Electrical and Computer Engineering Commons^™

Designing Harvesting And Hauling Cost Models For Energy Cane Production For Biorefineries, Prabodh Illukpitiya, Firuz Yuldashev, Kabirat Nasiru

Agricultural and Environmental Sciences Faculty Research

The harvesting and hauling operations of bioenergy feedstock is an important area in biofuel production. Production costs can be minimized by maintaining optimal machinery units for these operations. The objective of this study is to design an optimal harvesting unit for bioenergy refinery and estimate harvesting and hauling costs of energy cane. A biorefinery with the annual capacity of processing twenty-five million imp. gallons of ethanol were considered. Given the efficiency of harvesting, a two-row soldier system was considered. Considering the year-round supply of energy cane to the refinery, the optimal machinery unit was designed, and the combined operation costs …

Optimizing Speed Profiles For Sustainable Train Operation With Wayside Energy Storage Systems, Leon A. Allen

Dissertations

Large hauling capability and low rolling resistance has put rail transit at the forefront of mass transportation mode sustainability in terms of congestion mitigation and energy conservation. As such, rail vehicles are one of the least energy-intensive modes of transportation and least environmentally polluting. Despite, these positives, improper driving habits and wastage of the braking energy through dissipation in braking resistors result in unnecessary consumption, extra costs to the operator and increased atmospheric greenhouse gas emissions.

This study presents an intelligent method for the optimization of the number and locations of wayside energy storage system (WESS) units that maximize the …

Resource Allocation For Heterogeneous Wireless Networks Of Devices With Multi-Connectivity, Monika Prakash

Dissertations

This dissertation contributes to designing an effective resource allocation scheme for multi-connectivity (MC) networks. MC is a feature that allows devices to utilize the radio resources from more than one base station simultaneously. With MC anticipated to play a key role in satisfying the stringent QoS requirements of the next-generation networks (5G/6G), it is crucial to efficiently allocate the resources across multiple connections of one or more radio access technologies (RATs).
/="/">Currently, there is a huge demand on the availability of radio spectrum resources with a large volume of different types of data traffic (Internet-of-things, human-based, machine-machine) traversing the …

Cellular Service With Settlement-Free Peering, Shahzeb Mustafa, Sayanta Seth, Murat Yuksel, Mostafizur Rahman

Electrical and Computer Engineering Faculty Publications

Despite several iconic innovations in wireless networks, cellular service still remains largely unreliable with regards to non-urban network coverage. Cellular providers often need to make roaming agreements among each other for serving their customers with basic connectivity in areas where they do not have coverage. Considering all the technical limitations of domestic roaming, we present a “wireless peering” model for settlement-free spectrum sharing. It allows providers to extend their coverage to “off-network” regions without any hardware modifications. Its software-defined nature makes the model highly scalable, easy to deploy and cost-effective. Simulation results show a significant improvement in off-network wireless speed, …

Vanet Broadcast Protocol: A Multi-Hop Routing Framework For Vehicular Networks In Ns-3, William M. Bjorndahl

LMU Theses and Dissertations

Vehicles are more frequently being built with hardware that supports wireless communica- tion capabilities. Dedicated short-range communications (DSRC) is a standard that enables the hardware on vehicles to communicate with one another directly rather than through external infrastructure such as a cellular tower. With DSRC supporting small-range communications, multi-hop routing is utilized when a packet needs to reach a long-range destination. A vehicular ad-hoc network (VANET) broadcast protocol (VBP) was developed. This thesis introduces VBP, an open-source framework for simulating multi-hop routing on mobile and wireless vehicular networks. VBP is built for the routing layer of the network simulation tool …

Parametric Average-Value Modeling, Simulation, And Characterization Of Machine-Rectifier Systems, Isuje Ojo

Theses and Dissertations--Electrical and Computer Engineering

There are many techniques for modeling and simulation of synchronous machine-rectifier systems. The more common approaches are the detailed and average-value modeling techniques. The detailed simulation technique takes into account the details of the diode switching and is both very accurate and very expensive in terms of computational resources. To alleviate this disadvantage, the average-value modeling technique is often utilized. In this approach, the details of diode switching are neglected or averaged. In that light, the work presented herein proposes a unique saliency-sensitive parametric average-value model (SSPAVM) of the synchronous machine-rectifier system. This model extends existing parametric average-value models to …

