Electrical and Computer Engineering Commons^™

The Importance Of The Analog-To-Digital Converter In The Measurement System, Aliev Ravshan, Anvar Djalilov

Chemical Technology, Control and Management

At the moment, many scientific researches are being conducted all over the world on the economical use of water and energy resources. Most of the scientific research works are aimed at improving measurement techniques and technologies, that is, increasing their accuracy. With this in mind, a high-precision analog-to-digital converter due to its unique metrological and technical characteristics was studied in this research paper. As a result of the study, it became clear that the use of a small-sized, high-precision sigma-delta analog-to-digital converter in modern measuring technology has a positive effect on its accurate and efficient operation.

Algorithms For Making Control Systems Based On Neural Network Technology To Automate Dynamic Plants, Jasur Sevinov, Abdishukurov Maqsudovich Shavkat

Chemical Technology, Control and Management

This paper examines the stages of multilayer neural network technology for the control and identification of dynamic systems. It is seen many ways to use multilayer neural networks in control systems. Neural controllers are based on several models and algorithms. Examples of such algorithms include the predictive model-based control algorithm, the Narma-L2 control algorithm, and the benchmark model-based control algorithm. These controllers illustrate various general ways to use multilayer neural networks in control systems. Common, standard linear control architectures have been proposed for many neural controllers.

Development Of An Ann-Based Predictive Model For The Efficient Treatment Of Industrial Wastewater, Alisher Khudoyberdi Ugli Rakhimov, Hasan Siddiq Ugli Murodov, Farrukh Bakhtiyorovich Igitov, Shuhrat Ahmadjonovich Mutalov, Jaloliddin Abdurazzakovich Eshbobaev

Chemical Technology, Control and Management

The effective removal of free chlorine ions from industrial wastewater is critical to ensure process safety, minimize equipment corrosion, and protect aquatic environments. In this study, a laboratory-scale activated carbon filtration system was developed and tested to treat chlorine-contaminated water collected from sludge collectors at industrial facilities. A total of 200 experimental trials were conducted under varied operational conditions, including changes in flow rate, initial chlorine concentration, pressure, pH, temperature, and activated carbon dosage. The resulting dataset was used to train a predictive model based on a feedforward backpropagation artificial neural network (ANN) implemented in MATLAB. The ANN model demonstrated …

Algorithms For Feature Extraction And Optimisation Of Object Recognition Operator, Hudayberdiev Xakkulmirzayevich Mirzaakbar, Bobomurod Mamitjonovich Tojiboev, Feruza Komiljonovna Samadova

Chemical Technology, Control and Management

This paper deals with the development and analysis of feature extraction and optimisation algorithms for object recognition operators. Different algorithms are used to improve the efficiency of recognition operators in the automatic analysis of remote sensing images. The information model of objects and methods for selecting, extracting and optimising their features have been studied. The issue of extracting important features of objects using spectral, textural and statistical features and constructing optimal operators based on them has also been studied. Effective approaches based on the theory of convex hulls and multidimensional analysis methods have been proposed, taking into account the mutual …

Determination Of Optimal Parameters For Quality Drying Of Garlic Using The Vibro-Convective Method, Jasur Safarov, Shakhnoza Sultanova, Abdurakhmon Mirkomilov

Chemical Technology, Control and Management

This article examines the process of drying garlic using a low-temperature vibratory-convective drying system. At the "Service Technology" department of Tashkent State Technical University, a vibratory dryer was developed to ensure high-quality drying of garlic while maximizing the preservation of its biologically active compounds. Through experimental studies, optimal drying parameters were determined, including the degree of moisture removal, process duration, airflow velocity, and vibration acceleration. The results obtained contribute to enhancing the efficiency and quality of garlic drying, which holds practical significance for agricultural producers and consumers interested in healthy nutrition.

Artificial Intelligence Applications For Grid-Connected Solar Inverters, Utkirjon Ubaydullaev, Sarvinoz Mirzaeva, Hasan Mustafoev

Chemical Technology, Control and Management

The increasing global demand for renewable energy has highlighted the importance of grid-connected solar inverters in ensuring efficient and stable power conversion. However, challenges such as fluctuations in solar energy generation, grid disturbances, and power quality issues necessitate advanced control strategies. The integration of artificial intelligence (AI) into solar inverters presents a transformative solution, enhancing performance, adaptability, and reliability in real-world applications.

