Electrical and Electronics Commons^™

Functional Nanoparticles In Thin Films As Sensing Media, Elena A. Guliants, Ryan Schwarb, Hope Bearbower, James R. Gord, Christopher E. Bunker

Electrical and Computer Engineering Faculty Publications

The combination of unique properties offered by materials on the nanoscale with the increased role of surface chemistry in nanostructured solids makes core-shell nanoparticles extremely attractive for application to "smart" thin-film coatings. Sensing properties of nanoparticle-based thin films were studied in several systems containing organic-coated semiconductor and metallic particles. In semiconductors, the interaction of organic shell and/or thin-film "matrix" with the environment results in changes in the nanoparticle's surface states, altering the optical properties of the thin film. Measuring the electrical properties of thin films composed of metallic cores with hydrocarbon shells offers another mechanism to monitor the local environment …

An Explicit Mapping Between The Frequency Domain And The Time Domain Representations Of Nonlinear Systems, Marissa Condon, Rossen Ivanov

Articles

Explicit expressions are presented that describe the input-output behaviour of a nonlinear system in both the frequency and the time domain. The expressions are based on a set of coefficients that do not depend on the input to the system and are universal for a given system. The anharmonic oscillator is chosen as an example and is discussed for different choices of its physical parameters. It is shown that the typical approach for the determination of the Volterra Series representation is not valid for the important case when the nonlinear system exhibits oscillatory behaviour and the input has a pole …

Energy Meter Reading And Tampering Protection Through Powerline Communication Channel, S Naiman

Tanzania Journal of Engineering and Technology (TJET)

POwer utility companies have suffered revenue losses due to uncollected bills and energy tampering for many years. The use of powerline communication to overcome the problems has been proposed. This needs tampering detection and transceivers capable of communicating data through poww•line channel. This paper identifies different methods Of tampering, presents simulated results for tampering detection scheme and proposes a Direct Sequence Spread Spectrum (DSSS) wilh Binary Phase Shift Keying (BPSK) transceiver design for energy metering as a solution to the problem. The choice of DSSS-BPSK modulation scheme is based on its robustness and its ability to spread signal inro wide …

Volume Holographic Recording And Readout For 90-Deg Geometry, Partha P. Banerjee, Monish Ranjan Chatterjee, Nickolai Kukhtarev, Tatiana Kukhtareva

Electrical and Computer Engineering Faculty Publications

When a prerecorded cross-beam hologram is reconstructed (so-called edge-lit readout) with a uniform plane wave and a point source, the resulting exact solutions reveal Bessel-function-type diffracted beam profiles, which are fundamentally modified under weak propagational diffraction. The case of a profiled beam readout with propagational diffraction may be analyzed using a transfer function approach based on 2-D Laplace transforms. In a second series of investigations, dynamic readout from a cross-beam volume hologram recorded with two orthogonal uniform plane waves is considered for various dependences of the refractive index modulation with intensity. Typically, refractive index profiles that are proportional to the …

Volume Holographic Optical Elements, Ching-Cherng Sun, Partha P. Banerjee

Electrical and Computer Engineering Faculty Publications

The final two papers are concerned with the analysis of novel holograms. Banerjee et al. investigate holographic recording and reconstruction for edge-lit holograms recorded in a 90-degree geometry. Various cases of recording and readout that incorporate propagational diffraction have been modeled. It is shown that the 90-degree geometry can result in beam shaping, as evidenced through preliminary experimental results with photorefractive lithium niobate. Nguyen et al. propose a new approach for designing computer-generated holograms. An artificial neural network is used to initiate the genetic algorithm so that the high computation cost of genetic algorithms for synthesizing holograms is significantly reduced …

Review Of The Product Development Process And Information Flow In The Manufacturing Industry: Problems And A Possible Wav Forward, E Opiyo

Tanzania Journal of Engineering and Technology (TJET)

No abstract provided.

