Robotics Commons^™

Integrating Mathematics And Educational Robotics: Simple Motion Planning, Ronald I. Greenberg, George K. Thiruvathukal, Sara T. Greenberg

Computer Science: Faculty Publications and Other Works

This paper shows how students can be guided to integrate elementary mathematical analyses with motion planning for typical educational robots. Rather than using calculus as in comprehensive works on motion planning, we show students can achieve interesting results using just simple linear regression tools and trigonometric analyses. Experiments with one robotics platform show that use of these tools can lead to passable navigation through dead reckoning even if students have limited experience with use of sensors, programming, and mathematics.

A Framework For Test & Evaluation Of Autonomous Systems Along The Virtuality-Reality Spectrum, Nathan D. Gonda

Computational Modeling & Simulation Engineering Theses & Dissertations

Test & Evaluation of autonomous vehicles presents a challenge as the vehicles may have emergent behavior and it is frequently difficult to ascertain the reason for software decisions. Current Test & Evaluation approaches for autonomous systems place the vehicles in various operating scenarios to observe their behavior. However, this introduces dependencies between design and development lifecycle of the autonomous software and physical vehicle hardware. Simulation-based testing can alleviate the necessity to have physical hardware; however, it can be costly when transitioning the autonomous software to and from a simulation testing environment. The objective of this thesis is to develop a …

Robotic Motion Generation By Using Spatial-Temporal Patterns From Human Demonstrations, Yongqiang Huang

USF Tampa Graduate Theses and Dissertations

Robots excel in manufacturing facilities because the tasks are repetitive and do not change. However, when the tasks change, which happens in almost all tasks that humans perform daily, such as cutting, pouring, and grasping, etc., robots perform much worse. We aim at teaching robots to perform tasks that are subject to change using demonstrations collected from humans, a problem referred to as learning from demonstration (LfD).

LfD consists of two parts: the data of human demonstrations, and the algorithm that extracts knowledge from the data to perform the same motions. Similarly, this thesis is divided into two parts. The …

Force Feedback And Intelligent Workspace Selection For Legged Locomotion Over Uneven Terrain, John Rippetoe

USF Tampa Graduate Theses and Dissertations

Legged robots present an incredible opportunity for humanity to conduct dangerous operations such as search and rescue, disaster recovery, and planetary exploration without ever placing themselves in harms way. The ability of a leg to more freely dictate its shape, orientation, and length gives it tremendous mobility and adaptability demanded of a system intended for operation outside of a controlled environment. However, one only need look at the average cat, dog, or friendly neighborhood squirrel to understand the immense gap that exists between what is possible of legged systems and their current set of capabilities.

Areas of study relevant to …

Programming Of Collaborative Robot (Cobot) To Selectively Disassemble Products To Obtain Critical Materials, Brittany Felder

Research Opportunities for Engineering Undergraduates (ROEU) Program 2018-19

End-of-life products that contain critical materials, such as rare earth magnets, are often discarded even though there is remaining value that can be fed back into a remanufacturing process. This research aims to develop high throughput and economic value recovery from electric machines using collaborative robotics.

Improvement Of The Material’S Mechanical Characteristics Using Intelligent Real Time Control Interfaces In Hfc Hardening Process, Florentin Smarandache, Luige Vladareanu, Mihaiela Iliescu, Victor Vladareanu, Alexandru Gal, Octavian Melinte, Adrian Margean

Branch Mathematics and Statistics Faculty and Staff Publications

The paper presents Intelligent Control (IC) Interfaces for real time control of mechatronic systems applied to Hardening Process Control (HPC) in order to improvement of the material’s mechanical characteristics. Implementation of IC laws in the intelligent real time control interfaces depends on the particular circumstances of the models characteristics used and the exact definition of optimization problem. The results led to the development of the IC interfaces in real time through Particle Swarm Optimization (PSO) and neural networks (NN) using off- line the regression methods.

Exploring Cyber-Physical Systems, Misbah Uddin Mohammed

Graduate Research Theses & Dissertations

The advances in IOT, Computer Vision, AI and Machine Learning have made these technologies ubiquitous to our daily lives. From Smart Phones to Connected Vehicles, Cyber Physical systems have been interspersed into everything we interact in today’s world. The aim or this thesis was to explore these advances in Cyber Physical Systems and analyze the different sectors they were affecting. We then hand-picked certain domains and explored further by carrying out practical projects using some of the latest software and hardware resources available. Technologies like Amazon Alexa services, NVIDIA Jetson boards, TensorFlow, OpenCV, NodeJS were heavily employed in our various …

