Electrical and Computer Engineering Commons^™

Designing And Implementing A Micro-Controller Based Primary-Side Sensing Flyback Converter For Leds Driver, Nam Nhat Tran

Graduate Theses and Dissertations

The fast development of LED and its applications has enabled a new generation of lighting device with higher efficiency and long lifespan. By employing a primary-side sensing flyback converter and the PIC18F micro-controller series, an LED driver could achieve two important features: (1) the compatibility with the available lighting fixtures, and (2) reducing unit price. The flyback converter was chosen for its simplicity, competitive low cost, and its ability to provide a constant output current, a necessarily important factor to an LED driver. Meanwhile, the PIC18F micro-controller series offer numerous advanced features which include but not limited to pulse-width modulation …

Nanofabrication Of Metallic Nanostructures And Integration With Light Detection Devices, Liang Huang

Graduate Theses and Dissertations

Metallic nanostructures have been investigated with various applications especially for integration with light detection devices. The incident light can be manipulated by those nanostructures to enhance light absorption therefor improve device performance. However, previous studies focused on optical design. The electrical properties of these integrated light detection devices have not been fully considered. The photon generated carriers transport and collection are critical for light detection devices as well. An optimized device platform considering from both the optical and electrical aspects to fully utilize these nanostructures is highly desired for future light detection devices.

This dissertation targeted on three objectives, beginning …

Optimization Of Plasmon Decay Through Scattering And Hot Electron Transfer, Drew Dejarnette

Graduate Theses and Dissertations

Light incident on metal nanoparticles induce localized surface oscillations of conductive electrons, called plasmons, which is a means to control and manipulate light. Excited plasmons decay as either thermal energy as absorbed phonons or electromagnetic energy as scattered photons. An additional decay pathway for plasmons can exist for gold nanoparticles situated on graphene. Excited plasmons can decay directly to the graphene as through hot electron transfer. This dissertation begins by computational analysis of plasmon resonance energy and bandwidth as a function of particle size, shape, and dielectric environment in addition to diffractive coupled in lattices creating a Fano resonance. With …

Electroencephalography(Eeg) Data Collection And Processing Through Machine Learning, Jayshree Desai

Graduate Theses and Dissertations

Machine learning methods are an excellent way for understanding the neural basis of human decision making. Some machine learning systems try to eradicate the need for human intuition in data analysis whereas others embrace a collective approach between humans and machines. The objective of this project is to collect Electroencephalography (EEG) signals through wireless sensors, and the process the collected signals through machine learning methods. The EEG data is collected using three EEG electrodes, each being the positive, negative and ground terminals respectively. Since the signal measures in the unit of micro-volts it needs to be amplified using amplifier circuit. …

Optimum Design Of Spectral Efficient Green Wireless Communications, Gang Wang

Graduate Theses and Dissertations

This dissertation focuses on the optimum design of spectral efficient green wireless communications. Energy efficiency (EE), which is defined as the inverse of average energy required to successfully deliver one information bit from a source to its destination, and spectral efficiency (SE), which is defined as the average data rate per unit bandwidth, are two fundamental performance metrics of wireless communication systems. We study the optimum designs of a wide range of practical wireless communication systems that can either maximize EE, or SE, or achieve a balanced tradeoff between the two metrics. There are three objectives in this dissertation. First, …

Unbalanced Current Static Compensator, Manuel Antonio Sanchez Tejada

Graduate Theses and Dissertations

The objective of this thesis is to present and evaluate a solution to the unbalanced current issue that can be found in three-phase electrical power grids. The solution is named unbalanced current static compensator (UCSC) and has the goal of balancing the currents at the source in order to mitigate adverse issues such as of negative- and zero-sequence currents that are generated by three-phase current unbalances.

