Electrical and Computer Engineering Commons^™

Diy Cell Incubator, Hayden James Jeanor

Electrical Engineering

The purpose of creating a cell Incubator is for the development of cell and tissue production in laboratory settings. Large scale research projects and the medical community grow cells for various reasons, including experiments and creating tissue for patients. However, they cannot simply depend on growing cells in a petri dish that sit on a rack at room temperature. To grow heathy cells in the fastest way possible, they use cell incubators. Cell incubators create an atmosphere within the incubation bay that is designed to promote cell growth. The three main components that need to be constantly regulated, using a …

A Control Integrated Circuit For A Hysteretic Flyback Power Converter, Armani Alvarez

UNLV Theses, Dissertations, Professional Papers, and Capstones

This Thesis reports the design, simulation, and layout of a switching power supply controller chip for a fly-back switching power supply. The controller chip was designed using ON’s Semiconductor C5 process. The resulting switching power supply using the controller chip consists of using various off-chip components such as a power MOSFET, transformer, and capacitors. The main components used in the integrated circuit include a bandgap reference voltage circuit which outputs a reference voltage of 1.25V, a ring oscillator having a nominal frequency of 5MHz, a high-gain comparator, and a buffer that can drive a 5pF capacitor. Under normal simulation conditions …

Effective Short Text Classification Via The Fusion Of Hybrid Features For Iot Social Data, Xiong Luo, Zhijian Yu, Zhigang Zhao, Wenbing Zhao, Jenq-Haur Wang

Electrical and Computer Engineering Faculty Publications

Nowadays short texts can be widely found in various social data in relation to the 5G-enabled Internet of Things (IoT). Short text classification is a challenging task due to its sparsity and the lack of context. Previous studies mainly tackle these problems by enhancing the semantic information or the statistical information individually. However, the improvement achieved by a single type of information is limited, while fusing various information may help to improve the classification accuracy more effectively. To fuse various information for short text classification, this article proposes a feature fusion method that integrates the statistical feature and the comprehensive …

High-Performance Vlsi Architectures For Lattice-Based Cryptography, Weihang Tan

All Dissertations

Lattice-based cryptography is a cryptographic primitive built upon the hard problems on point lattices. Cryptosystems relying on lattice-based cryptography have attracted huge attention in the last decade since they have post-quantum-resistant security and the remarkable construction of the algorithm. In particular, homomorphic encryption (HE) and post-quantum cryptography (PQC) are the two main applications of lattice-based cryptography. Meanwhile, the efficient hardware implementations for these advanced cryptography schemes are demanding to achieve a high-performance implementation.

This dissertation aims to investigate the novel and high-performance very large-scale integration (VLSI) architectures for lattice-based cryptography, including the HE and PQC schemes. This dissertation first presents …

Enhancing The Performance Of Poly(3-Hexylthiophene) Based Organic Thin-Film Transistors Using An Interface Engineering Method, Eyob Negussie Tarekegn

All Dissertations

An original design and photolithographic fabrication process for poly(3-hexylthiophene-2, 5-diyl) (P3HT) based organic thin-film transistors (OTFTs) is presented. The structure of the transistors was based on the bottom gate bottom contact OTFT. The fabrication process was efficient, cost-effective, and relatively straightforward to implement. Current–voltage (I-V) measurements were performed to characterize the primary electronic properties of the transistors. The measured mobility of these transistors was significantly higher than most results reported in the literature for other similar bottom gate bottom contact P3HT OTFTs. The higher mobility is explained primarily by the effectiveness of the fabrication process in keeping the interfacial layers …

Permanently-Installed Distributed Pressure Sensors For Downhole Applications, Xuran Zhu

All Dissertations

Technology advancements (e.g., hydraulic fracturing and horizontal drilling) to recover unconventional oil and gas (UOG) resources are critical in maintaining future U.S. oil and gas production levels. Permanently installed distributed downhole pressure sensors could monitor fracture propagation, assess the effectiveness of hydraulic fracturing, and optimize hydraulic fracturing placement so that overall UOG recovery efficiency can be increased. However, the harsh environment (high temperatures, high pressures, strong vibration, and presence of brine, mud, debris, hydrate, and various gases), the long data telemetry distance, and the requirements of reliability and service lifetime make the downhole monitoring a very challenging task. To combat …