Performance Of Sensor Fusion For Vehicular Applications, Nikola Janevski

Graduate Theses, Dissertations, and Problem Reports (ETD)

Sensor fusion is a key system in Advanced Driver Assistance Systems, ADAS. The perfor-
mance of the sensor fusion depends on many factors such as the sensors used, the kinematic
model used in the Extended Kalman Filter, EKF, the motion of the vehicles, the type of
road, the density of vehicles, and the gating methods. The interactions between parameters
and the extent to which individual parameters contribute to the overall accuracy of a sensor
fusion system can be difficult to assess.
In this study, a full-factorial experimental evaluation of a sensor fusion system based
on a real vehicle was performed. …

Simulation Modeling Of A Photovoltaic-Green Roof System For Energy Cost Reduction Of A Building: Texas Case Study, Sojung Kim, Burchan Aydin, Sumin Kim

Faculty Publications

This study aims at introducing a modeling and simulation approach for a green roof system which can reduce energy cost of a building exposed to high temperatures throughout the summer season. First, to understand thermal impact of a green roof system on a building surface, a field-based study has been conducted in Commerce, Texas, U.S., where the average maximum temperature in summer is 104 F (40 C). Two types of analyses were conducted: (1) comparison of temperature between different plant type via Analysis of variance (ANOVA) and (2) polynomial regression analysis to develop thermal impact estimation model based on air …

Comparative Study Of Nano-Rod And Nano-Sphere Based Localized Surface Plasmon Resonance Refractive Index Biosensors, Mariam M. Moussilli M. M. Moussilli, Abdul Rahman El Falou

BAU Journal - Science and Technology

Localized Surface Plasmon Resonance (LSPR) waves generated by the interaction of light with noble metal nanoparticles has been of great interest in recent years due to the high sensitivity of the extinction spectra of these nanoparticles to the medium's surrounding refractive index up to the atomic level.

In this article, we simulate the extinction spectra of noble metal sphere and rod nanoparticles in order to study the effect of the geometrical shape and size of the nanoparticle on the sensitivity and detection accuracy performance parameters of the extinction spectra. We also simulated the response of the sphere and rod nanoparticle's …

The Matrix Revisited: A Critical Assessment Of Virtual Reality Technologies For Modeling, Simulation, And Training, George Demetrius Lecakes

Theses and Dissertations

A convergence of affordable hardware, current events, and decades of research have advanced virtual reality (VR) from the research lab into the commercial marketplace. Since its inception in the 1960s, and over the next three decades, the technology was portrayed as a rarely used, high-end novelty for special applications. Despite the high cost, applications have expanded into defense, education, manufacturing, and medicine. The promise of VR for entertainment arose in the early 1990's and by 2016 several consumer VR platforms were released. With VR now accessible in the home and the isolationist lifestyle adopted due to the COVID-19 global pandemic, …

Ultra-High-Energy Neutrino Detection Antenna Simulations, Nicholas C. Garcia

Electrical Engineering

Neutrinos allow researchers to investigate high-energy galactic phenomena, such as supernovae and black holes. Neutrinos interact with their surroundings via the weak nuclear force and therefore, travel unattenuated through space and are not deflected by electromagnetic fields. However, they do rarely interact with other particles. When neutrinos interact with nucleons (protons or neutrons) in a dielectric medium (i.e.: ice sheets), they are detectable through a cone of coherent electromagnetic radiation (Askaryan Radiation) created by the particle shower generated from the neutrino interaction [1]. The Radio Neutrino Observatory in Greenland (RNO-G) detects UHE neutrinos greater than 100 PeV (10¹⁵ eV) …

The Wargaming Commodity Course Of Action Automated Analysis Method, William T. Deberry