The solution topology consists of three single-phase H-bridge converters that are controlled through an algorithm working in the d-q frame of reference. The algorithm is divided in three different stages: the phase synchronization and …

Improving Golf Putt Performance With Statistical Learning Of Eeg Signals, Qing Guo

Graduate Theses and Dissertations

In this thesis, a machine learning based method is proposed to predict the putt outcomes of golfers based on their electroencephalogram (EEG) data. The method can be used as a core building block of a brain-computer interface, which is designed to provide guidance to golf players based on their EEG patterns. The proposed method includes three steps. First, multi-channel 1-second EEG trials were extracted during golfers' preparation of putting. Second, different features are calculated such as correlation coefficient, power spectrum density and coherence, which are used as features for the classification algorithm. To predict golfers' performance, the support vector machine …

Properties Of Multiferroic Bifeo3 From First Principles, Dovran Rahmedov

Graduate Theses and Dissertations

In this dissertation, a first-principle-based approach is developed to study magnetoelectric effect in multiferoic materials. Such approach has a significant predictive power and might serve as a guide to new experimental works. As we will discuss in the course of this work, it also gives an important insight to the underlying physics behind the experimentally observed phenomena.

We start by applying our method to investigate properties of a generic multiferroic material. We observe how magnetic susceptibility of such materials evolves with temperature and compare this evolution with the characteristic behavior of magnetic susceptibility for pure magnetic systems. Then we focus …

Synthesis And Characterization Of Nanocrystals And Their Application For Photodetectors, Ahmad Nusir

Graduate Theses and Dissertations

Room temperature operation is considered one of the essential restrictions in the design of electronic devices. Photodetectors are unable to detect light efficiently at room temperature due to high dark currents. Semiconductor nanocrystals possess unique optical and electrical properties which make them ideal for fabricating uncooled photodetectors. In this project, nanocrystals were synthesized and implemented in devices that detect light at room temperature.

Nanocrystalline I-III-VI2 and II-VI semiconductors (CuInS2 and CdSe) were grown by a wet chemical method, and characterized using: optical absorption, photoluminescence, Raman scattering, and x-ray diffraction. The optical absorption and photoluminescence spectra of the nanocrystals were recorded …

Fabrication Of Single Nanowire Device Using Electron Beam Lithography, Thach Pham

Graduate Theses and Dissertations

One dimensional nanostructure materials such as nanowires have drawn many interests among the scientific community for a wide range of applications such as field-effect transistors [1], [2], inverters[3], light-emitting diode [1], lasers [4], nanosensors [5], [6], and photodetectors [7]... Comparing with the characterization of nanowire arrays, characterizing a single nanowire will definitely provide a better understanding on new nanowire properties due to simplified behaviors of devices. Although promising theories could be drawn from those results, fabrication of test structure for single nanowire measurements cannot be easily processed using standard microfabrication techniques. Therefore, electron beam lithography integrated with photolithography technique has …

Broadband Nanostructured Antireflection Coating For Enhancing Inas/Gaas Quantum Dots Solar Cells Performance, Jony C. Sarker

Graduate Theses and Dissertations

The broadband suppression in reflection is one of the primary focuses in high efficiency solar cell research. In this thesis, a moth-eye inspired nanostructure antireflection coating is fabricated on InAs/GaAs quantum dots solar cell in order to enhance the power conversion efficiency. The abrupt refractive index transition between air and GaAs surface is replaced by a tapering zinc oxide nanoneedle on planar tantalum pentoxide coating. The antireflection structure provides gradual reduction of refractive index away from the solar cell top surface.

The nanostructured antireflection coating is fabricated by utilizing chemical bath deposition of tapered zinc oxide nanoneedles on planar tantalum …

High Temperature Ltcc Based Sic Double-Sided Cooling Power Electronic Module, Hao Zhang

Graduate Theses and Dissertations

This objective of this dissertation research is to investigate a module packaging technology for high temperature double-sided cooling power electronic module application. A high-temperature wire-bondless low-temperature co-fired ceramic (LTCC) based double-sided cooling power electronic module was designed, simulated and fabricated. In this module, the conventional copper base plate is removed to reduce the thermal resistance between the device junctions to the heat sink and to improve the reliability of the module by eliminating the large area solder joint between the power substrate and the copper base plate. A low-temperature co-fired ceramic (LTCC) substrate with cavities and vias is used as …

Investigation Of The Effects Of Rapid Thermal Annealing On Mbe Grown Gaasbi/Gaas Heterostructures For Optoelectronic Devices, Perry C. Grant

