Computer Engineering Commons^™

Robust Control Of Contact-Rich Robots Via Neural Bayesian Inference, Nardos Ayele Ashenafi

Boise State University Theses and Dissertations

We provide several data-driven control design frameworks for contact-rich robotic systems. These systems exhibit continuous state flows and discrete state transitions, which are governed by distinct equations of motion. Hence, it is difficult to design a single policy that can control the system in all modes. Typically, hybrid systems are controlled by multi-modal policies, each manually triggered based on observed states. However, as the number of potential contacts increase, the number of policies can grow exponentially and the control-switching scheme becomes too complicated to parameterize. To address this issue, we design contact-aware data-driven controllers given by deep-net mixture of experts. …

Underwater Robot Path Planning In An Intermittent Communication System, Hunter Gallant

Dartmouth College Master’s Theses

Sunflower, a novel cross-medium localization system between an aerial drone and an underwater robot, has not yet been implemented in a multi-robot exploration system. This project’s aim was to simulate various configurations of multi-robot systems, and to create an algorithm, called AdjustPath, to improve exploration and avoid inter- robot collisions. With three, five, seven, and ten simulated underwater robots, there was significant improvement when the AdjustPath algorithm was used. Knowing this, future hardware using the Sunflower system could use this proposed algorithm to increase efficiency and avoid more collisions.

Implementation Of Static Rfid Landmarks In Slam For Planogram Compliance, Brennan L. Drake

Honors College Theses

Autonomous robotic systems are becoming increasingly prevalent in everyday life and exhibit robust solutions in a wide range of applications. They face many obstacles with the foremost of which being SLAM, or Simultaneous Localization and Mapping, that encompasses both creation of the map of an unknown environment and localization of the robot in said environment. In this experiment, researchers propose the use of RFID tags in a semi-dynamic commercial environment to provide concrete landmarks for localization and mapping in pursuit of increased locational certainty. With this obtained, the ultimate goal of the research is to construct a robotics platform for …

Claw Hand Activity, Admin Stem For Success, Natalie Wilson

STEM for Success Showcase

Activity plan where students practice coding principles by programming the actions of a claw hand

Chatgpt As Metamorphosis Designer For The Future Of Artificial Intelligence (Ai): A Conceptual Investigation, Amarjit Kumar Singh (Library Assistant), Dr. Pankaj Mathur (Deputy Librarian)

Library Philosophy and Practice (e-journal)

Abstract

Purpose: The purpose of this research paper is to explore ChatGPT’s potential as an innovative designer tool for the future development of artificial intelligence. Specifically, this conceptual investigation aims to analyze ChatGPT’s capabilities as a tool for designing and developing near about human intelligent systems for futuristic used and developed in the field of Artificial Intelligence (AI). Also with the helps of this paper, researchers are analyzed the strengths and weaknesses of ChatGPT as a tool, and identify possible areas for improvement in its development and implementation. This investigation focused on the various features and functions of ChatGPT that …

Understanding And Quantifying Human Factors In Programming From Demonstration: A User Study Proposal, Shakra Mehak, Aayush Jain, John D. Kelleher, Philip Long, Michael Guilfoyle, Maria Chiara Leva

Conference papers

Programming by demonstration (PbD) is a promising method for robots to learn from direct, non-expert human interaction. This approach enables the interactive transfer of human skills to the robot. As the non-expert user is at the center of PbD, the efficacy of the learned skill is largely dependent on the demonstrations provided. Although PbD methods have been extensively developed and validated in the field of robotics, there has been inadequate confirmation of their effectiveness from the perspective of human teachability. To address this gap, we propose to experimentally investigate the impact of communicating robot learning process on the efficacy of …

Incorporating Novel Sensors For Reading Human Health State And Motion Intent Into Real-Time Computing Systems, Adam Sawyer