Service And Network Modeling For Implementation Of Powerline Remote Monitoring Of Electrical Power Metering In Tanzania, J Anatory

Tanzania Journal of Engineering and Technology (TJET)

The conventional metering. pyepa.vmen,' and estimates have been used in power utilities industries. The svslen,'s hare experienced many problems such as power tampering, bill tampering, ./åiluve ro receive invoices by poner unlity customers and so on. Different technologies have been investigated To overcome the problems and recently it has been realized that remote 'nonitoring sysle•ns through powerline channel is a solution offhese problems in Tanami". However. 'he powerline network has been used for electrical power IO use i,' for implementation of remote monitoring: network must be setup and has to be modeled to accommodate communications. The contribution has analyzed 'he …

A Fast And Simple Algorithm For Computing M-Shortest Paths In State Graph, M. Sherwood, Laxmi P. Gewali, Henry Selvaraj, Venkatesan Muthukumar

Electrical & Computer Engineering Faculty Research

We consider the problem of computing m shortest paths between a source node s and a target node t in a stage graph. Polynomial time algorithms known to solve this problem use complicated data structures. This paper proposes a very simple algorithm for computing all m shortest paths in a stage graph efficiently. The proposed algorithm does not use any complicated data structure and can be implemented in a straightforward way by using only array data structure. This problem appears as a sub-problem for planning risk reduced multiple k-legged trajectories for aerial vehicles.

Examination Of Focused Beam Propagation Through A Finite Non-Reciprocal Planar Chiral Slab Using Complex Fresnel Coefficients And Dual Transforms, Monish Ranjan Chatterjee, Sumit Nema, Partha P. Banerjee

Electrical and Computer Engineering Faculty Publications

Recently, uniform plane wave propagation across a nonchiral-chiral interface was examined via the development of appropriate Fresnel coefficients. In this extension, propagation of focused uniform and profiled beams through a finite, planar nonreciprocal chiral slab is investigated using complex Fresnel coefficients via angular plane wave decomposition and dual transforms.

Revisiting The Fresnel Coefficients For Uniform Plane Wave Propagation Across A Nonchiral, Reciprocal And Chiral, Nonreciprocal Interface, Monish Ranjan Chatterjee, Sumit Nema

Electrical and Computer Engineering Faculty Publications

The problem of EM wave propagation in non-reciprocal chiral media has been studied by several investigators. In a recent approach, a dual-transform technique has been developed to study the problem of such propagation under paraxial and slow-envelope variation conditions.

In this paper, we first outline some of the results obtained using the dual transform technique for arbitrary boundary conditions within the left boundary of a semi-infinite, non-reciprocal chiral medium for a uniform plane wave, and a fundamental Gaussian-profiled beam. Next, we explore the problem of a uniform EM wave incident at an oblique angle at an interface between a reciprocal, …

A Comparative Application Of Telecommunication Traffic Forecasting Methods To A Backbone Link In Tanzania, M. L. Luhanga

Tanzania Journal of Engineering and Technology (TJET)

In this paper various mathematical models to characterize and forecast telecommunication traffic time series traffic have been applied, and the ranges of validity of the models are determined by comparing them with measured traffic data using the measurement errors criteria method which resulted into the superior model. Based on this model the ARIMA (0,2,1) model for smoothed data, the traffic forecast findings show that by the year 2006, the traffic demand will exceed the current installed capacity of 140 Mbps in the Tanzania Telecommunications Company Limited (TTCL) network along the major link between the Dar es Salaam and Dodoma backbone …

Implementation Of A Si/Sic Hybrid Optically Controlled High-Power Switching Device, Prashant Bhadri, Kuntao Ye, Elena A. Guliants, Fred R. Beyette Jr.

Electrical and Computer Engineering Faculty Publications

The ever-increasing performance and economy of operation requirements placed on commercial and military transport aircraft are resulting in very complex systems. As a result, the use of fiber optic component technology has lead to high data throughput, immunity to EMI, reduced certification and maintenance costs and reduced weight features. In particular, in avionic systems, data integrity and high data rates are necessary for stable flight control. Fly-by-Light systems that use optical signals to actuate the flight control surfaces of an aircraft have been suggested as a solution to the EMI problem in avionic systems. Current fly-by-light systems are limited by …

Translation Of 'Balika Badhu: A Selected Anthology Of Bengali Short Stories', Monish Ranjan Chatterjee

