Electrical and Computer Engineering Commons^™

Wireless Smart Electric Meter Operation Under Data Security Attacks, Patrick Nnaji, Harsh Kumar, Sanjeev Kumar

Electrical and Computer Engineering Faculty Publications

Wireless Smart meters are increasingly being deployed by the utility companies to remotely collect power consumption data from customer premise periodically in real time. It gives utility companies the information needed to efficiently administer their customers for their electricity usage. Knowing how critical these data are, it is important to ensure that data recorded locally at the smart meters or communicated remotely or wirelessly are both confidential and reliable. Despite the efforts being made to secure the smart meter data, security threats on smart meters continue to evolve at the same time, with an increasing number of security breaches happening …

Autonomous Teaming Of Multileader System - Robust Cluster Formation Approach, Maryam N. Naleini

Electrical Engineering Dissertations - Archive

The cluster consensus problem of Multileader MAS Is considered and the clustering problem of interconnected multileader systems is formulated as a disturbance attenuation problem. For the first time, it's proved that the multileader MAS can reach cluster consensus without limiting the communication between the clusters. The combination of Small Gain Theorem and H8 optimization has been designed in the graphical differential game platform to prove the stability for the system. At the end, an online off-policy reinforcement learning algorithm is developed to find the solution to the H8 optimal problem of multileader MAS with completely unknown systems.

Machine Learning For Target Detection Using Uwb Radar Sensor Networks, Dheeral Naresh Bhole

Electrical Engineering Dissertations - Archive

Machine learning (ML) has recently been used to solve critical problems. This dissertation focuses on developing systems using Ultra-Wideband (UWB) wireless sensor networks and machine learning to solve critical tasks such as target detection in various challenging scenarios. These tasks have been researched for several years and efforts have been made to achieve universal solutions. In the first part of this dissertation, we have proposed a system to detect metallic targets in foliage environment. Mission critical systems need to be ready for the harsh working environment such as dense foliage, water bodies, rain, heavy winds and other natural challenges. Extreme …

Improvement For Mimo Systems By Increasing Antenna Isolation And Shaping Radiation Pattern Using Hybrid Network, Min Li, Yujie Zhang, Fan Jiang, Di Wu, Kwan Lawrence Yeung, Lijun Jiang, Ross Murch

Electrical and Computer Engineering Faculty Research & Creative Works

In this article, a novel method is proposed to design a hybrid network (HN) to increase isolation and shape radiation patterns for multiple-input multiple-output (MIMO) antenna systems. The HN is a combination of a decoupling feeding network and a defected ground network, which are populated by several surface-mounted reactive components whose reactances are determined by the N-ary optimization algorithm. Two decoupling examples are presented to validate the design methodology and elaborate on the design procedure. Measurement results show that the HN helps to realize impedance matching with reflection coefficients below -10 dB, isolation improvement from -5.4/-8.9 dB to below -20 …

Denoising And Deconvolving Sperm Whale Data In The Northern Gulf Of Mexico Using Fourier And Wavelet Techniques, Kendal Mccain Leftwich

LSU New Orleans Theses and Dissertations

The use of underwater acoustics can be an important component in obtaining information from the oceans of the world. It is desirable (but difficult) to compile an acoustic catalog of sounds emitted by various underwater objects to complement optical catalogs. For example, the current visual catalog for whale tail flukes of large marine mammals (whales) can identify even individual whales from their individual fluke characteristics. However, since sperm whales, Physeter microcephalus, do not fluke up when they dive, they cannot be identified in this manner. A corresponding acoustic catalog for sperm whale clicks could be compiled to identify individual …

Design And Comparison Of Asynchronous Fft Implementations, Julie Bigot

Graduate Theses and Dissertations

Fast Fourier Transform (FFT) is a widely used digital signal processing technology in a large variety of applications. For battery-powered embedded systems incorporating FFT, its physical implementation is constrained by strict power consumption, especially during idle periods. Compared to the prevailing clocked synchronous counterpart, quasi-delay insensitive asynchronous circuits offer a series of advantages including flexible timing requirement and lower leakage power, making them ideal choices for these systems. In this thesis work, various FFT configurations were implemented in the low-power Multi-Threshold NULL Convention Logic (MTNCL) paradigm. Analysis illustrates the area and power consumption trends along the changing of the number …

