Electrical and Computer Engineering Commons^™

Microstructural Evaluation Of Aluminium Alloy A365 T6 In Machining Operation, Bankole I. Oladapo, S. Abolfazl Zahedi, Francis T. Omigbodun, Edwin A. Oshin, Victor A. Adebiyi, Olaoluwa B. Malachi

Electrical & Computer Engineering Faculty Publications

The optimum cutting parameters such as cutting depth, feed rate, cutting speed and magnitude of the cutting force for A356 T6 was determined concerning the microstructural detail of the material. Novel test analyses were carried out, which include mechanical evaluation of the materials for density, glass transition temperature, tensile and compression stress, frequency analysis and optimisation as well as the functional analytic behaviour of the samples. The further analytical structure of the particle was performed, evaluating the surface luminance structure and the profile structure. The cross-sectional filter profile of the sample was extracted, and analyses of Firestone curve for the …

Optical And Electrical Analysis Of Zno/Znte Micropillar Solar Cells, Sadia Binte Sohid

Master’s Theses

The prime focus of the energy-research community in recent times has been replacing fossil fuels with renewable energy. Therefore, photovoltaic research areas are rapidly expanding in this era. The purpose of this work is to compare three different structural ZnO/ZnTe solar cell types (planar, axial micropillar and radial micropillar). The best optical and electrical performance has been obtained by the radial junction (core-shell) ZnO/ZnTe micropillar solar cell due to its pillar structure and radial junction. The unique advantage of the radial junction micropillar is that the angle of the incident light and the carrier collection is orthogonal. Therefore, the pillar …

Low Power Voltage Reference Cells For Sensing Applications, Kody Ray Tucker

Graduate Theses, Dissertations, and Problem Reports (ETD)

Two low-power voltage reference cells for a system on-chip design are presented in this report. Both cells utilize a combination of standard transistors to produce an output voltage near 1 volt. Choosing the appropriate design procedures can aid in minimizing the temperature coefficient (TC) of the output reference voltage coming out of the cell. One circuit, covered first, is currently being fabricated on a standard 0.5 µm chip complementary metal oxide semiconductor (CMOS) process, while the other is still in the designing stage. The first one has a TC of 86 ppm/◦C with a reference voltage of 1.10 V while …

Modeling And Simulation Methodologies For Spinal Cord Stimulation., Saliya Kumara Kirigeeganage

Electronic Theses and Dissertations

The use of neural prostheses to improve health of paraplegics has been a prime interest of neuroscientists over the last few decades. Scientists have performed experiments with spinal cord stimulation (SCS) to enable voluntary motor function of paralyzed patients. However, the experimentation on the human spinal cord is not a trivial task. Therefore, modeling and simulation techniques play a significant role in understanding the underlying concepts and mechanics of the spinal cord stimulation. In this work, simulation and modeling techniques related to spinal cord stimulation were investigated. The initial work was intended to visualize the electric field distribution patterns in …

Testing And Packaging For Mems Acoustic Emission Sensors, Ting-Hung Liu

USF Tampa Graduate Theses and Dissertations

The goal of this research is to improve the structure and dimension of the MEMS acoustic emission sensor. Acoustic emission sensor (AE sensor) based on the piezoelectric transducer is a well-developed technology in non-destructive testing that is widely used to determine permanent damage such as cracks and corrosions in buildings and structures. The AE sensor can be used to monitor cracks in structures and to check leakage in pressurized systems. The location of cracks in a structure or system leakage causes a high-frequency surface vibration while releasing ultrasonic energy. The frequency of this energy is typically between 30 kHz to …

Design, Simulation, And Hardware Construction Of A 600 W Solid State Dc Circuit Breaker For The Dc House Project, Calin Matthew Bukur

Master's Theses

DC circuit breakers must be able to arrest overcurrent conditions to prevent electrical equipment and wiring from causing building fires or other hazards from occurring. With more DC renewable sourced structures such as Cal Poly’s DC House, an inexpensive and reliable protection system is necessary to ensure safe energy transfer to the loads. One method of protecting a system is preventing excessive amounts of current to be drawn by the load when the surrounding components are rated at a lesser value. DC circuit breakers act as a monitoring system and barely presents an effect on the voltage or power. With …

