Computer Engineering Commons^™

Exploring The Benefits, Barriers, And Sustainability Of Community Stem Partnerships: A Qualitative Case Study On Stem Collaboration In Elementary Education, Katherine M. Blagden

Open Access Dissertations

In an era of increasing emphasis on science, technology, engineering, and mathematics (STEM) education, elementary schools often face significant challenges in implementing high-quality, integrated STEM instruction. These challenges include limited resources, inconsistent professional development, and a lack of access to real-world, community-based learning experiences (Dorph et al., 2018; National Science Board, 2024). This dissertation explores how collaborative partnerships among elementary schools, community organizations, and industry professionals can overcome these barriers and foster meaningful, sustainable STEM learning opportunities for young students. Drawing on the Asset-Based Community Development (ABCD) model (Kretzmann & McKnight, 1993) and informed by a constructivist theoretical framework (Vygotsky, …

Navigating Human-Robotic Interaction Challenges In Teaching-By-Demonstration, Shakra Mehak

Doctoral

The advancement in interdisciplinary research domains, like robotics and HRI, presents a challenging task. It is an exception rather than the norm for research to extend beyond the boundaries of individual disciplines and encompass the challenges presented by other fields of study. This project is part of ”Collaborative Intelligence for Safety Critical Systems” (CISC), which is a Marie Curie Training Network funded by the European Commission to hire and train researchers with the expertise and skillset necessary to carry out the major tasks required to develop a Collaborative Intelligence system. The program encompasses four overarching themes: Artificial Intelligence (AI), Human …

Autonomous Landscape Exploration Rover Using Imaging Surface Navigation (Alexis), Noah Jones, Dominic Salupo

Williams Honors College, Honors Research Projects

The objective is to develop a small-form-factor rover prototype that can be used to prove out a novel traversal method for use on extraterrestrial surfaces. The novel traversal method being proposed is LIDAR/CV-enhanced navigation, provided by a detachable flight vehicle that can communicate with the rover. On planets with thin atmospheres, cold gas thrusters or similar may be needed, but for the scope of this project more traditional flight/propulsion methods will be used.

Development And Prototyping Of A Modular Quadruped Towards Testing Standardization For Legged Robot Stability, Michael Conner Larsen

Graduate Research Theses & Dissertations

Legged robots are well-suited for navigating uneven and unmapped terrain, making them valuable in various robotics applications. Maintaining balance and stability in such environments relies on a combination of sensors, control strategies, and mechanical design. However, selecting the most effective sensing and control method for a given use case remains challenging. Previous studies have explored various approaches, integrating combinations of joint angle measurement, inertial measurement units (IMUs), torque-based control, leg force measurement, image processing, and machine learning, paired with numerous controller designs, which can contribute to stability. However, direct comparisons of these methods are often limited by the need for …

Mechanically Cost-Effective Approach For Bipedal Walking In Robots Using Instantaneous Collision Angle, Smit R. Patel

UNLV Theses, Dissertations, Professional Papers, and Capstones

Humans, as bipedal locomotors, are effective at reducing the mechanical cost of transport (CoTmech) by adopting movement strategies and gaits that minimize energy expenditure for a given distance. By using different gaits at different speeds, leveraging their long spring-like tendons and muscle elasticity which store and release energy during movement, humans reduce the mechanical effort required for locomotion. Current locomotion solutions offered in bipedal robots, based on legacy walking and running gait models, are not great at energy efficiency unless walking at very low speeds. Additionally, the control system of robots, designed to ensure stability and adaptability, requires substantial resources, …

Pseudo Gps For Romi, Emmanuel Baez, Owen Guinane, Gabriel Coria, Conor Schott

Mechanical Engineering

The Pseudo-GPS system for Romi robots addresses the need for precise real-time location tracking in Cal Poly's Mechatronics lab. This project, developed by Emmanuel Baez, Gabriel Coria, Owen Guinane, and Conor Schott, under the guidance of instructor Charlie Refvem, provides a proof-of-concept system to enhance the Romi robots' geolocation capabilities for advanced robotic algorithms.

