Electrical and Computer Engineering Commons^™

Methods And Algorithms For Monitoring And Prediction Of Various Fire Hazardous Situations, Mizaakbar Xakkulmirzayevich Hudayberdiyev, Oybek Zokirovich Koraboshev

Chemical Technology, Control and Management

This article analyzes emergency situations arising from natural disasters (fires, explosions, earthquakes, floods, landslides, etc.) and man-made accidents. The event in which the values of fire risks in the area decrease uniformly and at the same time the amount of fire risks is minimal is considered optimal. Models, methods, and logistic regression algorithm have been used to predict fire hazard situations and identify potential fire safety measures.

Remote Alignment Fixing Device With Vizir Marks In Base Lcd Indicator, Nodirbek Rustambekovich Yusupbekov, Zahidov Muratovich Nematjon

Chemical Technology, Control and Management

The article substantiates the needs to increase the level of automation of methods and geodetic support of geometric parameters during the construction of buildings and structures. In particular, the method of alignment measurements is considered. This is widely used in determining deviations from the straightness and alignment of the installation of elements in engineering building structures, including hydraulic structures, as well as in the control of process equipment installations, rolling mills, conveyor lines, crane tracks, when monitoring precipitation. and deformations of techno objects. One of the methods of alignment measurements with the use of a visual-optical device – aliniometer and …

The Magnetic Chain Mathematical Models Of A New Angular Displacement Converter With A Variable Active Area Of A Movable Core, Sultan Faizullayevich Аmirov, Ulugbek Shukhratovich Mamadaliyev, Islom Azim Ugli Karimov

Chemical Technology, Control and Management

The article develops mathematical models of the magnetic chain of new differential type angular displacement transformer converter with a variable active area of the movable core, in which the width of the movable ferromagnetic core is a function of the angular displacement of the converter. In this case, the magnetic chain of the converter, divided into three characteristic (before the mobile ferromagnetic core, ferromagnetic core and after the ferromagnetic core) sections, is considered as a magnetic chain with distributed parameters. It is established that when the magnetic resistance of the magnetic chain steel part is not taken into account, the …

Choice Of Instruments For Verification And Calibration Of Gas Analyzers, Ortigali Khakimov, Paraxat Mayliyevna Matyakubova, Mirolim Muhammad O'G'Li Maxmudjonov

Chemical Technology, Control and Management

This article analyzes the process of metrological control of gas analyzers and metrological requirements for them. The current state of the standards used in the state metrological control of gas analyzers and the results of the analyzes were studied. The task of choosing the measuring instruments used in the verification process and optimizing the requirements for them is set. An experimental verification process was organized in three groups using several measuring devices, and the reliability of the verification results was assessed. With the use of modern measuring instruments, a graph of the output value was built during the experimental verification …

Synthesis Methods And Algorithms For Expanding The Dynamic Range Of The Adc, Jumaev Odil Abdujalilovich, Rashidov G'Olibjon Xayriddinovich

Chemical Technology, Control and Management

The modern development of new technologies, in particular, the intensive use of programmable logic integrated circuits in digital information processing tasks, allows for algorithmically and programmatically solving problems, opens up real opportunities to increase accuracy and ensure the required signal conversion speed, and also, it will be possible to take into account the effects of noise and their elimination over the entire time interval band. The article discusses the main methods of digital information processing, analyzes the ways and possibilities of expanding the dynamic range of analog-to-digital converters, as well as the synthesis of appropriate conversion devices, primarily digital filters.