Reliability Enhancing Control Algorithms For Two-Stage Grid-Tied Inverters, Yuheng Wu

Graduate Theses and Dissertations

In the photovoltaic (PV) generation system, two types of grid-tied inverter systems are usually deployed: the single-stage grid-tied inverter system and the two-stage grid-tied inverter system. In the single-stage grid-tied inverter system, the input of the inverter is directly connected to the PV arrays, while an additional dc-dc stage is inserted between the PV arrays and the dc-ac inverter in the two-stage design. The additional dc-dc stage could provide a stable dc-link voltage to the inverter, which also enables new design possibilities, including the multi-MPPT operation and solar-plus-storage application. Thus, the two-stage grid-tied inverter has been widely used in the …

An Integrated Electronic-Skin Patch For Real-Time And Continuous Monitoring Of A Panel Of Biomarkers Combined With Drug Delivery, Tanzila Noushin

Electrical Engineering Theses

Inflammatory biomarkers present in the human body play a vital role in medical field by guiding the clinician in decision-making for many diseases. The levels of these inflammatory biomarkers are associated with the severity and progress of several diseases. Researchers have found that increasing severity of many diseases such as cardiovascular disease, after surgery infection, and adverse clinical outcomes due to infectious diseases, results in the elevation of the level of inflammatory biomarkers in human sweat. Furthermore, the inflammatory cytokines indicate the pathophysiology and prognosis of critically ill SARS‑CoV‑2 patients. In this thesis work, different sensors have been developed for …

Low Power Multi-Channel Interface For Charge Based Tactile Sensors, Samuel Hansen

Department of Electrical and Computer Engineering: Dissertations, Theses, and Student Research

Analog front end electronics are designed in 65 nm CMOS technology to process charge pulses arriving from a tactile sensor array. This is accomplished through the use of charge sensitive amplifiers and discrete time filters with tunable clock signals located in each of the analog front ends. Sensors were emulated using Gaussian pulses during simulation. The digital side of the system uses SAR (successive approximation register) ADCs for sampling of the processed sensor signals.

Adviser: Sina Balkır

A Low-Power, Low-Area 10-Bit Sar Adc With Length-Based Capacitive Dac, Zhili Pan

Department of Electrical and Computer Engineering: Dissertations, Theses, and Student Research

A 2.5 V single-ended 10-bit successive-approximation-register analog-to-digital converter (SAR ADC) based on the TSMC 65 nm CMOS process is designed with the goal of achieving low power consumption (33.63 pJ/sample) and small area (2874 µm^2 ). It utilizes a novel length-based capacitive digital-to-analog converter (CDAC) layout to achieve low total capacitance for power efficiency, and a custom static asynchronous logic to free the dependence on a high-frequency external clock source. Two test chips have been designed and the problems found through testing the first chip are analyzed. Multiple improved versions of the ADC with minor variations are implemented on the …

Modeling, Control And Estimation Of Reconfigurable Cable Driven Parallel Robots, Adhiti Raman Thothathri

All Dissertations

The motivation for this thesis was to develop a cable-driven parallel robot (CDPR) as part of a two-part robotic device for concrete 3D printing. This research addresses specific research questions in this domain, chiefly, to present advantages offered by the addition of kinematic redundancies to CDPRs. Due to the natural actuation redundancy present in a fully constrained CDPR, the addition of internal mobility offers complex challenges in modeling and control that are not often encountered in literature.

This work presents a systematic analysis of modeling such kinematic redundancies through the application of reciprocal screw theory (RST) and Lie algebra while …

Detection, Tracking, And Classification Of Aircraft And Birds From Multirotor Small Unmanned Aircraft Systems, Chester Valentine Dolph

Electrical & Computer Engineering Theses & Dissertations

The ability for small Unmanned Aircraft Systems (sUAS) to safely operate beyond visual line of sight (BVLOS) is of great interest to governments, businesses, and scientific research. One critical element for sUAS to operate BVLOS is the capability to avoid other air traffic. While many aircraft will be cooperative and broadcast their locations using Automatic Dependent Surveillance Broadcast (ADS-B), it is expected that many aircraft will remain non-cooperative – meaning they do not communicate position or flight plan to other aircraft. Avoiding mid-air collisions with non-cooperative aircraft is a critical limitation to widespread sUAS flying BVLOS. Examples of non-cooperative traffic …

