Electrical and Computer Engineering Commons^™

Measuring The Electrical Properties Of 3d Printed Plastics In The W-Band, Noah Gregory

Electrical Engineering Undergraduate Honors Theses

3D printers are a method of additive manufacturing that consists of layering material to produce a 3D structure. There are many types of 3D printers as well as many types of materials that are capable of being printed with. The most cost-effective and well documented method of 3D printing is called Fused Deposition Modeling (FDM). FDM printers work by feeding a thin strand of plastic filament through a heated extruder nozzle. This plastic is then deposited on a flat, typically heated, surface called a print bed. The part is then built by depositing thin layers of plastic in the shape …

Framework Of Hardware Trojan Detection Leveraging Structural Checking Tool, Rafael Dacanay Del Carmen

Graduate Theses and Dissertations

Since there is a significant demand for obtaining third-party soft Intellectual Property (IP) by first-party integrated circuit (IC) vendors, it is becoming easier for adversaries to insert malicious logic known as hardware Trojans into designs. Due to this, vendors need to find ways to screen the third-party IPs for possible security threats and then mitigate them. The development of the Structural Checking (SC) tool provides a solution to this issue. This tool analyzes the structure of an unknown soft IP design and creates a network of all the signals within the design and how they are connected to each other. …

Analysis And Optimization Of The Two-Phase Series Capacitor Buck Dc-Dc Converter, Salahaldein Ali Aboajila Ahmed

Graduate Theses and Dissertations

Current sharing schemes for conventional multi-phase converters are based on sensing each phase current to deliver the current information to their controllers. In conventional buck converters, this fact may require a preset current sharing ratio at the expense of efficiency, which eventually requires a larger sensing circuit to achieve the sensing accuracy of each phase. Introducing the concept of automatic current sharing is one of the solutions to tackle this issue. Automatic current sharing (Current Sharing Mechanism CSM) is an advanced way to distribute heat generation in multi-phase switching topologies at full load. A two-phase series capacitor buck converter (2-pscB) …

Diffusive Dynamics Of Biological Macromolecules In The Cytoplasm Of Live Bacteria, Asmaa Sadoon

Graduate Theses and Dissertations

Bacteria are small organisms that play important roles in our bodies and in maintaining our surrounding environment. However, bacterial infections are considered as one of the health diseases that threatens the lives of humans. Resistance of bacteria to antibiotics has made treating bacterial infections more challenging. With the emergence of many developed optical techniques, it has become possible to study various biological mechanisms of molecules inside these small organisms with high resolution and precise localization. In this research, single particle tracking photoactivation localization microscopy (sptPALM) technique was used to investigate the dynamics of fluorescent histonelike nucleoid-structuring proteins (H-NS) in live …

Structural Checking Tool Restructure And Matching Improvements, Derek Taylor

Graduate Theses and Dissertations

With the rising complexity and size of hardware designs, saving development time and cost by employing third-party intellectual property (IP) into various first-party designs has become a necessity. However, using third-party IPs introduces the risk of adding malicious behavior to the design, including hardware Trojans. Different from software Trojan detection, the detection of hardware Trojans in an efficient and cost-effective manner is an ongoing area of study and has significant complexities depending on the development stage where Trojan detection is leveraged. Therefore, this thesis research proposes improvements to various components of the soft IP analysis methodology utilized by the Structural …

A Novel Data Lineage Model For Critical Infrastructure And A Solution To A Special Case Of The Temporal Graph Reachability Problem, Ian Moncur

Graduate Theses and Dissertations

Rapid and accurate damage assessment is crucial to minimize downtime in critical infrastructure. Dependency on modern technology requires fast and consistent techniques to prevent damage from spreading while also minimizing the impact of damage on system users. One technique to assist in assessment is data lineage, which involves tracing a history of dependencies for data items. The goal of this thesis is to present one novel model and an algorithm that uses data lineage with the goal of being fast and accurate. In function this model operates as a directed graph, with the vertices being data items and edges representing …

Live Access Control Policy Error Detection Through Hardware, Bryce Mendenhall

Graduate Theses and Dissertations

Access Control (AC) is a widely used security measure designed to protect resources and infrastructure in an information system. The integrity of the AC policy is crucial to the protection of the system. Errors within an AC policy may cause many vulnerabilities such as information leaks, information loss, and malicious activities. Thus, such errors must be detected and promptly fixed. However, current AC error detection models do not allow for real-time error detection, nor do they provide the source of errors. This thesis presents a live error detection model called LogicDetect which utilizes emulated Boolean digital logic circuits to provide …

Photoassisted Nanoscale Memory Resistors, Amir Shariffar

Graduate Theses and Dissertations

Memristors or memory resistors are promising two-terminal devices, which have the potential to revolutionize current electronic memory technologies. Memristors have been extensively investigated and reported to be practical devices, although they still suffer from poor stability, low retention time, and laborious fabrication processes.