Mathematical Description Of A Bleach Impregnation Reservoir, Bekobod Ibragimov

Chemical Technology, Control and Management

This article discusses the issues of constructing a mathematical model of the technological process of bleaching textile materials in an impregnating reservoir using the heat balance equation, on the basis of which a qualitative analysis of the dynamic properties of an object has been carried out in order to create highly efficient control systems with the use of energy-saving technologies. While constructing a mathematical model characterizing the established and non-established modes of the control object (impregnating reservoir) used changes in heat flow and mass velocity of the incoming tissue. An algorithm for constructing a mathematical model of the process of …

Mathematical Description And Algorithm For Solving The Model Of The Ionite Regeneration Process In The Ion Exchange Method Of Water Softening, Djalolitdin Paxritdinovich Mukhitdinov, Nilufar Abdusami Qizi Yunusova

Chemical Technology, Control and Management

Based on the modern representation of the water softening process by the ion exchange method, modeling was carried out, an algorithm was developed and the ionite regeneration process was calculated in a water softening plant with a fixed ionite layer. To solve the system of equations of the model, special, but simple enough for use in engineering calculations, techniques and methods have been developed and applied. The constructed model and its solution algorithm can be used to predict the process of ionite regeneration in an ion exchange apparatus. It can also be used to calculate the time of the ionite …

Modeling And Adjustment Of A Fuzzy Controller In A Bioreactor Control System, Mahmudov Giyosjon Baqoyevich

Chemical Technology, Control and Management

The article describes the modeling and configuration of a fuzzy controller for the control system of the bacterial oxidation of hard-to-enrich gold-bearing sulfide ores. The simulated logical fuzzy controller allows you to save the consumption of refrigerant water consumed in the process by 4,3%, using it to control the process of bacterial oxidation.

Pole Placement Of Linear Multidimensional Systems Using Unlimited Rank Output Feedback, Jasur Usmonovich Sevinov, Okila Khusanovna Boeva

Chemical Technology, Control and Management

The problem of placing poles in linear multidimensional systems using a feedback matrix of unlimited rank is considered. The effect of output feedback of indefinite rank of the characteristic polynomial of a system with several variables is studied. The results are then used to obtain a recurrent pole placement algorithm without any restrictions on the rank of the output feedback matrix used. The algorithm is based on the pseudo-inverse concept of obtaining solutions to systems of linear equations using the least squares method and is computationally efficient.

Synchronization Of The Training Of Specialists In The Automation Of Technological Processes In Accordance With The Dynamics Of The Taxonomy Of Learning Goals, Yusuf Shodievich Avazov, Kamola Abdullaeva

Chemical Technology, Control and Management

Changes in the characteristics of modern ones, reflecting them as the "digital generation", inevitably necessitate electronic interactive, mobile and mixed, machine learning, especially in the field of automation and control of technological processes and production. As a consequence of reflecting these realities, there have been parallel changes in the taxonomy of learning objectives - from the classical to the revised rethought and digital.

In order to study the problem of synchronizing the training of future specialists in the field of automation and control of technological processes and production and funny knowledge in accordance with the dynamics of the taxonomy of …

Algorithmic Methods For Developing The Structure Of A Thyristor Electric Drive For Mining Machines, N.R Yusupbekov, O.A. Jumaev, S.S. Turaev

Chemical Technology, Control and Management

The article discusses the creation of algorithmic structures and the development of digital control systems for electric drives of mine-lifting machines, provides some concepts for creating digital control systems using thyristor converters. The analysis of the static volt-ampere characteristics of the thyristor is given, some calculations of the circuits and circuits of the thyristor converter (TP) corresponding to the different modes of operation of the TP are given, and also, based on the synthesis of the dynamic properties and characteristics of the thyristor, an algorithmic structure of the model of the thyristor converter is proposed.

Method For Solving The Kinematics Inverse Problem For Moving Along A Trajectory Objects (As An Example Of Assembly Industrial Robots), Oripjon Olimovich Zaripov, Dildora Usmonovna Sevinova

Chemical Technology, Control and Management

The task of performing a technological operation in kinematic calculation of industrial robots and determining various kinematic parameters describing the efficiency of robots is solved. Among them, one of the urgent problems based on the analysis of the entire kinematics of the assembly industrial robot is the problem of solving the inverse problem of the kinematics of the manipulator positions, that is, the problem of determining the relative parameters that change the coordinates of the gripper according to the given position. The article presents a scheme that allows solving the inverse kinematics problem of an industrial robot manipulator moving in …

Research Of Three-Phases Current’S Transducers Of Filter-Compensation Devices For Control Reactive Power’S Consumption Of Asynchronous Motor, Ilkhomjon Khakimovich Siddikov, Dilyorbek Karimjonov Doniyorbek O'G'Li -, Abdumutal Abdikarimovich Abdigapirov

Chemical Technology, Control and Management

In the article given materials of developing of three-phase electromagnetic current transducers of reactive power, using with asynchronous motor, methods connecting of two sensing element, series, parallel and differential and loops suitable for each phase, dynamic characteristics of output signals of three-phase electromagnetic current transducers asynchronous motor.