Masters Theses

"Integrating sensors that read states of the human body into everyday life is an increasing desire, especially with the rise of deep learning which requires vast stores of data to make predictions. This work explores integrating these sensors into the human experience through two methods and recording the results. The first of these methods integrates a MXene based field-effect transistor sensor for the 2019-nCov spike protein with a mobile app. This allows the user to read how saturated their breath is with Covid-19. The second method integrates 3D-printed pressure sensors, and a motion capture system, into a glove to read …

Parallel Real Time Rrt*: An Rrt* Based Path Planning Process, David Yackzan

Theses and Dissertations--Mechanical and Aerospace Engineering

This thesis presents a new parallelized real-time path planning process. This process is an extension of the Real-Time Rapidly Exploring Random Trees* (RT-RRT*) algorithm developed by Naderi et al in 2015 [1]. The RT-RRT* algorithm was demonstrated on a simulated two-dimensional dynamic environment while finding paths to a varying target state. We demonstrate that the original algorithm is incapable of running at a sufficient rate for control of a 7-degree-of-freedom (7-DoF) robotic arm while maintaining a path planning tree in 7 dimensions. This limitation is due to the complexity of maintaining a tree in a high-dimensional space and the network …

Evaluation Of Lidar Uncertainty And Applications Towards Slam In Off-Road Environments, Zachary D. Jeffries

Dissertations, Master's Theses and Master's Reports

Safe and robust operation of autonomous ground vehicles in all types of conditions and environment necessitates complex perception systems and unique, innovative solutions. This work addresses automotive lidar and maximizing the performance of a simultaneous localization and mapping stack. An exploratory experiment and an open benchmarking experiment are both presented. Additionally, a popular SLAM application is extended to use the type of information gained from lidar characterization, demonstrating the performance gains and necessity to tightly couple perception software and sensor hardware. The first exploratory experiment collects data from child-sized, low-reflectance targets over a range from 15 m to 35 m. …

Neuromorphic Computing Applications In Robotics, Noah Zins

Dissertations, Master's Theses and Master's Reports

Deep learning achieves remarkable success through training using massively labeled datasets. However, the high demands on the datasets impede the feasibility of deep learning in edge computing scenarios and suffer from the data scarcity issue. Rather than relying on labeled data, animals learn by interacting with their surroundings and memorizing the relationships between events and objects. This learning paradigm is referred to as associative learning. The successful implementation of associative learning imitates self-learning schemes analogous to animals which resolve the challenges of deep learning. Current state-of-the-art implementations of associative memory are limited to simulations with small-scale and offline paradigms. Thus, …

Human Tracking Function For Robotic Dog, Andrew Sharkey

Williams Honors College, Honors Research Projects

With the increase the increase in automation and humans and robots working side by side, there is a need for a more organic way of controlling robots. The goal of this project is to create a control system for Boston dynamics robotic dog Spot that implements human tracking image software to follow humans using computer vision as well as using hand tracking image software to allow for control input through hand gestures.

Initiating Change In Care: Socially Assistive Robots, Sooraj Sushama

Theses and Dissertations

Socially assistive robots (SAR) are autonomous machines equipped with sensors and software that allow them to interact socially with humans. SAR robots are commonly used in healthcare settings to provide patients with non-clinical support, such as conversation and emotional companionship. SARs can also deliver reminders, monitor vital signs, and provide educational information about health conditions or medications. Researchers have studied SAR applications in detail. Additionally, there has been prior research on SAR where users' sociodemographic factors and technology acceptance were studied. But even though the backbone of SAR is an advanced technology, no known research has been done on users' …

Space Force Design Project, Emily Greene, Ashton Orosa, Julia Patek, Nathan Doty

Williams Honors College, Honors Research Projects

The objective of our research project is to develop a lab testbed composed of a curved surface to represent a spacecraft hull, a mobile robot equipped with repair tools, and a robotic arm equipped with a laser 3D scanner. This project is part of a larger grant to the University of Akron from Space Force and Air Research Labs. The lab testbed developed in this project will be used to assist in creating and testing a software and algorithm to inspect and repair spacecraft while in orbit. The project will involve researching spacecraft hulls to create an accurate simulation bed, …

