Electrical and Electronics Commons^™

Harvesting Single Ferroelectric Domain Stressed Nanoparticles For Optical And Ferroic Applications, Gary Cook, J. L. Barnes, S. A. Basun, Dean R. Evans, Ron F. Ziolo, Arturo Ponce, Victor Yu. Reshetnyak, Anatoliy Glushchenko, Partha P. Banerjee

Electrical and Computer Engineering Faculty Publications

We describe techniques to selectively harvest single ferroelectric domain nanoparticles of BaTiO3 as small as 9 nm from a plethora of nanoparticles produced by mechanical grinding. High resolution transmission electron microscopy imaging shows the unidomain atomic structure of the nanoparticles and reveals compressive and tensile surface strains which are attributed to the preservation of ferroelectric behavior in these particles.

We demonstrate the positive benefits of using harvested nanoparticles in disparate liquid crystal systems.

Characterization Of Atmospheric Turbulence Effects Over 149 Km Propagation Path Using Multi-Wavelength Laser Beacons, Mikhail Vorontsov, Gary W. Carhart, Venkata S. Rao Gudimetla, Thomas Weyrauch, Eric Stevenson, Svetlana Lachinova, Leonid A. Beresnev, Jony Jiang Liu, Karl Rehder, Jim F. Riker

Electrical and Computer Engineering Faculty Publications

We describe preliminary results of a set of laser beam propagation experiments performed over a long (149 km) near-horizontal propagation path between Mauna Loa (Hawaii Island) and Haleakala (Island of Maui) mountains in February 2010. The distinctive feature of the experimental campaign referred to here as the Coherent Multi-Beam Atmospheric Transceiver (COMBAT) experiments is that the measurements of the atmospheric-turbulence induced laser beam intensity scintillations at the receiver telescope aperture were obtained simultaneously using three laser sources (laser beacons) with different wavelengths (λ1 = 0.53 μm, λ2 = 1.06 μm, and λ3 = 1.55 μm). The presented experimental results on …

Automated Basketball Return System, Victor Mendoza, Chris Chamberlain

Electrical Engineering

The project is meant to assist a basketball player in their practicing. The project hangs directly on the basketball rim and automatically rotates to find the player on the court. Once the player is detected, the automated basketball return system (ABRS) stays focused in the direction of the player so that any baskets successfully made will be funneled back to the player. When the player moves from center, IR motion detectors find which direction you moved to and rotates accordingly, until the player is focused in front of the funnel again. If at any time the player is absent from …

Design Of Acousto-Optic Chaos Based Secure Free-Space Optical Communication Links, Anjan K. Ghosh, Pramode K. Verma, Samuel Cheng, Robert C. Huck, Monish Ranjan Chatterjee, Mohammed A. Al-Saedi

Electrical and Computer Engineering Faculty Publications

We discuss the design of an acousto-optic cell based free space optical communication link where the data beam is made secure through chaos encryption. Using external signal modulation of the diffracted light from a hybrid acousto-optic cell chaos (or directly via incorporation in the sound-cell driver's bias voltage) encryption of data is possible. We have shown numerically that decryption of the encoded data is possible by using an identical acousto-optic system in the receiver.

System Identification Of An On Orbit Spacecraft's Antenna Dynamics, Christopher M. Sylvester

Theses and Dissertations

As a result of previous efforts [Pachter, Barba, 2007] a tight control loop was designed to meet performance specifications while minimizing the feedback control system’s gains of a spacecraft mounted flexible antenna. Emphasis is now shifted to on orbit system identification of the antenna dynamics in order to increase nominal plant knowledge, estimate plant uncertainty bounds, as well as determine the disturbance band. Non-parametric system identification is undertaken. Knowledge of the plant dynamics along with the corresponding uncertainty bounds will provide for the design of a control system which meets the specifications (tracking and disturbance rejection) while at the same …

A Graph-Based Approach To Symbolic Functional Decomposition Of Finite State Machines, Piotr Szotkowski, Mariusz Rawski, Henry Selvaraj

