been calculated for tip radius as small as 0.1nm. The model used takes into account the effect of potential on all electrodes on the E-field at the cathode tip. Also the effect of cathode geometry on the E-field is detailed.

Static characteristics are based on a new …

Direct Recovering Of Composite Surface Using Uoff, Zhesheng Huang

Theses

The research work reported in the thesis is motivated by the problem raised in the computer vision area. It utilizes direct method to recover surface structure of objects in 3-D space from a pair of stereo images. The direct method, compared with optical flow-based approach and feature-based approach, is robust and computationally efficient. However it can only recover planar surface structure so far. A new approach to recover structure from a pair of stereo images based on unified optical flow field (UOFF) is developed recently. It can recover curved surface structure.

In this thesis, the problem of recovering surface structure …

Workstation Allocation Schemes For Response Time Improvement In A Multiserver Pc Lan, Asit V. Merchant

Theses

Microcomputer Local Area Networks have recently become quite popular. Higher demand in term of number of users who contribute a variable amount of load has led to Multiple File servers in a LAN. As a result of variable load, response time at workstations differ significantly depending not only on total load on the network but also on workstation distribution across servers. The goal of this study is to develop schemes to keep response time as low as possible and constant among workstations. This study is based on minimizing response time and containing it or keeping it constant by distributing workstations …

3-D Structure Recovery Using Unified Optical Flow Field Approach, Anees Ahmad

Theses

Recovery of the 3-D structure that is characterized by an N^th order factorable and/or non-factorable polynomial equation is studied in this thesis. Analytical tools have been employed to analyze and solve the problem. The solution is based on the direct method, which is derived from the unified optical flow field, which, in turn, is an extension of optical flow to spatial image sequences. Least squares formulation has been employed for optimum estimation. The method used does not require the establishment of point to point correspondence, nor the estimation of the optical flow, as an intermediate step.

The theoretical results …

Connected Component Labelling On A Pair Of Parallel Systems, Imran Shahid

Theses

Hypercubes and meshes are of the most successful parallel processing structures and are widely used in image processing applications. The mesh is a natural multiprocessor architecture for image processing because an N x N image can be directly mapped onto a mesh of N x N PEs (processing elements), holding each PE responsible for one pixel, with neighboring PEs responsible for neighboring pixels. Thus, local operations can be performed on the image, or local image features can be detected in parallel, with each processor simultaneously accessing its neighbor and computing the appropriate function for its neighborhood. Meshes and several other …

Androx Implementation Of Nonlinear Filter, Keh-Chao Chu

Theses

Nonlinear filters, such as morphological operations, play an important role in image processing. Several software implementations of nonlinear filters are presented in this thesis. There may exist more than one method to implement a specific operation. The methods used in this thesis are chosen to be most suited for the machine used according to its structure. These most suited methods are also generally best for software implementations on other machines as well. The machine used here is the Androx image computing workstation.

Minimized Test Patterns For Sequential Logic, Chetan Patel

Theses

This thesis presents a novel algorithmic approach which can be used to reduce the total test pattern lengths for testing a sequential logic circuit. Test generation for sequential circuits has long been recognized as a difficult task. Several approaches have been made in the past to solve the problems of test generation stage for sequential circuits but they were either an extension of the classical D-algorithm or based on the random techniques. When number of states of the sequential circuit is larger and the test demands long input sequences, they can be quite ineffective for the test generation. The STALLION …

Synthesis And Characterization Of Boron Nitride Masks For X-Ray Lithography, Venkat Paturi

Theses

Boron nitride thin films were deposited on silicon and fused quartz substrates by low pressure chemical vapor deposition using liquid precursor source consisting of Triethyl amine borane complex over a temperature range of 600-900°C. In the range of 600-800°C, the deposition rate, measured at a constant pressure of 0.35 Torr and flow rate of 30 sccm, was observed to follow an Arrhenius behavior yielding an activation energy of 11 kcal/mol. In the temperature range of 800-900°C, the addition of ammonia to Triethylamineborane complex produced films that are stoichiometric, as estimated by RBS measurements, and hydrogen free as determined by Infrared …

Direct Schottky Injection Image Sensors, Subramanyam V. Ayyagari

Theses

This thesis describes the analysis and simulations of Direct Schottky Injection (DSI) imagers which have 100% fill factor. Frame transfer (FT) and interline transfer (IT) DSI imager structures have been investigated. Theoretical Poisson solution for the PT and P-NP FT-DSI structures is presented, which closely agrees with simulation results. Simulation for frame transfer FT-DSI imagers has been done in SUPREM III since 1-D effects are more dominant. Single carrier transit time for both the structures were estimated from the electric fields.

Simulations of IT-DSI structures was done using PISCES llb, to get the local electric fields, which define the directionality …

Multiresolution Techniques : Laplacian Pyramid Coding And Its Comparison With Subband Coding, Danmei Chang

Theses

The multiresolution pyramid and related structures have been developed as intermediate representations between the purely frequency domain and purely spatial domain. In this thesis. we discuss two important pyramid structures which are often used in multiresolution representation: Laplacian pyramid and subband coding.