Volumetric Error Compensation For Industrial Robots And Machine Tools, Le Ma

Doctoral Dissertations

“A more efficient and increasingly popular volumetric error compensation method for machine tools is to compute compensation tables in axis space with tool tip volumetric measurements. However, machine tools have high-order geometric errors and some workspace is not reachable by measurement devices, the compensation method suffers a curve-fitting challenge, overfitting measurements in measured space and losing accuracy around and out of the measured space. Paper I presents a novel method that aims to uniformly interpolate and extrapolate the compensation tables throughout the entire workspace. By using a uniform constraint to bound the tool tip error slopes, an optimal model with …

Controlled Switching In Kalman Filtering And Iterative Learning Controls, He Li

Masters Theses

“Switching is not an uncommon phenomenon in practical systems and processes, for examples, power switches opening and closing, transmissions lifting from low gear to high gear, and air planes crossing different layers in air. Switching can be a disaster to a system since frequent switching between two asymptotically stable subsystems may result in unstable dynamics. On the contrary, switching can be a benefit to a system since controlled switching is sometimes imposed by the designers to achieve desired performance. This encourages the study of system dynamics and performance when undesired switching occurs or controlled switching is imposed. In this research, …

Effective Plant Discrimination Based On The Combination Of Local Binary Pattern Operators And Multiclass Support Vector Machine Methods, Vi N T Le, Beniamin Apopei, Kamal Alameh

Research outputs 2014 to 2021

Accurate crop and weed discrimination plays a critical role in addressing the challenges of weed management in agriculture. The use of herbicides is currently the most common approach to weed control. However, herbicide resistant plants have long been recognised as a major concern due to the excessive use of herbicides. Effective weed detection techniques can reduce the cost of weed management and improve crop quality and yield. A computationally efficient and robust plant classification algorithm is developed and applied to the classification of three crops: Brassica napus (canola), Zea mays (maize/corn), and radish. The developed algorithm is based on the …

Collaborative Robotic Path Planning For Industrial Spraying Operations On Complex Geometries, Steven Brown

Graduate Theses and Dissertations

Implementation of automated robotic solutions for complex tasks currently faces a few major hurdles. For instance, lack of effective sensing and task variability – especially in high-mix/low-volume processes – creates too much uncertainty to reliably hard-code a robotic work cell. Current collaborative frameworks generally focus on integrating the sensing required for a physically collaborative implementation. While this paradigm has proven effective for mitigating uncertainty by mixing human cognitive function and fine motor skills with robotic strength and repeatability, there are many instances where physical interaction is impractical but human reasoning and task knowledge is still needed. The proposed framework consists …

A Dexterous, Glove-Based Teleoperable Low-Power Soft Robotic Arm For Delicate Deep-Sea Biological Exploration, Brennan T. Phillips, Kaitlyn P. Becker, Shunichi Kurumaya, Kevin C. Galloway, Griffin Whittredge, Daniel M. Vogt, Clark B. Teeple, Michelle H. Rosen, Vincent A. Pieribone, David F. Gruber, Robert J. Wood

Publications and Research

Modern marine biologists seeking to study or interact with deep-sea organisms are confronted with few options beyond industrial robotic arms, claws, and suction samplers. This limits biological interactions to a subset of “rugged” and mostly immotile fauna. As the deep sea is one of the most biologically diverse and least studied ecosystems on the planet, there is much room for innovation in facilitating delicate interactions with a multitude of organisms. The biodiversity and physiology of shallow marine systems, such as coral reefs, are common study targets due to the easier nature of access; SCUBA diving allows for in situ delicate …

Exploring The Effect Of Different Numbers Of Convolutional Filters And Training Loops On The Performance Of Alphazero, Jared Prince

Masters Theses & Specialist Projects

In this work, the algorithm used by AlphaZero is adapted for dots and boxes, a two-player game. This algorithm is explored using different numbers of convolutional filters and training loops, in order to better understand the effect these parameters have on the learning of the player. Different board sizes are also tested to compare these parameters in relation to game complexity. AlphaZero originated as a Go player using an algorithm which combines Monte Carlo tree search and convolutional neural networks. This novel approach, integrating a reinforcement learning method previously applied to Go (MCTS) with a supervised learning method (neural networks) …

Enhancing 3d Visual Odometry With Single-Camera Stereo Omnidirectional Systems, Carlos A. Jaramillo

Dissertations, Theses, and Capstone Projects

We explore low-cost solutions for efficiently improving the 3D pose estimation problem of a single camera moving in an unfamiliar environment. The visual odometry (VO) task -- as it is called when using computer vision to estimate egomotion -- is of particular interest to mobile robots as well as humans with visual impairments. The payload capacity of small robots like micro-aerial vehicles (drones) requires the use of portable perception equipment, which is constrained by size, weight, energy consumption, and processing power. Using a single camera as the passive sensor for the VO task satisfies these requirements, and it motivates the …

Identification And Optimal Linear Tracking Control Of Odu Autonomous Surface Vehicle, Nadeem Khan

