Controls and Control Theory Commons^™

The Importance Of The Analog-To-Digital Converter In The Measurement System, Aliev Ravshan, Anvar Djalilov

Chemical Technology, Control and Management

At the moment, many scientific researches are being conducted all over the world on the economical use of water and energy resources. Most of the scientific research works are aimed at improving measurement techniques and technologies, that is, increasing their accuracy. With this in mind, a high-precision analog-to-digital converter due to its unique metrological and technical characteristics was studied in this research paper. As a result of the study, it became clear that the use of a small-sized, high-precision sigma-delta analog-to-digital converter in modern measuring technology has a positive effect on its accurate and efficient operation.

Framework For Multi-Agent Coordination And Distributed Localization In Micro-Uavs, Minwoo Park, Nikolas Tambornini

Electrical Engineering

Micro-UAVs (unmanned aerial vehicles) due to their inexpensive nature and compact form factor have shown an increase in prevalence throughout a multitude of applications including, but not limited to: search and rescue, military reconnaissance, and agriculture monitoring. However, for a majority of these high impact applications, a swarm of micro-UAVs are required and furthermore mandate that they are able to cooperatively and autonomously coordinate with each other. For long, controlling and communicating between a user and a singular micro-UAV has been a well known and solved problem, however the same can't be said for swarms of micro-UAVs. This project seeks …

A Turtlebot3 Hardware Testbed For Distributed Kalman Filter Localization, Dmitri Dobrynin, Indigo T. Garcia

Electrical Engineering

This report presents the preliminary design for a distributed localization framework for a multi-robot system. Many robotics research papers provide simulations of proposed algorithms in regards to formation control and task allocation. However, it is often that these proposals are without hardware experiments, being limited only to simulation. The objective of this framework is to provide a hardware implementation of a distributed Kalman filtering algorithm for multi-agent localization, as well as provide grounds for future multi-agent experiments. The framework is implemented on a swarm of three Turtlebot3 mobile robots. The robots can accurately localize themselves with respect to other agents …

Distributed Formation Control Of Nonholonomic Mobile Robots: Safety-Critical Leader-Follower Approach With Obstacle Avoidance And Dynamic Reconfiguration, Kelvin C. Villago

Master's Theses

Networked control systems for multi-agent robotics have emerged as a critical paradigm for executing complex coordinated tasks in diverse environments. While formation control serves as the backbone of such systems, real-world deployment introduces significant challenges including communication constraints, environmental obstacles, and the need for adaptive reconfiguration. This research addresses these challenges by developing a novel unified framework that seamlessly integrates obstacle avoidance algorithms with dynamic formation reconfiguration capabilities, specifically designed for communication-limited networked control architectures. The proposed framework represents a significant advancement over existing approaches by simultaneously handling both static and dynamic obstacles while maintaining system cohesion under communication constraints. …

Gamified Gait Rehabilitation Via Real-Time Biofeedback And Adaptive Hip-Exoskeleton Control, Mariya Huzaifa Tohfafarosh

Theses

Gait impairments arise from systemic diseases, age-related degeneration, musculoskeletal dysfunctions, or neurological conditions. While traditional rehabilitation can be effective, they often face challenges such as high costs, inaccessibility, and low patient engagement. To address these challenges, my work introduces a virtual reality-based rehabilitation (VRBR) system, integrating real-time motion and electromyographic (EMG) muscle activation feedback with a gamified virtual environment for enhanced adaptability and engagement. The system includes a custom-designed hip-exoskeleton that provides adaptive spring-like assistance or resistance, supporting both mobility-impaired users and strength training. Assistance levels can be tuned to match the user's progress. Additionally, a custom pressure insole was …

Transfer Learning For Temporal Logic Objectives, Lucas M. Santana Rovira

McKelvey School of Engineering Graduate Student Theses & Dissertations

Reinforcement learning algorithms can enable autonomous systems to learn the control skills needed to accomplish a task specified by a linear temporal logic formula. However, they cannot be transferred to a new task, even when the two are very similar. For each new task, the policy must be redesigned from scratch, which is a common limitation of existing reinforcement learning methods for temporal logic tasks. A proposed solution to this problem leverages the similarity between past and new tasks to reuse already learned control skills to accomplish the new task, with minimal or no retraining.