Motion Planning In Artificial And Natural Vector Fields, Bernardo Martinez Rocamora Junior

Graduate Theses, Dissertations, and Problem Reports (ETD)

This dissertation advances the field of autonomous vehicle motion planning in various challenging environments, ranging from flows and planetary atmospheres to cluttered real-world scenarios. By addressing the challenge of navigating environmental flows, this work introduces the Flow-Aware Fast Marching Tree algorithm (FlowFMT*). This algorithm optimizes motion planning for unmanned vehicles, such as UAVs and AUVs, navigating in tridimensional static flows. By considering reachability constraints caused by vehicle and flow dynamics, flow-aware neighborhood sets are found and used to reduce the number of calls to the cost function. The method computes feasible and optimal trajectories from start to goal in challenging …

A Mechanically Intelligent Hosing-Drone, Blake Hament

UNLV Theses, Dissertations, Professional Papers, and Capstones

This manuscript presents a ”mechanically intelligent” approach to designing a Hosing-Drone for heavy-duty pressure washing. Spraying a hose creates strong reaction forces and torques. Previously demonstrated spraying robots are over-engineered to be very massive with huge inertias. These high inertias ”wash out” the reaction from the spraying. In the proposed approach, the contributions from all observable fluid dynamics, fluid structure interactions, and aerodynamics are studied individually and for the coupled system. Experimental data is collected and fit to dynamic models. These models are used to design a smaller, lighter, more agile vehicle than has been previously demonstrated. An impedance controller …

Enabling The Human Perception Of A Working Camera In Web Conferences Via Its Movement, Anish Shrestha

LSU Master's Theses

In recent years, video conferencing has seen a significant increase in its usage due to the COVID-19 pandemic. When casting user’s video to other participants, the videoconference applications (e.g. Zoom, FaceTime, Skype, etc.) mainly leverage 1) webcam’s LED-light indicator, 2) user’s video feedback in the software and 3) the software’s video on/off icons to remind the user whether the camera is being used. However, these methods all impose the responsibility on the user itself to check the camera status, and there have been numerous cases reported when users expose their privacy inadvertently due to not realizing that their camera is …

Developing A Miniature Smart Boat For Marine Research, Michael Isaac Eirinberg

Computer Engineering

This project examines the development of a smart boat which could serve as a possible marine research apparatus. The smart boat consists of a miniature vessel containing a low-cost microcontroller to live stream a camera feed, GPS telemetry, and compass data through its own WiFi access point. The smart boat also has the potential for autonomous navigation. My project captivated the interest of several members of California Polytechnic State University, San Luis Obispo’s (Cal Poly SLO) Marine Science Department faculty, who proposed a variety of fascinating and valuable smart boat applications.

Mars Rover Mechanical Arm & Turret, Kendall C. Chappell, Kyle D. Peterson, Rodrigo Gonzalez, Sam Cole

Mechanical Engineering

The Rover Mechanical Arm and Turret (RAT) team was originally tasked with designing and building a mechanical arm to attach to the Exo Mars rover: a project headed by Cal Poly professor, Rich Murray. The rover will be the 3rd in a series of rovers sponsored by Murray. Through ideation, comparison studies, research, and prototyping, the RAT team determined a design capable of fulfilling the sponsor’s specifications. The concept design is lightweight, durable, and capable of 4 degrees of freedom. With two links and a mechanical claw, the rover arm has the capability to retrieve small rock samples from Mars's …

Design And Control Of Next-Generation Uavs For Effectively Interacting With Environments, Caiwu Ding

Dissertations

In this dissertation, the design and control of a novel multirotor for aerial manipulation is studied, with the aim of endowing the aerial vehicle with more degrees of freedom of motion and stability when interacting with the environments. Firstly, it presents an energy-efficient adaptive robust tracking control method for a class of fully actuated, thrust vectoring unmanned aerial vehicles (UAVs) with parametric uncertainties including unknown moment of inertia, mass and center of mass, which would occur in aerial maneuvering and manipulation. The effectiveness of this method is demonstrated through simulation. Secondly, a humanoid robot arm is adopted to serve as …