This review explores the role of AI techniques, including machine learning (ML), deep learning (DL), fuzzy logic, and reinforcement learning (RL), in optimizing key inverter functionalities such as maximum power point tracking (MPPT), fault detection, power quality enhancement, …

Detection Of Http Flood Attacks Based On Machine Learning Algorithms, Norbek Karimov, Furkat Rakhmatov, Oybek Xolmuminov

Chemical Technology, Control and Management

This paper analyzes the effectiveness of Random Forest and SVM models for detecting HTTP Flood attacks. Experimental results demonstrate that both models achieve high accuracy. Evaluation was conducted using Precision, Recall, and F1 Score metrics. Additionally, key features of network traffic were extracted through correlation analysis to enable real-time application of the models in attack detection. The findings provide important insights into detecting DDoS attacks using machine learning and improving model performance.

Security In Biometric Access Control Systems Based On Fingerprints, Elmurad Jamuradovich Qilichev, Baxodir Saydullaevich Achilov, Ismoil Ergash OʻGʻLi Isroilov, Mirshod Mirkomil O'G'Li Ahmadov

Chemical Technology, Control and Management

This article analyzes biometric access control systems using fingerprints. The article considers the advantages of using biometric technologies, including solutions aimed at ensuring security, protecting users' personal data, and increasing the efficiency of systems. A detailed explanation of the principles of operation of fingerprint biometric systems, their underlying algorithms, and technological advances is provided. Problems that arise when assessing the level of security, ease of use, and technological and social aspects of biometric access systems and methods for combating them are also covered. At the end of the article, opinions are expressed about the future of fingerprint-based biometric systems and …

Studying The Technology For Obtaining Zinc Chloride From Spent Supporter Waste In Ammonia Production, A.T. Dadaxo‘Jaev, Sodikjon Kadirov

Chemical Technology, Control and Management

This article presents the results of research on the recycling of spent zinc adsorbents formed during the ammonia production process, aimed at obtaining zinc chloride (ZnCl₂), which can be utilized in various industrial sectors, including electroplating. The research covers the optimization of technological parameters such as hydrochloric acid concentration, temperature, and reaction time to efficiently extract zinc chloride. The experiments revealed that the best results are achieved by using a 20% hydrochloric acid solution, at a temperature of 60°C, with a reaction time of 60 minutes. The resulting 40% zinc chloride solution was tested in electroplating production, where it met …

Research Of The Dynamic Characteristics Of A Time-Pulse Ultrasonic Sensor, Aliev Ravshan, A.U. Djalilov

Chemical Technology, Control and Management

This article investigates the dynamic characteristics of a time-pulsed ultrasonic sensor used to measure water flow in open channels. The operating principle of the sensor, its response time in various hydrodynamic conditions, speed, and factors affecting measurement accuracy are analyzed. In the process of research, the improved ultrasonic sensor was tested and its effectiveness in measuring water flow in real time was evaluated. The results obtained showed that the sensor adapts to the velocity, temperature and turbulence level of the water flow. Based on the results of the research, the possibilities of working of time-impulse ultrasound sensors in open channels …

Static Characteristics Of An Electromagnetic Three-Phase Reactive Power Sensor For Converting Asymmetric Currents, Timur Urunbayevich Kurbaniyazov

Chemical Technology, Control and Management

This article discusses the processes in the elements and structures of three-phase electromagnetic current sensors used in measuring and controlling three-phase asymmetric reactive power in power supply systems, research models of quantities and parameters, physical mechanisms, and mathematical formulas based on graphical models.

Application Of Quantum Algorithms In Optimization Of Cognitive Decision-Making Systems, Noilakhon Yakubova

Chemical Technology, Control and Management

The article analyzes the potential of quantum algorithms for optimizing cognitive decision-making systems in production processes in the energy sector. Compared with traditional algorithms, quantum algorithms allow high-speed processing of large amounts of variable data in real time and solving multiparameter problems based on an integrated approach. The study considers uncertainties and issues of increasing efficiency in the processes of production and distribution of electricity using a cognitive model. The integration of quantum algorithms into this model allows developing optimal strategies for using resources in production. A heating boiler was taken as a control object, and taking into account its …

Algorithms For Fast Fire Risk Prediction And Real-Time Data Processing, Mirzoyan Mirzaaxmedovich Kamilov, Tolaniddin Ramziddinovich Nurmukhamedov, Oybek Zokirovich Koraboshev, Bakhodir Saydullayevich Achilov

