Electrical and Computer Engineering Commons^™

Research Properties Of Solving Problems Of Parametric Optimization, Dilnoz Tulkunovna Muhamediyeva

Chemical Technology, Control and Management

A model of parametric optimization with fuzzy initial information is constructed. The conditions and areas of application of the main methods of the theory of fuzzy sets in studies of parametric optimization are determined. A connection is established between the stability of parametric optimization problems and fuzzy optimization problems. An algorithm for solving problems by the method of parametric programming is developed for fuzzy given initial information. The admissible region of the parametric programming problem and the value of its objective function at each point of this region depend on the parameter t. A description of the method for solving …

Development Of A Control Device And Algorithm For Autonomous-Moving Systems, Farhod Qosimov, Ru Jiang, Dong Zhang, Mirkhalil Ismailov

Chemical Technology, Control and Management

The article is devoted to improving the control and algorithm for Autonomous moving systems. The function of the controller is to provide communication between the control computer and the actuator. The ATmega2560 microcontroller is selected as the main processor. The electrical diagram of additional devices of the microcontroller is formed. Printed circuit boards consisting of separate blocks are made on the basis of the electrical circuit. To exchange information with external systems and process the received data, a special algorithm for the microcontroller has been created. The microcontroller is programmed based on this algorithm. The analysis of the functioning of …

Extraction Of Chitosan From Died Honey Bee Apis Mellifera, Gulnora Akmalovna Ixtiyarova, Dilshoda Azamovna Hazratova, Bobur Nosir O’G’Li Umarov, Oksana Muratbayevna Seytnazarova

Chemical Technology, Control and Management

This article presents the results of obtaining biopolymers of chitin and chitosan from a new promising source- died honey bee apis mellifera. To obtain chitin, at the first stage, the protein (deproteination) and mineral (demineralization) constituents of subpestilence, i.e. put them in soluble state and removed. Demineralization was carried out with 2 M hudrochloric acid for 5 hours at room temperature. The process of deproteination is carried out by processing the crushed raw materials with 1 N sodium hudroxide solution for 1 hour at a temperature of 80⁰С. Each process was accompanied by washing the raw materials to …

Mathematical Modeling Of Thermal Processes Of Traction Asynchronous Engines For Diagnosis And Control Of Their Technical Condition, Nilufar Rabbanaqulovna Avezova, Javharbek Sulton Ugli Fayzullayev

Chemical Technology, Control and Management

Mathematical models of thermal processes of traction asynchronous motors are developed. A traction asynchronous motor is considered as a thermal system consisting of three bodies (stator winding, stator magnetic core and rotor), which take into account the heat exchange not only between the corresponding bodies, but also the heat exchange between each body and the environment. It is shown that the steady excess of the stator winding temperature of a traction asynchronous motor depends on the multiplicity of the stator winding current, the coefficient of electrical energy loss, and also on the temperature coefficient of the resistance of the winding …

Application The Basic Concepts And Laws Of Methamatics In The Field Of Modern Technology, N.N. Khudoyberdiyev, N.R. Tolipova

Technical science and innovation

This article we will discuss the mathematical formula and basic terms specific to engineering practitioners. Mathematics can solve a given problem quickly and easily in the form of a definition, even if it is used as an integral or matrix. In this article, it can be tried to apply the advanced portion of the mathematics matrix to the generation of electricity, i.e.by adding various additions and notes to the given circuit diagram, we can identify the current matrix.Several physical bodies, such as conical cushioning objects, were used to calculate the kinetic energy produced by rotating axes and to provide precise …

Structurization And Modelling Of Technical Devices Of Hazardous Production Facilities, A.A. Kadirov, A.A. Kadirova, R.G. Abdeev

Technical science and innovation

Every year, the problem of industrial safety is becoming increasingly relevant. The effective industrial safety management system (ISMS) organization becomes especially important for nuclear energy, chemical, petrochemical, oil and gas, mining, metallurgical industries, coal mines and other industries, including enterprises with hazardous production facilities (HPF). Any violation of operating modes, unaccounted technological and operational defects can lead to serious consequences and accidents, accompanied by significant material costs and technological disasters. An important place among the problems of industrial safety is the problem of trouble-free operation of technical devices (units, machines and mechanisms, technical systems and complexes, technological equipment, instruments and …

Problems Of Coexistence Of Superconductivity And Magnetic Ordering Of Copper Sublattices In Yba2cu3-Xfexo7-X Ceramics, M.A. Ruzieva, Q.Kh. Bobomurodov, S.Q. Bobomurodov, R.A. Shokirov

Technical science and innovation

The article studies the problems of coexistence of superconductivity and magnetic ordering of copper sublattices in YBa₂Cu_3-xFe_xO_7-x ceramics.

It is known that in superconducting ceramics YBa₂Cu₃O_7-z with orthorhombic lattice as the oxygen content decreases, the transition temperature in superconducting state T_c decreases, and at z>0.6 superconductivity disappears, the lattice becomes tetragonal and at the same time, antiferromagnetic ordering of sublattices Cu (2) appears. The substitution in ceramics of YBa₂Cu₃O₇ part of copper atoms by iron atoms (i.e., the formation of a …

Precise Measuring Cells For Quantitative And Qualitative Measurement, A.A. Begunov, B.M. Akhmedov, R.A. Ibragimov

Chemical Technology, Control and Management

The main provisions considered in assessing the accuracy of methods and measurement results are considered. It is shown that in the experimental assessment of various accuracy indicators, and also when analyzing the content of components in various gaseous media, the sorption-gravimetric measurement method is widely used, methods for measuring the mass of the sorbent and possible sources of error of this technique. Methods of measuring the mass of gas using specific surface areas, including taking into account the contact of gas with a solid material, and also, the amount of adsorbed gas and its pressure, temperature, type and size of …

Controlling And Forecasting The Reliability Of Integrated Circuits Of Radio Systems Transmitting Information, Abdulaziz M. Nazarov Prof, Dilmurod A. Davronbekov Prof.