The primary aim of this project was to achieve a device structure of quantum dots or thin films to address a fundamental challenge of unstable resistive switching behavior in memristors. Moreover, we aimed to investigate the effects of light illumination in terms of intensity and wavelength on the performance of the fabricated memristor. The parameters such as …

Carrier Injection To In0.4Ga0.6As/Gaas Surface Quantum Dots In Coupled Hybrid Nanostructures, Jingtao Liu, Shiping Luo, Xiao Liu, Ying Wang, Chunsheng Wang, Shufang Wang, Guangsheng Fu, Yuriy I. Mazur, Morgan E. Ware, Gregory J. Salamo, Baolai Liang

Electrical Engineering Faculty Publications and Presentations

Stacking growth of the InGaAs quantum dots (QDs) on top of a carrier injection layer is a very useful strategy to develop QD devices. This research aims to study the carrier injection effect in hybrid structures with a layer of In0.4Ga0.6As surface quantum dots (SQDs), coupled to an injection layer of either one layer of In_0.4Ga_0.6As buried QDs (BQDs) or an In_0.15Ga_0.85As quantum well (QW), both through a 10 nm GaAs thin spacer. Spectroscopic measurements show that carrier capture and emission efficiency for SQDs in the BQD injection structure is better than …

Design And Optimization Of High Temperature Optocouplers As Galvanic Isolation, Abbas Sabbar, Syam Madhusoodhanan, Huong Tran, Binzhong Dong, Jiangbo Wang, H. Alan Mantooth, Shui-Qing Yu, Zhong Chen

Electrical Engineering Faculty Publications and Presentations

The commercial InGaN-based (blue and green) and AlGaInP-based (red) multiple quantum well (MQW) lighting emitting diodes (LEDs) were studied in a wide range of temperatures up to 800 K for their light emission and detection (i.e., LEDs operated under reverse bias as photodiodes (PDs)) characteristics. The results indicate the feasibility of integrating a pair of selected LEDs to fabricate high temperature (HT) optocouplers, which can be utilized as galvanic isolation to replace the bulky isolation transforms in the high-density power modules. A detailed study on LEDs and PDs were performed. The external quantum efficiency (EQE) of the LED and PDs …

High-Temperature Analysis Of Optical Coupling Using Algaas/Gaas Leds For High-Density Integrated Power Modules, Syam Madhusoodhanan, Abbas Sabbar, Huong Tran, Pengyu Lai, David Gonzalez, H. Alan Mantooth, Shui-Qing Yu, Zhong Chen

Electrical Engineering Faculty Publications and Presentations

A low-temperature co-fired ceramic (LTCC)-based optocoupler design is demonstrated as a possible solution for optical isolation in high-density integrated power modules. The design and fabrication of LTCC based package are discussed. Commercially available aluminum gallium arsenide/gallium arsenide (AlGaAs/GaAs) double heterostructure is used both as emitter and photodetector in the proposed optocoupler. A detailed study on the electroluminescence and spectral response of the AlGaAs/GaAs structure is conducted at elevated temperatures. The material figure of merit parameter, D*, is calculated in the temperature range 77-800 K. The fabricated optocoupler is tested at elevated temperatures, and the results are presented.

Global Modeling Of Millimeter-Wave Transistors: Analysis Of Electromagnetic-Wave Propagation Effects, Soheil Nouri, Samir M. El-Ghazaly

Electrical Engineering Faculty Publications and Presentations

In this study, the transmission line concept and the electron transport theory are consolidated in a global modeling approach, the wave-electron-transport (WET) model, to account for the physical phenomena in millimeter-wave devices. No equivalent circuit model is required to represent the innate properties of the device. Hence, the model is reliable for both small- and large-signal analyses. The electrodes of a transistor act as coupled multi-conductor transmission lines at millimeter-wave bands. The WET model consists of a device solver to obtain solutions for carrier-transport equations of the intrinsic device, and an electromagnetic solver (EM solver) to provide solutions for the …

Modular Expandable Multiinput Multioutput (Mimo) High Step-Up Transformerless Dc-Dc Converter, Zahra Saadatizadeh, Pedram Chavoshipour Heris, H. Alan Mantooth