Electrical & Computer Engineering Faculty Research

This paper discusses the symbolic functional decomposition method for implementing finite state machines in field-programmable gate array devices. This method is a viable alternative to the presently widespread two-step approaches to the problem, which consist of separate encoding and mapping stages; the proposed method does not have a separate decomposition step instead, the state's final encoding is introduced gradually on every decomposition iteration. Along with general description of the functional symbolic decomposition method's steps, the paper discusses various algorithms implementing the method and presents an example realisation of the most interesting algorithm. In the end, the paper compares the results …

Low Power Fft Processor Design Considerations For Ofdm Communications, David Layne Rushforth

UNLV Theses, Dissertations, Professional Papers, and Capstones

Today's emerging communication technologies require fast processing as well as efficient use of resources. This project specifically addresses the power-efficient design of an FFT processor as it relates to OFDM communications such as cognitive radio. The Fast Fourier Transform (FFT) processor is what enables the efficient modulation in OFDM. As the FFT processor is the most computationally intensive component in OFDM communication, the power efficiency improvement of this component can have great impacts on the overall system. These impacts are significant considering the number of mobile and remote communication devices that rely on limited battery-powered operation. This project explores current …

Implementation Of Collaborative Rf Localization Using A Software-Defined Radio Network, Augustine A. Honore

Theses and Dissertations

This thesis investigates the use of collaboration between sensor nodes that were tasked with localizing a radio frequency emitter. Localization is a necessary component for dynamic spectrum access. Using a set of software-defined radios as our sensors and a received signal strength-based maximum likelihood localization algorithm, we successfully localized transmitting nodes based on their received signal strength. Our experiment was conducted outdoors using a flexible topology that could be shaped into 21 sub-topologies that varied in size, and orientation with respect to the transmitters. This was made possible through application of a time shift concept and a post-processing technique. We …

Rf Mems Capacitors For Sdr, Yamuna Kuberappa

Theses

Micro electro mechanical systems (MEMS) applications in radio frequency (RF) and microwave electronics are revolutionizing the progress in wireless communications. In particular, MEMS switchable/tunable capacitors can facilitate the realization of multistandard software defined transceivers, offering better performance than existing solutions.

In this thesis, characterisation and RF modelling of MEMS switchable/tunable capacitors and the technical requirements for their application in multiband wireless transceiver circuits in a software defined radio (SDR) are described. The first device considered is a curled cantilever capacitive switch, configured in both shunt and series configuration where the capacitance is limited to two stable states. The second device, …

Effects Of Lline Rate On Vvideo Qos Over Wireless Networks: An Experimental Approach, Stuart Wallace, Mark Davis

Conference papers

Video streaming over Wireless Local Area Networks (WLANS) is becoming an increasingly popular service. However, end user OoS is highly influenced by many factors. These include the video codec used, the packetization scheme, error concealment and correction techniques, the complexity of the video, propagation losses, and the line rate. In this paper the effect of the line rate on the capacity of the network when streaming multimedia content is analyzed experimentally. It is shown that as the line rate decreases the bandwidth load of the video stream dramatically increases leading to poor QoS at the client side. As automatic line …

Inhibition Of Linear Absorption In Opaque Materials Using Phase-Locked Harmonic Generation, Marco Centini, Vito Roppo, Eugenio Fazio, Federico Pettazzi, Concita Sibilia, Joseph W. Haus, John V. Foreman, Neset Akozbek, Mark J. Bloemer, Michael Scalora

Electrical and Computer Engineering Faculty Publications

We theoretically predict and experimentally demonstrate inhibition of linear absorption for phase and group velocity mismatched second- and third-harmonic generation in strongly absorbing materials, GaAs, in particular, at frequencies above the absorption edge.

A 100-fs pump pulse tuned to 1300 nm generates 650 and 435 nm second- and third-harmonic pulses that propagate across a 450−μm-thick GaAs substrate without being absorbed.

We attribute this to a phase-locking mechanism that causes the pump to trap the harmonics and to impress on them its dispersive properties.