On the basis of modern calculation and design complexes are of great importance in the research variable sizes of three-phase current electromagnetic transducers of filter-compensation devices of reactive power of asynchronous motors. Presented mathematical model of research of electrical, electromagnetic and magnetic elements of electromagnetic current transducers in the …

Modeling Of The Process Of Measuring Conversion Of The Flow Of Liquid And Gaseous Media By The Method Of Variable Pressure Drop, Shukhrat Manapovich Gulyamov, Elbek Elmirza O'G'Li Ortiqov

Chemical Technology, Control and Management

On the basis of material and heat balances, taking into account the initial and boundary conditions, a mathematical model of the process of measuring the transformation of liquid and gaseous technological media by the method of variable pressure drop is constructed. The analysis of the results of studying the influence of non-stationary flows of a controlled medium on the uncertainty of the results of measuring the flow rate of liquids and gaseous mixtures with a changing hydrodynamic structure of the flow of a controlled medium is performed. A comparative analysis of the calculated and experimental transient processes in the measuring …

Virtual Potassium Chloride Analyzer In The System Of Advanced Control Of Potash Fertilizer Production Processes, Umidjon Ruziev, Jahongir Sherboyevich Bekqulov

Chemical Technology, Control and Management

It is proposed to include virtual instrumental quality analyzers of potash fertilizers in the composition of the advanced (advanced) management system. The structure of the virtual analyzer is substantiated using mathematical models of the technological process of drying potassium chloride in its composition. Based on the results of fuzzy clustering, the parameters of the modes of the technological process of drying potassium chloride are determined.

Model For Calculating The Static Characteristics Of Hydraulic Systems Of Hydro Technical Buildings, Mirkhalil Ismailov, Dong Zhang, Farkhod Kasimov

Chemical Technology, Control and Management

Hydraulic mechanisms that actuate flat gates, widely used in hydraulic structures, are studied as hydraulic actuators of the system. Their static mathematical models are developed using an integrated methodology with a hydraulic pump, inlet and suction pipes, and internal and external resistance factors. Unlike existing mathematical models, the model developed in this paper allows a detailed description of the characteristics of hydraulic drives due to the fact that pressure losses in the throttle, regulator, and power amplifier, as well as local resistances in hydraulic pipelines, are taken into account.

Analysis Of Vegetable Oil Refining Technology, Elyor Samadov

Chemical Technology, Control and Management

Innovative technologies for refining vegetable oils are presented, as well as the qualitative characteristics of raw vegetable oils obtained by extraction and mechanical methods. A general review of the chemical composition and impurities of vegetable oils resulting from the reaction between glycerol and fatty acids is carried out, and a brief review of the study to determine the effect of refining on biologically active components.

The analytical review is devoted to a comparative comparison of two types of refining - chemical and physical refining.

Influence Of Magnetomechanical Properties Of Ferromagnetic Materials On The Sensitivity Of A Magnetoelastic Sensor, Sulton Amirov, Kamila Komilovna Jurayeva

Chemical Technology, Control and Management

The requirements of high operational reliability are most fully met by automated monitoring and control systems, the elements of which are magnetoelastic sensors. Such sensors, due to their metrological characteristics, have found application in electrified railway transport, in the metallurgical, metalworking, mining and other industries. The principle of operation of such sensors is based on the fact that in the process of influencing the magnetic core of the sensor by force, there is a change in the magnetic permeability of the material, a change in the magnetic resistance of the circuit, a change in the mutual inductance coefficient of the …