The proposed system uses a Raspberry Pi 4 equipped with a Pi camera module and ArUco markers to track the position and orientation of Romi robots within a lab environment. Custom 3D-printed stands secure markers on the robots, and a designated origin marker defines the coordinate …

End-To-End Learning For A Low-Cost Robotics Arm, Abhishek Chothani

Theses and Dissertations

Robotic manipulation is a cornerstone of automation, with the ultimate goal of developing versatile systems capable of executing a wide range of real-world tasks autonomously. Traditional robotics approaches, while reliable and widely adopted in industrial settings, often struggle with adaptability, perception, and dynamic task execution. This thesis explores the evolution from classical robotics techniques to modern learning-based approaches, leveraging advancements in artificial intelligence to overcome these limitations.

Initially, the thesis presents a pick-and-place pipeline built using the Drake robotics framework and the KUKA iiwa robotic arm. This system employs a pseudoinverse controller for inverse kinematics to perform structured tasks like …

Improving Robustness Of Learning-Based Approaches In Autonomous Systems And Engineering Education, Godwyll Aikins

Theses and Dissertations

This dissertation advances the development of robust learning-based approaches across two complementary domains: engineering education and autonomous systems. Through four studies, this research addresses critical challenges in preparing data-proficient engineers and developing reliable autonomous systems that can operate under uncertainty and incomplete information. The engineering education study examines how mechanical and aerospace engineering undergraduates conceptualize and develop data proficiency skills essential for modern engineering practice. Through interviews with 27 students, the research employs the How People Learn framework to analyze student perspectives on information literacy, data interpretation, and computational thinking. The findings inform pedagogical strategies for developing data proficiency in …

Computer Vision In A Robotic Arm, Jack Maxwell

College of Engineering Summer Undergraduate Research Program

We used a machine learning-based object detection algorithm to give a robotic arm the ability to "see" with its camera.

Dynamic Maze Puzzle Navigation Using Deep Reinforcement Learning, Luisa Shu Yi Chiu

Master's Theses

The implementation of deep reinforcement learning in mobile robotics offers a great solution for the development of autonomous mobile robots to efficiently complete tasks and transport objects. Reinforcement learning continues to show impressive potential in robotics applications through self-learning and biological plausibility. Despite its advancements, challenges remain in applying these machine learning techniques in dynamic environments. This thesis explores the performance of Deep Q-Networks (DQN), using images as an input, for mobile robot navigation in dynamic maze puzzles and aims to contribute to advancements in deep reinforcement learning applications for simulated and real-life robotic systems. This project is a step …

Adaptive Robot Collaboration Using Robotic Skin And Motion Similarity., Jordan Dowdy

Electronic Theses and Dissertations

An essential part of robotics research is human-robot collaboration, which enables the use of current and new robots in everyday life and the workforce. This research applies to both parts of human-robot collaboration: physical human-robot interaction (pHRI), as well as non-physical human-robot interaction. The physical interaction uses tactile sensors and a Neuroadaptive Controller (NAC) to allow for the guidance of a robotic arm and its end-effector. The non-physical interaction uses a novel motion similarity metric, the Cartesian Segment Online Dynamic Time-Warping (SODTW), to allow a robot to better adapt to the speed of the user performing the motion during imitation …

Robotics Lab With The Lego Spike Prime Robot, Susan Imberman, Tatiana Anderson, Chang Guo, Vladimir Frants, Daniel Agman, Orit D. Gruber

Open Educational Resources

This lab introduces the field of Robotics. Robotics is a field that combines Artificial Intelligence with Engineering. In this lab, the student will be experimenting with the LEGO® Spike Prime Robot. The student's final report should include a copy of all the completed answers, program code, and observations.

After completing this lab experiment, the student will proceed to answer the following questions in the Observations section at the end of the lab report:

• List some applications of robotics in daily living and industry ?

• How does a robot sense and react to its environment?