Mechanical & Aerospace Engineering Theses & Dissertations

Autonomous surface vehicles (ASVs) are being used for diverse applications of civilian and military importance such as: military reconnaissance, sea patrol, bathymetry, environmental monitoring, and oceanographic research. Currently, these unmanned tasks can accurately be accomplished by ASVs due to recent advancements in computing, sensing, and actuating systems. For this reason, researchers around the world have been taking interest in ASVs for the last decade. Due to the ever-changing surface of water and stochastic disturbances such as wind and tidal currents that greatly affect the path-following ability of ASVs, identification of an accurate model of inherently nonlinear and stochastic ASV system …

A Qualitative Research On Marketing And Sales In The Artificial Intelligence Age, Yin Yang, Keng Siau

Research Collection School Of Computing and Information Systems

The age of artificial intelligence is here! Artificial Intelligence, robotics, machine learning, and automation are impacting the field of marketing and sales in an unprecedented way. In this study, the qualitative research methodology will be used to better understand the revolution and evolution of marketing and sales field in the AI age. Multiple case studies will be performed in various marketing and sales units in different organizations. This research is of value to both academics and practitioners as it aims to provide a detailed analysis and documentation of the changes in marketing and sales functionalities and job markets as AI …

Design And Implementation Of An Artificial Neural Network Controller For Quadrotor Flight In Confined Environment, Ahmed Mekky

Mechanical & Aerospace Engineering Theses & Dissertations

Quadrotors offer practical solutions for many applications, such as emergency rescue, surveillance, military operations, videography and many more. For this reason, they have recently attracted the attention of research and industry. Even though they have been intensively studied, quadrotors still suffer from some challenges that limit their use, such as trajectory measurement, attitude estimation, obstacle avoidance, safety precautions, and land cybersecurity. One major problem is flying in a confined environment, such as closed buildings and tunnels, where the aerodynamics around the quadrotor are affected by close proximity objects, which result in tracking performance deterioration, and sometimes instability. To address this …

Developing An Affect-Aware Rear-Projected Robotic Agent, Ali Mollahosseini

Electronic Theses and Dissertations

Social (or Sociable) robots are designed to interact with people in a natural and interpersonal manner. They are becoming an integrated part of our daily lives and have achieved positive outcomes in several applications such as education, health care, quality of life, entertainment, etc. Despite significant progress towards the development of realistic social robotic agents, a number of problems remain to be solved. First, current social robots either lack enough ability to have deep social interaction with human, or they are very expensive to build and maintain. Second, current social robots have yet to reach the full emotional and social …

Application For Position And Load Reference Generation Of A Simulated Mechatronic Chain, Florentin Smarandache, V. Vladareanu, S.B. Cononovici, M. Migdalovici, H. Wang, Y. Feng

Branch Mathematics and Statistics Faculty and Staff Publications

The paper presents the position and load reference generation for a motor stand simulating a mechatronic chain, in this case a three degree of freedom robot leg. The task is accomplished using three PLC controlled motors in position as the robot joint actuators coupled with three controlled in torque, simulating the load at each simulation time-step. The paper briefly discusses the mathematical model and presents the visual interface used in the simulation, which is then to be further integrated into a virtual environment robot control application.

Resource Optimization In Wireless Sensor Networks For An Improved Field Coverage And Cooperative Target Tracking, Husam Sweidan

Dissertations, Master's Theses and Master's Reports

There are various challenges that face a wireless sensor network (WSN) that mainly originate from the limited resources a sensor node usually has. A sensor node often relies on a battery as a power supply which, due to its limited capacity, tends to shorten the life-time of the node and the network as a whole. Other challenges arise from the limited capabilities of the sensors/actuators a node is equipped with, leading to complication like a poor coverage of the event, or limited mobility in the environment. This dissertation deals with the coverage problem as well as the limited power and …

Crop Height Estimation With Unmanned Aerial Vehicles, Carrick Detweiler, David Anthony, Sebastian Elbaum

School of Computing: Faculty Publications

An unmanned aerial vehicle (UAV) can be configured for crop height estimation. In some examples, the UAV includes an aerial propulsion system, a laser scanner configured to face downwards while the UAV is in flight, and a control system. The laser scanner is configured to scan through a two-dimensional scan angle and is characterized by a maxi mum range. The control system causes the UAV to fly over an agricultural field and maintain, using the aerial propulsion system and the laser scanner, a distance between the UAV and a top of crops in the agricultural field to within a programmed …

Development Of A Locomotion And Balancing Strategy For Humanoid Robots, Emile Bahdi

Electronic Theses and Dissertations

The locomotion ability and high mobility are the most distinguished features of humanoid robots. Due to the non-linear dynamics of walking, developing and controlling the locomotion of humanoid robots is a challenging task. In this thesis, we study and develop a walking engine for the humanoid robot, NAO, which is the official robotic platform used in the RoboCup Spl. Aldebaran Robotics, the manufacturing company of NAO provides a walking module that has disadvantages, such as being a black box that does not provide control of the gait as well as the robot walk with a bent knee. The latter disadvantage, …