Theses and Dissertations

This research presents the Wargaming Commodity Course of Action Automated Analysis Method (WCCAAM), a novel approach to assist wargame commanders in developing and analyzing courses of action (COAs) through semi-automation of the Military Decision Making Process (MDMP). MDMP is a seven-step iterative method that commanders and mission partners follow to build an operational course of action to achieve strategic objectives. MDMP requires time, resources, and coordination – all competing items the commander weighs to make the optimal decision. WCCAAM receives the MDMP's Mission Analysis phase as input, converts the wargame into a directed graph, processes a multi-commodity flow algorithm on …

Pore Microstructure Impacts On Lithium Ion Transport And Rate Capability Of Thick Sintered Electrodes, Ziyang Nie, Rohan Parai, Chen Cai, Charles Michaelis, Jacob M. Lamanna, Daniel S. Hussey, David L. Jacobson, Dipankar Ghosh, Gary M. Koenig Jr.

Mechanical & Aerospace Engineering Faculty Publications

Increasing electrode thickness is one route to improve the energy density of lithium-ion battery cells. However, restricted Li⁺ transport in the electrolyte phase through the porous microstructure of thick electrodes limits the ability to achieve high current densities and rates of charge/discharge with these high energy cells. In this work, processing routes to mitigate transport restrictions were pursued. The electrodes used were comprised of only active material sintered together into a porous pellet. For one of the electrodes, comparisons were done between using ice-templating to provide directional porosity and using sacrificial particles during processing to match the geometric density …

Assessment Of Cable Length Limit For Effective Protection By Z-Source Circuit Breakers In Dc Power Networks, Ruiyun Fu, Sagar Bhatta, Joseph M. Keller, Yucheng Zhang

Electrical & Computer Engineering Faculty Publications

This paper introduces groundbreaking research on how to assess the Cable Length Limit (CLL) to ensure effective protection by Z-source Circuit Breakers (ZCBs) in DC power networks. It has been revealed that the line parameters of power cables have a significant impact on the cutoff performance of ZCBs. The question of assessing the CLL has been raised as an unsolved problem. In this paper, a method of CLL assessment is proposed based on physical models and simulation tests. To verify the proposed method, two studies were performed to assess the Cable Length Limits depending on fault levels and power delivery …

Passive Control Strategies For Cooling A Non-Residential Nearly Zero Energy Office: Simulated Comfort Resilience Now And In The Future, Adam O'Donovan, Michael D. Murphy, Paul D. O'Sullivan

Publications

The average global cooling demand in non-residential buildings is expected to increase by over 275% between now and 2050. Controlled passive cooling is fundamental to successful operational performance of buildings and in mitigating energy that would otherwise be consumed by mechanical systems. The aim of this study was to determine the resilience of different passive cooling control strategies in delivering optimal comfort and energy scenarios in both current and future extreme conditions, for low energy indoor office spaces. Simulations were conducted using a calibrated TRNSYS 17 model of a nearly zero energy building. The performance of ten passive cooling control …

Ofdm Simulation, Joseph W. Bednar

Electrical Engineering

The project objective is to provide a tool that will allow the user to simulate an adaptive OFDM (Orthogonal Frequency-Division Multiplexing) communication system in the presence of various types of interference and noise. The open-source code allows students and engineers to adjust the modulation, threshold settings, and distortion effects in the channel while observing the output bit error rate. The results the simulation provides will aid researchers in attempting to characterize the interference of OFDM based systems and their effectiveness in the presence of noise.

Developing A Substation Design Curriculum For Electronics Engineering Technology, Filipe Santos Araujo, Erik A. Mayer

ASEE North Midwest Section Annual Conference 2020 Publications

Background: The latest technologies have created an increasing demand for the generation, transmission, and distribution of electricity. Substations are a crucial segment of our power grid. Substations are used to step-up voltages for the long-distance transmission of energy and to stepdown voltages for industrial and residential use. The demand for substation design curriculum was discussed at a meeting of the Industrial Advisory Committee (IAC) for EET. Members of the IAC consisted of professionals from Black & Veatch and other companies that work with power systems such as substations and switchgear. The curriculum was developed in close cooperation with Black & …