Significance Of Logic Synthesis In Fpga-Based Design Of Image And Signal Processing Systems, Mariusz Rawski, Henry Selvaraj, Bogdan J. Falkowski, Tadeusz Luba

Electrical & Computer Engineering Faculty Research

This chapter, taking FIR filters as an example, presents the discussion on efficiency of different implementation methodologies of DSP algorithms targeting modern FPGA architectures. Nowadays, programmable technology provides the possibility to implement digital systems with the use of specialized embedded DSP blocks. However, this technology gives the designer the possibility to increase efficiency of designed systems by exploitation of parallelisms of implemented algorithms. Moreover, it is possible to apply special techniques, such as distributed arithmetic (DA). Since in this approach, general-purpose multipliers are replaced by combinational LUT blocks, it is possible to construct digital filters of very high performance. Additionally, …

Modeling And Characterization Of Adaptive Lanthanum-Modified Lead Zirconate Titanate (Plzt) Microlenses, Yasser A. Abdelaziez, Partha P. Banerjee

Electrical and Computer Engineering Faculty Publications

We report the modeling and characterization of adaptive voltage controlled electro-optic microlenses. First, we utilize finite element analysis (FEA) to simulate the induced electro-optic effect in lanthanum-modified lead zirconate titanate (PLZT). FEA simulation provides microlens parameters such as phase and focal length. A simple z-scan method is developed to fully characterize the adaptive voltage controlled linear lens. Experimental z-scan results are shown to match the theoretical predictions from FEA.

Tailoring Metallodielectric Structures For Superresolution And Superguiding Applications In The Visible And Near-Ir Ranges, Domenico De Ceglia, Maria Antonietta Vincenti, M. G. Cappeddu, Marco Centini, Neset Akozbek, Antonella D'Orazio, Joseph W. Haus, Mark J. Bloemer, Michael Scalora

Electrical and Computer Engineering Faculty Publications

We discuss propagation effects in realistic, transparent, metallodielectric photonic band gap structures in the context of negative refraction and super-resolution in the visible and near infrared ranges. In the resonance tunneling regime, we find that for transverse-magnetic incident polarization, field localization effects contribute to a waveguiding phenomenon that makes it possible for the light to remain confined within a small fraction of a wavelength, without any transverse boundaries, due to the suppression of diffraction. This effect is related to negative refraction of the Poynting vector inside each metal layer, balanced by normal refraction inside the adjacent dielectric layer: The degree …

Throughput Enhancement Through Combined Fragmentation And Rate Method In Ieee 802.11b Wlans, Marek Bykowski, Karol Kowalik, Brian Keegan, Mark Davis

Conference papers

IEEE 802.11 allows for fragmentation tuning and rate selection. Their combined usage is referred sometimes to link adaptation. However, the algorithms of link adaptation are beyond the 802.11 standards. In this paper we investigate the benefits arising from proper use of link adaptation. Particularly, we develop a mathematical model describing the fragmented transmission in 802.11b. We examine potential benefits of it over AWGN and fading channels. More significantly we combine fragmentation tuning with bit-rate selection to yield the highest achievable throughput performance for any given channel conditions. Finally, we propose an algorithm that performs the optimal link adaptation.

Drop Photometer Design., Kevin Tiernan

Doctoral

The tensiograph drop analyser, operating in the mode of ultraviolet-visual absorption photometer, was re-engineered to improve measurement accuracy. As well as instrumentation re-design, the other objective of the research was to analyse tensiograph signals to explore how their features are defined by drop properties. Using fibre optic technology, the tensiograph emits a light beam into a growing pendant drop whereupon it undergoes a number of internal reflections. A portion of the reflected light energy is coupled to a photodiode producing a proportional current that is electronically processed and transferred to a computer for analysis. The signal produced, known as the …

Kilovolt Blumlein Pulse Generator With Variable Pulse Duration And Polarity, Andrea De Angelis, Juergen F. Kolb, Luigi Zeni, Karl H. Schoenbach

Bioelectrics Publications

A Blumlein pulse generator which utilizes the superposition of electrical pulses launched from two individually switched pulse forming lines has been designed and tested. By using a power metal-oxide-semiconductor field-effect transistor as a switch on each end of the Blumlein line, we were able to generate pulses with amplitudes of 1kV across a 100Ω load. Pulse duration and polarity can be controlled by the temporal delay in the triggering of the two switches. Using this technique, we have demonstrated the generation of pulses with durations between 8 and 60ns. The lower limit in pulse duration was determined by the switch …

Mesh Mac Enabling Mesh Networking Over Ieee 802.15.4 Mac Layer, Panneer Selvan Muthukumaran

Theses

Wireless sensor network is a network of sensor nodes that function in a cooperative manner to monitor the changes in the physical environment. Wireless sensor networks are used in environment and habitat monitoring, healthcare applications, building automation, and traffic control to name a few. Typically, wireless sensor node is a low power embedded device which consists of a microcontroller, sensors, wireless transceiver and a battery. These devices are usually distributed in a physical environment which makes it difficult to maintain the network manually.