• What new ideas were observed during …

Development Of A Rule-Based Monitoring System For Autonomous Heavy Equipment Safety, Amirpooya Shirazi

Department of Construction Engineering and Management: Dissertations, Theses, and Student Research

Roadway construction work zones are constantly exposed to interactions among construction equipment, workers, and vehicles. Furthermore, ensuring safety in these areas is considered a challenging task due to the complexity of the environment. As shown in the rising trend of fatal accidents in roadway work zones, current OSHA regulations in construction safety are insufficient in effectively detecting unsafe situations and mitigating the risks. Furthermore, best practices, such as internal traffic control planning (ITCP), exhibit critical limitations requiring continuous monitoring of active work zones as well as adjustments to the site coordination plans due to the dynamic nature of work zone …

Bridging Design And Perception: Novel Tools And Technologies For Creating Effective Human-Robot Interactions, Benjamin Dossett

Electronic Theses and Dissertations

This thesis explores human perception of robots through the use of novel tools and technologies. First, the impact of Augmented Reality (AR) data presentation on human perception of robots is investigated. A study conducted with the AR human-robot teaming system found that robot performance significantly influenced participants’ perceptions, overshadowing the impact of matching or mismatching robot confidence feedback. Second, the DU Want to Build-A-Bot platform is presented, which enables participatory robot design and opens the door for novel research of how robot design affects human perception. The Build-A-Bot platform enables the collection of diverse robot designs, facilitating machine learning analysis …

Technocene, Vir Joseph Naidu

Masters Theses

Embodied human communication within the Anthropocene. Existing at the intersection of technology, and the body.

The design industry has developed technology that is, paradoxically, isolating. The exposure to a vast audience in the digital sphere has introduced new societal pressures, leading to a disconnection from our immediate surroundings, detached, and donning metaphorical masks. Technocene lives on the fringes of the discipline by blending conceptual thinking with practical application. Through curious, experimental artifacts, it prompts us to shed our masks and embrace vulnerability. Technocene endeavors to reimagine the human experience by acting as a discursive design project. It probes the boundaries …

Flexible Strain Gauge Sensors As Real-Time Stretch Receptors For Use In Biomimetic Bpa Muscle Applications, Rochelle Jubert

Student Research Symposium

This work presents a novel approach to real-time length sensing for biomimetic Braided Pneumatic Actuators (BPAs) as artificial muscles in soft robotics applications. The use of artificial muscles enables the development of more interesting robotic designs that no longer depend on single rotation joints controlled by motors. Developing robots with these capabilities, however, produces more complexities in control and sensing. Joint encoders, the mainstay of robotic feedback, can no longer be used, so new methods of sensing are needed to get feedback on muscle behavior to implement intelligent controls. To address this need, flexible strain gauge sensors from Portland company, …

Developing Resilient Defense Strategies Against Pheromone-Based Attacks In Foraging Robot Swarms, Ryan A. Luna

Theses and Dissertations

This thesis delves into the security of stochastic pheromone-based foraging algorithms within swarm robotic systems, a subset of foraging algorithms distinguished by their reliance on probabilistic decision-making mechanisms inspired by the natural world. Such algorithms face vulnerabilities in stigmergic communication that threaten to disrupt swarm operations. This research investigates these vulnerabilities, presenting two distinct contributions.

The first contribution examines the implementation of quarantine strategies as a defensive measure to isolate and mitigate the impact of fake resource attacks. By simulating these attacks, this study quantitatively assesses their detrimental effects on swarm efficiency and explores the efficacy …

Deep Reinforcement Learning Of Variable Impedance Control For Object-Picking Tasks, Akshit Lunia

All Theses

The increasing deployment of robots in industries with varying tasks has accelerated the development of various control frameworks, enabling robots to replace humans in repetitive, exhaustive, and hazardous jobs. One critical aspect is the robots' interaction with their environment, particularly in unknown object-picking tasks, which involve intricate object weight estimations and calculations when lifting objects. In this study, a unique control framework is proposed to modulate the force exerted by a manipulator for lifting an unknown object, eliminating the need for feedback from a force/torque sensor. The framework utilizes a variable impedance controller to generate the required force, and an …

Algorithms For Safe And Robust Motion Control Of Autonomous Ground Robots And Vehicles, Manavendra Desai

Wayne State University Dissertations

This dissertation explores, investigates, develops and experimentally validates algorithms for safe and robust motion control of ground robots and vehicles. The emphasis is on design of controllers for ground autonomy with safety either embedded by design or enforced by appropriately wrapping a safety net around an existing nominal controller.