Review Of Deep Learning Methods In Robotic Grasp Detection, Shehan Caldera, Alexander Rassau, Douglas Chai

Research outputs 2014 to 2021

For robots to attain more general-purpose utility, grasping is a necessary skill to master. Such general-purpose robots may use their perception abilities to visually identify grasps for a given object. A grasp describes how a robotic end-effector can be arranged to securely grab an object and successfully lift it without slippage. Traditionally, grasp detection requires expert human knowledge to analytically form the task-specific algorithm, but this is an arduous and time-consuming approach. During the last five years, deep learning methods have enabled significant advancements in robotic vision, natural language processing, and automated driving applications. The successful results of these methods …

An Unmanned Aerial System For Prescribed Fires, Evan M. Beachly

School of Computing: Dissertations, Theses, and Student Research

Prescribed fires can lessen wildfire severity and control invasive species, but some terrains may be difficult, dangerous, or costly to burn with existing tools. This thesis presents the design of an unmanned aerial system that can ignite prescribed fires from the air, with less cost and risk than with aerial ignition from a manned aircraft. The prototype was evaluated in-lab and successfully used to ignite interior areas of two prescribed fires. Additionally, we introduce an approach that integrates a lightweight fire simulation to autonomously plan safe flight trajectories and suggest effective fire lines. Both components are unique in that they …

Formal Performance Guarantees For An Approach To Human In The Loop Robot Missions, Damian Lyons, Ron Arkin, Shu Jiang, Matt O'Brien, Feng Tang, Peng Tang

Faculty Publications

Abstract— A key challenge in the automatic verification of robot mission software, especially critical mission software, is to be able to effectively model the performance of a human operator and factor that into the formal performance guarantees for the mission. We present a novel approach to modelling the skill level of the operator and integrating it into automatic verification using a linear Gaussians model parameterized by experimental calibration. Our approach allows us to model different skill levels directly in terms of the behavior of the lumped, robot plus operator, system.

Using MissionLab and VIPARS (a behavior-based robot mission verification …

Developing Grounded Goals Through Instant Replay Learning, Lisa Meeden, Douglas S. Blank

Computer Science Faculty Research and Scholarship

This paper describes and tests a developmental architecture that enables a robot to explore its world, to find and remember interesting states, to associate these states with grounded goal representations, and to generate action sequences so that it can re-visit these states of interest. The model is composed of feed-forward neural networks that learn to make predictions at two levels through a dual mechanism of motor babbling for discovering the interesting goal states and instant replay learning for developing the grounded goal representations. We compare the performance of the model with grounded goal representations versus random goal representations, and find …

Motion Planning For Simple Two-Wheeled Robots, Ronald I. Greenberg, Jeffery M. Karp

Computer Science: Faculty Publications and Other Works

This paper considers various simple ways of navigating in a 2-dimensianal territory with a two-wheeled robot of a type typical in educational robotics. We determine shortest paths under various modes of operation and compare.

A Robotics Framework For Simulation And Control Of A Robotic Arm For Use In Higher Education, Craig Christensen

MS in Computer Science Project Reports

Robotic arms have been in common use for a several decades now in many areas from manufacturing and industrial uses to hobby projects and amusement park rides. However, there have been very few attempts to make an inexpensive robot arm with a software stack for use in higher education. This paper will outline a control and interfacing software stack built on the Robot Operating System (ROS) and a simulation of the 5 degree of freedom (DoF) robotic arm.

An Approach To Robust Homing With Stereovision, Fuqiang Fu, Damian Lyons

Faculty Publications

Visual Homing is a bioinspired approach to robot navigation which can be fast and uses few assumptions. However, visual homing in a cluttered and unstructured outdoor environment offers several challenges to homing methods that have been developed for primarily indoor environments. One issue is that any current image during homing may be tilted with respect to the home image. The second is that moving through a cluttered scene during homing may cause obstacles to interfere between the home scene and location and the current scene and location. In this paper, we introduce a robust method to improve a previous developed …

Pythagorean Approximations For Lego: Merging Educational Robot Construction With Programming And Data Analysis, Ronald I. Greenberg

Computer Science: Faculty Publications and Other Works

Abstract. This paper can be used in two ways. It can provide reference information for incorporating diagonal elements (for bracing or gear meshing) in educational robots built from standard LEGO kits. Alternatively, it can be used as the basis for an assignment for high school or college students to recreate this information; in the process, students will exercise skills in both computer programming and data analysis. Using the paper in the second way can be an excellent integrative experience to add to an existing course; for example, the Exploring Computer Science high school curriculum concludes with the units “Introduction to …