Graduate Theses and Dissertations

High efficiency optoelectronic devices rely on high quality materials making up the device structure. The scope of this thesis investigates the effectiveness of rapid thermal annealing (RTA) at improving the material quality of GaAsBi/GaAs heterostructures. During the fabrication of a device, the contacts of the device had the rapid thermal annealing process accomplished to produce ohmic contacts and this research explored if this annealing treatment degraded the quantum wells that made up the active region of a device. To investigate these effects, a system to measure the photoluminescence of the material system was constructed utilizing Fourier Transform Infrared Spectroscopy. The …

Microfluidics Guided By Redox-Magnetohydrodynamics (Mhd) For Lab-On-A-Chip Applications, Vishal Sahore

Graduate Theses and Dissertations

Unique microfluidic control actuated by simply turning off and on microfabricated electrodes in a small-volume system was investigated for lab-on-a-chip applications. This was accomplished using a relatively new pumping technique of redox-magnetohydrodynamics (MHD), which as shown in this dissertation generated the important microfluidic features of flat flow profile and fluid circulation. MHD is driven by the body force, FB = j × B, which is the magnetic part of the Lorentz force equation, and its direction is given by the right hand rule. The ionic current density, j, was generated in an equimolar solution of potassium ferri/ferro cyanide by applying …

Monodentate, Bidentate And Photocrosslinkable Thiol Ligands For Improving Aqueous Biocompatible Quantum Dots, Hiroko Takeuchi

Graduate Theses and Dissertations

Water-soluble Quantum Dots (QDs) are highly sensitive fluorescent probes that are often used to study biological species. One of the most common ways to render QDs water-soluble for such applications is to apply hydrophilic thiolated ligands to the QD surface. However, these ligands are labile and can be easily exchanged on the QD surface, which can severely limit their application. As one way to overcome this limitation while maintaining a small colloidal size of QDs, we developed a method to stabilize hydrophilic thiolated ligands on the surface of QDs through the formation of a crosslinked shell using a photocrosslinking approach. …

Design, Fabrication And Characterization Of Plasmonic Fishnet Structures For The Enhancement Of Absorption In Thin Film Solar Cells, Sayan Seal

Graduate Theses and Dissertations

Incorporating plasmonic structures into the back spacer layer of thin film solar cells (TFSCs) is an efficient way to improve their performance. The fishnet structure; which is a tunable, plasmonic light scatterer is used to enhance light absorption. Unlike other plasmonic particles that have been previously suggested, the fishnet is an electrically connected wire mesh and does not result in electric field localization, hence it results in greater absorption in the intrinsic Si layer. Unlike other designs, the fishnet structure is placed in the back spacer layer of the TFSC, so it does not block any incident light. There is …

Development And Evaluation Of Chitosan Particle Based Antigen Delivery Systems For Enhanced Antigen Specific Immune Response, Bhanuprasanth Koppolu

Graduate Theses and Dissertations

Particle-based vaccine delivery systems are under exploration to enhance antigen-specific immunity against safe but poorly immunogenic polypeptide antigens. Chitosan is a promising biomaterial for antigen encapsulation and delivery due to its ability to form nano- and microparticles in mild aqueous conditions thus preserving the antigenicity of loaded polypeptides. The objective of this work is to develop a chitosan particle based antigen delivery system for enhanced vaccine response. Chitosan particle sizes, which ranged from 300 nm to 3 ìm, were influenced by chitosan concentration, chitosan molecular weight and addition rate of precipitant salt. The composition of precipitant salt played a significant …

Zinc Oxide Nanorod Based Ultraviolet Detectors With Wheatstone Bridge Design, Arun Vasudevan

Graduate Theses and Dissertations

This research work, for the first time, investigated metal semiconductor-metal (MSM) zine oxide (ZnO) nanorod based ultra-violet (UV) detectors having a Wheatstone bridge design with a high

responsivity at room temperature and above, as well as a responsivity that was largely independent of the change in ambient conditions. The ZnO nanorods which acted as the sensing element of the detector were grown by a chemical growth technique. Studies were conducted to determine the effects on ZnO nanorod properties by varying the concentration of the chemicals used for the rod growth. These studies showed how the rod diameter and the deposition …