The IEEE 802.15.4 and Zigbee are considered as standard protocols for wireless sensor networks. The IEEE 802.15.4 …

A Distributed Ai Approach For Large-Scale Wlan Design, Alan Mcgibney

Theses

The recent dramatic trend towards always-on-connectivity has driven the need for mobile ubiquitous computing environments with the advent of the Wireless Local Area Network (WLAN) seeing a shift from traditional wired networks to wireless networking. A WLAN typically contains a number of access points that allow wireless enabled clients access information and network resources such as the internet without the need for wires, offering flexibility and mobility to the users. Initial wireless networks were convenience based allowing users access to the primary wired network, and involved little planning prior to roll-out. The proliferation of low cost wireless devices combined wdth …

Examination Of Energy And Group Velocities In Positive And Negative Index Chiral Materials With And Without Dispersion, Monish Ranjan Chatterjee, Partha P. Banerjee

Electrical and Computer Engineering Faculty Publications

Concepts of energy and group velocities, Poynting and propagation vectors are examined for both positive and negative index materials. Known definitions for these entities are explored in terms of the interplay of chirality and dispersion.

Analysis Of Beam Propagation In 90-Degree Holographic Recording And Readout Using Transfer Functions And Numerical 2-D-Laplace Inversion, Monish Ranjan Chatterjee, Partha P. Banerjee, George Nehmetallah

Electrical and Computer Engineering Faculty Publications

Recently, 2-D-Laplace analysis of recording and readout of edge-holograms was reported. Numerical Laplace inversion was examined for simple test cases. Inversion algorithms are applied to examine beam shaping and distortion in photovoltaic and photorefractive materials.

Study Of Soliton Stabilization In D+1 Dimensions Using Novel Analytical And Numerical Techniques, George Nehmetallah, Partha P. Banerjee

Electrical and Computer Engineering Faculty Publications

In this Chapter, we provide a brief review of the underlying nonlinear Schrödinger and associated equations that model spatio-temporal propagation in one and higher dimensions in a nonlinear dispersive environment. Particular attention is given to fast adaptive numerical techniques to solve such equations, and in the presence of dispersion and nonlinearity management, saturating nonlinearity and nonparaxiality. A unique variational approach is also outlined which helps in determining the ranges of nonlinearity and dispersion parameters to ensure stable solutions of the nonlinear equations. The propagation of 3+1 dimensional spatio-temporal pulses, or optical bullets is also modeled using a fast adaptive split-step …

Atmospheric Turbulence Compensation Of Point Source Images Using Asynchronous Stochastic Parallel Gradient Descent Technique On Amos 3.6 M Telescope, Mikhail Vorontsov, Jim F. Riker, Gary W. Carhart, Venkata S. Rao Gudimetla, Leonid A. Beresnev, Thomas Weyrauch

Electrical and Computer Engineering Faculty Publications

The Stochastic Parallel Gradient Descent Technique-based Adaptive Optics (SPGD-AO) system described in this presentation does not use a conventional wavefront sensor. It uses a metric signal collected by a single pixel detector placed behind a pinhole in the image plane to drive three deformable mirrors (DMs). The system is designed to compensate the image for turbulence effects. The theory behind this method is described in detail in [1]. However this technique, while widely simulated and tested in the laboratory, was not yet verified in astronomical field site experiments. During the month of May 2007, a series of experiments with SPGD-AO …

Adaptive Optics Performance Over Long Horizontal Paths: Aperture Effects In Multi-Conjugate Adaptive Optical Systems, Miao Yu, Mikhail Vorontsov, Svetlana Lachinova, Jim F. Riker, Venkata S. Rao Gudimetla

Electrical and Computer Engineering Faculty Publications

We analyze various scenarios of the aperture effects in adaptive optical receiver-type systems when inhomogeneities of the wave propagation medium are distributed over long horizontal propagation path, or localized in a few thin layers remotely located from the receiver telescope pupil. Phase aberration compensation is performed using closed-loop control architectures based on phase conjugation and decoupled stochastic parallel gradient descent (DSPGD) control algorithms. Both receiver system aperture diffraction effects and the impact of wave-front corrector position on phase aberration compensation efficiency are analyzed for adaptive systems with single or multiple wave-front correctors.