Laplacian pyramid. a typical pyramid structure, is studied in detail. By means of software implementation. we obtain a comprehensive understanding of its features and applications in image representation and data compression. Several modifications of pyramid structure are used to compress the data dynamic range, reduce the computational complexity and improve performance. Performance of the conventional Laplacian pyramid and …

Fast Packet Switching For B-Isdn With Neural Net Control, Ajit K. Chaudhuri

Theses

The concept of integrated network where both the voice packet and data packet are delt with, started taking shape since 1970. Later, Users? demand for communication of data, voice, file, facsimile, image, videotext, videophone, videomovie has also been felt. All these services need bit rate of transmission in the order of 10, even 100 Mbits. An economical way to transmit this higher bit rate, with flexibility of bandwidth, is to treat voice/video in the form of packets and transmit those packets in real time. Studies of this kind of communication is carried out in Broadband ISDN ( BISDN). At this …

A Machine Vision System With Remote Host, Chieyeon Jason Chen

Theses

The modem plays an important role in data communication using the Public Swiched Telephone Network. In this thesis, the modem function is merged into a low cost machine vision system based on the Motorola 68HC11. Evalation Board The system comprises the intelligent machine vision con- troller and a remotely located host computer, such as an IBM-PC. It, supports extra long distance communication capability so that the controller and the host can be anywhere in the world where then is a telephone line. Because of the limit of a 2100 bps modem, soft ware data compression is implemented here to save …

Artificial Dielectric Polymeric Optical Waveguides, Peng Chen

Theses

Wave propagation in artificial dielectric polymeric optical thin film waveguides is studied. These artificial dielectric films are made of multiple layers either metallic or semiconductor clusters in polymeric matrix. The waveguides are fabricated using the plasma polymerization and vacuumm evaporation deposition method. By analyzing results of these kinds of structures, some important conclusions can be obtained. The artificial dielectric layer in the waveguide center effectively changes the modal distribution in the waveguides. In the case of semiconductor layer, an all optical switch may be realized.

A Multimode Index Detecting Sensor For Use In Plastic Concrete, Qiyu Chen

Theses

This thesis describes a microcomputer-based measuring system using a laser diode source, a fiber optic sensor and a microcomputer DMA interface to test and analyze the entrained percentage of air in concrete.

The principle of refraction and reflection of light in optical fibers is applied to detection of air bubbles. Reflected light intensity signals are detected and transferred through a DMA interface to a laptop computer. Analysis of reflected light intensity produces a measurement of the air content of fresh concrete. Accuracy of the system is evaluated through extensive laboratory and field trials.

Ct Fan Beam Reconstruction With A Non-Stationary Axis-Of-Rotation, Joseph A. Concepcion

Theses

One important aspect for reconstructing an image using Computed Tomography (CT) is that the axis-of-rotation must pivot at the same point on the reconstruction plane as the x-ray source and CT scanner assembly rotates around the imaged object. This pivot point is used as a reference point for backprojecting pixel values to their proper coordinates. Therefore, reconstructing an image with a non-stationary axis-of-rotation would backproject pixel values to wrong coordinate points, since the reference point is non-stationary for every projection angle.

A convolution filtered backprojection algorithm has been derived for correcting images that were acquired with a non-stationary axis-of-rotation using …

Tri-Color Led Display System Using Microcontroller, Costakis A. Constantinou

Theses

A seven-by-forty-eight tricolor LED display panel is designed and built around the 68HC11 MCU.

Four bilateral switching transistors (4066) are used in a Wien bridge configuration to drive each tri-color LED. With this circuitry one is able to drive the tricolor LED symmetrically. An alternative design that uses only two switching transistors is also offered.

A software program was developed to output on the display scrolling and fixed messages. Each message could be displayed in a different color (Red, Green and Yellow) and at a different speed (Slow, Fast, and Medium). The program also includes an editor with insertion and …

Novel Way Of Sub-Carrier Coherent Detection And Clock Recovery In Fiber-Optic Communications, Narayan Gehlot

Theses

We experimentally demonstrate a novel concept for recovery of a Sub-Carrier and Timing Clock in fiber-optic communication systems using a Wavelength Division Multiplexing technique. The idea is to send a low radio frequency (RF) as a reference pilot from the transmitter to the receiver on a separate laser using the principle of Wavelength Division Multiplexing (WDM). This low frequency signal is taken to be a subharmonic of the subcarrier used to carry information and intensity modulate another laser. Such approach will be expected to generate at the receiver a local oscillator in high coherence with the subcarrier.

We show that …

Uniformity Correction For Infrared Ir-Ccd Camera, Chien-Ming Leng

Theses

This thesis describes the results of a study of three types of uniformity correction schemes for an infrared camera. More specifically, a Datacube Image System was used to simulate the three uniformity correction schemes for a 320x244-element IR-CCD TV camera with PtSi Schottky-barrier detectors. The three uniformity correction schemes are: one-point uniformity correction with single background, one-point uniformity correction with multibackground and two-point uniformity correction. Datacube programs were developed for the three above uniformity correction schemes and some experimental results were obtained.