Rather than learning a single …

Modeling Of Analog-To-Digital Converter In Signal Processing, Ravshan Aliev, A.U. Djalilov

Chemical Technology, Control and Management

This article is devoted to the study of the modeling process of analog-to-digital converters (ADCs) that process signals, one of the main parts of control system elements and devices. As we know, ADCs are an important part of modern control systems. During the research, the main stages of analog signal conversion were analyzed, i.e. discretization, quantization, coding. A classification of analog-to-digital conversion methods was made and the advantages and disadvantages of each were identified. Also, the characteristics and parameters of ADC were studied, their impact on ADCs performance was evaluated, and it was determined that certain characteristics should be taken …

Integrating Neural Networks For Predictive Torque Control And Obstacle Avoidance In Autonomous Robot, Viswanath Kodali, Harsha Vardhan Borra, Kiran P

Northeast Journal of Complex Systems (NEJCS)

In the field of robotics, precise motion control and accurate computation of joint forces are critical for ensuring optimal performance. Traditional methods, such as using the Jacobian matrix for joint angle determination and Euler-Lagrange equations for torque computation, are reliable but computationally intensive, making them less suitable for real-time applications. This paper presents an advanced approach to improving the productivity and efficiency of a 3-Degree of Freedom (DOF) robotic arm by utilizing Artificial Neural Network (ANN). The proposed system dynamically predicts joint angles and torque, enabling faster and more efficient motion control.

To address the challenge of obstacle avoidance in …

Advancing Prosthetic Technology: 3d-Printed Robotic Arm With Micro Linear Actuators, Vu Tran, Nathan Reed, Mahdi Yazdanpour

Posters-at-the-Capitol

The increasing demand for affordable and accessible prosthetic solutions has driven innovation in the field of robotics. In this project, we present the design and development of a 3D-printed robotic prosthetic arm aimed at addressing the challenges faced by individuals with upper limb amputations. Our prosthetic arm utilizes five micro linear actuators to achieve precise and naturalistic movement. The design of the prosthetic arm prioritizes affordability and accessibility, with a focus on leveraging 3D printing technology to reduce manufacturing costs and enable customization. The use of micro linear actuators offers advantages in terms of compactness, lightweight construction, and efficient power …

3d Perception, Mapping, And Navigation For Mobile Cobot, Tuan T. Dang

Computer Science and Engineering Dissertations - Archive

Service robots are migrating from tightly controlled factory lines into offices, hospitals, and homes, where they must perceive, remember, and act amid people, clutter, and perpetual change. Humans solve this daily by forming compact, task-relevant “cognitive maps”: we sample just enough sensory detail to guide the moment, stitch those snapshots into a sparse topological scaffold, and continuously refine it as we move. Guided by that insight, this dissertation proposes a biologically inspired mapping framework that turns partial RGB-D observations into a hybrid temporal-spatial memory—locally metric for centimeter-scale navigation yet globally topological for room-to-building navigation. The system first distills raw depth …

Model Reference Adaptive Control For Mobile Manipulators And Beyond, Srivatsan Srinivasan

All Dissertations

In recent years, robotics has expanded into various sectors, including manufacturing, transportation, and household services, making the integration of autonomy a critical area of research. This shift aims to ensure safety and enhance the utility of autonomous systems. Traditionally, robotic applications focused separately on mobility, like automated guided vehicles, and manipulation, such as serial-chain arms in manufacturing. Today, however, we see a merging of these capabilities in the growing field of mobile manipulator robots that combine movement with purposeful interactive functionalities.

A typical mobile manipulator is a robotic arm mounted on a wheeled base. This thesis focuses on advancing control …

Model-Based Navigation And Control Of Multirotor Uavs: A Machine Learning Approach, Serhat Sönmez

Electronic Theses and Dissertations

In recent decades, unmanned systems, particularly Unmanned Aerial Vehicles (UAVs), have seen significant advancement and unprecedented growth in military, civilian and public domain applications. Scientists have focused on enhancing UAV navigation and control through cutting-edge technologies and support tools. UAVs find applications in many fields, except military, such as agriculture, infrastructure inspection, wildlife monitoring, search and rescue, emergency response, border protection, to name but a few relevant civilian applications. Given the faster-than-exponential increase of available computational power, learning-based algorithms have emerged as a prominent tool for (real-time) multirotor UAV navigation and control. This dissertation centers around the fusion of conventional …