Optimized Learning Using Fuzzy-Inference-Assisted Algorithms For Deep Learning, Miroslava Barua

Open Access Theses & Dissertations

For years, researchers in Artificial Intelligence (AI) and Deep Learning (DL) observed that performance of a Deep Learning Network (DLN) could be improved by using larger and larger datasets coupled with complex network architectures. Although these strategies yield remarkable results, they have limits, dictated by data quantity and quality, rising costs by the increased computational power, or, more frequently, by long training times on networks that are very large. Training DLN requires laborious work involving multiple layers of densely connected neurons, updates to millions of network parameters, while potentially iterating thousands of times through millions of entries in a big …

Processes & Toolchain For Automation Of Hybrid Direct-Write 3d Printing, Gilbert Thomas Carranza

Open Access Theses & Dissertations

Hybrid 3D printing has evolved from a means to rapidly prototype devices to a fully viable means of manufacturing final products. In particular, electronic and electromagnetic devices have been a focus of hybrid 3D printing multi material structures. However, while the hardware capabilities have been around for years, the software capabilities have only begun to catch up. A process and toolchain for hybrid 3D printing is critically needed.This work details a process and toolchain for hybrid 3D printing metal dielectric structures. In it, a basic slicing algorithm is shown along with off-axis printing and conformal printing for arbitrary curvatures. These …

Engineering 3d Bioprinted Cardiac Spheroidal Droplets With Cardiomyocytes And Cardiac Fibroblasts For Tissue Engineering And Drug Cytotoxicity Studies, Raven El Khoury

Open Access Theses & Dissertations

Engineering is the supreme human endeavor that involves harnessing the scientific understanding of the natural world to design and invent objects to improve the society around us. Biomedical engineering is the implementation of concepts acquired from engineering in biology and medicine that aims to improve human health through the integration of engineering with biomedical sciences. The mission of a biomedical engineer is to develop technologies that help advance the quality of peopleâ??s health using various tools and materials with one passion and goal: making the patient's life longer and easier. Tissue engineering is developed from the field of biomaterials and …

Pioneering Concepts For 3d Electromagnetics, Cesar Valle

Open Access Theses & Dissertations

This work introduces two paradigm changing concepts that will push electromagnetics (EM) to the third dimension. The first of that work involves the introduction of the conformal Spatially Variant Lattice (SVL) algorithm that can conform any periodic structure onto arbitrary curvature. The algorithms robustness is confirmed by conforming a frequency selective surface (FSS) onto an extreme paraboloid, proving the algorithms robustness on high sloping surfaces. Three FSSs were made in total; a standard flat FSS, a projected FSS, and a FSS made through the conformal SVL algorithm. Measured results are shown and match well to simulation.Secondly, in the world of …

An Overview Of Bidirectional Electric Vehicles Charging System As A Vehicle To Anything (V2x) Under Cyber–Physical Power System (Cpps), Onur Elma, Umit Cali, Murat Kuzlu

Engineering Technology Faculty Publications

Nowadays, EVs are rapidly increasing in popularity, and are accepted as the vehicles of the future all over the world. The most important components are their battery and charging systems. The energy capacity of EVs’ batteries has a significant potential to supply different energy requirements. Therefore, EVs must be designed in accordance with bidirectional power flow, and Electric Vehicle Supply Equipment (EVSE) should be upgraded as Electric Vehicle Power Exchange Equipment (EVPE). This power exchange infrastructure can be called Vehicle-to-Anything (V2X). V2X will also be the key solution for energy grids of the future that will turn into a much …

Resistive Switching Characteristics Of Fullerene (C60) In Polymannose Thin Film, Kuan Yew Cheong, Ilias Ait Tayeb, Feng Zhao