A Solar-Powered And Multi-Tiered Mesh Node For A Portable In Situ Emergency Response System, Adam Matthews

Graduate Theses and Dissertations

The aftermath of a natural disaster is typically characterized by lack of a reliable medium for dissemination of information to survivors. Current state-of-the-art emergency response systems rely on satellite radio-enabled devices, but survivors, unlike first responders, do not have access to such devices. To mitigate this problem, we present PERPETUU a solar-powered portable GIS microserver. The microserver node can be deployed in a disaster scene, and can serve maps to survivors viewable on browsers of off-the-shelf mobile systems. A key innovation in the design of the PERPETUU node is a multi-tiered hardware architecture-the system combines a low-power micro-controller, a medium-power …

Distortion-Tolerant Communications With Correlated Information, Ning Sun

Graduate Theses and Dissertations

This dissertation is devoted to the development of distortion-tolerant communication techniques by exploiting the spatial and/or temporal correlation in a broad range of wireless communication systems under various system configurations. Signals observed in wireless communication systems are often correlated in the spatial and/or temporal domains, and the correlation can be used to facilitate system designs and to improve system performance. First, the optimum

node density, i.e., the optimum number of nodes in a unit area, is identified by utilizing the spatial data correlation in the one- and two-dimensional wireless sensor networks (WSNs), under the

constraint of fixed power per unit …

A Reconfigurable Digital-To-Analog Converter With Supply Invariant Linearity, Nicholas J. Chiolino

Graduate Theses and Dissertations

A novel reconfigurable digital-to-analog converter (DAC) with supply independent linearity is presented. The process agnostic converter achieves wide supply range operation and re-configurability by being charge based. This converter consists of a 7-bit parallel digital input control core and an analog "summing" core utilizing charging capacitors with an operational transconductance amplifier in a voltage-follower configuration. This topology is highly configurable to allow for optimization across process voltages, step sizes and low power operation. The specification of the DAC is (1) supply independence (2) low power operation (3) operation up to 200 kHz and (4) conversion control through a DAC enable …

A Wide Bandgap Silicon Carbide (Sic) Gate Driver For High Temperature, High Voltage, And High Frequency Applications, Ranjan Raj Lamichhane

Graduate Theses and Dissertations

The potential of silicon carbide (SiC) for modern power electronics applications is revolutionary because of its superior material properties including substantially better breakdown voltage, power density, device leakage, thermal conductivity, and switching speed. Integration of gate driver circuitry on the same chip, or in the same package, as the power device would significantly reduce the parasitic inductance, require far less thermal management paraphernalia, reduce cost and size of the system, and result in more efficient and reliable electrical and thermal performance of the system.

The design of a gate driver circuit with good performance parameters in this completely new under-development …

Analysis Of Parameter Tuning On Energy Efficiency In Asynchronous Circuits, Justin Thomas Roark

Graduate Theses and Dissertations

Power and energy consumption are the primary concern of the digital integrated circuit (IC) industry. Asynchronous logic, in the past several years, has increased in popularity due to its low power nature. This thesis analyzes a collection of array multipliers with different parameters to compare two asynchronous design paradigms, NULL Convention Logic (NCL) and Multi-Threshold NULL Convention Logic (MTNCL). Several commercially available pieces of software and custom scripts are used to analyze the asynchronous circuits and their components to provide the energy consumption estimation on various parts of each circuit. The analysis of the software results revealed that MTNCL circuits …

Design And Fabrication Of Inverter And Rectifier Modules For Indirect Matrix Converter Applications, Saikishore Talakokkula

Graduate Theses and Dissertations

In power converter applications, silicon carbide (SiC) power semiconductor devices are preferred over their silicon counterparts due to many advantages such as wide bandgap, high junction temperatures and low on-state resistance. The SiC devices provide reduced conduction and switching losses. Due to the above mentioned advantages the power conversion efficiency of SiC devices is better compared to that of silicon (Si) devices.