Multi-Criteria Performance Evaluation And Control In Power And Energy Systems, Payam Ramezani Badr

All Dissertations

The role of intuition and human preferences are often overlooked in autonomous control of power and energy systems. However, the growing operational diversity of many systems such as microgrids, electric/hybrid-electric vehicles and maritime vessels has created a need for more flexible control and optimization methods. In order to develop such flexible control methods, the role of human decision makers and their desired performance metrics must be studied in power and energy systems. This dissertation investigates the concept of multi-criteria decision making as a gateway to integrate human decision makers and their opinions into complex mathematical control laws. There are two …

Implementation Of Sic Power Electronics For Green Energy Based Electrification Of Transportation, Naireeta Deb

All Dissertations

Increase in greenhouse gas emission poses a threat to the quality of air thus threatening the future of living beings on earth. A large part of the emission is produced by transport vehicles. Electric vehicles (EVs) are a great solution to this threat. They will completely replace the high usage of hydrocarbons in the transport sector. Energy efficiency and reduced local pollution can also be expected with full implementation of electrification of transportation. However, the current grid is not prepared to take the power load of EV charging if it were to happen readily. Moreover, critics are doubtful about the …

Improved Compact Modeling Of High Voltage Gallium Nitride High Electron Mobility Transistors, Md Maksudul Hossain

Graduate Theses and Dissertations

Since power converters shape a wide range of power electronic applications, the 'heart' of these conversions, such as solid-state switches, is crucial for achieving higher power density, lower loss, and higher efficiency operations. Although the limitations imposed by silicon-based power devices have been reduced by introducing novel devices such as IGBTs and super junction MOSFETs to allow for broader applications, solutions beyond silicon have presented a continuous challenge to the device engineers. Driving these converters at a higher switching frequency allows for higher power density. However, to support a higher frequency and operating temperature, superior materials, e.g., wide bandgap materials, …

Electrical Modeling For Dynamic Performance Prediction And Optimization Of Mcpms Layout, Quang Minh Le

Graduate Theses and Dissertations

In recent years, the fast development of Multichip Power Modules (MCPM) packaging and Wide Bandgap (WBG) technology has enabled higher voltage and current ratings, better thermal performance, lower parasitic parameters, and higher mechanical reliability. However, the design of the MCPM layout is a multidisciplinary problem leading to many time-consuming analyses and tedious design processes. Because of these challenges, the design automation tool for MCPM layout has become an emerging research area and gained much attention from the power electronics community. The two critical objectives of a design automation tool for MCPM layout are fast and accurate models for design insights …

Using Molecular Dynamics Simulations To Decipher Mechanistic Details Of Biomolecular Processes Of Biology And Biotechnology Oriented Applications, Adithya Polasa

Graduate Theses and Dissertations

Researchers in chemistry and biology often utilize computer simulations, in conjunction with experimental data, to model and predict the structures, energies, kinetics, processes, and functions of the systems that are their focus of study, ranging from single molecules to whole viruses. Here, we use molecular dynamics (MD) techniques to gain a deeper understanding of biomolecular processes in biology and biotechnology-oriented applications. Using a mixture of equilibrium and non-equilibrium MD simulations, this work describes the insertion process of YidC at the atomic level. In order to better comprehend the insertion process, several docking models of YidC-Pf3 in the lipid bilayer were …

Ambient Air-Processed Cspbi3-Based Perovskite Solar Cell Via Semi-Sputtering Deposition And Numerical Studies Of Cs3sb2i9-Based Perovskite Solar Cell, Shamik Datta

Theses and Dissertations

Commercialization of Perovskite solar cells as a clean energy source can augment the reduction of carbon footprint. CsPbI3, a well-known perovskite material, has been synthesized in ambient air and high-humidity conditions and utilized as the active layer in a perovskite solar cell. The rest of the solar cell layers have been sputter-deposited. This solar cell with a p-i-n configuration ITO/NiOx/CsPbI3/ZnO/Au exhibited a champion efficiency of 3.7%. Nonetheless, lead incorporation in the conventional Pb-cation-based perovskites poses an environmental threat. The physical proximity of living organisms to lead point sources exhibits a wide spectrum of negative consequences. In this study, we have …

Fostering Collaboration In Emerging Three-Tiered Spectrum Markets, Anindo Mahmood