Review Of Fuzzy Models And Fuzzy Methods For Analysis Of Information In Conditions Of Emotional Decision Making, Latafat Gardashova, Royal Shirinov, Diana Boqdanova

Chemical Technology, Control and Management

In the modern world, decision-making often takes place in an environment of uncertainty and under the significant influence of emotional factors, which requires the use of special methods for analyzing information. This study is devoted to an overview of fuzzy models and methods that allow such factors to be taken into account when making decisions. In particular, the approaches based on fuzzy logic, fuzzy cognitive maps and fuzzy clustering methods that provide flexibility and adaptability in conditions of uncertainty are considered. The study analyzes examples of the application of these methods in various fields, including risk management, medical diagnostics and …

Koopman-Based Modeling For Nonlinear Control Of Multirotor Uavs, Simone Martini

Electronic Theses and Dissertations

This PhD dissertation focuses on adopting the emerging Koopman Operator theory for modeling and nonlinear control of multirotor UAVs, focusing specifically on quadrotors for proof-of-concept demonstration purposes.

The Koopman Operator theory is based on the foundation that nonlinear dynamics in the state space may be represented as a linear evolution of some functions in the state space. Thus, using appropriately defined and possibly nonlinear functions of the state variables, called observables, as a new and maybe infinite set of coordinates that are referred to as lifted space, the original nonlinear dynamics appear to be linear. The implications of this theory …

Convex Approach To Data-Driven Optimal Control With Safety Constraints Using Linear Transfer Operator, Joseph Raphel Moyalan

All Dissertations

This thesis is concerned with the data-driven solution to the optimal control problem with safety constraints for a class of control-affine nonlinear systems. Designing optimal control satisfying safety constraints is a problem of interest in various applications, including robotics, power systems, transportation networks, and manufacturing. This problem is known to be non-convex. One of this thesis's main contributions is providing a convex formulation to this non-convex problem. The second main contribution is providing a data-driven framework for solving the control problem with safety constraints. The linear operator theoretic framework involving Perron-Frobenius and Koopman operators provides the convex formulation and associated …

Training Uav Teams With Multi-Agent Reinforcement Learning Towards Fully 3d Autonomous Wildfire Response, Bryce Hopkins

All Theses

As climate-exacerbated wildfires increasingly threaten landscapes and communities, there is an urgent and pressing need for sophisticated fire management technologies. Coordinated teams of Unmanned Aerial Vehicles (UAVs) present a promising solution for detection, assessment, and even incipient-stage suppression – especially when integrated into a multi-layered approach with other recent wildfire management technologies such as geostationary/polar-orbiting satellites and CCTV detection networks. However, there remains significant challenges in developing the necessary sensing, navigation, coordination, and communication subsystems that enable intelligent UAV teams. Further, federal regulations governing UAV deployment and autonomy pose constraints on real-world aerial testing, creating a disconnect between theoretical research …

Decision-Making Algorithms For Drilling Instrument Control Systems, Fuzayl Fozil Ugli Odilov

Chemical Technology, Control and Management

The control of the movement of the drilling tool and the structure of the well are considered. An effective control algorithm for drilling systems that provides control of well trajectory parameters is analyzed. In technological processes, it is necessary to control several parameters or several systems at the same time. It is considered necessary to create decision-making algorithms for the formation of managerial effects for the control system of such technological processes. The controlled oriented type of the bottom of the drill string was analyzed. Work was carried out on the decision-making algorithm for the processing of control effects. The …

Exploring The Impact Of Artificial Intelligence On Project Management Across The Manufacturing, Technology, And Construction Industries, Susie Diaz Ferrera

Harrisburg University Dissertations and Theses

This study explores the impact of Artificial Intelligence (AI) on project management across the manufacturing, technology, and construction industries. The research focuses on understanding the benefits, challenges, and long-term implications of AI utilization in these sectors. Key findings indicate that 46% of participants use AI mainly for task automation and enhancing functions like brainstorming and communication, which significantly boosts efficiency and team productivity. Despite these benefits, the research identifies several obstacles, including high initial costs, inadequate training, technical issues, and unclear regulatory guidelines. The study addresses four main questions, revealing that AI not only enhances project management processes but also …