Chemical Technology, Control and Management

Ensuring fire safety in facilities with high fire risk is one of the pressing problems of modern society. Nowadays, there is a great need for accurate and effective prediction systems for fire prevention and rapid response. Since traditional methods do not provide the ability to quickly analyze and predict in real time, the development of algorithms and modern approaches using modern technologies is of great importance. This article analyzes fire risk prediction algorithms, their principles of operation and effectiveness, and considers methods for assessing and predicting fire risk using Artificial Intelligence (AI), Machine Learning (ML), and Big Data technologies. The …

Practical Experiments Conducted On Determining The Air Velocity At The Inlet And Outlet Of The Intensive Separator And Processing Of The Obtained Results, Ilxom Zapirovich Abbazov, Kudrat Sherzadovich Khodjayev, Bobir Nabijon Ugli Sharopov, Rashid Kaldybaev

Technical science and innovation

In the primary processing of cotton raw materials, the means of storing cotton, transporting it from the gins to the departments, and transferring the product between departments are pneumatic conveying devices. Separators are devices for separating cotton from the air and cotton mixture in such pneumatic conveying devices. Separators are used in two types of conditions, namely, in a mobile or stationary state. The device for separating cotton from air consists of three main working parts: they are the parts for feeding cotton into the working chamber, separating it from the air flow, and removing cotton and air. These parts, …

Development And Analysis Of The Kinematic-Dynamic Model Of The Rehabilitation Exoskeleton System, Umidjon Abdumutalipovich Takabaev, Zafar Botirovich Juraev

Technical science and innovation

Designing modern rehabilitation exoskeleton systems requires a comprehensive study of human-machine interactions. In this process, creating kinematic and dynamic mathematical models of the system is extremely important. In this paper, we develop mathematical models that describe rehabilitation exoskeleton systems' kinematic and dynamic properties. Based on the Denavit-Hartenberg method we construct kinematic model of the exoskeleton system. The method gave us to determine the coordinate system for each joint. Furthermore, we also study the motion range of joints of the exoskeleton. Modeling the dynamic properties of the system performed with the second-order Lagrange equation. The exoskeleton construction consisting of knee, thigh, …

Installation Of Self-Controlled Floating Bars At Water Intake Pipelines Of Pumping Stations, Oleg Yakovlevich Glovatsky, Rustam Khujakulov, Fakhriddin Jaylovovich Nasirov, Ilhom Islamov, Jorabek Abdurahman Uralov, Shakhboz Amirov

Technical science and innovation

In modern conditions, to maintain a favorable hydraulic regime on mechanical water lifting systems, it is rational to use protective structures on watercourses that use the energy of the water flow in the form of a floating tank. Based on the obtained theoretical principles, fundamentally new self-controlled floating structures were created and the hydrodynamic characteristics of the movement of an unsteady three-dimensional flow for the parameters of the wing profile were refined. The theory of unsteady three-dimensional movement of a multiphase flow with its artificial stratification and protection from selected phases in depth is used by floating guide systems at …

Adaptive Control System Of Nonlinear Dynamic Object On The Basis Of Neuro-Fuzzy Networks, Isomiddin Xakimovich Siddikov, Dilnoza Maxamadjanovna Umurzakova

Technical science and innovation

The presented paper is devoted to the development of an adaptive control system for a nonlinear dynamic object using neuro-fuzzy networks. The authors note that in real conditions dynamic objects function under conditions of uncertainty, which are characterised by complex and poorly understood relationships between technological variables, the presence of perturbing and random disturbances, as well as nonlinear elements. This makes it difficult to apply traditional linear adaptive control algorithms. The use of self-organising adaptive control is proposed, in which the mathematical model of the controlled system is formed by operational identification during system operation. It is shown that linear …

Development Of Analytical Dependencies For Determining Kinematic Parameters Of The Drive Of The Working Engine Of The Mixing Machine, N. A. Maksudova

Technical science and innovation

The requirement of any technological process of product preparation is intensive mixing. This ensures uniform distribution of components. At the initial stage of designing planetary mechanisms, special attention is paid to determining the kinematic parameters. The dimensions, weight and design of the mechanism depend on the value of these parameters. The main criterion for assessing the scheme of the planetary mechanism is the kinematic parameters of the gear wheels of the mechanism. The article presents a kinematic scheme of the planetary mechanism of the kneading machine. The principle of rotation of the gear wheels of the planetary mechanism of the …

Investigation Of Dynamic Characteristics Of New Magneto-Elastic Transducers Of Mechanical Quantities, Sulton Amirov, Kamila Jurayeva