Design And Analysis Of Class Ef2 Inverter For Driving Transmitting Printed Spiral Coil, Mohammad Haerinia, Ebrahim S. Afjei

Electrical Engineering Student Publications

This paper studies a high frequency inverter for low power applications at a short distance. Class 𝐸𝐹2 inverter is selected and designed as a transmitting driver. A printed spiral coil is designed as a transmitting coil and is connected to the high frequency inverter. Experimental results are obtained to compare with simulation results. The experiment and simulation are in good agreement and the circuit design is verified. Operating frequency is 2.75 MHz. Maximum flux density is generated by transmitting coil is measured 149uT.

A Model-Based Transformation Framework For Designing And Analyzing Wireless Sensor Networks, Raoudha Saida, Yessine Hadj Kacem, Mohammed Sulaiman Bensaleh, Mohamed Abid

Turkish Journal of Electrical Engineering and Computer Sciences

Wireless sensor networks (WSNs) comprise resource-constrained (e.g., memory, processing, and energy) sensor nodes that are deployed in different areas and are able to monitor environmental conditions. Simulation has been widely used in order to evaluate the network performance. In this context, software designers need to evaluate, refine, and validate high-level models for WSN applications at early stages of development via simulation tools, in particular for WSN applications supporting energy-harvesting devices. In the present paper, we propose a model-based transformation framework that allows the modeling and simulation of a WSN system supporting energy-harvesting capabilities. In this proposal, we start from a …

Dynamic Simulation Of The Cad Model In Simmechanics With Multiple Uses, Jiri Zátopek, Zdenek Ú?Ední?Ek, José Machado, João Sousa

Turkish Journal of Electrical Engineering and Computer Sciences

When designing a mechatronic system, several steps are taken into account. One of the main steps is the design of a CAD model representing the physical part of the system, and another major point is the development of the mathematical model necessary for the respective controller design. This paper combines both design steps and shows the advantages of using this approach. First, a CAD model is created considering the kinematic and dynamic behavior of the system as well as respective material properties. This CAD model is, in parallel, used for both purposes: as the main basis for developing a mathematical …

A Simulation Method For Studying Effects Of Site-Specific Clutter On Sar-Gmti Performance, Marcus James Campbell

Browse all Theses and Dissertations

Synthetic aperture radar (SAR) is an invaluable tool for detection of ground moving targets when combined with processing techniques of ground moving target indication (GMTI). This work investigates a simulation methodology for studying impact of site-specific ground clutter on SAR-GMTI performance. A terrain model is proposed and is based on digital terrain elevation data (DTED) and national land-use land-cover data (NLCD) as provided by the US Geological Survey. The proposed physical optics simulation method capitalizes on high-fidelity digital target models in combination with the proposed terrain model. SAR phase history is generated for a moving commercial target in situ of …

Advanced Synchronous Machine Modeling, Yuqi Zhang

Theses and Dissertations--Electrical and Computer Engineering

The synchronous machine is one of the critical components of electric power systems. Modeling of synchronous machines is essential for power systems analyses. Electric machines are often interfaced with power electronic components. This work presents an advanced synchronous machine modeling, which emphasis on the modeling and simulation of systems that contain a mixture of synchronous machines and power electronic components. Such systems can be found in electric drive systems, dc power systems, renewable energy, and conventional synchronous machine excitation. Numerous models and formulations have been used to study synchronous machines in different applications. Herein, a unified derivation of the various …

Modeling And Simulation Of Iii-Nitride-Based Solar Cells Using Nextnano®, Malak Refaei

Graduate Theses and Dissertations

Nextnano³ software is a well-known package for simulating semiconductor band-structures at the nanoscale and predicting the general electronic structure. In this work, it is further demonstrated as a viable tool for the simulation of III-nitride solar cells. In order to prove this feasibility, the generally accepted solar cell simulation package, PC1D, was chosen for comparison. To critique the results from both PC1D and Nextnano3, the fundamental drift-diffusion equations were used to calculate the performance of a simple p-n homojunction solar cell device analytically. Silicon was picked as the material for this comparison between the outputs of the two simulators as …