A Comparison Of Platform Configurations For Robotics Development Within Ros2, Raspberry Pi, Andwebots, Katherine Gisi, Diane T. Rover, Phillip H. Jones Iii

ASEE North Midwest Section Annual Conference 2020 Publications

Background: The field of robotics continues to expand with new, progressive technologies. The vast ecosystem of robotics, with its countless routes, is initially challenging to navigate. It is even more so during a season of virtual instruction. Creating strategic entrance points for the incoming students merits consideration. Purpose: Our aim is to provide a way for students to explore three critical areas in robotics: the physical robot (hardware), the simulated robot (digital twin), and the operating system and code (controller).
Method: We explore options for integrating two advanced robot development frameworks (i.e. Robot Operating System 2 (ROS2) and Webots) in …

Structural – Parametric Analysis And Synthesis Of Glass Furnace Condition Observer, Utkir Uktam O‘G‘Li Kholmanov

Chemical Technology, Control and Management

A modified Kalman filter of the glass cooking process is synthesized, taking into account perturbations in the form of a sequence of colored noises. The possibility of expanding this filter by noise filters to improve functioning in the presence of low-frequency disturbances is studied and a corresponding estimation scheme with additional noise filters is proposed. The results of the simulation allow us to assume that low-frequency disturbances in the glass furnace act at the input and affect the state of the control object.

An Aggregated And Equivalent Home Model For Power System Studies With Examples Of Building Insulation And Hvac Control Improvements, Huangjie Gong, Evan S. Jones, Dan M. Ionel

Power and Energy Institute of Kentucky Faculty Publications

Introducing new technologies into existing residences provides opportunities for the utility to enhance a community's power system performance. To validate the benefits of such technologies, an energy model is required in which their integration with a community's power system may be simulated. It can be difficult or impossible to properly model a power system without sufficient sample data. This paper proposes a method that uses Gaussian kernel density estimation (GKDE) to calculate the aggregated net power flow of a community's distribution system with only limited sample points at each time step. Example case studies that confirm the usefulness of the …

An End-To-End Trainable Method For Generating And Detecting Fiducial Markers, J. Brennan Peace

Department of Electrical and Computer Engineering: Dissertations, Theses, and Student Research

Existing fiducial markers are designed for efficient detection and decoding. The methods are computationally efficient and capable of demonstrating impressive results, however, the markers are not explicitly designed to stand out in natural environments and their robustness is difficult to infer from relatively limited analysis. Worsening performance in challenging image capture scenarios - such as poorly exposed images, motion blur, and off-axis viewing - sheds light on their limitations. The method introduced in this work is an end-to-end trainable method for designing fiducial markers and a complimentary detector. By introducing back-propagatable marker augmentation and superimposition into training, the method learns …

Stability Analysis Of Systems With Time Delay Simulation Program, Matthew Carroll, Brandon Replogle

Electrical Engineering

A small company wants to develop a CAD tool, ideally as part of the MATLAB suite of tools, for system stability analysis of nonlinear control systems with time-delay. The program must allow the designer to input the system block diagram graphically, then using symbolic expansion, automatically generate the Laplace domain stability boundary and disturbance settling time. The stable regions are then to be graphically plotted as a set of 2- or 3-dimensional parametric stability boundaries. The designer can then input performance constraints on the system through the MATLAB console and a Simulink environment will automatically be generated.

This program is …

Evaluating Driving Performance Of A Novel Behavior Planning Model On Connected Autonomous Vehicles, Keyur Shah

Honors Scholar Theses

Many current algorithms and approaches in autonomous driving attempt to solve the "trajectory generation" or "trajectory following” problems: given a target behavior (e.g. stay in the current lane at the speed limit or change lane), what trajectory should the vehicle follow, and what inputs should the driving agent apply to the throttle and brake to achieve this trajectory? In this work, we instead focus on the “behavior planning” problem—specifically, should an autonomous vehicle change lane or keep lane given the current state of the system?