Ground robots have been considered for their importance in compensating for labour or personnel shortage for material handling in the manufacturing, logistics and healthcare sectors. On the other hand, ground vehicles have been considered for the existing potential of making driver assistance systems safer and more intelligent, particularly in at-the-limit driving …

A Learning-Based Framework For Autonomous Robotic Operations In Resource-Denied Environments, Joseph M. Cloud

Computer Science and Engineering Dissertations - Archive

Establishing a sustained human presence beyond Earth necessitates the development of autonomous systems capable of extracting and utilizing local resources. On the Moon, in-situ resource utilization (ISRU) is essential to reduce the dependency on Earth-based supplies. Leveraging lunar resources such as water ice for life support and fuel production or regolith for surface construction will enable long-term lunar missions and future deep space exploration. NASA's Artemis program is targeting the lunar south pole (LSP), an area with raw, yet abundant resources available. The harsh environmental conditions present significant challenges for humans operating and installing surface infrastructure. Autonomous robotic systems are …

On Uncertainty For Ill-Posed Robot Decision Problems, Jared Joseph Beard

Graduate Theses, Dissertations, and Problem Reports (ETD)

As robots adopt more real world responsibilities, they will be expected to solve more complicated problems. In some cases limited prior knowledge will result in unmodelled environmental conditions; in others, multiple users may have competing perspectives on how to frame a decision problem. Many existing frameworks, namely Markov decision processes (MDP) presuppose users have identified a specific problem with models sufficient to solve or learn a problem. If we wish to extend MDPs to novel problems or those heavily dependent on user feedback, autonomous decision makers must be able to identify limitations in how a given problem is framed and …

Learned Modeling And Control Of Continuum Robots For Surgical Applications, Cameron Jack Wolfe

Dartmouth College Master’s Theses

To reduce morbidity and mortality during surgery, surgeons have increasingly turned to Minimally Invasive Surgery (MIS), which involves passing instruments through small incisions or natural orifices to minimize patient trauma. Although MIS has significantly improved patient outcomes, it hinders a surgeon's dexterity and impairs visual and tactile feedback. These deficiencies have prompted the adoption of Robot-Assisted Surgery (RAS), in which surgeons control robots instead of using handheld instruments. While RAS has improved patient outcomes, robots struggle to navigate constricted spaces due to their rigidity, spurring the development of Continuum Robots (CRs). These flexible infinite degree-of-freedom robots move by bending, allowing …

Enhancing Robotic Exploration Through Semantically-Guided Sampling Strategies, Christopher Alexander Arend Tatsch

Graduate Theses, Dissertations, and Problem Reports (ETD)

From space and deep-sea exploration to disaster response and environmental monitoring, autonomous robots are essential for advancing science, improving safety, and addressing critical challenges. This dissertation introduces a novel open-source strategy for autonomous robotic exploration: the Semantically-Guided Exploration (SGE) framework. Designed for ground vehicles, SGE integrates semantic understanding into the autonomous exploration process, improving decision-making in complex environments. Specifically, the proposed sampling-based approach uses the information from the semantic segmentation of RGB images and depth images to guide the robot's selection of exploration goals. This method enables the robot to steer away from potential dangers such as large rocks and …

Artificial Intelligence In Education: Mathematics Teachers’ Perspectives, Practices And Challenges, Mohammad A. Tashtoush, Yousef Wardat, Rommel Al Ali, Shoeb Saleh

Iraqi Journal for Computer Science and Mathematics

Efforts have been made to include artificial intelligence (AI) in teaching and learning; nevertheless, the successful deployment of new instructional technology depends on the attitudes of the teachers who conduct the lesson. Few scholars have researched teachers' perspectives on AI use due to a general lack of expertise on how it can be used in the classroom, as well as a lack of specific knowledge about what AI-adopted tools would be like. This study investigated mathematics teachers’ perceptions of implemented AI systems and applications in Abu Dhabi Emirate schools. The sample study consists of 580 male and female math teachers …

Modeling And Control For Precision Robotic Machining, Patrick Bazzoli

Doctoral Dissertations

"Robots are used in a wide variety of manufacturing applications, but machining applications in which robots can excel are limited by their lower accuracy and stiffness relative to traditional CNC machines. This work is composed of two parts: one to evaluate a robot’s accuracy and one to compensate for the vibrations of the robot due to its lower stiffness.