A Parameterized Simulation Of Doppler Lidar, David B. Chester

All Graduate Theses and Dissertations, Spring 1920 to Summer 2023

Upcoming missions to explore planetary bodies in the solar system will require accurate position and velocity data during descent in order to land safely at a predesignated site. A Doppler lidar instrument could provide measurements of the altitude, attitude, and velocity of the landing vehicle to supplement the data collected by other instruments. A flexible simulation tool would aid the tasks of designing and testing the functionality of such an instrument.

LadarSIM is a robust parameterized simulation tool developed for time of flight lidar at Utah State University's Center for Advanced Imaging Ladar. This thesis outlines how LadarSIM was modified …

Development Mems Acoustic Emission Sensors, Adrian Enrique Avila Gomez

USF Tampa Graduate Theses and Dissertations

The purpose of this research is to develop MEMS based acoustic emission sensors for structural health monitoring. Acoustic emission (AE) is a well-established nondestructive testing technique that is typically used to monitor for fatigue cracks in structures, leaks in pressurized systems, damages in composite materials or impacts. This technology can offer a precise evaluation of structural conditions and allow identification of imminent failures or minor failures that can be addressed by planned maintenances routines. AE causes a burst of ultrasonic energy that is measured as high frequency surface vibrations (30 kHz to 1 MHz) generated by transient elastic waves that …

Modeling And Simulation Of Microgrid, Ahmad Alzahrani, Mehdi Ferdowsi, Pourya Shamsi, Cihan H. Dagli

Electrical and Computer Engineering Faculty Research & Creative Works

Complex computer systems and electric power grids share many properties of how they behave and how they are structured. A microgrid is a smaller electric grid that contains several homes, energy storage units, and distributed generators. The main idea behind microgrids is the ability to work even if the main grid is not supplying power. That is, the energy storage unit and distributed generation will supply power in that case, and if there is excess in power production from renewable energy sources, it will go to the energy storage unit. Therefore, the electric grid becomes decentralized in terms of control …

Simulation, Performance And Interference Analysis Of Multi-User Visible Light Communication Systems, Adel Aldalbahi

Dissertations

The emergence of new physical media such as optical wireless, and the ability to aggregate these new media with legacy networks motivate the study of heterogeneous network performance, especially with respect to the design of protocols to best exploit the characteristics of each medium.

This study considers Visible Light Communications (VLC), which is expected to coexist with legacy and future radio frequency (RF) media. While most of the research on VLC has been done on optimizing the physical medium, research on higher network layers is only beginning to gain attention, requiring new analyses and tools for performance analysis.

The first …

On The Simulation And Mitigation Of Anisoplanatic Optical Turbulence For Long Range Imaging, Russell C. Hardie, Daniel A. Lemaster

Electrical and Computer Engineering Faculty Publications

We describe a numerical wave propagation method for simulating long range imaging of an extended scene under anisoplanatic conditions. Our approach computes an array of point spread functions (PSFs) for a 2D grid on the object plane. The PSFs are then used in a spatially varying weighted sum operation, with an ideal image, to produce a simulated image with realistic optical turbulence degradation. To validate the simulation we compare simulated outputs with the theoretical anisoplanatic tilt correlation and differential tilt variance. This is in addition to comparing the long- and short-exposure PSFs, and isoplanatic angle. Our validation analysis shows an …

Low Bandwidth Communication For Networked Power Hardware-In-The-Loop Simulation, Sean Borgsteede

Theses and Dissertations

Power-Hardware-In-the-Loop (PHIL) simulations allow the design and validation of power hardware components in virtual power system schemas with near real-time operation. This technique is increasingly used in the development cycle of many products to reduce design costs and increase design fidelity. The Hardware under Test (HuT) interfaces with a simulation of the user’s choosing through a hardware interface (HI). The digitally simulated system (DSS) runs on the real-time simulator before sending a reference value to the hardware interface to enforce. In this virtual to real interface, closed-loop stability and the simulation accuracy are the two paramount criteria in regards to …