Chemical Technology, Control and Management

In the article examines the dynamic characteristics of new magnetically elastic converters of mechanical quantities by the method of parametric structural circuits. It is shown that the developed differential transformer magneto–elastic converters of power parameters in automatic monitoring and control systems act as a real differentiating link without statics, and magneto-elastic converters of motion parameters act as a whole in the form of sequentially connected oscillatory and real differentiating links. It has been established that the duration of the transient process in magnetoelastic converters of power parameters is determined by the parameters (magnetic capacitance and active magnetic resistance) of the …

Methodology Of Automated Control Of Situations In Structurally Complex Systems With Recycled Flows, Khusan Zokirovich Igamberdiev Academician, Madina Mirxalilovma Fozilova

Chemical Technology, Control and Management

This article discusses the methodology of automated management of situations in structurally complex systems with recycled flows. The need to develop a correct model for effectively controlling such systems based on scientific principles of analysis and decision-making is substantiated. Particular attention is paid to modeling, optimizing, and using digital technologies, including artificial intelligence, to improve the accuracy and efficiency of management decisions. The principles of decomposition, multi-criteria optimization, and linguistic models of fuzzy correspondence are described, which can be used in conditions of uncertainty and complexity of industrial facilities.

Joint Estimation Of The State And Parameters Of Dynamic Control Objects Based On The Maine Estimator, Yulduz Abdurakhmanova

Chemical Technology, Control and Management

The issues of constructing an adaptive joint estimation of the state and parameters of dynamic control objects using the Maine estimator are considered. There are various variants of the extended filter, and a variant based on iterations between parameter and state estimates was used in the work. In this version of the extended Kalman filter, the problem of joint parameter and state estimation is solved in such a way that parameter estimation is performed before state estimation. Then, the parameter values are used to assess the state. In this case, further iterations between the state vector estimation and the parameter …

Determination Of Chemical And X-Ray Phase Analysis Of Carbon-Containing Material, Sh.T. Juraev, B.F. Muxiddinov, U.T. Tailakov

Chemical Technology, Control and Management

This paper presents a chemical and X-ray diffraction study of the solid fraction obtained from the thermal-oxidative pyrolysis of waste tires. The study covers the analysis of the composition of rubber products before and after pyrolysis at a temperature of 750-850 °C. A chemical analysis of the gaseous, liquid and solid phases of pyrolysis products was also carried out. The ignition temperatures of gaseous products, their percentage content, as well as the optimal boiling temperatures of the resulting condensates were determined. X-ray analysis showed that the solid carbon residue consists of calcite (7.50%), amorphous carbon (87.24%), ankerite (Ca(Mg, Fe)[CO_{3 …}

Dеvеlоpmеnt Аnd Simulаtiоn Оf Аutоmаtiс Tеmpеrаturе Соntrоl Sуstеms Fоr Sоlаr Drуеrs, Sarvar Rejabov, Botir Shukurillayevich Usmonov, Komil Usmanov

Chemical Technology, Control and Management

Thе utilizаtiоn оf sоlаr еnеrgу in thе drуing оf аgriсulturаl prоduсts is соnsidеrеd signifiсаnt duе tо its еnеrgу еffiсiеnсу аnd еnvirоnmеntаl friеndlinеss. Hоwеvеr, trаditiоnаl drуing mеthоds fасе сhаllеngеs in mаintаining stаblе tеmpеrаturе аnd humiditу lеvеls, whiсh саn lеаd tо rеduсеd prоduсt quаlitу аnd dесrеаsеd prосеss еffiсiеnсу. Tо аddrеss thеsе issuеs, thе implеmеntаtiоn оf аutоmаtiс соntrоl sуstеms is еssеntiаl. In dеvеlоping аn аutоmаtiс tеmpеrаturе соntrоl sуstеm fоr sоlаr drуеrs, thе hеаt аnd mаss trаnsfеr prосеssеs wеrе prесisеlу mоdеlеd. Thе primаrу pаrаmеtеrs оf thе drуing prосеss, suсh аs prоduсt tеmpеrаturе аnd mоisturе соntеnt dуnаmiсs, wеrе еxprеssеd thrоugh mаthеmаtiсаl еquаtiоns. PID аnd Fuzzу …

Modeling Of Analog-To-Digital Converter In Signal Processing, Ravshan Aliev, A.U. Djalilov

Chemical Technology, Control and Management

This article is devoted to the study of the modeling process of analog-to-digital converters (ADCs) that process signals, one of the main parts of control system elements and devices. As we know, ADCs are an important part of modern control systems. During the research, the main stages of analog signal conversion were analyzed, i.e. discretization, quantization, coding. A classification of analog-to-digital conversion methods was made and the advantages and disadvantages of each were identified. Also, the characteristics and parameters of ADC were studied, their impact on ADCs performance was evaluated, and it was determined that certain characteristics should be taken …