In order to evaluate whether a robot has the necessary accuracy to perform a given machining task, Paper 1 discusses a novel Model Invalidation method. This methodology provides a statistical framework as well as a measurement strategy for determining if a …

Initial Solution Improvements To A Tethered Robotic Path Planner Using Random Geometric Graph Configurations And Biased Sampling, Austen J. Goddu

Dissertations, Master's Theses and Master's Reports

With NASA's ongoing efforts to establish a presence on the lunar surface to eventually move on to exploring mars, the development of intelligent robotic systems is more important than ever. The ability of robotics to explore hazardous and extreme terrain, coupled with long communication times from earth places an ever increasing need on more robust and efficient autonomy. Tethered robotics offer unique advantages to explore scientific targets both on the lunar and martian surfaces, capable of using their tether as a physical or metaphorical lifeline to allow the exploration of slopes, extreme dark regions, or areas in which wireless communication …

Brunet: Disruption-Tolerant Tcp And Decentralized Wi-Fi For Small Systems Of Vehicles, Nicholas Brunet

Master's Theses

Reliable wireless communication is essential for small systems of vehicles. However, for small-scale robotics projects where communication is not the primary goal, programmers frequently choose to use TCP with Wi-Fi because of their familiarity with the sockets API and the widespread availability of Wi-Fi hardware. However, neither of these technologies are suitable in their default configurations for highly mobile vehicles that experience frequent, extended disruptions. BRUNET (BRUNET Really Useful NETwork) provides a two-tier software solution that enhances the communication capabilities for Linux-based systems. An ad-hoc Wi-Fi network permits decentralized peer-to-peer and multi-hop connectivity without the need for dedicated network infrastructure. …

Lrtransformer: Learn-Region Transformer For Object-Agnostic Point Cloud Segmentation, Dipesh Gyawali

LSU Master's Theses

3D point cloud segmentation segments the 3D point cloud data into different regions/instances depending on their features that have numerous applications in robotics, autonomous driving, digital twinning, augmented reality, etc. The majority of the existing point cloud segmentation methods depend on class labels to identify 3D objects in the surroundings. Our work focuses on segmenting point clouds into different regions/instances in an object-agnostic manner for any number of objects in the environment. Given the point cloud, our method can segment the entire scene into multiple instances without depending on object shape and size. We leverage the power of the self-attention …

Exploring Cognition And Affect During Human-Cobot Interaction, Angelika T. Canete, Javier Gonzalez-Sanchez, Rafael Guerra Silva

College of Engineering Summer Undergraduate Research Program

Collaborative robots (Cobots) have recently gained popularity due to their capability to work collaboratively with human operators. This collaborative relationship has been named under the robotics discipline of Human-Robot Collaboration (HRC), in which humans and robots work together to accomplish a common task while also being in the same physical space. An important part of collaboration is the human's decision-making, which is largely affected by their affective and cognitive state. A cobot lacks this fundamental understanding of the human operator. In this research, we utilize a server-client program to communicate the affective states of a human user to a Raspberry …

Autonomous Shipwreck Detection & Mapping, William Ard

LSU Master's Theses

This thesis presents the development and testing of Bruce, a low-cost hybrid Remote Operated Vehicle (ROV) / Autonomous Underwater Vehicle (AUV) system for the optical survey of marine archaeological sites, as well as a novel sonar image augmentation strategy for semantic segmentation of shipwrecks. This approach takes side-scan sonar and bathymetry data collected using an EdgeTech 2205 AUV sensor integrated with an Harris Iver3, and generates augmented image data to be used for the semantic segmentation of shipwrecks. It is shown that, due to the feature enhancement capabilities of the proposed shipwreck detection strategy, correctly identified areas have a 15% …