Applications Of Krylov Subspace And Balanced Truncation Model Order Reduction In Power Systems, Sebastian Emanuel Garrido

Graduate Theses and Dissertations

Dynamic representations of power systems usually result in the order of hundreds or even thousands of buses. Therefore, reduction of these dynamic representations is convenient. Two applications of model order reduction in power systems are discussed in this thesis. First, Krylov subspace-based method is applied to the IEEE-123 Node Test Feeder in the context of distribution-level power systems simulation. Second, a Balanced Truncation-based model reduction is implemented in the 3-Machine 9-Bus system for designing a power system controller in the context of generation- and transmission-level power systems.

First, for the IEEE-123 Node Test Feeder, a two-sided Arnoldi algorithm is proposed …

Optimizing Control Of Shell Eco-Marathon Prototype Vehicle To Minimize Fuel Consumption, Chad Louis Bickel

Master's Theses

Every year the automotive industry strives to increase fuel efficiency in vehicles. When most vehicles are designed, fuel efficiency cannot always come first. The Shell Eco-marathon changes that by challenging students everywhere to develop the most fuel-efficient vehicle possible. There are many different factors that affect fuel efficiency, and different teams focus on different vehicle parameters. Currently, there is no straightforward design tool that can be used to help in Shell Eco-marathon vehicle design. For this reason, it is difficult to optimize every vehicle parameter for maximum fuel efficiency.

In this study, a simulation is developed by using basic vehicle …

Simulation Of Anisoplanatic Imaging Through Optical Turbulence Using Numerical Wave Propagation With New Validation Analysis, Russell C. Hardie, Jonathan D. Power, Daniel A. Lemaster, Douglas R. Droege, Szymon Gladysz, Santasri Bose-Pillai

Electrical and Computer Engineering Faculty Publications

We present a numerical wave propagation method for simulating imaging of an extended scene under anisoplanatic conditions. While isoplanatic simulation is relatively common, few tools are specifically designed for simulating the imaging of extended scenes under anisoplanatic conditions. We provide a complete description of the proposed simulation tool, including the wave propagation method used. Our approach computes an array of point spread functions (PSFs) for a two-dimensional grid on the object plane. The PSFs are then used in a spatially varying weighted sum operation, with an ideal image, to produce a simulated image with realistic optical turbulence degradation. The degradation …

Horizontal Directional Drilling Pilot Bore Simulation, Paulius Tervydis, Ruta Jankuniene

Turkish Journal of Electrical Engineering and Computer Sciences

Various underground communications (water or gas supply systems, sewage, power lines) have been installed in recent years using trenchless technologies, i.e. horizontal directional drilling (HDD). This technique by its nature does not disturb the traffic and is environmentally friendly. One must be aware that, with HDD, pipeline building time is shortened. With respect to the above, HDD is especially effective in highly populated or industrial areas. However, it is necessary to ensure that HDD works, in order to prevent damage to installed underground facilities. The aim of this work is to propose a user-friendly and inexpensive simulation tool with required …

The Simulation For Ultrasonic Testing Based On Frequency-Phase Coded Excitation, Jiaying Zhang, Wenlong Tian, Tie Gang, Sen Cong, Zhaoyang Sheng

The 8th International Conference on Physical and Numerical Simulation of Materials Processing

No abstract provided.

Modeling And Simulation Of 1700 V 8 A Genesic Superjunction Transistor, Staci E. Brooks

Graduate Theses and Dissertations

The first-ever 1.7kV 8A SiC physics-based compact SPICE model is developed for behavior prediction, modeling and simulation of the GeneSiC “Super” Junction Transistor. The model implements Gummel-Poon based equations and adds a quasi-saturation collector series resistance representation from a 1.2 kV, 6 A SiC bipolar junction transistor model developed in Hangzhou, China. The model has been validated with the GA08JT17-247 device data representing both static and dynamic characteristics from GeneSiC. Parameter extraction was performed in IC-CAP and results include plots showing output characteristics, capacitance versus voltage (C-V), and switching characteristics for 25 °C, 125 °C, and 175 °C temperatures.