Chemical Technology, Control and Management

The issues of forecasting the reliability of integrated circuits, which are the main element base of modern radio engineering information transmission systems, are considered. Methods of parametric and functional control are described to determine the correspondence of the static and dynamic parameters of microcircuits to the required values. A combined method for determining the operating parameters of microcircuits is also described. The advantage of this method in addition to the two above methods is indicated that it combines the function of controlling the operation of the entire control system. Two approaches for predicting reliability are given, as well as mathematical …

Features Of Hydration Process, Structure Formation And Curing Processes Of Mono And Polymineral Cement In The Presence Of Additives Of Solid Waste Of Soda Production, Nargis Shamadinova, Gulnora Abdukadirovna Tokhtakhunova Phd, Temur Azimovich Atakuziev, Shakhnoza Saidanvarovna Rakhimjanova

Chemical Technology, Control and Management

The influence of the additive of solid waste of soda production (SWSP) on the content of -C₂S and C₃S in cement studied. It was found that SWSP affects the density of the aluminum-containing minerals C₃A and C₄AF, in addition, in the presence of gypsum, their plasticizing properties improved. The introduction of SWSP additives during grinding of clinker intensifies the grinding process and made it possible to obtain a more plastic cement. It was proved that SWSP with CaCl₂ content can be used as an additive to concrete and cement mortars - …

Investigating The Solution Properties Of Population Model Of Cross-Diffusion Model With Double Nonlinearity And With Variable Density, Dildora Kabilovna Muhamediyeva

Chemical Technology, Control and Management

The models of two competing populations with double nonlinear diffusion and three types of functional dependencies are considered. The first dependence corresponds to the Malthusian type, the second to the Verhühlst type (logistic population), and the third to Olli-type populations. A common element of this kind of description is the presence of a linear source. Nonlinear sinks are also present in descriptions of populations of the Verhulst and Ollie type. Suitable initial approximations for a rapidly converging iterative process are proposed. Based on a self-similar analysis and comparison of the solutions of the Cauchy problem in the domain for an …

Techniques To Solve Decision-Making Problems, Dilnoz Tulkunovna Muhamediyeva, Bekmuratov Fayzievich Tulkun

Chemical Technology, Control and Management

Solving decision-making problems in poorly formalized systems only with the help of deterministic and probabilistic methods is insufficient. To do this, it is necessary to widely apply the methods of hybrid intelligent systems and, especially, the methods of “soft” calculations (SoftCalculation, SoftComputing) and the directions of ComputationalIntelligence — intelligent computing technologies that are emerging on this theoretical and methodological base. An immune - fuzzy algorithm for the synthesis of fuzzy inference systems (FIS) is proposed. A two-stage adaptive FIS synthesis algorithm is described. At the first stage, the initial fuzzy parameters are clustered in order to reduce the number of …

Neuro-Fuzzy Modeling For Predictive Control Systems With Complex Technological Processes And Production, Yusupbekov Nodirbek, Shukhrat Gulyamov, Malika Doshchanova

Chemical Technology, Control and Management

The paper implements a modification of a fuzzy neural network, which is suitable for predictive control purposes. Adaptation of a multidimensional programmable controller based on a neural algorithm for the back propagation of forecasting errors is proposed, as well as neural parametric identification of a fuzzy mathematical model of complex technological processes and production based on experimental data and expert estimates.

Steady Algorithms For Synthesis Of Multidimensional Controlling Systems With Incomplete Information About The Object State, Uktam Farkhodovich Mamirov

Chemical Technology, Control and Management

In this paper, questions of forming and creation of steady synthesis algorithms of multidimensional controlling systems at incomplete information on object status are considered. It is shown that the matrix of feedback coupling on a status at the complete information is not determined. The different algorithms of steady calculation of a matrix pseudo-inverse to the matrix of outputs using these or those decomposition of matrixes are analyzed. Algorithms of iterative specification of a required solution of "skeletal" decomposition are given. The given expressions allow synthesizing the simplified computing procedures of synthesis of multidimensional controlling systems at incomplete information on object …

Importance Of Morphological Features In Orthoptera Identification, Kamilov Mirzoyan, Alisher Khamroev, Hudayberdiev Mirzaakbar

Chemical Technology, Control and Management

This article analyzes the problems of implementing image recognition methods and algorithms for identifying biological objects. The Orthoptera group was chosen as a biological object. Orthoptera is a taxonomic order of insects that includes grasshoppers, crickets, locusts, and others. Approaches to the formation and identification of features of Orthoptera species and the formation of training and control samples of their samples are proposed. Estimation algorithms (ACE) were chosen as algorithmic support for identifying Orthoptera collections. ACE is based on the principle of partial priority. Approaches to the formation of a training and testing complex based on the data from the …