On The Estimation Of New Life Model Of Transformer Insulation Material Under Combined Electrical And Thermal Stress, Chiming Lin

Theses

Results of combined electrical and thermal aging and only thermal aging studies conducted on a 'fish' paper insulation material are presented in this thesis.

The model for aging has been proposed which is essentially the Arrhenius equation with a weighted factor {exp -cg/kT1 to describe the enhanced reaction rate process under combined thermal and electrical stress. A procedure has been described for evaluation of parameters of this new model.

It is seen that life estimates obtained with this model are close enough to the experimental results.

In addition, reliability data were also generated on the same material using electrical noise. …

The Bandwidth Allocation Of Atm Through Genetic Algorithm, Hong Pan

Theses

In this thesis, we develop an optimization method based on Genetic Algorithm to achieve the bandwidth allocation of ATM network. In Broadband Integrated Service Digital Network (BISDN), the Asynchronous Transfer Model (ATM) is already adopted as the transfer standard by CCITT. ATM is a high-bandwidth, low-delay, fast-packet switching and multiplexing technique. Using ATM technique, we can flexibly reconfigure the network and reassign the bandwidth to meet the requirement of all types of services. As an effective optimization method, Genetic Algorithm(GA) is applied to implement the bandwidth allocation of ATM. GA is a class of search algorithm based on the mechanics …

Dual Token Ring Lan Performance, Pratap S. Pasupuleti

Theses

A simulation model to analyze the performance of a dual token ring LAN is developed. The performance measures throughput, average packet delay and maximum delay per packet are obtained. System performance is analyzed for different loads, number of stations, and packet lengths. The performances of token ring LANs with a conventional structure and a dual ring structure are compared for both uniform packet sizes and a case with mixed packet sizes. In the uniform packet size case, the dual ring delays were lower at equivalent throughput because of propagation delay effects. In the mixed packet size case the maximum delays …

Hot : A Timing Optimizer For Hierarchical Vlsi Circuits Using The Charge Conservation Delay Model, Yumei Quan

Theses

The primary benefits of VLSI chips are their high speed, small area, and lower power. These performance attributes are dependent on the quality of chip design. As a result, performance can be optimized by proper design decisions. One of the decisions in chip design is the selection of gate delays and/or transistor sizes (channel width of an MOS transistor).

To optimize the performance of VLSI chips, transistor delay models and optimization algorithms are very important since accurate analytical models for signal delay are essential to replace expensive device level simulation and the high efficient algorithms assist designers in developing high …

Design, Fabrication, And Testing Of Temperature Compensated Magfet, Dilip K. Sampath

Theses

A simple model based on dc behaviour of MOS transistors operating in weak inversion is derived on the basis of previous publications. The bipolar like source to drain transfer characteristics of MOS transistor in weak inversion was used to implement a voltage source that is proportional to absolute temperature (PTAT); a cell that can be stacked to obtain the desired voltage. A CMOS temperature compensated current reference is implemented using PTAT cell with MOSFET as current defining element. A CMOS magnetic field sensor has been developed. The sensitivity of sensor is dependant on the bias current; incorporation of temperature independent …

An Efficient Annealing Algorithm For Global Optimization In Boltzmann Machines, Rajendra Sarasakrishna

Theses

This thesis proposes a new annealing algorithm for Boltzmann Machines. This algorithm uses an Exponential Formula for temperature scheduling that produces remarkably better solutions for global optimization. The superiority of the new algorithm is shown by computer simulations of several examples on Boltzmann Machine and its variants. This is also shown to have better properties than algorithms like Generalized Simulated Annealing which possess somewhat similar dynamics.

Comparative Study Of Prediction Gain Based On Neural Network Architecture, Prashant M. Shah

Theses

This thesis describes the Neural Network approach to design predictor using Delta and Generalized Delta Rule. The predictor is designed by supervised training based on the typical sequence of pixel values. Neural Network is used to find the coefficients of the predictor. Both 1-D and 2-D scheme of the pixels as well as linear and non-linear correlations are used to find the coefficients by training. Different combinations of pixels are used to find the "best" combination among the order of the predictor.

Efficient Multiprocessor Scheduling By Mean Field Theory Neural Networks, Pei-Ken Yi

Theses

In this thesis, we develop an optimization method based on Mean Field Theory (MFT) Neural Networks to solve the Task Scheduling problem. The MFT algorithm combines characteristics of the Simulated Annealing (SA) algorithm and the Hopfield neural network. MFT exhibits rapid convergence and at the same time it preserves the solution quality afforded by SA. Since MFT has been successfully used to solve the Traveling Salesman Problem (TSP), a new modification to MFT is also presented which supports Task Scheduling problem. The temperature behavior of MFT during Task Scheduling is approximately analyzed and shown to possess a critical temperature (71,) …