Theses and Dissertations

Ensuring optimum spectral efficiency is a critical requirement for current wireless networks to cope with the ever-growing flow of wireless data traffic, using limited spectral resources. As such, spectrum sharing, which allows different grades of users, as well as multiple networking standards to co-exist and utilize in the same frequency band, has become a topic of great intrigue. Due to the inherent advantages of these schemes, the US government has opened up vast amounts of federal spectrum that supports spectrum sharing. The Citizens Broadband Radio Service (CBRS) proposed by the Federal Communications Commission (FCC) is one of them. A tiered …

Event-Based Obstacle Detection With Commercial Lidar, Chaz Cornwall

All Graduate Theses and Dissertations, Spring 1920 to Summer 2023

Computerized obstacle detection for moving vehicles is becoming more important as vehicle manufacturers make their systems more autonomous and safe. However, obstacle detection must operate quickly in dynamic environments such as driving at highway speeds. A unique obstacle detection system using 3D changes in the environment is proposed. Furthermore, these 3D changes are shown to contain sufficient information for avoiding obstacles. To make the system easy to integrate onto a vehicle, additional processing is implemented to remove unnecessary dependencies. This system provides a method for obstacle detection that breaks away from typical systems to be more efficient.

Modeling And Control Of Battery Management Systems With High-Frequency Ac Link Coupled Multiport Series Resonant Converters For 2nd Life Battery Applications, Brooks Jace Maughan

All Graduate Theses and Dissertations, Spring 1920 to Summer 2023

While the use and production of Electric Vehicles becomes more prevalent, it is also important to make this economical and ensure the reduction of a carbon footprint. Second-life batteries can satisfy both problems as batteries can be used in a second-life application for lower power purposes such as supplementing the grid so the infrastructure needed to charge the expanding fleet of Electric Vehicles can be easily supplied. This thesis goes through the process of Active Cell Balancing which will produce equal capacities, or similar batteries, that can be more efficiently used in these and other types of second-life applications. The …

Path Planning For Aircraft Under Threat Of Detection From Ground-Based Radar With Uncertainty In Aircraft And Radar States, Austin D. Costley

All Graduate Theses and Dissertations, Spring 1920 to Summer 2023

Mission planners for manned and unmanned aircraft operating within the detection range of ground-based radar systems are often concerned with the probability of detection. Several factors influence the probability of detection, including aircraft position and orientation, radar position, and radar performance parameters. Current path planning algorithms assume that these factors are known with certainty, but in practice, these factors are estimated and have some uncertainty.

This dissertation explores methods to consider the uncertainty in the detection factors for an aircraft path planner. First, the detection model is extended to include uncertainty in the aircraft position and orientation, radar position, and …

Hybrid Multilevel Converters With Internal Cascaded/Paralleled Structures For Mv Electric Aircraft Applications, Fei Diao

Graduate Theses and Dissertations

Using on-board medium voltage (MV) dc distribution system has been a megatrend for next-generation electric aircraft systems due to its ability to enable a significant system mass reduction. In addition, it makes electric propulsion more feasible using MV power electronic converters. To develop high-performance high-density MV power converters, the emerging silicon carbide (SiC) devices are more attractive than their silicon (Si) counterparts, since the fast switch frequency brought by the SiC can effectively reduce the volume and weight of the filter components and thus increase the converter power density. From the converter topology perspective, with the MV dc distribution, the …

A Voice And Facial Recognition System To Protect Students From Being Forgotten Inside School Buses In The Kingdom Of Saudi Arabia, Ibrahim Alferaih

Theses and Dissertations

In this research, we discuss the situation of students in the three to eight year old age group. Every day in the Kingdom of Saudi Arabia during school days, more than 1,000,000 students are transported throughout the country by more than 15,000 school buses. Everything is dependent on the human element. During school transportation around the world, many children are forgotten inside the school bus and with many of them eventually going missing or even dying. The bus driver is usually busy and tired due to the focus on the road, which may make him lose focus on those on …

Deep Learning Approach To Speech Recognition: A Signal Extractor & Producer For Artificial General Intelligence, Ahmad Zuhair S. Hasanain