Electrical and Computer Engineering Faculty Publications

This project, which began with the desire to render into English a rather long tale by Bimal Kar about five years ago, eventually grew into a considerably more extended compilation of Bengali short stories by 10 of the most well-known practitioners of that art since the heyday of Rabindranath Tagore. The collection is limited in many ways, not the least of which being that no woman writer has been included, and that it contains only a baker's dozen stories (if we count Bonophool's micro-stories collectively as one ) — a number pitifully small considering the vast and prolific field of …

A 0.5 Μm Thick Polysilicon Schottky Diode With Rectification Ratio Of 10^6, Elena A. Guliants, Chunhai Ji, Young J. Song, Wayne A. Anderson

Electrical and Computer Engineering Faculty Publications

Polycrystalline Si films, 0.5-mm thick, were obtained as a result of metal-induced growth by sputtering from a Si target on 25 nm thick Ni prelayers at 525 °C. Silicon grew heteroepitaxially on the NiSi2 layer formed due to the reaction between the sputtered Si atoms and Ni. Schottky diodes were fabricated on the Si films by deposition of a Schottky metal on the front surface of the film while Ni disilicide provided an intimate ohmic contact at the back. A Pd/n-Si diode using an n-Si film annealed for 2 h at 700 °C in forming gas demonstrated a rectification ratio …

Self-Assembly Of Spatially Separated Silicon Structures By Si Heteroepitaxy On Ni Disilicide, Elena A. Guliants, Chunhai Ji, Wayne A. Anderson

Electrical and Computer Engineering Faculty Publications

A nonlithographic approach to produce self-assembled spatially separated Si structures for nanoelectronic applications was developed, employing the metal-induced silicon growth. Densely packed Si whiskers, 500–800 nm thick and up to 2500 nm long, were obtained by magnetron sputtering of Si on a 25 nm thick Ni prelayer at 575 °C. The nucleation of the NiSi2 compound at the Ni–Si interface followed by the Si heteroepitaxy on the lattice-matched NiSi2 is suggested to be the driving force for the whisker formation.

Feedback Correction Of Angular Error In Grating Readout, Monish Ranjan Chatterjee, Sundaram Ramachandran

Electrical and Computer Engineering Faculty Publications

Angular and wavelength READ beam errors in holographic interconnection systems are often a recurrent problem. Several strategies have been proposed to minimize or eliminate such READOUT misalignments.

Some years ago, Chatterjee and co-workers proposed a method involving READ beam wavelength tuning to correct output angular errors. In this paper, we investigate the possibility of using an acousto-optic (A-O) Bragg cell with optoelectronic feedback to dynamically correct the scattered beam for deviations in the incidence direction of the READ beam of a hologram. The concept here is based on an acoustic frequency feedback strategy used recently by Balakshy and Kazaryan for …

Apparatus And Method For Two Stage Hybrid Space-Time Adaptive Processing In Radar And Communication Systems, Todd B. Hale, Michael C. Wicks, Raviraj S. Adve

AFIT Patents

A Two-Stage Hybrid algorithm offers significant improvement in the false alarm rate and detection performance of Space-Time Adaptive Processing in non-homogeneous environments for both radar and digital communications. The first stage analyzes data from a range cell of interest by direct data domain processing, suppressing discrete interferers within the range cell of interest. The second stage implements a purely statistical STAP algorithm, preferably an enhanced version of the Joint-Domain Localized ("JDL") statistical algorithm. For radar this second stage estimates the interference within the range cell of interest from the surrounding range cells. For a communications system, the second stage estimates …

Overview Of Acousto-Optic Bistability, Chaos, And Logical Applications, Monish Ranjan Chatterjee, Erol Sonmez

Electrical and Computer Engineering Faculty Publications

An overview is presented of the key results in the field of acousto-optic bistability in the past two decades. It is shown that the basic acousto-optic bistable device may be described as a nonlinear dynamical system which satisfies a quadratic map. Thereafter, details are presented of several analytical methods, computer modeling approaches, including the SPICE circuit modeling technique, and experiments that have been used to understand the phenomenon.

Extensions to logical and digital applications are also discussed.