Optimal False Data Injection (Fdi) In Simulated Cooperative Adaptive Cruise Control (Cacc) Systems, Lovro Dukic

Master's Theses

In the rapidly advancing field of autonomous vehicles, ensuring the security and reliability of self-driving systems is crucial. Autonomous vehicle systems, such as cooperative adaptive cruise control (CACC), must undergo significant research and testing before their integration into commercial intelligent transportation systems. CACC considers multiple vehicles in close proximity as a single entity, or platoon, with each vehicle equipped with a controller that uses sensor-based measurements and vehicle-to-vehicle (V2V) communication to control inter-vehicle spacing. While this system offers numerous potential benefits for traffic safety and efficiency, it is also susceptible to False Data Injection (FDI) attacks, which can cause the …

State Omniscience For Cooperative Local Catalog Maintenance Of Close Proximity Satellite Systems, Chris Hays

Doctoral Dissertations and Master's Theses

Resiliency in multi-agent system navigation is reliant on the inherent ability of the system to withstand, overcome, or recover from adverse conditions and disturbances. In large part, resiliency is achieved through reducing the impact of critical failure points to the success and/or performance of the system. In this view, decentralized multi-agent architectures have become an attractive solution for multi-agent navigation, but decentralized architectures place the burden of information acquisition directly on the agents themselves. In fact, the design of distributed estimators has been a growing interest to enable complex multi-sensor/multi-agent tasks. In such scenarios, it is important that each local …

Fair Fault-Tolerant Approach For Access Point Failures In Networked Control System Greenhouses, Mohammed Ali Yaslam Ba Humaish

Theses and Dissertations

Greenhouse Networked Control Systems (NCS) are popular applications in modern agriculture due to their ability to monitor and control various environmental factors that can affect crop growth and quality. However, designing and operating a greenhouse in the context of NCS could be challenging due to the need for highly available and cost-efficient systems. This thesis presents a design methodology for greenhouse NCS that addresses these challenges, offering a framework to optimize crop productivity, minimize costs, and improve system availability and reliability. It contributes several innovations to the field of greenhouse NCS design. For example, it recommends using the 2.4GHz frequency …

Nonlinear Guidance And Control Of Unmanned Aerial Manipulators For Delivering A Payload On A Moving Platform, Ravi Gyawali

Mechanical and Aerospace Engineering Theses - Archive

Unmanned Aerial manipulators (UAMs) are a class of Unmanned Aerial Vehicles (UAVs) equipped with a manipulator. By combining the aerial mobility of a UAV with a manipulator's dexterity, these hybrid systems can perform a wide range of complex tasks while reducing risks and costs. As a result, they are increasingly being utilized for military, industrial, and agricultural applications.

The thesis presents a novel approach for a multi-UAM system to collaboratively deliver a payload on a stationary or maneuvering platform. A sliding-mode-based guidance law, sourced from existing literature, is integrated with a combined control technique for the UAVs and their respective …

On Uncertainty For Ill-Posed Robot Decision Problems, Jared Joseph Beard

Graduate Theses, Dissertations, and Problem Reports (ETD)

As robots adopt more real world responsibilities, they will be expected to solve more complicated problems. In some cases limited prior knowledge will result in unmodelled environmental conditions; in others, multiple users may have competing perspectives on how to frame a decision problem. Many existing frameworks, namely Markov decision processes (MDP) presuppose users have identified a specific problem with models sufficient to solve or learn a problem. If we wish to extend MDPs to novel problems or those heavily dependent on user feedback, autonomous decision makers must be able to identify limitations in how a given problem is framed and …

V2i-Based Adaptive Collision Avoidance For Safety And Traffic Efficiency, Vaishnavi Balambeed

Dissertations, Master's Theses and Master's Reports

To leverage the growing communication and connectivity among modern vehicles, Vehicle-to-Vehicle (V2V) and Vehicle-to-Infrastructure (V2I) systems are increasingly being used to implement active safety applications. However, current research often overlooks the impact of algorithms such as collision avoidance on traffic flow efficiency. This work investigates the adaptation of a collision avoidance algorithm implemented in V2I to incorporate a variable time headway and spacing control strategy. The proposed approach aims to maintain higher average speeds among vehicles, lower individual vehicle’s waiting, and travel times in the vicinity of the infrastructural unit while simultaneously avoiding collisions; thereby enhancing both safety and traffic …