Electrical and Computer Engineering Faculty Research & Creative Works

The effects of C60 incorporated in polymannose-based resistive switching memory have been systematically investigated for the first time in bioorganic-based resistive switching memory. C60 with different concentrations (0–7 wt.%) is dispersed in polymannose precursor, drop-casted on ITO/PET substrate, and dried to form a thin film. Electrochemically inert Au–Pd is used as top electrode. The devices with embedded C60 show better endurance and stability. Read memory window decreases and ON/OFF ratio increases as the concentration of C60 increases. Stable retention time up to 10 years is achieved for all of the devices except the one with 7 wt.% C60. Based on …

Integrative Physiology-Coupled Pilot-Centered Flight Simulation, Shawn C. Harrison

Electrical & Computer Engineering Theses & Dissertations

Maintaining the pilot’s physiological performance envelope within the limits of human capabilities may be crucial for avoiding hazardous physiological episodes in fighter aircraft that compromise safety. The main physiological episode of interest is impaired pilot respiration, better known as hypoxia caused by a high fraction of inspired oxygen (FiO₂) at high altitudes and variation in accelerative gravitational forces (g-forces). Integrated into fighter aircraft is an Onboard Oxygen Generating System (OBOGS) developed to mitigate the necessity of gaseous and liquid oxygen cannisters [1]. OBOGS act as a life support in hypoxic environments by providing oxygen-rich air, thereby oxygenating the …

E-Beam Irradiation Beamline At Jefferson Lab For Wastewater Treatment, Xi Li

Electrical & Computer Engineering Theses & Dissertations

Electron beam (e-beam) irradiation is an advanced method for removing the emerging organic contaminants in wastewater, such as 1,4-dioxane, and per- and polyfluoroalkyl substances (PFAS), which have the potential to be regulated in the near future but are difficult to degrade by conventional treatment methods. This dissertation was based on a collaborating study between Jefferson Lab (Jlab) and Hampton Roads Sanitation District (HRSD) to evaluate the impacts of e-beam irradiation on the degradation of 1,4-dioxane and PFAS. It presents the detailed design of an e-beam irradiation beamline, the beamline simulation using general particle tracer (GPT), the installation, and the successful …

Safety-Aware Longitudinal And Lateral Control Of Autonomous Vehicles, Randy Guadalupe Chapa

Theses and Dissertations

Safety is undoubtedly the most critical design requirement regarding autonomous vehicle controllers. This research considers an autonomous vehicle to keep a desired distance from the leader vehicle, as well as stay centered within the lane. To achieve this, the lateral control problem and the combined longitudinal and lateral control problem were studied. Adaptive control laws were proposed with the aid of the backstepping technique and the barrier function technique. Simulation was done to verify the effectiveness of the proposed control laws.

Simncore: Multilevel Cache Memory Design Simulator For Manycore System, Provashish Roy

Theses and Dissertations

The current trend in a processor design has moved from multicore to manycore (tens to hundreds, or more cores) to support more computational power based on parallelism. One of challenges is how to handle such large number of cores’ data in cache memories through an efficient inter-core communication and cache coherence. To meet the demand, this paper presents a manycore cache memory simulator for research and education purposes. The proposed simulator, called as SIMNCORE, is to design and evaluate various multi-level, such as L1 and L2, cache memories for manycore processing. The SIMNCORE will implement various trace files collected from …

Synthesis And Characterization Of Vo2 Thin Films On Piezoelectric Substrates, Samee Azad

All Theses

Polycrystalline VO₂ thin films synthesized on two piezoelectric substrates (AT-cut quartz and GaN/AlGaN/GaN/Si) using low pressure direct oxidation technique have been characterized and compared to VO₂ grown on traditional non-piezoelectric substrates sapphire and SiO₂/Si. X-ray diffraction and atomic force microscopy characterization performed on the as grown films confirmed high quality of the VO₂ films grown on both the piezoelectric and non-piezoelectric substrates. Changes in material properties associated with the semiconductor metal transition (SMT) of the VO₂ films were investigated through resistivity and transmitted optical power changes measured across the SMT. It was observed that …

Oam-Based Wavelets In A High Speed Optical Probing System For Measuring The Angular Decomposition Of The Environment, Justin Free