Cloudbots: Autonomous Atmospheric Explorers, Akash Binoj

Honors Scholar Theses

The CloudBot is an autonomous weather balloon that operates on the principle of variable buoyancy to ascend and descend in the atmosphere. This project aims to develop a device that will collect atmospheric measurements and communicate them mid-flight. The apparatus consists of a helium-filled balloon, the robotic payload, and an air cell. The fixed-volume helium balloon at the top provides an upwards buoyancy force, while the air cell at the bottom can hold a variable amount of pressure to adjust the weight of the CloudBot. By doing so, it is able to travel in storm conditions and collect valuable atmospheric …

Characterizing And Predicting Human Visual Perception Of Unmanned Aerial Vehicle Gestures, Paul Fletcher

School of Computing: Dissertations, Theses, and Student Research

Unmanned Aerial Vehicles (UAVs) are being used in public domains and hazardous environments where effective communication strategies are critical. UAV gesture techniques have been shown to communicate meaning to human observers and may be ideal in contexts that require lightweight systems such as unmanned aerial flight, however, this work may be limited to an idealized range of viewer perspectives. As gesture is a visual communication technique it is necessary to consider how the perception of a robot gesture may suffer from obfuscation or self-occlusion from some viewpoints. This thesis presents the results of three online user-studies that examine participants’ ability …

A Low-Cost And Low-Tech Solution To Test For Variations Between Multiple Offline Programming Software Packages., Steffen Wendell Bolz

Masters Theses & Specialist Projects

This research paper chronicles the attempt to bring forth a low-cost and low-tech testing methodology whereby multiple offline programming (OLP) software packages’ generated programs may be compared when run on industrial robots. This research was initiated by the discovery that no real research exists to test between iterations of OLP software packages and that most research for positional accuracy and/or repeatability on industrial robots is expensive and technologically intensive. Despite this, many countries’ leaders are pushing for intensive digitalization of manufacturing and Small and Mediumsized Enterprises (SMEs) are noted to be lagging in adoption of such technologies. The research consisted …

A Water-Surface Self-Leveling Landing Platform For Small-Scale Uavs, Mbidi Santos

Electronic Theses and Dissertations

Because many of the most widely used UAVs, such as the Vertical Take-Off and Landing (VTOL), cannot land securely on sloped or fast-changing surfaces, there is a need to design better deployment and landing stations. This document proposes an approach to design a water-surface self-leveling landing platform by implementing the best concept to be used as a safe ground for UAVs to land and deploy on open waters. After conceptualizing multiple design ideas, these options were laid out in a decision matrix with four criteria: degrees of freedom, mechanical complexity, manufacturing, and cost. The chosen concept was the spherical parallel …

Can We Make Our Robot Play Soccer? Influence Of Collaborating With Preservice Teachers And Fifth Graders On Undergraduate Engineering Students' Learning During A Robotic Design Process (Work In Progress), Krishnanand Kaipa, Jennifer Kidd, Julia Noginova, Francisco Cima, Stacie Ringleb, Orlando Ayala, Pilar Pazos, Kristie Gutierrez, Min Jung Lee

Mechanical & Aerospace Engineering Faculty Publications

This work-in-progress paper describes engineering students’ experiences in an NSF-funded project that partnered undergraduate engineering students with pre-service teachers to plan and deliver robotics lessons to fifth graders at a local school. This project aims to address an apparent gap between what is taught in academia and industry’s expectations of engineers to integrate perspectives from outside their field to solve modern societal problems requiring a multidisciplinary approach. Working in small teams over Zoom, participating engineering, education, and fifth grade students designed, built, and coded bio-inspired COVID companion robots. The goal for the engineering students was to build new interprofessional skills, …