Dynamic Modeling And Control Of A Solid State Semiconductor-Based Transformer, Microgrid And Storage Systems, Rubén Darío Viñán-Velasco

Department of Electrical and Computer Engineering: Dissertations, Theses, and Student Research

Smart Grids are power grid models designed with the idea of including the growing new technologies, from generation to storage devices, and are a response to the growing demands from consumers and the presence of electronic components being commonplace in the modern devices. The design requires a dynamic alternative in order to build an independent grid that can also work in cooperation with other micro-grids and the power grid in an integrated way. Smart-grids present several advantages over the traditional power grid scheme, but the economic costs of the components required to implement smart-grids is currently a great limitation. This …

External Runtime Execution Monitoring Of A Cyber Physical System Via Trace Interfaces, Peter Vaughan Truslow

Theses and Dissertations

In the past two decades, Unmanned Aerial Systems have progressed from expensive military hardware or one-off custom builds, to include off-the-shelf drones that can be purchased for a rather affordable price and flown by nearly anyone. As the technology and performance have improved, the door is opened to applications that require operation in environments where the consequences for failure are high, such as operating in the navigable airspace or in urban environments, or with human passengers. This requires a great deal of trust in the reliability and integrity of the control systems of the aircraft. A method of monitoring the …

Implementing Associative Learning Using Neuromorphic Robot, Vinay Kumar Pillalamarri

Dissertations, Master's Theses and Master's Reports

Associative learning, a key cognitive process seen across the animal kingdom, enables organisms to form connections between stimuli and adapt their behaviors based on past experiences. A particularly powerful example is fear conditioning, where animals learn to associate a neutral stimulus with an aversive one, allowing them to predict and avoid potential threats. Inspired by this mechanism, this project implements associative learning on an unmanned ground vehicle (UGV) to develop adaptive behavior through neuromorphic principles. Utilizing Nengo for neural modeling, the UGV learns to associate visual (red color) and tactile (vibration) stimuli through Hebbian learning, a biologically inspired synaptic adaptation …

Autonomous Basketball Court Creation Robot, Bryce Haldeman, Tyler Gray, Dalon Vura

Williams Honors College, Honors Research Projects

The Autonomous Basketball Court Outlining System presents a comprehensive solution for precision court marking. Powered by a 24V lithium-ion battery and driven by a single ST microcontroller, the system autonomously marks the outline of a half basketball court using predefined algorithms. User-friendly features include easy loading of marking material, actuated by gravity or a small servo motor depending on material of choice, ensuring intuitive operation. Safety is prioritized, with the servo motor eliminating high-pressure concerns, and the system maintains a controlled speed accounting for user well-being. Two step and direction servo motors enable accurate linear displacement, facilitating straight lines, and …

Application Of Quantum Algorithms In The Synthesis Of Dynamic Objects, Noilakhon Yakubova

Chemical Technology, Control and Management

Around the world, the food industry is focusing on achieving energy and resource efficiency. One of the main challenges in the field of process automation is the creation of effective control systems using intelligent technologies to improve the quality of processes and achieve the production of high-quality products with less energy and resources. Therefore, it is necessary to work with a large amount of data. Particular attention is paid to the development of computational algorithms for automated high-speed computational analysis systems for processing this data at high speed. Therefore, the article discusses the use of quantum computing methods in controlling …

Control Of Fully-Actuated Aerial Manipulators And Omni-Directional Multirotors, Riley M. Mccarthy

Mechanical Engineering ETDs

This thesis details the system modeling, design, control, simulation, construction, and
testing of both a fully-actuated and omni-directional multirotor aerial system created
for the primary purpose of performing active tasks with their environment. This work
verifies the capabilities of both systems through empirical testing, and demonstrates
how through the use of new control methods and physical designs multirotors can
expand their purpose from passive inspection based tasks to active contact based
tasks. These systems take advantage of newly implemented control allocation features present in the PX4 flight control software, version 1.14. The use of which makes designing controllers for such …