All Theses

This thesis presents the theoretical development of orbital angular momentum (OAM) based wavelets for the analysis of localized OAM information in space. An optical probing system for generating and detecting these wavelets is demonstrated; individual wavelets can scan the environment in 10µs or less. The probing system was applied to a three-dimensional atmospheric turbulence distribution to obtain a continuous wavelet transform of the angular information of the turbulent propagation path about a fixed radius. An entire continuous wavelet transform was measured in 3.8ms; the measurements are much faster than the turbulence and give insight into the short time scale of …

Soc Reconfigurable Architecture For Software-Trained Neural Networks On Fpga, Michael Wasef

Boise State University Theses and Dissertations

Neural networks are extensively used in software and hardware applications. In hardware applications, it is necessary to implement a small, accelerated, and configurable hardware architecture to be easily embedded in hardware devices to implement and execute the required neural network with superior performance. Such configurable hardware architecture allows the user to implement neural networks with different structures and easily modify or change them as needed.

In this dissertation, three architectures, each containing three layers, have been designed using a system-on-chip approach and implemented on a Field Programmable Gate Array (FPGA), to realize and accelerate the performance of three types of …

Dual-Band Circularly Polarized Shared Aperture Antenna For Cubesat Communication System, Syed Salman Kabir

Graduate Theses and Dissertations (2019 - present)

For space exploration, a special class of small satellite known as CubeSat, has become popular in academia and industry in recent years. Due to its low cost and short development time, researchers prefer CubeSat over large-scale satellites wherever possible. In academia, CubeSat has major applications in the field of space atmosphere, space-to-ground communication, weather forecasting, etc. Like other spacecrafts, CubeSat uses multiple antennas in different frequency bands to establish a communication link with ground stations. Recent CubeSat missions are generating a large amount of data which cannot be downlinked using conventional antennas. The demand for a compact antenna system that …

Nonlinear Observers For Burning Zone Temperatures And Torque Estimation Of The Rotary Cement Kiln., Bhagyashri Aditya Bhagwat

Electronic Theses and Dissertations

Due to consistent expansion in the infrastructure and housing sectors worldwide have given a new way for the rapid growth of global cement market. Increased global demand for the cement production makes the attractive research topic which can lead to the quality and overall efficiency of the product. Measurement of the temperature in the burning zone is vital to maintain product quality and kiln efficiency in the cement industry. Often the BZT is un-measurable due to internal kiln conditions, dusty environment, extreme heat, harshness for example and this leads to kiln not being driven as efficient as possible. Multi-physics tools …

Design, Evaluation, And Control Of Nexus: A Multiscale Additive Manufacturing Platform With Integrated 3d Printing And Robotic Assembly., Danming Wei

Electronic Theses and Dissertations

Additive manufacturing (AM) technology is an emerging approach to creating three-dimensional (3D) objects and has seen numerous applications in medical implants, transportation, aerospace, energy, consumer products, etc. Compared with manufacturing by forming and machining, additive manufacturing techniques provide more rapid, economical, efficient, reliable, and complex manufacturing processes. However, additive manufacturing also has limitations on print strength and dimensional tolerance, while traditional additive manufacturing hardware platforms for 3D printing have limited flexibility. In particular, part geometry and materials are limited to most 3D printing hardware. In addition, for multiscale and complex products, samples must be printed, fabricated, and transferred among different …

Smartphone Detector, Ryan Coldiron

Electrical Engineering

There is a wide variety of times when it is unacceptable to be using a smartphone, and this device could help to minimize when people are using their devices. People have become more and more reliant on their various pieces of technology such as their smartphones, and are often using them when they should be paying attention in class, attending an important meeting, watching a movie, or should just be present to their other surroundings. A device that could detect the use of smartphones at these inopportune times would be something that would benefit a wide variety of people.

The …

Battery Energy Storage System, Carlos Gonzalez, Philip Tafoya, Mariely Caraballo, William Hoang

Electrical Engineering

The Battery Energy Storage System (BESS) project consists of bringing an existing photovoltaic battery energy storage system into service within Cal Poly’s Energy Conversion Lab. Information regarding the BESS is limited to the existing manuals as the original equipment manufacturer has ceased supporting the product in the United States. Results from previous projects on the BESS speculated that a DC input may be required to enable the system’s to be fully operational. The goal of the project is to provide a DC input into BESS and test the system’s functionality. Initially, a Photovoltaic Thevenin Equivalent was expected to be utilized …