A Service Provisioning Platform For Beyond 3g - The Telecommunication Service Exchange, Donna Griffin

Theses

From the inception of mobile communications one of the most important factors contributing to its success has been a good understanding of user requirements. In the first generation, mobile networks offered subscribers the freedom to communicate regardless of their locations and the joy of instant access to voice telephony services. This provided a competitive edge over wire line communication networks and resulted in large revenue streams. However over the past decade, mobile network operators have been faced with a number of factors that have incurred significant costs and resulting reduced revenue. These factors include deregulation, increased competition and technological progress …

Investigation Of Negative Refractive Index In Reciprocal Chiral Materials, Monish Ranjan Chatterjee, Partha P. Banerjee, Pradeep R. Anugula

Electrical and Computer Engineering Faculty Publications

It is well known that there exist both natural materials (such as milk or sugar solution) possessing chiral (or handed) properties, as well as an increasing list of man-made materials (such as sodium bromate) that exhibit chirality. One of the principal properties of chirality is that light of any arbitrary polarization, when propagating through a chiral material, splits up into two circular polarizations propagating in different directions. In the past decade or longer, researchers have investigated electromagnetic transverse (plane) wave propagation across a non-chiral/chiral interface, and determined the electromagnetic Fresnel coefficients for such propagation. Traditionally, such coefficients are derived under …

Socio-Economic Impacts Of Computer Viruses In Tanzania, M Victor

Tanzania Journal of Engineering and Technology (TJET)

This paper reports on a research project conducted with an objective of identifying and assessing various approaches used by different computer users (Management, System Administrators and end users) in Tanzania to combat computer viruses (CVs), and to assess users' awareness level on CVs. Specifically, the study aimed at assessing the awareness level on CVs to the Tanzanian business community; analyze the socio -economic impact caused by CVs in Tanzania and; assess existing methods, capacity and limitations on controlling CVs in Tanzania. Data was collected using both questionnaires and interview from financial institutions such as NBC and BOT, and telecommunications sector …

Pocket Deformable Mirror For Adaptive Optics Applications, Leonid A. Beresnev, Mikhail Vorontsov, Peter Wangsness

Electrical and Computer Engineering Faculty Publications

Adaptive/active optical elements are designed to improve optical system performance in the presence of phase aberrations. For atmospheric optics and astronomical applications, an ideal deformable mirror should have sufficient frequency bandwidth for compensation of fast changing wave front aberrations induced by either atmospheric turbulences or by turbulent air flows surrounding a flying object (air optical effects). In many applications, such as atmospheric target tracking, remote sensing from flying aircraft, boundary layer imaging, laser communication and laser beam projection over near horizontal propagation paths the phase aberration frequency bandwidth can exceed several kHz. These fast-changing aberrations are currently compensated using relatively …

Adaptive Beam Director For A Tiled Fiber Array, Mikhail Vorontsov, Jim F. Riker, Ernst Polnau, Svetlana Lachinova, Venkata S. Rao Gudimetla

Electrical and Computer Engineering Faculty Publications

We present the concept development of a novel atmospheric compensation system based on adaptive tiled fiber array architecture operating with target-in-the-loop scenarios for directed beam applications. The adaptive tiled fiber array system is integrated with adaptive beam director (ABD). Wavefront control and sensing functions are performed directly on the beam director telescope primary mirror. The beam control of the adaptive tiled fiber array aims to compensate atmospheric turbulence-induced dynamic phase aberrations and results in a corresponding brightness increase on the illuminated extended object. The system is specifically designed for tiled fiber system architectures operating in strong intensity scintillation and speckle-modulation …

Signal Flow Analysis, Partha P. Banerjee

Electrical and Computer Engineering Faculty Publications

Signal flow graphs are a viable alternative to block diagrammatic representation of a system. What makes signal flow graphs attractive is that certain features from graph theory can be applied to the simplification and the synthesis of complex systems.