Developing Reactive Distributed Aerial Robotics Platforms For Real-Time Contaminant Mapping, Joshua Ashley

Theses and Dissertations--Electrical and Computer Engineering

The focus of this research is to design a sensor data aggregation system and centralized sensor-driven trajectory planning algorithm for fixed-wing aircraft to optimally assist atmospheric simulators in mapping the local environment in real-time. The proposed application of this work is to be used in the event of a hazardous contaminant leak into the atmosphere as a fleet of sensing unmanned aerial vehicles (UAVs) could provide valuable information for evacuation measures. The data aggregation system was designed using a state-of-the-art networking protocol and radio with DigiMesh and a process/data management system in the ROS2 DDS. This system was tested to …

Design Of Human Inspired Feet For Mithra, A High-Performance Humanoid Robot, Spencer Lyle Brewster

Electronic Theses and Dissertations

This thesis explores the foot design for the new humanoid robot Mithra, with the goal to improve impact mitigation, natural gait throughout the gait cycle and balance. Using human gait parameters, a stiff aluminum foot was designed to emulate human center of pressure rollover trajectories. In addition, a 2D dynamic Finite Element Analysis (FEA) of the gait cycle was created in Abaqus to rapidly prototype foot designs. Data from the FE model provided impact forces, parameters for distal foot power evaluation and maximum lean angles. From this model a flexible nylon foot was optimized for the given design objectives. The …

Factors Influencing The Effectiveness Of Managing Human–Robot Teams, Theodore B. Terry

Walden Dissertations and Doctoral Studies

Certain factors can influence the capabilities of a robot–human team by affecting their social and behavioral dynamics in a work environment. But these factors were not known due to the progressive nature of human–robot partnerships and a lack of peer-reviewed literature on the topic. This e-Delphi study aimed to identify and understand these unknown influential factors based on the participants’ insights. The overarching research question asked about the need to determine factors that might influence the effectiveness of managing human-robot teams. The basis for the conceptual framework for this study was the theory of communication used in organizational management. Twelve …

Learning Robot Motion From Creative Human Demonstration, Charles C. Dietzel

Theses and Dissertations

This thesis presents a learning from demonstration framework that enables a robot to learn and perform creative motions from human demonstrations in real-time. In order to satisfy all of the functional requirements for the framework, the developed technique is comprised of two modular components, which integrate together to provide the desired functionality. The first component, called Dancing from Demonstration (DfD), is a kinesthetic learning from demonstration technique. This technique is capable of playing back newly learned motions in real-time, as well as combining multiple learned motions together in a configurable way, either to reduce trajectory error or to generate entirely …

Collaborative Human-Machine Interfaces For Mobile Manipulators., Shamsudeen Olawale Abubakar

Electronic Theses and Dissertations

The use of mobile manipulators in service industries as both agents in physical Human Robot Interaction (pHRI) and for social interactions has been on the increase in recent times due to necessities like compensating for workforce shortages and enabling safer and more efficient operations amongst other reasons. Collaborative robots, or co-bots, are robots that are developed for use with human interaction through direct contact or close proximity in a shared space with the human users. The work presented in this dissertation focuses on the design, implementation and analysis of components for the next-generation collaborative human machine interfaces (CHMI) needed for …

A Human-Embodied Drone For Dexterous Aerial Manipulation, Dongbin Kim

UNLV Theses, Dissertations, Professional Papers, and Capstones

Current drones perform a wide variety of tasks in surveillance, photography, agriculture, package delivery, etc. However, these tasks are performed passively without the use of human interaction. Aerial manipulation shifts this paradigm and implements drones with robotic arms that allow interaction with the environment rather than simply sensing it. For example, in construction, aerial manipulation in conjunction with human interaction could allow operators to perform several tasks, such as hosing decks, drill into surfaces, and sealing cracks via a drone. This integration with drones will henceforth be known as dexterous aerial manipulation.

Our recent work integrated the worker’s experience into …