Simulation, Measurement, And Emulation Of Photovoltaic Modules Using High Frequency And High Power Density Power Electronic Circuits, Yunas Erkaya

Electrical & Computer Engineering Theses & Dissertations

The number of solar photovoltaic (PV) installations is growing exponentially, and to improve the energy yield and the efficiency of PV systems, it is necessary to have correct methods for simulation, measurement, and emulation. PV systems can be simulated using PV models for different configurations and technologies of PV modules. Additionally, different environmental conditions of solar irradiance, temperature, and partial shading can be incorporated in the model to accurately simulate PV systems for any given condition.

The electrical measurement of PV systems both prior to and after making electrical connections is important for attaining high efficiency and reliability. Measuring PV …

Advances In Repurposing And Recycling Of Post-Vehicle-Application Lithium-Ion Batteries, Charles R. Standridge, Lindsay Corneal, Nicholas Baine

Mineta Transportation Institute

Increased electrification of vehicles has increased the use of lithium-ion batteries for energy storage, and raised the issue of what to do with post-vehicle-application batteries. Three possibilities have been identified: 1) remanufacturing for intended reuse in vehicles; 2) repurposing for non-vehicle, stationary storage applications; and 3) recycling, extracting the precious metals, chemicals and other byproducts. Advances in repurposing and recycling are presented, along with a mathematical model that forecasts the manufacturing capacity needed for remanufacturing, repurposing, and recycling. Results obtained by simulating the model show that up to a 25% reduction in the need for new batteries can be achieved …

Enhancement Of Supercapacitor Energy Storage By Leakage Reduction And Electrode Modification, Tete Tevi

USF Tampa Graduate Theses and Dissertations

Supercapacitors have emerged in recent years as a promising energy storage technology. The main mechanism of energy storage is based on electrostatic separation of charges in a region at the electrode-electrolyte interface called double layer. Various electrode materials including carbon and conducting polymers have been used in supercapacitors. Also, supercapacitors offer high life cycle and high power density among electrochemical energy storage devices. Despite their interesting features, supercapacitors present some disadvantages that limit their competitivity with other storage devices in some applications. One of those drawbacks is high self-discharge or leakage. The leakage occurs when electrons cross the double layer …

Cepsim: Modelling And Simulation Of Complex Event Processing Systems In Cloud Environments, Wilson A. Higashino, Miriam Am Capretz, Luiz F. Bittencourt

Electrical and Computer Engineering Publications

The emergence of Big Data has had profound impacts on how data are stored and processed. As technologies created to process continuous streams of data with low latency, Complex Event Processing (CEP) and Stream Processing (SP) have often been related to the Big Data velocity dimension and used in this context. Many modern CEP and SP systems leverage cloud environments to provide the low latency and scalability required by Big Data applications, yet validating these systems at the required scale is a research problem per se. Cloud computing simulators have been used as a tool to facilitate reproducible and repeatable …

Design And Implementation Of A New Manet Simulator Model For Aodv Simulation, Si̇nan Tüncel, Hüseyi̇n Eki̇z, Ahmet Zengi̇n

Turkish Journal of Electrical Engineering and Computer Sciences

No abstract provided.

A Dielectric Rod Antenna For Picosecond Pulse Stimulation Of Neurological Tissue, Ross A. Petrella, Karl H. Schoenbach, Shu Xiao

Bioelectrics Publications

A dielectrically loaded wideband rod antenna has been studied as a pulse delivery system to subcutaneous tissues. Simulation results applying 100-ps electrical pulse show that it allows us to generate a critical electric field for biological effects, such as brain stimulation, in the range of several centimeters. In order to reach the critical electric field for biological effects, which is similar to 20 kV/cm, at a depth of 2 cm, the input voltage needs to be 175 kV. The electric field spot size in the brain at this position is similar to 1 cm(2). Experimental studies in free space with …