Theses and Dissertations

The efficient use of a communication bandwidth starts with the data source. The features of the speech signals can be extracted and reconstructed to lower the Internet traffic of the acoustic artificial agents and to increase the quality of the automatic speech recognition systems. The Speech Quefrency Transform (SQT) is hereby introduced in the work to enrich the communication space between the artificial agents and mankind. We describe the motivation, methodology, and deep learning approach in detail as we apply the SQT technology to several applications: sharp pitch track extraction, real-time speech communications, and emotion recognition. The results were excellent. …

Effects Of A Non-Uniform Magnetic Field On The Current Flow Of Silicon Photodiodes And Solar Cells, Jason J. Buranich

Theses and Dissertations

This research investigates an approach to improve efficiency of low-cost devices by applying an external arched magnetic field to p-n junction devices to observe the effect such a magnetic field would have on the flow of charge carriers. Electro-optic p-n junction devices of photodiodes and solar cells were designed and fabricated to incorporate the dimensions of commercially available neodymium magnets. The devices were placed in the magnetic fields created by the magnets then current and voltage characteristics were measured via a 4-point probe setup. These measurements were compared to measurements taken from the same devices when not in the magnetics …

Numerical Modeling And Simulating Thermal Performance Of Printed Circuit Boards, Paul R. Ziegenfelder

All Graduate Theses and Dissertations, Spring 1920 to Summer 2023

This research investigates how heat transfer theory can be applied to evaluate the thermal performance of printed circuit board (PCB) designs. A model was developed for correlating theory to the physical parameters relating to the construction of the PCB and a computer application was developed to perform the thermal analysis. The application allows the importation of common PCB design files for a straightforward and quick analysis of a PCB design’s thermal performance. The application is open-source to allows for further development and free access from the public.

Raman Scattering Measurements And Analyses Of Gan Thin Films Grown On Zno Substrates By Metalorganic Chemical Vapor Deposition, Zane Mcdaniel, Zhe Chuan Feng, Kevin Stokes

Symposium of Student Scholars

Metalorganic chemical vapor deposition (MOCVD) is a popularly used method of growing thin films of GaN on ZnO (GZ) substrates, which pair well due to their structural and characteristic similarities. In this research, optical characterization of the surface quality of GZ sample films is measured by analyzing Raman scattering (RS) using a Renishaw inVia spectrometer fitted with a 532nm laser. Samples were grown in an improved double injection block rotating disc reactor. Multiple samples' spectra show broad peaks that correspond with the E2 (high) and A1 (LO) branches of GaN, and nicely fitted curves are observed for the characteristic E2 …

Dynamic Perimeter Movement Using Uavs And Robotic Systems, Nayeli Barrett, John Lawson, Billy Kihei

Symposium of Student Scholars

For this study, we propose a Dynamic Perimeter Movement system that has a user-operated UAV to identify GPS coordinate points using land markers such as April Tags. These markers would be used to identify the perimeter of a road work zone. Once the work zone is determined, autonomous robotic traffic cones would disperse to position themselves around the perimeter determined by coordinate points. As the work zone progresses the UAV would periodically update the perimeter to reposition robotic traffic cones. These traffic cones will operate using a Pure Pursuit system as a means to navigate.

Parallel Distributed Compensation-Pid Controller Design For Maximum Power Point Tracking Of Dynamic Loaded Photovoltaic System, Anas Shomer, Helmy El Zoghby, Mohiy E. Bahgat, Soliman Sharaf

Future Engineering Journal

Control issues come from the output voltage of PV installations and systems operating in a range of irradiance and temperature. By using a DC converter, such systems are able to maintain a constant output voltage despite fluctuations in the generated voltage and load. The design of a maximum power point tracking (MPPT) on DC converter controller is presented in this article for a system. Fractional Order-Proportional Integral Derivative (FO-PID) and Parallel Distributed Compensation-Proportional Integral Derivative (PDC-PID) controllers have been implemented to the system converter as a proposed control approach. Particle Swarm Optimization (PSO) is used as optimization technique for determining …

Performance Comparison Of Several Control Algorithms For Tracking Control Of Pantograph Mechanism, Laylaa Mahmoud Eng, Mohamed Shamseldin Dr, Mohamed Sallam Dr, Abdelghany Mohamed Prof