This thesis studies the implementation of 1200V/17A Normally-off SiC JFETs for an indirect matrix converter (IMC) application. A discussion on the parasitic inductance optimization is presented based on the electromagnetic simulation results extracted from the Ansoft Q3D extractor. …

Multiscale Study Of Batio3 Nanostructures And Nanocomposites, Lydie Louis Louis

Graduate Theses and Dissertations

Advancements in integrated nanoelectronics will continue to require the use of unique materials or systems of materials with diverse functionalities in increasingly confined spaces.

Hence, research on finite-dimensional systems strive to unearth and expand the knowledge of fundamental physical properties in certain key materials which exhibit numerous concurrent and exploitable functions.

Correspondingly, ferroelectric nanostructures, which particularly display a plethora of complex phenomena, prevalent in countless fields of research, are noteworthy candidates. Presently, however, the assimilation of zero-(0D) and one-dimensional (1D) ferroelectric into micro- or nano-electronics has been lagging, in part due to a lack of applied and fundamental studies but …

High Voltage Direct Current Energy Transmission Using Modular Multilevel Converters, David Alejandro Guzman Pinzon

Graduate Theses and Dissertations

This thesis focus on high voltage direct current (HVdc) energy transmission using modular multilevel converter (MMC) based terminals. It provides a brief comparison between different HVdc technologies, focusing on voltage source converters (HVdc-VSC) with the MMC-based terminal emerging as the topology of choice for ratings less than 1 GW. The controllers for a two-terminal HVdc-link are analyzed and Matlab/Simulink^TM simulation models are presented. The simplified models and full Matlab/Simulink^TM based model are used to select the gains for the MMC controllers. Simulation results carried out on the full model validated the proposed methodologies. A new control technique that …

System Design And Motion Artifact Removal Algorithm Implementation For Ambulatory Women Ecg Measurement System:E-Bra System, Hyeokjun Kwon

Graduate Theses and Dissertations

Cardio Vascular Disease (CVD) leads to sudden cardiac death due to irregular phenomenon of the cardiac signal by the abnormal case of blood vessel and cardiac structure. For last three decades, there is an enhanced interest in research for cardiac diseases.. As a result, the death rate by cardiac disease in men has been falling gradually compared with relatively increasing the death rate for women due to CVD. The main reason for this phenomenon is due to the lack of seriousness to female CVD and different symptoms of female CVD compared with the symptoms of male CVD. Usually, because the …

Electrical Design Considerations And Packaging Of Power Electronic Modules, Shijie Wang

Graduate Theses and Dissertations

A modern power electronic module can save significant energy usage in the power electronic systems by improving their switching efficiencies. One way to improve the efficiency of the power electronic module is to reduce its parasitic circuit elements. The purpose of this thesis is to investigate the mitigation of parasitic circuit elements in power electronic modules. General methods of mitigating parasitic inductances were analyzed by the Q3D Extractor and verified by the time-domain reflectometry (TDR) measurements. In most cases, the TDR measurement results closely matched those predicted by the Q3D Extractor. These methods were applied to design and analyze a …

Cad Tool Design For Ncl And Mtncl Asynchronous Circuits, Vijay Mani Pillai

Graduate Theses and Dissertations

This thesis presents an implementation of a method developed to readily convert Boolean designs into an ultra-low power asynchronous design methodology called MTNCL, which combines multi-threshold CMOS (MTCMOS) with NULL Convention Logic (NCL) systems. MTNCL provides the leakage power advantages of an all high-Vt implementation with a reasonable speed penalty compared to the all low-Vt implementation, and has negligible area overhead. The proposed tool utilizes industry-standard CAD tools. This research also presents an Automated Gate-Level Pipelining with Bit-Wise Completion (AGLPBW) method to maximize throughput of delay-insensitive full-word pipelined NCL circuits. These methods have been integrated into the Mentor Graphics and …

Reliability Analysis Of Social Networks, Kellie R. Schneider

Graduate Theses and Dissertations

The primary focus of this dissertation is on the quantification of actor interaction and the dissemination of information through Social networks. Social networks have long been used to model the interactions between people in various Social and professional contexts. These networks allow for the explicit modeling of the complex interrelations between relevant individuals within an organization and the role they play in the decision making process. This dissertation considers Social networks represented as network flow models in which actors have the ability to provide some level of influence over other actors within the network. The models developed incorporate performance metrics …