Algorithms For Multi-Factory Polynomial Modeling Of Technological Processes, Farrukh Do'stmirzayevich Jo'rayev, Murodjon Ashurqulovich Ochilov

Chemical Technology, Control and Management

The article reveals the meaning and essence of the modeling method in the study of complex technological processes based on the problematic aspects of building multifactorial relationships and the principles for their elimination. In the case of non-linearity of multifactorial connections of a complex system, the expediency of approximating such functions by polynomials is substantiated. The authors' ideas about the increasing importance of interpolation methods in practice against the background of the possibility of simplification based on the use of modern mathematical hardware and software for integration into the process of modeling and optimizing technological processes due to the complexity …

Structural Model Of The Technological Process Of Storage And Processing Of Oil Raw Materials, N.A Kabulov

Chemical Technology, Control and Management

The technological method of storing and processing oilseed raw materials is structurally modelled in the article. Additionally, it is suggested that the generalized structure be presented as a three-part scheme, consisting of a raw material department, a processing shop, and transportation networks. On the basis of a thorough examination of the characteristics of the constituent parts of the technological complex, a practical model for the problem of the general characteristics of the technological complex is proposed.

Efficiency Of Using Solar Collectors In Energy Saving And Saving Energy Resources, R R. Tillahodjaev, A A. Mirzayev

Technical science and innovation

Most manufacturers, suppliers and installers make only a rough calculation of solar collectors. The article goes step-by-step calculation, solar systems for heating, in order to fully provide the house with warmth in winter. Calculation of the real power of the solar collector. Calculation of the efficiency of the solar collector in the direction. Calculation of solar collector performance by installation angle. Features of flat panels. The performance of the vacuum manifold. How many solar collectors do you need to heat your home? Hot water connection.

Intelligent Approach To Power System Management During Well Drilling In Terms Of Environmental Impact, N N. Makhmudov, K M. Sulitanofu

Technical science and innovation

An autonomous hybrid power system is an intelligent power installation that provides electricity to isolated consumers without being connected to the power grid. The introduction of autonomous hybrid power systems in the oil and gas industry is considered as an option to improve energy and environmental security. As a rule, oil and gas fields are located remotely and off the grid, and therefore electricity is generated using diesel generators. This article discusses the possibility of reducing emissions of pollutants into the atmosphere by using an autonomous hybrid installation as a source of electrical energy.

Evaluation Of Energy Efficiency Of Photoelectric Heat Batteries With Mechanism Of Solar Observation, M N. Tursunov, X Sabirov, I A. Yuldoshev, U R. Xolov

Technical science and innovation

Cooling of the rear surface of photoelectric batteries (PEB) was investigated by attaching a newly designed heat collector made of parallel channel cellular polycarbonate to the rear surface in order to improve the electrical and thermal efficiency in this research work. The experiment was conducted on June 7, 2022 at the Heliopolygon of the Physical-Technical Institute of Tashkent city (latitude: +41,34 (41°20'23"N), longitude: +69,3 (69°17'36"E). 2 340 W monocrystalline silicon PEBs(photoelectric batteries) were used as experimental devices. The rear surface of the first is equipped with a cooling …

Method Of Intelligent Control Of The Process Of Rectification Of Multicomponent Mixtures, N R. Yusupbekov, Y Sh Avazov

Technical science and innovation

An intelligent method of controlling a rectification column, which implements the technological process of separation of multicomponent mixtures by rectification method, is proposed. The advantage of the method is that it uses an advanced process control system (APC-system) and a distributed control system at the same time. The proposed intellectual method of controlling the process of rectification of multicomponent mixtures for the application of APC-systems and a net model of situational control allows to increase the quality of the product coming from the rectification column, and the efficiency of the rectification of the mixture column, to increase the quality of …

Justification For The Creation Of A Pumped Storage Power Plant On The Basis Of The Cascade Of The Urta-Chirchik Hpps, M M. Mukhammadiev, K S. Dzhuraev, E D. Ismailov