Future Engineering Journal

A sort of parallel manipulator known as a pantograph robot mechanism was created primarily for industrial requests that required high precision and satisfied speed. While tracking a chosen trajectory profile requires a powerful controller. Because it has four active robot links and one robot passive link in place of just two links like the open chain does, it can carry more loads than the open chain robot mechanism while maintaining accuracy and stability. The calculated model for a closed chain pantograph robot mechanism presented in this paper takes into account the boundary conditions. For the purpose of simulating the dynamics …

Relative Rate Observer Self-Tuning Of Fuzzy Pid Virtual Inertia Control For An Islanded Microgrid, Ahmed H. Mohamed, Helmy M. El Zoghby, Mohiy Bahgat, A. M. Abdel Ghany

Future Engineering Journal

Expanding the usage of renewable energy in islanded microgrids leads to a reduction in its total inertia. Low inertia microgrids have difficulties in voltage and frequency control. That affected saving its stability and preventing a blackout. To improve low inertia islanded microgrids' dynamic response and save their stability, this paper presented relative rate observer self-tuning fuzzy PID (RROSTF-PID) based on virtual inertia control (VIC) for an islanded microgrid with a high renewable energy sources (RESs) contribution. RROSTF-PID based on VIC's success in showing remarkable improvement in the microgrid's dynamic response and enhancement of its stability. Moreover, it handles different contingency …

Research On Stability And Resilience Of Modern Power Systems, Yi Zhou

USF Tampa Graduate Theses and Dissertations

With more and more renewable energy generation integrated into the utility grid, the modern power system circumstance and its operating characteristics have changed significantly. Since most renewable energy resources are inverter-based resources (IBR), the prominent characteristics of the power electronics and the cyber distribution in the renewable energy generation system make the power grid stability more diverse and complex.

This dissertation addresses the power system resilience problems from two points of view. The first one is from the inverter level, which deals with the problems of short circuit ratio (SCR) drop. With low SCR, the IBR system operation point may …

Cybersecurity And Dynamic Operation In Practice: Equipment Impacts And Safety Guarantees, Kip Nieman, Dominic Messina, Matthew Wegener, Helen Durand

Chemical Engineering and Materials Science Faculty Research Publications

Though dynamic operation of chemical processes has been extensively explored theoretically in contexts such as economic model predictive control or even considering the potential for cyberattacks on control systems creating non-standard operating policies, important practical questions remain regarding dynamic operation. In this work, we look at two of these with particular relevance to process safety: (1) evaluating dynamic operating policies with respect to process equipment fidelity and (2) evaluating procedures for determining the parameters of an advanced control law that can promote both dynamic operation as well as safety if appropriately designed. Regarding the first topic, we utilize computational fluid …

Review On Oxygen-Free Vanadium-Based Cathodes For Aqueous Zinc-Ion Batteries, Xiao-Ru Yun, Yu-Fang Chen, Pei-Tao Xiao, Chun-Man Zheng

Journal of Electrochemistry

Aqueous zinc-ion batteries (AZIBs) are considered as one of the most promising next-generation electrochemical energy storage systems owing to their high-power density, environmental benign, intrinsic safety, and the low cost of the abundant zinc resources. However, their further development is still plagued by the inferior electrochemical performance of cathode materials. Though extensive research has been conducted to investigate various cathode materials (including manganese oxides, vanadium oxides, Prussian blues analogy, and organic materials), design of high-performance cathodes with satisfying capacity and long-term cycling stability still faces great challenges. Oxygen-free vanadium-based compounds, owing to their better conductivity, larger interlayer spacing, lower ion …

Recognition Of Modern Modulated Waveforms With Applications To Abms And Vdats Test Program Set Development, Sylwester Sobolewski

USF Tampa Graduate Theses and Dissertations

A newly developed, near real-time, well-performing and potentially universally applicable Automatic Modulation Recognition (AMR) technique for discrimination of numerous modern modulated waveforms found in commercial as well as military communication systems applicable to the new Air Force’s Advanced Battle Management & Surveillance (ABMS) framework as well as Versatile Depot Automatic Test Station (VDATS) Test Program Set (TPS) development is presented. It involves generating complex feature vectors composed of High-Order Direct Cumulant, Cyclostationary and Fourier of Wavelet Transform features created with the help of Principal Component Analysis and Variance Data Compression.

Twelve modulated waveforms are used to evaluate the performance of …