Study Of Dynamics And Mechanism Of Metal-Induced Silicon Growth, Elena A. Guliants, Wayne A. Anderson

Electrical and Computer Engineering Faculty Publications

The present study addresses the mechanism of metal-induced growth of device-quality silicon thin films. Si deposition was performed by magnetron sputtering on a 25-nm-thick Ni prelayer at 525–625 °C and yielded a continuous, highly crystalline film with a columnar structure. A Ni disilicide intermediate layer formed as a result of the Ni reaction with Si deposit provides a sufficient site for the Si epitaxial growth because lattice mismatch is small between the two materials. The reaction between Ni and Si was observed to progress in several stages. The NixSiy phase evolution in a Ni:Si layer was studied by x-ray photoelectron …

Rotation-Invariant Synthetic Discriminant Function Filter For Pattern Recognition, Vahid R. Riasati, Partha P. Banerjee, Mustafa A. G. Abushagur, Kenneth B. Howell

Electrical and Computer Engineering Faculty Publications

The ring synthetic discriminant function (RSDF) filter for rotation-invariant response is discussed for pattern recognition. This method uses one half of a slice of the Fourier transform of the object to generate the transfer function of the filter. This is accomplished by rotating the one half of a slice in the Fourier domain through 2π rad about the zero-frequency point of the Fourier plane. This filter has the advantage of always matching at least one half of a slice of the Fourier transform of any rotation of the image. An analytical discussion of the filter construction and correlation results are …

Characterization Of Poly-Si Thin Films Deposited By Magnetron Sputtering Onto Ni Prelayers, Elena A. Guliants, Wayne A. Anderson

Electrical and Computer Engineering Faculty Publications

A method of producing a polycrystalline silicon thin film on a foreign substrate without subsequent annealing has been developed. Thermally evaporated 5–100 nm thick Nifilms served as prelayers for magnetron sputtered Si thin films. A continuous film was obtained as a result of metal induced growth of polysilicon during low temperature (below 600 °C) deposition. The film uniformity is promising for large area device applications. The influence of the Ni prelayer thickness on the grain size of thus obtained films was investigated. Atomic force microscopy and cross-sectional scanning electron microscopy studies revealed features in the 150–600 nm size range while …

Nonlinear Self-Organization In Photorefractive Materials, Partha P. Banerjee, Nickolai Kukhtarev, John O. Dimmock

Electrical and Computer Engineering Faculty Publications

This chapter discusses self-organization and its effects in optics. One of the most exciting and potentially useful areas of current research in optics involves the understanding and exploitation of self-organization in nonlinear optical systems. This self-organization may sometimes lead to the evolution of complex spatial patterns that can be regarded as the nonlinear eigenmodes of the system. Generation of these patterns is characteristically marked by the presence of intensity thresholds. In a nonlinear system with complicated temporal dynamics, it turns out that one cannot retain purity in spatial dimensionality. It is therefore equally important to investigate the dynamics of the …

Application Of Vibrational Techniques In Determination Of Dynamic Properties Of Agricultural Products-State Of The Arton Of Vibrational Techniques In Determination Of Dynamic Properties Of Agricultural Products-State Of The Art, Silas Kajuna

Tanzania Journal of Engineering and Technology (TJET)

Vibration is one of the techniques employed in the determination of dynamic properties of fruits and vegetables. It entails generation of a mechanical or acoustic vibrational signal which is propagated through the flesh of the agricultural material. A transducer is either attached or held close to the specimen to monitor the propagation of the signal through the specimen. The manner in which the signal is transmitted through the material is analyzed, and the dynamic properties of the specimen which relate to its firmness or its internal being are derived. The technique has been around for the past 30 years or …

Guest Editorial: Special Section On Acousto-Optic Devices And Optical Information Processing: Research And Developments, Partha P. Banerjee, Ting-Chung Poon

Electrical and Computer Engineering Faculty Publications

This guest editorial provides an overview of the topical area and an introduction to the articles featured in the special section.