In addition, current theory mainly focuses on single-vehicle systems, where vehicles do not communicate with …

A Quantile-Based Approach For Transmission Expansion Planning, Jairo Cervantes, F. Fred Choobineh

Department of Electrical and Computer Engineering: Faculty Publications

Transmission expansion planning is an integral part of power system planning and consists of generating and selecting transmission proposals for maintaining sufficient transmission capacity to satisfy the electric load. Specifically, the desire to increase the use of renewable energy has exposed the limitations of transmission networks and has elevated the importance of transmission expansion planning. However, considering the random nature of renewable sources in conjunction with the power outages makes the planning process very challenging. We present a new procedure for selecting the best transmission enhancement proposal from a set of finite proposals under uncertainty. The selection is based on …

Impact Of Large-Scale Correlated Failures On Multilevel Virtualized Networks, Max G. Medina, Mohammed J.F. Alenazi, Egemen K. Cetinkaya

Electrical and Computer Engineering Faculty Research & Creative Works

Communication network architectures have been evolving with increased programmability and virtualization of physical infrastructures. While this evolution enables a faster introduction of new services and efficient utilization of resources, the complexities and interdependencies among the physical and virtual infrastructures, as well as the control and management planes, hinder a complete understanding of the system at hand. It is imperative, therefore, to model and study these evolving virtualized infrastructures. We propose a multilevel virtualized network embedding model and study its performance against correlated failures. Our analysis of multiple synthetic network models identified that grid-like infrastructures capture the realistic Internet2 structure the …

An Efficient Reliability Simulation Tool For Lifetime-Aware Analog Circuit Synthesis, Engi̇n Afacan

Turkish Journal of Electrical Engineering and Computer Sciences

Time-dependent degradation (aging) has become more severe in modern CMOS technologies. Therefore, it is highly critical to capture the variation effects and design reliable circuits against aging. Simulation of time-dependent variations is quite complicated since the degradation is a function of time, where the step count of simulation directly affects the accuracy and the efficiency of the analysis. Commercial simulator tools use a constant step count during reliability simulations, in which choosing a large step count degrades the efficiency whereas keeping it small may result in accuracy problems. To overcome this bottleneck, a couple of different approaches have been proposed …

Investigation Of Host Nanotube Parameters For Enhancing The Performance Of Nanostructured Cds-Cdte Solar Cells, Deepak Kumar

Theses and Dissertations--Electrical and Computer Engineering

Numerical simulations are performed to investigate the effects of host nanotube parameters (pore diameter and pitch for different CdS coverages) and CdTe doping density on device performance in nanowire CdS/ CdTe solar cells using SCAPS-1D. This research finds the optimum values for these parameters in order to achieve the highest efficiency. Experimentally the effect of anodization voltage and fluoride ion concentration on the pore diameter and the pitch are studied for the Titania nanotubes host. It is observed that in the range of 0.3 mL to 2 mL of ammonium fluoride content, pore diameter and the pitch of the Titania …

The Trolley Problem In Virtual Reality, Jungsu Pak, Ariane Guirguis, Nicholas Mirchandani, Scott Cummings, Uri Maoz

Student Scholar Symposium Abstracts and Posters

Would people react to the Trolley problem differently based on the medium? Immersive Virtual Reality Driving Simulator was used to examine participants respond to the trolley problem in a realistic and controlled simulated environment.

Development Of An Autonomous Aerial Toolset For Agricultural Applications, Terrance Life

Mahurin Honors College Capstone Experience/Thesis Projects

According to the United Nations, the world population is expected to grow from its current 7 billion to 9.7 billion by the year 2050. During this time, global food demand is also expected to increase by between 59% and 98% due to the population increase, accompanied by an increasing demand for protein due to a rising standard of living throughout developing countries. [1] Meeting this increase in required food production using present agricultural practices would necessitate a similar increase in farmland; a resource which does not exist in abundance. Therefore, in order to meet growing food demands, new methods will …

A Virtual-Reality Training Simulator For Cochlear Implant Surgery, Blake Jones, Seyed Alireza Rohani, Nelson Ong, Tarek Tayeh, Hanif M. Ladak, Ahmad Chalabi, Sumit K. Agrawal

Electrical and Computer Engineering Publications

No abstract provided.