Electrical Engineering Faculty Publications and Presentations

In this paper, a Multi-Input Multi-Output (MIMO) high step-up transformerless DC-DC converter is proposed. The proposed converter can expand the number of ports from both input and output terminals. Also, it has a modular structure using voltage multiplier cells (a switch, two diodes, a capacitor, and an inductor). The proposed converter is useful for a wide range of applications and has the merit of interfacing multiple hybrid voltage sources with each other to supply different loads with various voltage levels. All the output voltages of the output ports can be regulated at the same time by tuning separate controlling parameters. …

An Efficient Electro-Thermal Compact Mode Of Sic Power Mosfets Including Third Quadrant Behavior, Arman Ur Rashid, Md Maksudul Hossain, Yuheng Wu, Hayden Seth Carlton, H. Alan Mantooth, Britt Brooks

Electrical Engineering Faculty Publications and Presentations

This paper presents an efficient physics-based electro-thermal model that solves some advanced problems of modeling Silicon Carbide (SiC) power MOSFETs. It is the first electro-thermal model that simulates the temperature dependency of the first and the third quadrant characteristics, including the reverse recovery of the body diode accurately and efficiently. It extends from a previous work that demonstrated the isothermal physics-based model of the gate-dependent body diode. Physics-based temperature scaling of the first and third quadrant allows simulation of the self-heating effect in a wide range of temperatures (27 °C–200 °C), even for the synchronous operation. Moreover, a physics-based modeling …

Power Relay Based Multiple Device Cryogenic Characterization Method And Results, Yuqi Wei, Maksudul Hossain, Dereje Woldegiorgis, Xia Du, H. Alan Mantooth

Electrical Engineering Faculty Publications and Presentations

Cryogenic power electronics is a promising technology due to their high efficiency and high power density characteristics. As the key element of power electronic systems, semiconductor performance should be evaluated under cryogenic temperatures. Liquid nitrogen or liquid helium are usually adopted to achieve cryogenic temperatures. Traditionally, only one semiconductor can be evaluated at one time under different temperatures, which is time-consuming and not energy-friendly. To enable multiple-device characterization at one time under different temperatures, a novel power relay based characterization circuit and corresponding control strategy are described. With the aid of the proposed circuit, multiple devices can be characterized by …

Nonmetallic Jet Impingement Thermal Management For Power Electronics Via Additive Manufacturing, Reece Whitt

Graduate Theses and Dissertations

The increase in energy demanded by transportation and energy sectors has necessitated highly efficient thermal management for reliable power electronics operations. Conventional cooling techniques are limited by their inability to target switching location hot spot temperatures, leading to non-uniform thermal gradients. These devices, such as cold plates and heat sinks, also utilize heavy metallic structures that can accentuate electromagnetic interferences generated by high voltage switching processes. This work proposes a non-metallic jet impingement cooler for more customized thermal management, while simultaneously reducing the harmful effects of electromagnetic interferences. Additive manufacturing is utilized to enable jet impingement zones to target individual …

Mission Profile Effects On Automotive Drivetrain Electronics Reliability: Modeling And Mitigation, Bakhtiyar Mohammad Nafis

Graduate Theses and Dissertations

The reliability of electronic devices is dependent upon the conditions to which they are subject. Temperature variations coupled with differences in thermal expansion between bonded materials results in thermomechanical stresses to build up, which can instigate failure in the interconnects or other critical regions. With the move towards electrification in the automotive industry, there is the increasingly important consideration of powertrain electronics reliability, the pertinent conditions being governed by the drive cycle or mission profile of the vehicle. The mission profile determines the power dissipated by the electronic devices, which determines the peak and mean temperature, temperature swing and the …

Thermometry Via Diffusion In Ferrous Core-Shell Nanoparticles For Induction Heating Applications, Hayden Carlton

Graduate Theses and Dissertations

Induction heating causes the release of enormous amounts of heat from dispersed magnetic nanoparticles. While the rate of heat transfer can be easily quantified calorimetrically, measuring the temperature of the nanoparticles on the nanoscale presents experimental challenges. Fully characterizing the temperature and thermal output of these magnetic particles is necessary to gauge overall heating efficiency and to provide a more holistic understanding of heat transfer on the nanoscale. Herein, this dissertation seeks to develop a novel nanoparticle thermometry technique, which correlates diffusion behavior in core-shell nanoparticles to local temperature. Initial measurements suggested that heating silica capped ferrous nanoparticles (SCNPs) via …

Interplay Between The Lattice And Spin Degrees Of Freedom In Magnetoelectric And Magnetic Materials, Temuujin Bayaraa