Principles And Models Of Construction Of Linear Motion Actuators With Holonomic Structure For Intelligent Robot Movement, Matyokubov Nurbek Rustamovich, Temurbek Omonboevich Rakhimov, Yusupov Bekmurod Bayotovich

Chemical Technology, Control and Management

This article is devoted to the principles and models of building linear motion actuators with holonomic structure for the movement of intelligent robots. Also, the classification of the elements of the linear movement performance according to their interconnections and technical characteristics, taking into account their physical characteristics, was seen. A morphological matrix of the construction of holonomic structured linear motion performance elements based on the classification according to the considered technical specifications is presented. The given morphological matrix of linear motion actuators serves to develop new actuators for intelligent mechatronic and robotic systems. Based on the morphological matrix of the …

Application Of An Adaptive Neuro-Fuzzy Inference System To Control The Wastewater Treatment Process, Jaloliddin Abdurazzakovich Eshbobaev, Bakhodir Tajiddinovich Khamidov, Marcos Torices Fallanza

Chemical Technology, Control and Management

This study explores the application of an Adaptive Neuro-Fuzzy Inference System (ANFIS) for controlling wastewater treatment processes using ion-exchange resins. It addresses the critical challenges of water scarcity and pollution by enhancing the regulation of water hardness (H) and Total Dissolved Solids (TDS). Using a pilot laboratory device and experimental data from the mixed wastewater of the Kungrad Soda Plant in Uzbekistan, an ANFIS model was developed in MATLAB to automate process control. The model leverages water hardness and TDS as input parameters to regulate the water flow rate by servo valve opening degree, ensuring precise and efficient treatment. Compared …

Application Of Satellite Interferometry To Tailings Damages To Determine Their Stability, Mukhlisa Khasanovna Rakhimova

Technical science and innovation

In our country and abroad, the construction of special alluvial hydraulic structures - tailings storage facilities - is being carried out on a large scale for storing waste from the mineral enrichment process, the operation of which requires ensuring and observing strict technological control, failure of which leads to serious accidents and even disasters. Tailings dams play a critical role in the mining and metallurgy industry by providing safe storage of production waste. However, their stability and safety are a constant concern. Satellite interferometry (InSAR) is an innovative technology that can effectively monitor deformations and changes in the condition of …

Mathematical Model Of Control Of A Pumping Unit Used In The Technological Process Of Wastewater Treatment, Nodira Batirdjanovna Alimova Dsc, Professor, Aziza Ruzimamamovna Khaitova

Technical science and innovation

Strict environmental and health regulations, as well as the cost-effectiveness of wastewater treatment processes, have made control technology an important priority in the wastewater treatment industry. Control strategies operate on input variables (setpoint values) by choosing the values they should take to influence the evolution of state variables so that output variables (controllable variables) achieve desired values. The object is a pumping unit used in wastewater treatment technology, and its mathematical model is a set of structures reflecting the characteristics of the simulated processes. The main parameters in mathematical models are temperature and vibration level during pump operation, coordinates of …

Development Of The Principles Of Forming A Database For Geoinformation Mapping Of Tourism (As An Example Of Bostanlyk District Of Tashkent Region), Lola Xoji-Akbarovna Gulyamova, Risolat Raximjon Qizi Nizomova

Technical science and innovation

When creating tourist assessment maps for the purpose of tourist mapping, special attention is paid to determining the criteria for the formation of a database. To assess tourism opportunities in terms of natural conditions, ecology and socio-economic factors, data collection, their characteristics and requirements for them were studied. In order to improve the quality of sources of tourist assessment maps, parables of working with the internet and real-time removable data, creating a map based on social network data were considered. Proposals were made to create, manage and maintain a big data base. The ArcGIS program analyzed the possibilities of describing …

Joint Assessment Of Characteristics Of Object Parameters And Statistical Characteristics Of Disturbing Influences, Yulduz Mukhtarkhodzhaevna Abdurakhmanova

Technical science and innovation

The paper considers the problem of joint estimation of object parameters and statistical characteristics of random disturbances based on data from independent experiments. It is indicated that the use of the method of moments for the problem under consideration gives estimates that are not effective in the Rao-Kramer sense and the most common asymptotically effective estimation method, in this sense, is the maximum likelihood method(ML). However, in the case of objects with several disturbances that have distribution densities of a general form, the implementation of the ML method is difficult, since to find the values of the distribution density it …