Technical science and innovation

The article deals with the creation of a pumped storage power plant. PSPP is the most efficient option for generating electricity in the conditions of Uzbekistan, especially at the Urta-Chirchik cascade. We have discovered a pumped storage power plant in Bustanlik region, Bulaksu-Khojikent PSPP, Kizilsui-Khojikent PSP, Charvak HPP-PSPP and Pskem PSPP, and were convinced that they would justify all the money spent. In the pumped storage power plant in Bustanlik region the necessary infrastructure is available in full, and the production base of the Tashkent region and Bostanlyk district of the Republic is subject to use, taking into account the …

Analysis Of Functionality Of Statistical Data In Geovisualization Of Population Dynamics, L Gulyamova, M Sh Shafkarova, D N. Rakhmonov

Technical science and innovation

The article deals with the analysis of population density with the help of geo information programs, the process of visualization of the integration of statistical and geographical data, the structure of the technological sequence. One of the methods for describing the relative productivity of land data is considered. Geo information systems can support the decision-making process in the design and selection phase with limited capabilities, and these systems provide a very static modeling environment. This limits their scope as a decision support tool, especially at stages where collaborative problem solving decisions are required.

Device Based On Spectral Analysis For Detection And Correction Of Speech Defects In Uzbek Speaking Children, Sh K. Nematov, Y M. Kamolova

Technical science and innovation

В статье рассматриваются возможности и необходимость использования прибора на основе спектрального анализа для выявления и коррекции дефектов речи у узбекоязычных детей. Прибор относится к медицинской технике и специальной педагогике, может быть использован в диагностических исследованиях и реабилитационных процессах, связанных с измерением правильности произношения после установки кохлеарных имплантов у (узбекоязычных) детей с тугоухостью, для улучшения слуха и коррекции речи в слухо- слабоумным детям, направленные на совершенствование правильного произношения. произношение, развитие слуха и речи. Технически визуализация звучащей речи в этом комплексе достигается за счет улавливания звуков микрофоном, преобразования их в дополнительном устройстве, передачи сигнала на процессор, и затем отображение компонентов звучащей речи …

Use Of Power-To-Gas Technology With An Excess Of Electricity In The Network, N A. Abdivakhidova

Technical science and innovation

Electricity-to-gas conversion is a key area of interest for decarbonizing and increasing the flexibility of energy systems, as it can both absorb renewable electricity during periods of excess supply and provide backup energy during periods of excess demand. By combining the power-to-gas conversion with the natural gas network, the inherent flexibility of the line package can be exploited and some of the power variability can be transferred to the gas network. Also, as long as the gas injected into the gas grid is low-carbon, such as hydrogen from renewables to gas, then the overall greenhouse gas emissions from the gas …

Uzbek Commands Recognition By Processing The Spectrogram Image, M M. Musayev, I Sh Khujayorov, M I. Abdullaeva, M M. Ochilov

Technical science and innovation

This paper describes the most common algorithms with image approach convolutional neural network and two-dimensional DCT with machine learning classification KNN, SVM and RF. These algorithms are evaluated for applicability to the Uzbek language and a comparative analysis on the accuracy and recognition rate. The command words of the Uzbek language were chosen for the experiments. According to the results, it was found that both methods give high rates of recognition accuracy and are 92% (CNN) and 90% (2DDCT+Zigzag+SVM). Also the combinations of 2D-DCT+Zigzag+ KNN and 2D-DCT+Zigzag+ RF with average recognition accuracy of 86% and 85%, respectively, were considered in …

Improving The Work Efficiency Of An Air Conditioning System Based On A Chiller, N Usmonov, A Khazratov, J Usmonov

Technical science and innovation

This article deals with evaporative cooling devices used in air conditioning systems. Various ways of lowering the air temperature to the dew point have been identified as a result of improvements to the devices considered. It is also indicated that the circulating water temperature in the system can be lowered to the air temperature on the wet bulb thermometer. As is known, recirculating water is often used as a cooling water in process units to reduce water consumption in industrial plants. Circulating water is heated by recirculation and the heated water is cooled in ventilated cooling towers. This method of …