Graduate Theses and Dissertations

This dissertation contains several investigations on the cross-coupling between structural and spin degrees of freedom in multiferroic and ferrimagnetic compounds by means of first-principles calculations and ab-initio-based Monte-Carlo simulations. We start with the reviews of magnetoelectricity, ferrimagnetism, strain engineering, followed by a brief introduction to first-principles computational methods, magnetic effective Hamiltonians, and other techniques that are utilized here. The results section of the dissertation can be divided into two parts. The first half focuses on magnetoelectric effects arising from different sources, while the second half is about the ferrimagnetic nature of materials. In the first part, we examine the epitaxial …

Investigation Of Optical And Structural Properties Of Gesn Heterostructures, Oluwatobi Gabriel Olorunsola

Graduate Theses and Dissertations

Silicon (Si)-based optoelectronics have gained traction due to its primed versatility at developing light-based technologies. Si, however, features indirect bandgap characteristics and suffers relegated optical properties compared to its III-V counterparts. III-Vs have also been hybridized to Si platforms but the resulting technologies are expensive and incompatible with standard complementary-metal-oxide-semiconductor processes. Germanium (Ge), on the other hand, have been engineered to behave like direct bandgap material through tensile strain interventions but are well short of attaining extensive wavelength coverage. To create a competitive material that evades these challenges, transitional amounts of Sn can be incorporated into Ge matrix to form …

A Double-Sided Stack Low-Inductance Wire-Bondless Sic Power Module With A Ceramic Interposer, Si Huang

Graduate Theses and Dissertations

The objective of this dissertation research is to develop a novel three-dimensional (3-D) wire bondless power module package for silicon carbide (SiC) power devices to achieve a low parasitic inductance and an improved thermal performance. A half-bridge module consisting of 900-V SiC MOSFETs is realized to minimize stray parasitic inductance as well as to provide both vertical and horizontal cooling paths to maximize heat dissipation. The proposed 3-D power module package was designed, simulated, fabricated and tested. In this module, low temperature co-fired ceramic (LTCC) substrate with vias is utilized as an interposer of which both top and bottom sides …

Multifunctional Programmable Self-Assembled Nanoparticles In Nanomedicine, Yoshie Sakamaki

Graduate Theses and Dissertations

Developing methodologies to control the architecture of nanoparticles (NPs) at the atomic level prevents their inhomogeneity and leads to a variety of expected functions. Rationally designed nanoparticles can either be programmed or crystallized structures into pre-determined structures achieving tunable particle pore size and physiochemistry. In this dissertation, two broad classes of multifunctional nanoparticles are developed, metal-organic frameworks and DNA-NP aggregates.

Metal-organic frameworks are a novel class of highly porous crystalline materials built from organic linkers and metal cluster-based secondary building units. However, applications in bioremediation have not been developed very well especially in applications regarding drug delivery systems (DDS). The …

Sigesn Light-Emitting Devices: From Optical To Electrical Injection, Yiyin Zhou

Graduate Theses and Dissertations

Si photonics is a fast-developing technology that impacts many applications such as data centers, 5G, Lidar, and biological/chemical sensing. One of the merits of Si photonics is to integrate electronic and photonic components on a single chip to form a complex functional system that features compact, low-cost, high-performance, and reliability. Among all building blocks, the monolithic integration of lasers on Si encountered substantial challenges. Si and Ge, conventional epitaxial material on Si, are incompetent for light emission due to the indirect bandgap. The current solution compromises the hybrid integration of III-V lasers, which requires growing on separate smaller size substrates …

Incorporation Of Zinc In Pre-Alloyed Cuin[Zn]S2/Zns Quantum Dots, Jean Carlos Morales Orocu

Graduate Theses and Dissertations

Since the early 2000s heavy-metal-free quantum dots (QDs) such as CuInS2/ZnS have attempted to replace CdSe, their heavy-metal-containing counterparts. CuInS2/ZnS is synthesized in a two-step process that involves the fabrication of CuInS2 (CIS) nanocrystals (NCs) followed by the addition of zinc precursors. Instead of the usual core/shell architecture often exhibited by binary QDs, coating CIS QDs results in alloyed and/or partially alloyed cation-exchange (CATEX) QDs. The effect that zinc has on the properties of CIS NCs was studied by incorporating zinc during the first step of the synthesis. Different In:Cu:Zn ratios were employed in this study, maintaining a constant 4:1 …

Study Of Thick Indium Gallium Nitride Graded Structures For Future Solar Cell Applications, Manal Abdullah Aldawsari