Laser Beam Profile Deformation Effect During Bragg Acousto-Optic Interaction: A Non-Paraxial Approximation, Ray S. Huang, Chen-Wen Tarn, Partha P. Banerjee, Doungchin Cao

Electrical and Computer Engineering Faculty Publications

It is commonly known that the spatial profiles of the diffracted light beams during Bragg acousto-optic interaction are distorted due to the Bragg angle selection mechanism. All the conventional studies on this effect use the paraxial approximation. But this approximation should be amended when the incident angle of the light is large enough that the diffracted light waves do not propagate closely along the optic axis of the acousto-optic diffraction system. By using a spatial Fourier transform approach, we rigorously study the light beam profile deformation effect of the diffracted light during the Bragg acousto-optic interaction beyond the paraxial approximation. …

Examination Of Beam Propagation In Misaligned Holographic Gratings And Comparison With The Acousto-Optic Transfer Function Model For Profiled Beams, Monish Ranjan Chatterjee, David D. Reagan

Electrical and Computer Engineering Faculty Publications

A transfer function formalism developed earlier for the propagation of profiled optical beams through acousto-optic Bragg cells is revisited and applied to a thick holographic grating. The results based on the holographic coupled wave model and the acousto-optic multiple scattering model are shown to be compatible, and equivalent parameters such as the Q and grating strength are defined for the two systems. Results for a Gaussian spatial profile are numerically computed and compared. For the holographic grating, a profiled beam may be interpreted as an angular misalignment or Bragg-angle mismatch problem. The case of Bragg-wavelength mismatch is also investigated for …

Self-Enhancement Of Dynamic Gratings In Photogalvanic Crystals, Nickolai Kukhtarev, Sergei F. Lyuksyutov, Preben Buchhave, Tatiana Kukhtareva, K. Sayano, Partha P. Banerjee

Electrical and Computer Engineering Faculty Publications

We have developed a compact closed-form solution of the band transport model for high-contrast gratings in photogalvanic crystals. Our solution predicts the effect of the photoconductivity and the electric field grating enhancement due to the photogalvanic effect. We predict a pronounced dependence of the steady-state photogalvanic current on the contrast of the interference pattern and an increase of holographic storage time due to the enhancement of the photoconductivity grating contrast. In the high contrast limit and a large photogalvanic effect the refractive index grating will be shifted from the position of the intensity modulation pattern, contrary to the usually adopted …

Experimental Investigations Of Wavelength And Angular Errors In Holographic Gratings With Non-Bragg-Matched Read Beams, Monish Ranjan Chatterjee, Vivek Ray

Electrical and Computer Engineering Faculty Publications

Perfect Bragg matching is generally desirable for accurate optical interconnections with holographic gratings. In reality, however, gratings may be illuminated by READ beams with non-Bragg-matched angles, or wavelengths, or both. In such cases, the scattered beams are generally misdirected, and may suffer loss of efficiency and possibly more serious errors such as crosstalk noise or missed connections. A conventional wave-vector triad method of analyzing the scattered beam errors leads readily to near-Bragg estimates of the output angular misalignment. However, the READ wave-vector triads appear to indicate a possible wavelength shift in the output beam even with a Bragg-matched READ wavelength, …

Attitude Measurement, Mark A. Stedham, Partha P. Banerjee, Seiji Nishifuji, Shogo Tanaka

Electrical and Computer Engineering Faculty Publications

In many practical situations, it is important to determine and measure the attitude of a particular vehicle, such as a ship, an airplane, a piece of mechanical equipment such as a, crane lifter, or a spacecraft. For this reason, many attitude sensors have been developed with advanced computer and semiconductor technologies. This section first introduces the various attitude sensors with an explanation of their operating principles and then presents several methodologies for attitude measurement and determination, including ships and crane lifters, aircraft, and spacecraft applications.

Translation Of 'Profiles In Faith', Monish Ranjan Chatterjee

Electrical and Computer Engineering Faculty Publications

Sarat Chandra Chatterjee (1876-1938) may be considered one of the three most significant figures of the literary component of the Bengal Renaissance, the other two being Bankim Chandra Chatterjee (1838-1894) and Rabindranath Tagore (1861-1941). As much as Bankim Chandra is identified with the new age in the Bengali novel, and the development of serious vernacular journalism, and Rabindranath with modern/classical movements in Bengali poetry and music, along with novel ideas in methods of education and teaching, Sarat Chandra, as a novelist and storyteller, perfected the art of narration and critical analyses of a variety of contemporaneous social and political issues, …