Graduate Theses and Dissertations

Indium gallium nitride (InxGa1-xN) materials have held great potential for the optoelectronic industry due to their electrical and optical properties. The tunable band gap that can span the solar spectrum was one of the most significant features that attracted researchers’ attention. The band gap can be varied continuously from 0.77 eV for InN to 3.42 eV for GaN, covering the solar spectrum from near infrared to near ultraviolet. Additionally, it has a high absorption coefficient on the order of ∼105 cm−1, a direct band gap, high radiation resistance, thermal stability, and so on. Nevertheless, the epitaxial growth of high quality …

Automated Flight Controller Adaptive Compensation For Actuator Failures In Transport Type Aircraft, Daniel James Fresella

Graduate Theses and Dissertations

Aircraft operate over a wide range of conditions including atmospheric, weight, and center ofgravity changes. This presents a substantial challenge to automatic control system designers. When these operating conditions are merged with a partial or full control surface failure, automatic flight control is near impossible with conventional controllers. Additionally, when pilots experience control failure emergencies during flight, workload and fatigue increase drastically. The continued research of automatic flight control systems that can seamlessly adapt to unmodelled failures will enable a new generation of robust aircraft control. In this paper a 9th order 6 degree of freedom aircraft model is used …

Design, Extraction, And Optimization Tool Flows And Methodologies For Homogeneous And Heterogeneous Multi-Chip 2.5d Systems, Md Arafat Kabir

Graduate Theses and Dissertations

Chip and packaging industries are making significant progress in 2.5D design as a result of increasing popularity of their application. In advanced high-density 2.5D packages, package redistribution layers become similar to chip Back-End-of-Line routing layers, and the gap between them scales down with pin density improvement. Chiplet-package interactions become significant and severely affect system performance and reliability. Moreover, 2.5D integration offers opportunities to apply novel design techniques. The traditional die-by-die design approach neither carefully considers these interactions nor fully exploits the cross-boundary design opportunities.

This thesis presents chiplet-package cross-boundary design, extraction, analysis, and optimization tool flows and methodologies for high-density …

Growth Of Pseudomorphic Gesn At Low Pressure With Sn Composition Of 16.7%, Joshua Grant, Grey Abernathy, Oluwatobi Olorunsola, Solomon Opeyemi Ojo, Sylvester Amoah, Emmanuel Wangila, Samir K. Saha, Abbas Sabbar, Wei Du, Murtadha Alher, Bao-Hua Li, Shui-Qing Yu

Physics Faculty Publications and Presentations

Group-IV alloy GeSn holds great promise for the high-performance optoelectronic devices that can be monolithically integrated on Si for near- and mid-infrared applications. Growth of GeSn using chemical vapor deposition technique with various Sn and Ge precursors has been investigated worldwide. To achieve relatively high Sn incorporation, the use of higher pressure and/or higher order Ge hydrides precursors were reported. In this work, we successfully demonstrated the growth of high-quality GeSn with Sn composition of 16.7% at low pressure of 12 Torr. The alloy was grown using the commercially available GeH₄ and SnCl₄ precursors via a chemical vapor …

Impact Of Long-Term Annealing On Photoluminescence From Ge1-XSnX Alloys, Oluwatobi Olorunsola, Hryhorii Stanchu, Solomon Opeyemi Ojo, Krishna Pandey, Abdulla Said, Joe Margetis, John Tolle, Adrian V. Kuchuk, Yuriy I. Mazur, Gregory J. Salamo, Shui-Qing Yu

Electrical Engineering Faculty Publications and Presentations

We report on the connection between strain, composition, defect density and the photoluminescence observed before and after annealing at 300 °C for GeSn samples with Sn content of 8% to 10%. Results show how the composition and level of strain influenced the separation between the indirect and direct optical transitions, while changes in the level of strain also influenced the density of misfit dislocations and surface roughness. The effect of annealing is observed to lower the level of strain, decreasing the energy separation between the indirect and direct optical transitions, while also simultaneously increasing the density of misfit/threading dislocations and …

Computational Frameworks For Multi-Robot Cooperative 3d Printing And Planning, Laxmi Prasad Poudel

Graduate Theses and Dissertations

This dissertation proposes a novel cooperative 3D printing (C3DP) approach for multi-robot additive manufacturing (AM) and presents scheduling and planning strategies that enable multi-robot cooperation in the manufacturing environment. C3DP is the first step towards achieving the overarching goal of swarm manufacturing (SM). SM is a paradigm for distributed manufacturing that envisions networks of micro-factories, each of which employs thousands of mobile robots that can manufacture different products on demand. SM breaks down the complicated supply chain used to deliver a product from a large production facility from one part of the world to another. Instead, it establishes a network …